Professional Documents
Culture Documents
Bailer 1
Bailer 1
The PCE Drive Down Bailer is a wireline service tool used to take debris from the site of
obstruction in the tubing or casing.
The PCE Drive Down Bailer consists of a top sub, bailer tube and a ball or flapper mule
shoe. The ball or flapper opens when the bailer assembly is jarred into the debris and
closes when the bailer is jarred out of the debris. The angled mule shoe helps to cut into
the debris. Standard Drive Down Bailer tubes are 5’ long.
The PCE Sample Bailer is designed to take debris samples from the site of obstruction in
the tubing. Standard Sample Bailer tubes are 2’ long.
Please specify Bailer Shoe sizes and configuration when ordering.
Specifications
*Sample *Standard
Actual O.D. Fishneck O.D. Top Connection Part Number
Tube Length SB Tube Length DD
(C)
N.B. The tools shown on this page can be used as a part of a PCE ‘Grip Release’ Breech Lock toolstring, by using the appropriate
PCE ‘Grip Release’ Breech Lock Connector. These tools can also be supplied with Integral PCE ‘Grip Release’ Breech Lock
connections. Please contact PCE for more details.