Professional Documents
Culture Documents
Jar 3
Jar 3
The PCE Wireline Tubular Jar is designed to enable the operator to deliver effective jarring
forces in conjunction with wireline running tools, and other devices. By manipulating the
wireline at the surface, these jarring forces can be delivered in both upward and downward
directions. The effectiveness of the impact forces is largely dependant upon the weight of
the stems used above the jars and the length of the stroke of the jars. However, the size
and the straightness of the tubing, size and depth of the tools, density and viscosity of the
fluid in the tubing, well pressure and wire size are factors that contribute positively or
negatively to the impact forces obtained.
This type of jar is used mostly when jarring in debris and other foreign matter that may be
in the tubing. The jar is tubular in construction, and the tube section is perforated for fluid
bypass, to facilitate plunger movement.
This jar is especially effective in large tubing and casing since there is less tendency for
malfunction due to the buckling action of the tube as might occur with a link type jar.
Recommended placement of tubular jars in the wireline toolstring is directly below the
wireline stem.
Specifications
N.B. The tools shown on this page can be used as a part of a PCE ‘Grip Release’ Breech Lock toolstring, by using the appropriate
PCE ‘Grip Release’ Breech Lock Connector. These tools can also be supplied with Integral PCE ‘Grip Release’ Breech Lock
connections. Please contact PCE for more details.