Professional Documents
Culture Documents
Catalogue Pompes - 18012016 GB PDF
Catalogue Pompes - 18012016 GB PDF
Pumps Series 1
Pumps Series 2
Pumps Series 3
Pumps Module 3
PUMPS CATALOGUE
F.T R 0152
F.T R 0003
F.T R 0009
F.T R 0011
F.T R 0030
F.T R 0005
F.T R 0029
Our pumps were studied and manufactured to bring you complete satisfaction.
They were designed with first quality materials, produced according to
modern processes and controlled by strict tests .
However, for the best use, it is absolutely necessary to make some arrangements
when mounting and when using.
The major 10 are the following:
1- Mounting
On a rigid support, fixed to the driving motor, make sure of the perfect
concentricity of the pump centering with the driving shaft (5/100 maximum, when
reading), according to the series. If the front body has a sealing (O-ring on the centering
diameter), you may oil the seal during the assembly on the machine.
The pump can be placed in whatever position.
Apart from the driving torque, no radial nor axial effort must be applied on
Dimensions readings and approximative characteristics subject to modifications.
3- Pipes
Selecting the correct pipe is very important . Apart from flexible hoses, use
preferably cold drawn stel tubes, free from calamine and oxidation inside.
Alll hoses must be properly burred and cleaned. No trace of stranger bodies
nor dust must be left; make sure of this before the mounting.
Suction hose:
It must be made in such a manner so as to get a
maximum oil speed of 2,5 m/s, less if possible, mostly for big flows.
4- Tanks
Tank capacity must be so that in maximum duty, the oil temperature must
stabilize at maximum 50 / 60 ° . The quantity of oil that can be taken to ensure the
various cycles must be taken into account.
Furthermore, it must allow the oil to clarify from the possible emulsions and consequently
to avoid the creation of emulsion.
The fluid coming back to tank must come back to tank very slowly to avoid disturbances
on the suction hose.
Tank must be perfectly clean, realized in teme plate or fitted with an hydrocarbon-
resistant inside painting.
It must be designed in order that an inspection flap allows a careful cleaning before
mounting and during maintenance.
F.T R 0152 2/4
It must be dustproof.
5- Oil filtration
To ensure the pump a good efficiency and a long life duration, the filtration of the
hydraulic fluid is indispensabl .
Do not forget that the pump and the various components of the circuit are
lubricated by the convoyad fluid.
At suction : Fit the suction hose with a suction strainer submerged in the tank,
the filtration efficiency of which shall be 125 µ.
Dimensions readings and approximative characteristics subject to modifications.
6- Air filtration
Most of the pumps are prematurely aging due to abrasion coming from external
elements to the tank . It is indispensable to fit the tank with a true air filter and not a
simple breather.
The air filter must have a 5 µ filtration efficiency.
All othe parts of the tank must be airproo .
7- Pump Protection
All hydraulic installations must have a pressure relief valve to protect the pump, and this
for each direction of rotation.
Several kinds can be employed:
- manually operated.
- differential.
- piloted.
Whatever the type, the following is required:
- quick opening.
- low opening range (lower than 20 bar)
F.T R 0152 3/4
8- Fluid to be employed
The use of an oil that has lost its lubrication properties is a cause for wear and
tear of the pump and of the circuit devices.
Temperature variations, rolling in the distribution and regulation valves cause a
molecular modification of the fluid in the more or less long-term.
The rapidity of the aging depends on the oil volume in the circuit, on the
important temperature variation and on the rolling under pressure.
According to the energy conversion rate of the circuit, it is necessary to provide
for changing oil between 500 and 1000 duty hour .
(N.B: analysis in case of a big quantity of oil).
For any further details, seek advice from our Technical Departments.
F.T R 0152 4/4
HV 46 HYSPIN
AWH 46
HYDRELF
DS 46
UNIVIS N 46 HYDRAN
TSX 46
HYSPIN ELFOLNA HYDRAN
68 AWH 68 DS 68
UNIVIS N 68
TSX 68
CARELUBE BIOHYDRAN
32 HTG 32 TMP 32
HE 46 UNIVIS BIO
SHP 46
BIOHYDRAN
TMP 46
BIOHYDRAN
68 TMP 68
PERFORMANCE FARM 4 KAPPA SUPER
OIL RECOMMENDATIONS
XR 15W-40 15W- 40 10W
OILS RX SUPER PERFORMANCE
ESSOLUBE X KAPPA SUPER
DIESELS PLUS SUPER D
301 10W 20W20
15W-40 15W-40
MOTORS
Dimensions readings and approximative characteristics subject to modifications.
PERFORMANCE
ESSOLUBE XT KAPPA SUPER
TROPHY DX
301 15W-40 15W40
15W-40
FUCHS
TYPES ISO LUBRIFIANTS
MOBIL SHELL TOTAL
INDUSTRIE
RENOLIN MOBIL AZOLL
32 TELLUS 32
EXTRA 32S DTE 24 ZS 32
RENOLIN MOBIL AZOLLA
HM 46 EXTRA 46S DTE 25
TELLUS 46
ZS 68
HV 46 RENOLIN MOBIL
EQUIGRADE 46 DTE 15 M
TELLUS
T et ST 46
EQUIVIS
ZS 46
RENOLIN MOBIL TELLUS EQUIVIS
68 EQUIGRADE 68 DTE 16 M T et ST 68 ZS 68
NATURELLE HYDROBIO
HE 46 HFE 46
TITAN TRUCK RUBIA
15W-40 S 10W
OILS TITAN
RIMULAX
DIESELS UNIVERSAL
15W - 40
HD 15W-40
MOTORS TITAN
UNIVERSAL
HD 20W-50
OILS TYPE HM : Refined mineral oils with anti-rust, anti - oxydation and anti - wear properties.
Application hydraulic systems in general. ( Max pressure 2900 PSI, Max speed 2000 RPM )
OILS TYPE HFAE , HFAS , HFB , HFC , HFD : Water emulsion in oil or synthetic fluid, consult our technical departments.
The type of elastomer and the compatibility defoinition must be subject to an agreement between the supplier
and the final customer.
As the JTEKT-HPI hydraulic pumps are designed with shafts on bush bearings ,
it is necessary to avoid any axial or radial load and , in order to obtain the
best performances and a longer life time , to pay some keen attention to the
transmission driving type .
Recommended couplings :
F.T R 0009 1/3 2/3
RECOMMENDED COUPLINGS
Pump support
- Splined shafts
Functionnal
tolerance
Pump support
RECOMMENDED COUPLINGS
Ø A and Ø B .
Functionnal
tolerance
Concentricity < 0,03 ( according to the
pump type and capacity ) .
Functionnal
tolerance
Hydraulic gear
pump
Homocinetic coupling
PROSCRIBED COUPLINGS
( Direct drive of the pump
shaft on the PTO shaft )
Hyperstatic mounting .
Hyperstatic mounting .
P P
P1 P5
T G CAUTION:
The signes XIII and XIV are valid only
T G
NB: Not all combination for the pumps with relief valve.
are feasible (see rear bodies technical data sheet
P2 P6
according to the series concerned)
P P
Pressure
T P
P Outlet
P3 T Inlet Speed of rotation
G Super charge
P T
P I
1 AA N 2 008 H
II III IV V VI VII
L
VIII
2
IX
0 C 02 N
X XI XII
100 VXX
XIII XIV
Sign Sign Sign Sign Sign Sign Sign Sign Sign Sign Sign Sign Sign
TYPE
DIRECTION of ROTATION
PRIMARY SHAFT CODE
Clockwise 1
see Data sheet
Anti clockwise 2
2 direction 3 TYPE of SHAFT
(no preferential direction)
Front Rear
2 direction 5
for super charge Inlet 1 Tapered 0 without shaft
(Preferential direction 1)
2 Straight keyed
2 direction 6
for super charge Inlet 3 Splinned
(Preferential direction 2)
4 Tang
Power take-off C Series 5 (0)43 - (0)52 - (0)62 - (0)72 - (0)83 - (0)93 - 103 - 125 - 140 - 153
U SAE threaded location (Norm J475)
Series 4 075 - 110 - 150 - 175 - 212 - 250 X without ports (with Rear body Typ A)
Module flange without tighness
* N
Module flange with tighness
* E (0) - Only for codification purposes
CAUTION:
The signes XIII and XIV are valid only
for the pumps with relief valve.
(see rear bodies technical data sheet
according to the series concerned)
Pressure
Rotation speed
SHAFT SEAL
V Viton
Pumpe P
PRIMARY SHAFT CODE
see data sheets
Dimensions readings and approximative characteristics subject to modifications.
THICK FRONT BODY WITH FRONT BEARING TYPE of SERIE CAPACITY (cc / rev)
Hard Series Series 0 0,25 - 0,50 - 0,75 - 1,00 - 1,25 - 1,50 - 2,00
without tightness on spigot joint P PORT LOCATION
Series 1 (00)1 - (00)2 - (00)3 - (00)4 - (00)5 - (00)6
JUNCTION BODY
with tightness on spigot joint R H HPI
Series 2 (00)4 - (00)6 - (00)8 - (0)10 - (0)12 - (0) 14 - (0)15 - (0)17 - (0)18 - (0)22 - (0)26 - (0)30
C Square location A Communication between suction ports
Light Series
Series 2,5 12 - 15 - 17 - 18 - 22 F Threaded ports D
without tightness on spigot joint X Independant inlet side
2,6 20 - 25 - 27 - 30 - 35 - 40 Y ISO location (Norm 6162) (Communication of leaks)
with tightness on spigot joint Z Series
S SAE location (Norm J518c) E Tightness between ports
Power take off C Series 3 (0)20 - (0)25 - (0)31 - (0)40 - (0)50 - (0)60 - (0)71 - (0)80 - (0)90 - 100
B Italian location X Adjustable relief valve internal return
N Series 5 (0)43 - (0)52 - (0)62 - (0)72 - (0)83 - (0)93 - 103 - 125 - 140 - 153
*
F.T R 0030
Module flange without tightness U SAE threaded location (Norm J475) in preceding pump
Module flange with tightness
* E Series 4 075 - 110 - 150 - 175 - 212 - 250 X without ports (with Rear body Typ A) J Junction " Module 3 "
0025 0,25 280 4060 240 3480 8000 0,37 2 0,05 0,47
0050 0,50 280 4060 240 3480 8000 0,75 4 0,10 0,94 0,42
0075 0,75 250 3625 210 3045 8000 1,12 6 0,15 1,40
0 0100
0125
1
1,25
250 3625 210 3045
200 2900 170 2465
8000
6000
1,50
1,87
8
7,5
0,20
0,25
1,87
2,34 0,45
0150 1,50 150 2175 125 1812 6000 2,25 9 0,29 2,81
1001 1,02 300 4350 255 3697 8000 1,53 8,16 0,20 1,91
1002 2,05 300 4350 255 3697 8000 3,07 16,4 0,40 3,83 0,9
4,09
300 4350 255 3697
6000
4,60
6,13
21,4
24,5
0,60
0,80
5,74
7,65
1005 5,12 200 2900 170 2465 6000 7,68 30,7 1 9,58 1,1
Dimensions readings and approximative characteristics subject to modifications.
1006 6,14 150 2175 125 1812 6000 9,21 30,7 1,20 11,49
2004 4,65 280 4060 240 3480 3500 6,97 16,2 0,91 8,70 1,6
2006 6,45 280 4060 240 3480 3500 9,67 22,5 1,26 12,07 1,6
2008 8,25 280 4060 240 3480 3500 12,37 28,8 1,62 15,43 1,7
2010 10,12 280 4060 240 3480 3500 15,18 35,3 1,98 18,93 1,7
2012 12 280 4060 240 3480 3500 18 42 2,35 22,45 1,7
2 2014
2015
13,8
15,52
250 3625 210 3045
250 3625 210 3045
3500
3500
20,7
23,25
48,3
52,5
2,71
3,04
25,81
29,03
2
2,1
2017 17,3 220 3190 190 2755 3500 25,95 60,55 3,39 32,36 2,1
2018 19,12 200 2900 170 2465 3500 28,65 66,8 3,75 35,77 2,2
2022 22,87 175 2537 150 2175 3500 34,2 79,8 4,48 42,78 2,3
2026 27,6 175 2537 150 2175 3000 41,4 82,8 5,41 51,63 2,7
2030 31,2 175 2537 150 2175 3000 46,8 93,6 6,12 58,36 2,8
2,5 2515
2517
15,52
17,3
280 4060 240 3480
280 4060 240 3480
3500
3500
23,25
25,95
52,5
60,55
3,04
3,39
29,03
32,36
2,6
2,6
2518 19,12 250 3625 215 3117 3500 28,65 66,8 3,75 35,77 2,7
2522 22,87 225 3262 190 2755 3500 34,2 79,8 4,48 42,78 2,8
2620 19,6 330 4185 280 4060 3000 29,40 58,80 3,70 36,66
2625 24,2 330 4185 280 4060 3000 36,30 72,60 4,50 45,27
2,6 2627 27,5 330 4185 280 4060 3000 41,25 82,50 5 51,25
F.T R 0005 1/2
2630 30,5 330 4185 280 4060 3000 45,75 91,50 5,70 57,05 8
2635 34,5 290 4205 250 3625 3000 51,75 103,50 6,40 64,54
2640 39,8 250 3625 210 3045 3000 59,70 119,40 7,50 74,45
2650
3020 21,1 275 3987 235 235 3000 31,65 63,3 4,14 39,47 5,6
3025 25,8 275 3987 235 235 3000 38,7 77,4 5,06 48,26 5,6
3031 32,1 275 3987 235 235 3000 48,15 96,3 6,29 60,05 5,6
3040 41,5 275 3987 235 235 3000 62,25 124,5 8,14 77,63 5,7
3 3050
3060
3071
51,65 250 3625 215 215
62,6 225 3262 190 190
2500
77,47
93,9
110,32
154,9
156,5
183,8
10,13
12,27
14,42 137,58
96,62
117,10
6,9
7
7
3080 82,95 200 2900 170 170 2200 124,42 182,4 16,26 155,17 7,1
3090 92,95 150 2175 130 130 2000 139,42 185,9 18,23 173,87 7,8
3100 103,9 150 2175 130 130 2000 155,85 207,8 20,37 194,37 8
5043 43,06 300 4350 255 3697 3000 64,59 129 8,44 80,55 14,2
5052 52,91 300 4350 255 3697 3000 79,36 158,5 10,37 98,97 14,2
Dimensions readings and approximative characteristics subject to modifications.
5062 62,75 300 4350 255 3697 3000 94,12 188 12,30 117,38 14,4
5072 72,59 300 4350 255 3697 3000 108,88 217,5 14,23 135,79 14,6
5 5083
5093
83,67
93,51
280 4060 240 3480
250 3625 210 3045
2700
2700
125,50
140,26
226
252,5
16,41
18,34
156,51
174,92
15,1
15,2
5103 103,3 250 3625 210 3045 2700 154,95 279 20,25 193,23 15,2
5125 125,5 250 3625 210 3045 2600 188,25 326 24,61 234,76 15,7
5140 140,2 250 3625 210 3045 2500 210,30 350,5 27,49 262,26 15,7
5153 153 250 3625 210 3045 2400 229,50 367,5 30 286,20 16
4075 075 200 2900 170 2465 2500 112,5 187,5 19,37 141 17
4 4110
4150
110
150
200 2900 170 2465
200 2900 170 2465
2500
2500
165
225
275
375
28,42
28,60
206
281
17,2
17,4
4175 175 175 2625 150 2175 2500 262,5 437,5 34,31 327,35 19
4212 212 150 2175 130 1885 2500 318 530 41,57 396,56 19,4
4250 250 125 1812 105 1522 2000 375 500 49,02 467,65 20
F.T R 0005 2/2
( VIII Signe )
Communication Indépendant inlet side Tightness between ports Adjustable relief valve
TYPE between suction ports internal return in
(communication of leaks)
preceding pump
DES ( Capacity of the pump without
suction ≥ half of the capacity (Oil and tank to be necessarily
POMPES of the front section)
identical)
0/0
1 / 1
2 / 2
2,5 / 1
2,5 / 2
2,5 / 2,5
2,6 / 2
2,6 / 2,5
2,6 / 2,6
3 / 1
3 / 2
3 / 2,5
3 / 3
5 / 5
4 / 4
ATTENTION: Versions 2 / 1 and 2,5 / 1 are not feasible in DCN - DCK - DUK - DWN - DZK
SERIES 0
F.T 00 1289
F.T 00 1290
F.T 00 1324
F.T 00 1415
F.T 00 1291
F.T 00 1325
F.T 00 1292
0025 0,25 280 4060 240 3480 8000 0,37 2 0,05 0,47
0050 0,50 280 4060 240 3480 8000 0,75 4 0,10 0,94 0,42
0075 0,75 250 3625 210 3045 8000 1,12 6 0,15 1,40
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
PSI
bar
P
A C E
B
Front body: A
AAN / AAK - DCN / DCK 12
18,5
Rear body: E
L- 14
P II
Sign
III
Sign
IV
Sign 0 VI
Sign
VII
Sign
VIII
Sign
IX
Sign
X
Sign
XI
Sign
XII
Sign
AAN / AAK
X X
0025
0050
0100
Dimensions readings and approximative characteristics subject to modifications.
X X 40 C15
LEGENDES
FRONT BODIES
25,5
18,5
52
7,5
30
80
66 r7
15
30
(2x) 6,5
- 0,020 - 0,020
Centering: Ø 22 - 0,041 Centering: Ø 22 - 0,041
Thickness: 4 Thickness: 4
AAN : F.T 00 1290 DCN : F.T 00 1291
AAK : F.T 00 1324 DCK : F.T 00 1325
CLS
Dimensions readings and approximative characteristics subject to modifications.
Ø 100
4 equidistants
holes M6
on Ø 89,5
+ 0,1
0
Ø 63,5
4 equidistants
holes M4
on Ø 87,5
2,5 3° 9°
+ 0,1
Internal centering: Ø 63,5 0
Thickness: 2,5
CLS : F.T 00 1415
F
(Threaded)
0025
F.T 00 1289 3/4
to M14 12 M14 12
0200 x150 x150
ØF
effective
depth G
REAR BODY
L
Standard
18,5
52
44 14
Dimensions readings and approximative characteristics subject to modifications.
DRIVING SHAFT
B01 C01
F
21 ± 0,25 F
16 5
-0
10 ± 0,1
3 - 0,006
2 - 0,025 - 0,016
4,3 - 0,1
-0
Ø7
M6
Ø8
Ø8
8 6 4
Ø7
C15
F
20 ± 0,1 - 0,006
3 - 0,016
Ø7
Ø8
F.T 00 1289 4/4
A
B
22 4 10 Direction 1
15°
r7
32,5
- 0,020
0,041
25,5
18,5
18,5
± 0,1
Ø 22 -
66
52
7,5
P2 T1 T2 P1
1 1
46
Direction 2
Dimensions readings and approximative characteristics subject to modifications.
Seals kits:
0025
0050 52,6 25,2
Nitrile: K5073819
0075
Viton: K5073820
0100
0125 59 28,4 (For manufacture to since
0150 may 1991)
0200 67,5 32,6
0025 0,25 280 4060 240 3480 8000 0,37 2 0,05 0,47
0050 0,50 280 4060 240 3480 8000 0,75 4 0,10 0,94 0,42
0075 0,75 250 3625 210 3045 8000 1,12 6 0,15 1,40
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
F.T 00 1290 1/2
P1
P3 Allowable peack pressure.
bar
PSI
P
F
(Threaded)
0025
to M14 12 M14 12
0200 x150 x150
ØF
effective
depth G
REAR BODY
Dimensions readings and approximative characteristics subject to modifications.
L
Standard
18,5
52
44 14
DRIVING SHAFT
B01 F C01
21 ± 0,25 F
16 5
-0
10 ± 0,1 3 - 0,006
2 - 0,025 - 0,016
4,3 - 0,1
-0
Ø7
M6
Ø8
Ø8
8 6 4
F.T 00 1290 2/2
Ø7
Ø 22,53 A
B
22 4 10 Direction 1
15°
r7
32,5
- 0,020
0,041
25,5
18,5
18,5
± 0,1
Ø 22 -
66
52
7,5
P2 T1 T2 P1
1 1
46
Direction 2
Dimensions readings and approximative characteristics subject to modifications.
Seals kits:
0025
0050 52,6 25,2
Nitrile: K5073819 + K100256
0075
Viton: K5073820 + K105494
0100
0125 59 28,4 (For manufacture to since
0150 may 1991)
0200 67,5 32,6
0025 0,25 280 4060 240 3480 8000 0,37 2 0,05 0,47
0050 0,50 280 4060 240 3480 8000 0,75 4 0,10 0,94 0,42
0075 0,75 250 3625 210 3045 8000 1,12 6 0,15 1,40
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
F.T 00 1324 1/2
P1
P3 Allowable peack pressure.
bar
PSI
P
F
(Threaded)
0025
to M14 12 M14 12
0200 x150 x150
ØF
effective
depth G
REAR BODY
Dimensions readings and approximative characteristics subject to modifications.
L
Standard
18,5
52
44 14
DRIVING SHAFT
B01 F C01
21 ± 0,25 F
16 5
-0
10 ± 0,1 3 - 0,006
2 - 0,025
- 0,016
4,3 - 0,1
-0
Ø7
M6
Ø8
Ø8
8 6 4
Ø7
F.T 00 1324 2/2
A
B
58 10 Ø 100
2 holes M6
effective Direction 1
depth 12
4 equidistants
holes M6
on Ø 89,5
+0,1
0
18,5
Ø 63,5
52
7,5
P2 T1 T2 P1
4 equidistants Direction 2
holes M4
1 1 on Ø 87,5
2,5
46 27,5
3° 9°
Dimension readings and approximative characteristics subject to modifications.
0025 0,25 280 4060 240 3480 8000 0,37 2 0,05 0,47
0050 0,50 280 4060 240 3480 8000 0,75 4 0,10 0,94 0,42
0075 0,75 250 3625 210 3045 8000 1,12 6 0,15 1,40
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
bar
PSI
P
F
(Threaded)
0025
to M14 12 M14 12
0200 x150 x150
ØF
effective
depth G
REAR BODY
Dimension readings and approximative characteristics subject to modifications.
L
Standard
18,5
52
44 14
DRIVING SHAFT
C15
F
20 ± 0,1 - 0,006
3 - 0,016
Ø7
Ø8
F.T 00 1415 2/2
A
22 30
4 B Direction 1
r7
15
- 0,020
0,041
18,5
18,5
18,5
Ø 22 -
52
7,5
30
52
52
7,5
1 1 C
46 Direction 2 2 holes Ø 6,5
Tightening torque
20 ± 0,2 m.daN
Dimensions readings and approximative characteristics subject to modifications.
Seals kits:
0025
0050 52,6 25,2 46
Nitrile: K5073819
0075
Viton: K5073820
0100
0125 59 28,4 52,5 (For manufacture to since
0150 may 1991)
0200 67,5 32,6 70
0025 0,25 280 4060 240 3480 8000 0,37 2 0,05 0,47
0050 0,50 280 4060 240 3480 8000 0,75 4 0,10 0,94 0,42
0075 0,75 250 3625 210 3045 8000 1,12 6 0,15 1,40
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1 = 0,75 x P3
F.T 00 1291 1/2
P1
P3 Allowable peack pressure.
bar
PSI
P
F
(Threaded)
0025
to M14 12 M14 12
0200 x150 x150
ØF
effective
depth G
REAR BODY
Dimensions readings and approximative characteristics subject to modifications.
L
Standard
18,5
52
44 14
DRIVING SHAFT
B01 F C01
21 ± 0,25 F
16 5
-0
10 ± 0,1 3 - 0,006
2 - 0,025 - 0,016
4,3 - 0,1
-0
Ø7
M6
Ø8
Ø8
F.T 00 1291 2/2
8 6 4
Ø7
Ø 22,53
A
30
22 4 B Direction 1
r7
15
- 0,020
0,041
18,5
18,5
18,5
Ø 22 -
52
7,5
30
52
52
7,5
1 1 C
46 Direction 2 2 holes Ø 6,5
Tightening torque
20 ± 0,2 N.m
Dimensions readings and approximative characteristics subject to modifications.
Seals kits:
0025
0050 52,6 25,2 46
Nitrile: K5073819 + K100256
0075
Viton: K5073820 + K105494
0100
0125 59 28,4 52,5 (For manufacture to since
0150 may 1991)
0200 67,5 32,6 70
0025 0,25 280 4060 240 3480 8000 0,37 2 0,05 0,47
0050 0,50 280 4060 240 3480 8000 0,75 4 0,10 0,94 0,42
0075 0,75 250 3625 210 3045 8000 1,12 6 0,15 1,40
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
F.T 00 1325 1/2
P1
P3 Allowable peack pressure.
bar
PSI
P
F
(Threaded)
0025
to M14 12 M14 12
0200 x150 x150
ØF
effective
depth G
REAR BODY
Dimensions readings and approximative characteristics subject to modifications.
L
Standard
18,5
52
44 14
DRIVING SHAFT
B01 F C01
21 ± 0,25 F
16 5
-0
10 ± 0,1 3 - 0,006
2 - 0,025 - 0,016
4,3 - 0,1
-0
Ø7
M6
Ø8
Ø8
8 6 4
Ø7
F.T 00 1325 2/2
A C D C E
B B
18,5
52
7,5
CALCULATION TORQUE
Q Capacity in cc / rev Calculation of the torque for one pump body: 1,59 x Q x P
= C ( N.m )
1000 x Rm
P Pressure in bar
Example : P 1 DCN 0100 F A 0075 F L 20 B01 Pressure: 0100: 200 bar Speed: 1000 RPM
Rm Mechanical efficiency 0075: 100 bar
(see catalogue C10) 1,59 x 1 x 150
= 2,4 N.m
1000 x 0,98
F.T 00 1292
F.T 10 1326
F.T 10 1295
F.T 10 1296
F.T 10 1327
F.T 10 1297
F.T 10 1328
F.T 10 1298
1001 1,02 300 4350 255 3697 8000 1,53 8,16 0,32 0,30
1002 2,05 300 4350 255 3697 8000 3,07 16,4 0,48 0,46 0,9
1003 3,07 300 4350 255 3697 7000 4,60 21,4 0,67 0,64
1004 4,09 250 3625 215 3117 6000 6,13 24,5 0,87 0,83
1005 5,12 200 2900 170 2465 6000 7,68 30,7 1,07 1,02 1,1
1006 6,14 150 2175 125 1812 6000 9,21 30,7 1,22 1,16
- Minimum 0,7 bar absolute (Maxi depressure 300 millibar with regard to the air pressure).
- Maximum 2 bar absolute or 1 bar over the air pressure.
The hereabove characteristics concern the pumps driven by elastic couplings perfectly aligned without any external
radial or axial force.
For any other coupling, see technical data sheet F.T R 0009.
For use at maximum working conditions and/or intensive cycles, thanks to consult our technical sales
service for validation.
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
PSI
bar
P
A C E
B
Front bodies: A
AAN / AAK - BAN - CBN / CBK 18
25,4
DCN / DCK
73
Rear bodies: E
L-A-X-T-V-W 18
Front body Port location Rear body
P II
Sign
III
Sign
IV
Sign 1 VI
Sign
VII
Sign
VIII
Sign
IX
Sign
X
Sign
XI
Sign
XII
Sign
DIRECTION of FLAT FRONT CAPACITY PORT LOCATION REAR BODIES DRIVING SHAFTS
ROTATION BODIES (V and VI Sign) ( VII Sign ) ( VIII Sign ) ( IX , X and XI Sign )
( II Sign ) ( III and IV Sign )
P1 P2 C F X L A X T V W J* TAPERED STRAIGHT SPLINED TANG
KEYED
10 20 30 40
AAN / AAK
X X
BAN
1001
X X
1002
1003
CBN / CBK
1004 10 B01 20 C01 30 C01 40 A01
Dimensions readings and approximative characteristics subject to modifications.
X X 1006
DCN / DCK
X X
LEGENDES
FRONT BODIES
10,5
34
34
r 10,5
26
24
14
88
88
72
70
r 10
47,6
6,52 6,52
0 - 0,02 - 0,025
Centering: Ø 50,8 - 0,05 Centering: Ø 25,35 - 0,041 Centering: Ø 35 - 0,05
DCN / DCK
Dimensions readings and approximative characteristics subject to modifications.
49
Ø 8,5 (x2) r 10
r8
8,9
40
r 7,5 38
64
- 0,025
Centering: Ø 32 - 0,05
Thickness: 4
F 1001
to
3/8"
12
3/8"
12
(Threaded) BSP BSP
1003
X
(with ports)
1001
to Only with rear body Type A
1006
F.T 10 1293 5/7
REAR BODIES
L A
Standard Rear ports
18 28 18
25,4
36,5
73
32
73
Ø9 (x2)
64 64 (4x) M6
effective depth 9,5
X T
high pressure relief valve, high pressure relief valve,
internal return external return
Dimensions readings and approximative characteristics subject to modifications.
11 18 21 11 18 21
73
73
67 18 on flats 67 12
25 on flats
1/4’ BSP
A A effective depth 11
X
B B
V W
low pressure relief valve, low pressure relief valve,
internal return external return
66 (2x) M6
18 16 effective depth 9,5
Ø16
73
73
32
17 on flats
64 10,5
64
F.T 10 1293 6/7
A A
B B
DRIVING SHAFTS
16,5 3,3
F
-0
3 - 0,025
1/4"-28UNF-2A
Ø9,9 - 0,05
± 0,25 - 0,04
2 16 6,63 - 0,09
0
11,5
Ø12
Ø11
Ø12
Ø12
Ø12
± 0,15
8,5
- 0,005
Ø10 - 0,014
6 20 5 2 6,8 8
5,6
Ø 9,73
10 5
Delivered with nut: K101719
Max. transmissible torque Max. transmissible torque involute spline to shaft Max. transmissible torque
10 x 18 x 0,5
40 N.m 25 Nm to norm NF E 22 141 - BNA 455 30 N.m
Spigot on free flanks
26 ± 0,25
F
2,5h9 11 ± 0,25
6,435 ± 0,25
M8 x 125
Ø11
Ø12
Ø12
- 0,075
9 12 5 7 4
6,8
A 82,55
B 41,25
38 6 8 Ø 64
r 10
11,1
Ø 50,8 - 0,05
25,4
-0
10,5
73
P2 T1 T2 P1
1001 1,02 300 4350 255 3697 8000 1,53 8,16 0,32 0,30
1002 2,05 300 4350 255 3697 8000 3,07 16,4 0,48 0,46 0,9
1003 3,07 300 4350 255 3697 7000 4,60 21,4 0,67 0,64
1004 4,09 250 3625 215 3117 6000 6,13 24,5 0,87 0,83
1005 5,12 200 2900 170 2465 6000 7,68 30,7 1,07 1,02 1,1
1006 6,14 150 2175 125 1812 6000 9,21 30,7 1,22 1,16
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
F.T 10 1294 1/4
bar
PSI
P
F 1001
Cotes dimensionnelles et caractéristiques approximatives sous réserves de modifications
3/8" 3/8"
to 12 12
(Threaded) BSP BSP
1003
X
(with ports) 1001
to Only with rear body Type A
1006
F.T 10 1294 2/4
L A
Standard Rear ports
18 28 18
25,4
36,5
73
32
73
Ø9 (x2)
64 64 (4x) M6
effective depth 9,5
X T
Cotes dimensionnelles et caractéristiques approximatives sous réserves de modifications
11 18 21 11 18 21
73
73
67 18 on flats 67 12
25 on flats
1/4’ BSP
A A effective depth 11
X
B B
V W
low pressure relief valve, low pressure relief valve,
internal return external return
66 (2x) M6
18 16 effective depth 9,5
Ø16
73
73
32
17 on flats
64 10,5
64
A A
F.T 10 1294 3/4
B B
2,4h9
0,05
15 ±0,25 14,8 ± 0,25 - 0,04
2 16 6,63 - 0,09
0
Ø9,9 -
11,5
Ø12
Ø12
Ø11
Ø12
Ø12
5,6 ± 0,15
- 0,005
Ø10 - 0,014
8,5
6 20 5 2 6,8 8
Ø 9,73 10 5
Delivered with nut: K101719
transmissible torque
Max. transmissible torque Max. transmissible torque involute spline to shaft Max. transmissible torque
10 x 18 x 0,5
40 N.m
N.m 25 Nm to norm NF E 22 141 - BNA 455 30 N.m
Spigot on free flanks
Cotes dimensionnelles et caractéristiques approximatives sous réserves de modifications
26 ± 0,25 F
2,5h9 11 ± 0,25
6,435 ± 0,25
M8 x 125
Ø12
Ø11
Ø12
- 0,075
9 12 5 7 4
6,8
A 82,55
B 41,25
38 6 8 Ø 64
r 10
11,1
Ø 50,8 - 0,05
25,4
-0
14
73
10,5
1001 1,02 300 4350 255 3697 8000 1,53 8,16 0,32 0,30
1002 2,05 300 4350 255 3697 8000 3,07 16,4 0,48 0,46 0,9
1003 3,07 300 4350 255 3697 7000 4,60 21,4 0,67 0,64
1004 4,09 250 3625 215 3117 6000 6,13 24,5 0,87 0,83
1005 5,12 200 2900 170 2465 6000 7,68 30,7 1,07 1,02 1,1
1006 6,14 150 2175 125 1812 6000 9,21 30,7 1,22 1,16
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
F.T 10 1326 1/4
bar
PSI
P
F 1001
Cotes dimensionnelles et caractéristiques approximatives sous réserves de modifications
3/8" 3/8"
to 12 12
(Threaded) BSP BSP
1003
X
(with ports) 1001
to Only with rear body Type A
1006
F.T 10 1326 2/4
L A
Standard Rear ports
18 28 18
25,4
36,5
73
32
73
Ø9 (x2)
64 64 (4x) M6
effective depth 9,5
X T
Cotes dimensionnelles et caractéristiques approximatives sous réserves de modifications
11 18 21 11 18 21
73
73
67 18 on flats 67 12
25 on flats
1/4’ BSP
A A effective depth 11
X
B B
V W
low pressure relief valve, low pressure relief valve,
internal return external return
66 (2x) M6
18 16 effective depth 9,5
Ø16
73
73
32
17 on flats
64 10,5
64
A A
F.T 10 1326 3/4
B B
2,4h9
0,05
15 ±0,25 14,8 ± 0,25 - 0,04
2 16 6,63 - 0,09
0
Ø9,9 -
11,5
Ø12
Ø12
Ø11
Ø12
Ø12
5,6 ± 0,15
- 0,005
Ø10 - 0,014
8,5
6 20 5 2 6,8 8
Ø 9,73 10 5
Delivered with nut: K101719
Max. transmissible
transmissible torque
torque Max. transmissible torque involute spline to shaft Max. transmissible torque
10 x 18 x 0,5
40 N.m
N.m 25 Nm to norm NF E 22 141 - BNA 455 30 N.m
Spigot on free flanks
Cotes dimensionnelles et caractéristiques approximatives sous réserves de modifications
26 ± 0,25 F
2,5h9 11 ± 0,25
6,435 ± 0,25
M8 x 125
Ø12
Ø11
Ø12
- 0,075
9 12 5 7 4
6,8
A
B 86
38 4 14 43
r8
- 0,020
- 0,041
34
25,4
26
11,1
Ø 25,32
88
72
P2 T1 T2 P1
Direction 2
1,5
Direction 1
1,5 26,25 6,5
67
52,5
68
Dimensions readings and approximative characteristics subject to modifications.
1001 1,02 300 4350 255 3697 8000 1,53 8,16 0,32 0,30
1002 2,05 300 4350 255 3697 8000 3,07 16,4 0,48 0,46 0,9
1003 3,07 300 4350 255 3697 7000 4,60 21,4 0,67 0,64
1004 4,09 250 3625 215 3117 6000 6,13 24,5 0,87 0,83
1005 5,12 200 2900 170 2465 6000 7,68 30,7 1,07 1,02 1,1
1006 6,14 150 2175 125 1812 6000 9,21 30,7 1,22 1,16
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
F.T 10 1295 1/4
bar
PSI
P
F 1001
Cotes dimensionnelles et caractéristiques approximatives sous réserves de modifications
3/8" 3/8"
to 12 12
(Threaded) BSP BSP
1003
X
(with ports) 1001
to Only with rear body Type A
1006
F.T 10 1295 2/4
L A
Standard Rear ports
18 28 18
25,4
36,5
73
32
73
Ø9 (x2)
64 64 (4x) M6
effective depth 9,5
X T
Cotes dimensionnelles et caractéristiques approximatives sous réserves de modifications
11 18 21 11 18 21
73
73
67 18 on flats 67 12
25 on flats
1/4’ BSP
A A effective depth 11
X
B B
V W
low pressure relief valve, low pressure relief valve,
internal return external return
66 (2x) M6
18 16 effective depth 9,5
Ø16
73
73
32
17 on flats
64 10,5
64
A A
F.T 10 1295 3/4
B B
2,4h9
0,05
15 ±0,25 14,8 ± 0,25 - 0,04
2 16 6,63 - 0,09
0
Ø9,9 -
11,5
Ø12
Ø12
Ø11
Ø12
Ø12
5,6 ± 0,15
- 0,005
Ø10 - 0,014
8,5
6 20 5 2 6,8 8
Ø 9,73 10 5
Delivered with nut: K101719
transmissible torque
Max. transmissible torque Max. transmissible torque involute spline to shaft Max. transmissible torque
10 x 18 x 0,5
40 N.m
N.m 25 Nm to norm NF E 22 141 - BNA 455 30 N.m
Spigot on free flanks
Cotes dimensionnelles et caractéristiques approximatives sous réserves de modifications
26 ± 0,25 F
2,5h9 11 ± 0,25
6,435 ± 0,25
M8 x 125
Ø12
Ø11
Ø12
- 0,075
9 12 5 7 4
6,8
A
B 86
38 4 14 68
34
25,4
24
- 0,025
- 0,050
11,1
70
73
73
P2 T1 T2 P1
Direction 2
1,5 1,5
35 6,5
67 Direction 1 r8
70
Dimensions readings and approximative characteristics subject to modifications.
1001 1,02 300 4350 255 3697 8000 1,53 8,16 0,32 0,30
1002 2,05 300 4350 255 3697 8000 3,07 16,4 0,48 0,46 0,9
1003 3,07 300 4350 255 3697 7000 4,60 21,4 0,67 0,64
1004 4,09 250 3625 215 3117 6000 6,13 24,5 0,87 0,83
1005 5,12 200 2900 170 2465 6000 7,68 30,7 1,07 1,02 1,1
1006 6,14 150 2175 125 1812 6000 9,21 30,7 1,22 1,16
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
F.T 10 1296 1/4
P1
P3 Allowable peack pressure.
bar
PSI
P
F 1001
Cotes dimensionnelles et caractéristiques approximatives sous réserves de modifications
3/8" 3/8"
to 12 12
(Threaded) BSP BSP
1003
X
(with ports) 1001
to Only with rear body Type A
1006
F.T 10 1296 2/4
L A
Standard Rear ports
18 28 18
25,4
36,5
73
32
73
Ø9 (x2)
64 64 (4x) M6
effective depth 9,5
X T
Cotes dimensionnelles et caractéristiques approximatives sous réserves de modifications
11 18 21 11 18 21
73
73
67 18 on flats 67 12
25 on flats
1/4’ BSP
A A effective depth 11
X
B B
V W
low pressure relief valve, low pressure relief valve,
internal return external return
66 (2x) M6
18 16 effective depth 9,5
Ø16
73
73
32
17 on flats
64 10,5
64
A A
F.T 10 1296 3/4
B B
2,4h9
0,05
15 ±0,25 14,8 ± 0,25 - 0,04
2 16 6,63 - 0,09
0
Ø9,9 -
11,5
Ø12
Ø12
Ø11
Ø12
Ø12
5,6 ± 0,15
- 0,005
Ø10 - 0,014
8,5
6 20 5 2 6,8 8
Ø 9,73 10 5
Delivered with nut: K101719
transmissible torque
Max. transmissible torque Max. transmissible torque involute spline to shaft Max. transmissible torque
10 x 18 x 0,5
40 N.m
N.m 25 Nm to norm NF E 22 141 - BNA 455 30 N.m
Spigot on free flanks
25 N.m
26 ± 0,25 F
2,5h9 11 ± 0,25
6,435 ± 0,25
M8 x 125
Ø12
Ø11
Ø12
- 0,075
9 12 5 7 4
6,8
A
B 86
38 68
4 14
34
25,4
11,1
88
Ø 35
73
70
73
P2 T1 T2 P1
Direction 2
1,5 1,5
35 6,5
67 Direction 1 r8
70
Dimensions readings and approximative characteristics subject to modifications.
1001 1,02 300 4350 255 3697 8000 1,53 8,16 0,32 0,30
1002 2,05 300 4350 255 3697 8000 3,07 16,4 0,48 0,46 0,9
1003 3,07 300 4350 255 3697 7000 4,60 21,4 0,67 0,64
1004 4,09 250 3625 215 3117 6000 6,13 24,5 0,87 0,83
1005 5,12 200 2900 170 2465 6000 7,68 30,7 1,07 1,02 1,1
1006 6,14 150 2175 125 1812 6000 9,21 30,7 1,22 1,16
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
F.T 10 1327 1/4
P1
P3 Allowable peack pressure.
bar
PSI
P
F 1001
Cotes dimensionnelles et caractéristiques approximatives sous réserves de modifications
3/8" 3/8"
to 12 12
(Threaded) BSP BSP
1003
X
(with ports) 1001
to Only with rear body Type A
1006
F.T 10 1327 2/4
L A
Standard Rear ports
18 28 18
25,4
36,5
73
32
73
Ø9 (x2)
64 64 (4x) M6
effective depth 9,5
X T
Cotes dimensionnelles et caractéristiques approximatives sous réserves de modifications
11 18 21 11 18 21
73
73
67 18 on flats 67 12
25 on flats
1/4’ BSP
A A effective depth 11
X
B B
V W
low pressure relief valve, low pressure relief valve,
internal return external return
66 (2x) M6
18 16 effective depth 9,5
Ø16
73
73
32
17 on flats
64 10,5
64
A A
F.T 10 1327 3/4
B B
0,05
± 0,25 - 0,04
2 16 6,63 - 0,09
0
Ø9,9 -
11,5
Ø12
Ø11
Ø12
Ø12
Ø12
5,6 ± 0,15
8,5
- 0,005
Ø10 - 0,014
6 20 5 2 6,8 8
Ø 9,73
10 5
Delivered with nut: K101719
Max. transmissible torque Max. transmissible torque involute spline to shaft Max. transmissible torque
10 x 18 x 0,5
40 N.m 25 Nm to norm NF E 22 141 - BNA 455 30 N.m
Spigot on free flanks
Cotes dimensionnelles et caractéristiques approximatives sous réserves de modifications
26 ± 0,25
F
2,5h9 11 ± 0,25
6,435 ± 0,25
M8 x 125
Ø11
Ø12
Ø12
- 0,075
9 12 5 7 4
6,8
A
C
49
38 4 B
24,5
Ø1
r7
5
25,4
25,4
11,1
- 0,025
- 0,050
P2 T1 T2 P1
Ø 32 f7
8,9
73
73
Direction 1 Direction 2
Couple de serrage
20 ± 0,2 N.m
Dimensions readings and approximative characteristics subject to modifications.
seals kits:
1001
1002 71,8 35,9 63,8
Nitrile: K5074037
1003
Viton: K5074038
1004
(For manufactured to since
1005 81,5 40,7 73,5
1006 October 1991)
1001 1,02 300 4350 255 3697 8000 1,53 8,16 0,32 0,30
1002 2,05 300 4350 255 3697 8000 3,07 16,4 0,48 0,46 0,9
1003 3,07 300 4350 255 3697 7000 4,60 21,4 0,67 0,64
1004 4,09 250 3625 215 3117 6000 6,13 24,5 0,87 0,83
1005 5,12 200 2900 170 2465 6000 7,68 30,7 1,07 1,02 1,1
1006 6,14 150 2175 125 1812 6000 9,21 30,7 1,22 1,16
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1 = 0,75 x P3
F.T 10 1297 1/4
P1
P3 Allowable peack pressure.
bar
PSI
P
F 1001
3/8" 3/8"
Cotes dimensionnelles et caractéristiques approximatives sous réserves de modifications
to 12 12
(Threaded) BSP BSP
1003
X
(with ports) 1001
to Only with rear body Type A
1006
F.T 10 1297 2/4
L A
Standard Rear ports
18 28 18
25,4
36,5
73
32
73
Ø9 (x2)
64 64 (4x) M6
effective depth 9,5
X T
Cotes dimensionnelles et caractéristiques approximatives sous réserves de modifications
11 18 21 11 18 21
73
73
67 18 on flats 67 12
25 on flats
1/4’ BSP
A A effective depth 11
X
B B
V W
low pressure relief valve, low pressure relief valve,
internal return external return
66 (2x) M6
18 16 effective depth 9,5
Ø16
73
73
32
17 on flats
64 10,5
64
A A
F.T 10 1297 3/4
B B
2,4h9
0,05
15 ±0,25 14,8 ± 0,25 - 0,04
2 16 6,63 - 0,09
0
Ø9,9 -
11,5
Ø12
Ø12
Ø11
Ø12
Ø12
5,6 ± 0,15
- 0,005
Ø10 - 0,014
8,5
6 20 5 2 6,8 8
Ø 9,73 10 5
Delivered with nut: K101719
transmissible torque
Max. transmissible torque Max. transmissible torque involute spline to shaft Max. transmissible torque
10 x 18 x 0,5
40 N.m
N.m 25 Nm to norm NF E 22 141 - BNA 455 30 N.m
Spigot on free flanks
Cotes dimensionnelles et caractéristiques approximatives sous réserves de modifications
26 ± 0,25 F
2,5h9 11 ± 0,25
6,435 ± 0,25
M8 x 125
Ø12
Ø11
Ø12
- 0,075
9 12 5 7 4
6,8
r7
25,4
25,4
11,1
- 0,025
- 0,050
P2 T1 T2 P1
8,9
40
73
73
Direction 1 Direction 2
Couple de serrage
20 ± 0,2 N.m
Dimensions readings and approximative characteristics subject to modifications.
seals kits:
1001
1002 71,8 35,9 63,8
Nitrile: K5074037 + K108227
1003
Viton: K5074038 + K108228
1004
(For manufactured to since
1005 81,5 40,7 73,5
1006 October 1991)
1001 1,02 300 4350 255 3697 8000 1,53 8,16 0,32 0,30
1002 2,05 300 4350 255 3697 8000 3,07 16,4 0,48 0,46 0,9
1003 3,07 300 4350 255 3697 7000 4,60 21,4 0,67 0,64
1004 4,09 250 3625 215 3117 6000 6,13 24,5 0,87 0,83
1005 5,12 200 2900 170 2465 6000 7,68 30,7 1,07 1,02 1,1
1006 6,14 150 2175 125 1812 6000 9,21 30,7 1,22 1,16
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1 = 0,75 x P3
F.T 10 1328 1/4
P1
P3 Allowable peack pressure.
bar
PSI
P
F 1001
Cotes dimensionnelles et caractéristiques approximatives sous réserves de modifications
3/8" 3/8"
to 12 12
(Threaded) BSP BSP
1003
X
(with ports) 1001
to Only with rear body Type A
1006
F.T 10 1328 2/4
L A
Standard Rear ports
18 28 18
25,4
36,5
73
32
73
Ø9 (x2)
64 64 (4x) M6
effective depth 9,5
X T
Cotes dimensionnelles et caractéristiques approximatives sous réserves de modifications
11 18 21 11 18 21
73
73
67 18 on flats 67 12
25 on flats
1/4’ BSP
A A effective depth 11
X
B B
V W
low pressure relief valve, low pressure relief valve,
internal return external return
66 (2x) M6
18 16 effective depth 9,5
Ø16
73
73
32
17 on flats
64 10,5
64
F.T 10 1328 3/4
A A
B B
2,4h9
0,05
15 ±0,25 14,8 ± 0,25 - 0,04
2 16 6,63 - 0,09
0
Ø9,9 -
11,5
Ø12
Ø12
Ø11
Ø12
Ø12
5,6 ± 0,15
- 0,005
Ø10 - 0,014
8,5
6 20 5 2 6,8 8
Ø 9,73 10 5
Delivered with nut: K101719
transmissible torque
Max. transmissible torque Max. transmissible torque involute spline to shaft Max. transmissible torque
10 x 18 x 0,5
40 N.m
N.m 25 Nm to norm NF E 22 141 - BNA 455 30 N.m
Spigot on free flanks
Cotes dimensionnelles et caractéristiques approximatives sous réserves de modifications
26 ± 0,25 F
2,5h9 11 ± 0,25
6,435 ± 0,25
M8 x 125
Ø12
Ø11
Ø12
- 0,075
9 12 5 7 4
6,8
A C D C D C E
B B B
25,4
73
11,1
ATTENTION
CALCULATION TORQUE
Q Capacity in cc / rev Calculation of the torque for one pump body: 1,59 x Q x P
= C ( N.m )
1000 x Rm
P Pressure in bar
Example : P 1 AAN 1006 C A 1004 H L 20 C01 Pressure: 1006: 175 bar Speed: 1000 RPM
Rm Mechanical efficiency 1004: 150 bar
(see catalogue C10) 1,59 x 6 x 175
= 1,91 N.m
1000 x 0,87
1,59 x 4 x 150
F.T 10 1298
= 1,09 N.m
1000 x 0,87
= 3 N.m Total torque
F.T 20 1300
F.T 20 1329
F.T 20 1366
F.T 20 1368
F.T 20 1301
Data sheet
PUMP CAN
F.T 20 1302
Data sheet
PUMP CEN
F.T 20 1303
Data sheet
PUMP CEK
F.T 20 1360
Data sheet
PUMP DBN
F.T 20 1304
Data sheet
PUMP DBK
F.T 20 1330
Data sheet
PUMP DCN
F.T 20 1305
Data sheet
PUMP DCK
F.T 20 1331
Data sheet
PUMP DUK
F.T 20 1333
Data sheet
PUMP DWN
F.T 20 1332
Data sheet
PUMP DZK
F.T 20 1362
Data sheet
MULTIPLES
PUMPS F.T 20 1306
Series
2 2004 4,65 280 4060 240 3480 3500 6,97 16,2 0,91 8,70 1,6
2006 6,45 280 4060 240 3480 3500 9,67 22,5 1,26 12,07 1,6
2008 8,25 280 4060 240 3480 3500 12,37 28,8 1,62 15,43 1,7
2010 10,12 280 4060 240 3480 3500 15,18 35,3 1,98 18,93 1,7
2012 12 280 4060 240 3480 3500 18 42 2,35 22,45 1,7
2014 13,8 250 3625 210 3045 3500 20,7 48,3 2,71 25,81 2
2015 15,52 250 3625 210 3045 3500 23,25 52,5 3,04 29,03 2,1
Series 2512 12 300 4350 255 3697 3500 18 42 2,35 22,45 2,3
2,5 2515 15,52 300 4350 240 3480 3500 23,25 52,5 3,04 29,03 2,6
Dimensions readings and approximative characteristics subject to modifications.
2517 17,3 300 4350 220 3190 3500 25,95 60,55 3,39 32,36 2,7
2518 19,12 300 4350 215 3117 3500 28,65 66,8 3,75 35,77 2,7
2522 22,87 300 4350 190 2755 3500 34,2 79,8 4,48 42,78 2,8
The pump can only run in one way rotation (Precise the direction of rotation on order).
The working cycles hereunder are possible with hydraulic mineral oil for viscosities between 12 and
150 cSt (65,2 and 700 SUS).
The minimum viscosity of 12 cSt (65,2 SUS) is available for a maximum temperature in the hydraulic circuit .
Working temperature: - 20 °C (4 °F) to + 80 °C (176 °F) (140 °C (284 °F) with Viton shaft seal).
Full flow filtration: 10 to 15 microns at the pressure port of the pump or on the return circuit.
Filtration on the suction side: 125 microns.
Pressure at the inlet of the pump:
- Minimum 0,7 bar absolute (Maxi depressure 300 millibar with regard to the air pressure).
- Maximum 2 bar absolute or 1 bar over the air pressure.
The hereabove characteristics concern the pumps driven by elastic couplings perfectly aligned without any external
radial or axial force.
For any other coupling, see technical data sheet F.T R 0009.
For use at maximum working conditions and/or intensive cycles, thanks to consult our technical sales
service for validation.
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
PSI
bar
F.T 20 1299 1/11
35
Port location (capacity): B C
104
2004 - 2006 - 2008 - 2010 - 2012 23,5 47
16,5
2014 - 2015 - 2017 - 2018 - 2022 2522 31 61,6
2026 - 2030 2515 - 2518 - 2522 38,8 77,7
Rear bodies: E
L 25,5 Flat front Port location Rear body
A 24,5 body
Dimensions readings and approximative characteristics subject to modifications.
X - T 25,5
V - W - D 24
Q 38
R 40
Rear bodies: E
L 25,5
A 24,5
X - T 25,5
Thick front Port location Rear body
F.T 20 1299 2/11
V - W - D 24 body
Q 38
R 40
P II
Sign
III
Sign
IV
Sign 2 VI
Sign
VII
Sign
VIII
Sign
IX
Sign
X
Sign
XI
Sign
XII
Sign P II
Sign
III
Sign
IV
Sign 25 VI
Sign
VII
Sign
VIII
Sign
IX
Sign
X
Sign
XI
Sign
XII
Sign
For CODIFICATION, see data sheet F.T R 0011
DIRECTION FLAT FRONT CAPACITY PORT LOCATION REAR BODIES DRIVING SHAFTS
of ROTATION BODIES (IX, X and XI Sign)
(II Sign) (III and IV Sign) (V and VI (VII Sign) (VIII Sign)
Sign) TAPERED STRAIGH SPLINED TANG
P1 P2
KEYED
H C B F U X Y L A X T V W Q AR J*
10 20 30 40
LEGENDES
AAN / AAK
DIRECTION of ROTATION
X X P1 = Clockwise
P2 = Anti clockwise
APK
PORT LOCATION
Dimensions readings and approximative characteristics subject to modifications.
H= HPI
2004 C= Square location
X X 2006 B= Italian location
2008 F= Threaded ports
BAN U= SAE threaded location
2010
(Norm J 475)
2012 X= without ports
X X
2014 Y= ISO location (Norm 6162)
X X
DWN
X X
F.T 20 1299 3/11
DIRECTION FRONT BODIES CAPACITY PORT LOCATION REAR BODIES DRIVING SHAFTS
of ROTATION (IX, X and XI Sign)
FLAT and THICK
(II Sign) (V and VI (VII Sign) (VIII Sign)
(III and IV Sign) Sign) TAPERED STRAIGH SPLINED TANG
P1 P2
KEYED
H C B F U X Y L A X T V W Q AR J*
10 20 30 40
FLAT
FRONT BODIES DUK
X X
DZK 2004
2006 40D02
Mounting with
X X
2008 block
configuration
2010 MBPS,
to contact us
2012
2014
2015
THICK
FRONT BODIES
AAP / AAR 2017
Dimensions readings and approximative characteristics subject to modifications.
2018
10 C07 20 C15
X X 2022
2026 10 C03 20 C03
X X 2512
2515
10 C05
2517
DBP / DBR
2518
2522 Mounting with
X X block
configuration
MBPS,
to contact us 10 C07 20 C15
LEGENDES
P1 = Clockwise AA* = Fixing SAE and ISO H= HPI L= Standard W= Low pressure relief valve -
P2 = Anti clockwise BA* = Fixing English and Italian C= Square location A= External flow control external pressure
CB* = Fixing French B= Italian location X= High pressure relief valve - Q= Flow control
DC*= Fixing German F= Threaded ports internal pressure Internal return
U= SAE threaded location (Norm J 475) T= High pressure relief valve - AR = with block configuration MBPS
F.T 20 1299 4/11
55,1
r12 r 14
43,8
7,86
20,1
36,79
5,5
56,72
(2x) Ø 14
84 44,46 15,94
84
66,05
0 0 - 0,036
Centering: Ø 82,55 - 0,05 Centering: Ø 101,6 - 0,05 Centering: Ø 95 - 0,071
Thickness: 6 Thickness: 6,35 Thickness: 10
AAN : Series 2 F.T 20 1300 AFN : Series 2 F.T 20 1366 APK : Series 2 F.T 20 1368
Series 2,5 F.T 25 1307 Series 2,5 F.T 25 1367 Series 2,5 F.T 25 1369
AAK : Series 2 F.T 20 1329
Series 2,5 F.T 25 1334
86
(4x) Ø 8,3 42 44,5
71,4 96,8
37,5
(2x) Ø 11
40,5
32,5
9
35
21,5
11
104
96,1
108
112
75
53,5
9
84 37,5
44,5 42
0 - 0,030 - 0,025
Centering: Ø 36,47 - 0,05 Centering: Ø 63,5 - 0,076 Centering: Ø 50 - 0,050
Thickness: 4 Thicknessr: 3,2 Thickness: 4
BAN: Series 2 F.T 20 1301 CAN : Series 2 F.T 20 1302 CEN : Series 2 F.T 20 1303
Series 2,5 F.T 25 1308 Series 2,5 F.T 25 1309 Series 2,5 F.T 25 1310
CEK : Series 2 F.T 20 1360
Series 2,5 F.T 25 1361
34,5
35
35
16,5
116
16,5
104
60
104
65,5
60
F.T 20 1299 5/11
r12 r12
DBN : Series 2 F.T 20 1304 DCN : Series 2 F.T 20 1305 DWN : Series 2 F.T 20 1332
Series 2,5 F.T 25 1311 Series 2,5 F.T 25 1312 Series 2,5 F.T 25 1337
DBK : Series 2 F.T 20 1330 DCK : Series 2 F.T 20 1331
Series 2,5 F.T 25 1335 Series 2,5 F.T 25 1336
Consult us for availability
DUK DZK
84 84
60 60
(x2) Ø11,5
(x2) Ø11,5
35
35
16,5
16,5
104
60
104
60
r12 r12
- 0,030 - 0,030
Centering: Ø 52 - 0,060 Centering: Ø 52 - 0,060
Thickness: 6 Thickness: 6
r12
42,5
34,5
116
5,5
65,5
(2x) Ø 11
84 84
0 - 0,03
- 0,036
Centering: Ø 82,55 - 0,05 Centering: Ø 85 - 0,071 Centering: Ø 80 - 0,06
Thickness: 6 Thickness: 14 Thickness: 8
AAP : Series 2 F.T 20 1339 ARP : Series 2 F.T 20 1343 DBP : Series 2 F.T 20 1347
Series 2,5 F.T 25 1340 Series 2,5 F.T 25 1344 Series 2,5 F.T 25 1348
AAR : Series 2 F.T 20 1341 ARK : Series 2 F.T 20 1345 DBR : Series 2 F.T 20 1349
Series 2,5 F.T 25 1342 Series 2,5 F.T 25 1346 Series 2,5 F.T 25 1350
F.T 20 1299 6/11
H D
2004
to 20 17,4 38 M6 12 15 17,4 38 M6 15
1 / 2 " BSP
N: 2.500055
3 / 8 " BSP
N: 2.500054
(HPI)
2012 V: 2.504026 V: 2.505994
2014
to
E
F 2004
to 3/4"
16
3/8"
12
(Threaded) BSP BSP
2012
2014 to
ØF 2030
effective depth G 2512 1" 1/2"
18 14
to BSP BSP
2522
2004 1"1/16
U
7/8"
12 14
to UNF
20 17
UNF
(Threaded 2012 2B 2B
SAE J 475)
2014 to 1"5/16 7/8"
12 14
2022 20 17
UNF UNF
2512 2B 2B
ØF 2026-2030 1"5/16 1"1/16
12 12
effective depth G 2515 to UNF
20 20
UNF
2522 2B 2B
2004
Y D to
2012
20 17,4 38 M8 14 15 17,4 38 M8 14
(ISO 6162)
2014 to
2022 26 47,6 22,4 M10 14 15 17,4 38 M8 14
2512
E
ØC
ØF 2026-2030
F.T 20 1299 7/11
X 2004
to
(without ports) 2012
Only with rear body Type A
2512
to Consult us for availability
2522
PUBLISHING 02 / 04 / 2013
084
/ 00
REAR BODIES SERIES 2 - 2,5
REAR BODIES
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
Dimensions readings and approximative characteristics subject to modifications.
84 12
(2x) M6 effective depth 14
Blank port
connector only
internal return
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 20 1299 8/11
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
Ø15,837 - 0,051
-0
4
-0
28 12 ± 0,3
3 ± 0,3
Ø 8,02
- 0,025 - 0,03
0
- 0,025
17,5 - 0,2 2,5 20 8 - 0,061
0
Ø18
Ø18
Ø18
Ø17
Ø18
± 0,15
- 0,005
- 0,014
12 12 25 6 3 8 4
9,4
25
Ø15,875
Ø16,65 3
100 N.m
+ 0,025
31 Ø 15,98
Dimensions readings and approximative characteristics subject to modifications.
± 0,3
22 3
0
3,2
-0
- 0,025 4
-0
- 0,03
2,7 ± 0,3
Ø 22,149
- 0,025
2,5 30 8 - 0,061
20
M 12 x 175
17,5 - 0,2
0
Ø17
Ø18
Ø18
Ø18
Pitch 16/32
- 0,006
- 0,017
Ø 16,65
Ø16
Ø 28
Ø18
2,5 25
0
17,5 - 0,2
0
Ø9,9
Ø18
Ø18
+ 0,098
8 + 0,040
- 0,018
30 6,5 2
0
10 5
Ø15
100 N.m
F
A08 D01 F A17 F
31 ± 0,3
3,17 - 0,05
-0
23,5 35
Ø16,98 ± 0,063
±0,3 ± 0,3
- 0,011
2,5 20
0
9/11
- 0,2
0
Ø16,5
12999/11
Ø18
Ø18
17,5
Ø18
- 0,006
- 0,017
25 6 3 32 3
201299
17 6,5
Ø16
Consult us for availability Maxi transmissible torque Maxi transmissible torque Maxi transmissible torque
F.T
previousprevious next
home homecontentscontents next main dimensions
main dimensions PUBLISHING 14 / 02 / 2013
086
/ 00
DRIVING SHAFT SERIES 2 - 2,5
10 20
69 F
F
72 56
46
F1
F2
M14 x 150
2,5 20
11 - 0,1
0
0
4 - 0,03 0
4 - 0,03
- 0,006
Ø16 - 0,017
17,5 - 0,1
0
F3 F3
Ø20
25
15,5 19,5
40
Ø 19,4
Dimensions readings and approximative characteristics subject to modifications.
50 N.m 50 N.m
ARP / ARK
C05 Taper 1 / 5
100 F
1,5 54
36,5
F1
13,67 - 0,1
M18 x 250
0
-0
5 - 0,03
F2
12,5
19 25
F.T 20 1299 10/11
70 N.m
10 20
45 F 42 F
19 29
F1
F2
M14 x 150
2,5 20
11 - 0,1
0
0
0
4 - 0,03 4 - 0,03
- 0,006
- 0,017
17,5 - 0,1
F3
0
F3
Ø16
Ø20
25
15,5 19,5
Dimensions readings and approximative characteristics subject to modifications.
50 N.m 50 N.m
F.T 20 1299 11/11
6 A 109
B Front body 106,3
12
SAE "A" Ø 95
r 12
35
- 0,05
0
11
22
Ø 82,55
16,5
104
r 12
1 1 6
86
Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
2004 4,65 280 4060 240 3480 3500 6,97 16,2 0,91 8,70 1,6
2006 6,45 280 4060 240 3480 3500 9,67 22,5 1,26 12,07 1,6
2008 8,25 280 4060 240 3480 3500 12,37 28,8 1,62 15,43 1,7
2010 10,12 280 4060 240 3480 3500 15,18 35,3 1,98 18,93 1,7
2012 12 280 4060 240 3480 3500 18 42 2,35 22,45 1,7
2014 13,8 250 3625 210 3045 3500 20,7 48,3 2,71 25,81 2
2015 15,52 250 3625 210 3045 3500 23,25 52,5 3,04 29,03 2,1
2017 17,3 220 3190 190 2755 3500 25,95 60,55 3,39 32,36 2,1
2018 19,12 200 2900 170 2465 3500 28,65 66,8 3,75 35,77 2,2
2022 22,87 175 2537 150 2175 3500 34,2 79,8 4,30 42,78 2,3
2026 27,6 175 2537 150 2175 3000 41,4 82,8 5,16 51,63 2,7
2030 31,2 175 2537 150 2175 3000 46,8 93,6 5,77 58,36 2,8
F.T 20 1300 1/4
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
PSI
bar
P
H D
2004
to 20 17,4 38 M6 12 15 17,4 38 M6 15
1 / 2 " BSP
N: 2.500055
3 / 8 " BSP
N: 2.500054
(HPI)
E 2012 V: 2.504126 V: 2.505994
20 40 M6 12 15 35 M6 12
2014 3 / 4 " BSP 1 / 2 " BSP
ØC
to
ØF 2030 N: 367141.503 N: 367141.703
effective depth G
23,5 40 M8 13 15 30 M6 13
4 holes Ø F 2030 3 / 4 " BSP 1 / 2 " BSP
N: X.367508.102 N: X.367508.202
effective depth G
F 2004
to
3/4"
16
3/8"
12
(Threaded) BSP BSP
2012
ØF 2014
effective depth G to 1" 1/2"
18 14
2022 BSP BSP
2004 1"1/16
U
7/8"
12 14
to UNF
20 17
UNF
(Threaded 2012 2B 2B
SAE J 475)
2014 1"5/16 7/8"
to 12 14
20 17
UNF UNF
2022 2B 2B
ØF 1"5/16 1"1/16
effective depth G 2026-2030 12
20 12
20
UNF UNF
2B 2B
2004
Y D to
2012
20 17,4 38 M8 14 15 17,4 38 M8 14
(ISO 6162)
2014
to 26 47,6 22,4 M10 14 15 17,4 38 M8 14
2022
E
ØC
ØF
effective depth G 2026-2030 26 52,4 26,2 M10 14 15 17,4 38 M8 14
F.T 20 1300 2/4
X 2004
(without ports)
to Only with rear body Type A
2030
Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
Dimensions readings and approximative characteristics subject to modifications.
internal return
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 20 1300 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
Ø15,837 - 0,051
-0
4
-0
28 12 ± 0,3
3 ± 0,3
Ø 8,02
- 0,025 - 0,03
0
- 0,025
17,5 - 0,2 2,5 20 8 - 0,061
0
Ø18
Ø18
Ø18
Ø17
Ø18
± 0,15
- 0,005
- 0,014
12 12 25 6 3 8 4
9,4
25
Ø15,875
Ø16,65 3
100 N.m
+ 0,025
31 ± 0,3
Ø 15,98
22 3
0
-0 -0
3,2 - 0,025 4 - 0,03
Ø 22,149
2,5 20 30
M 12 x 175
17,5 - 0,2
0
Ø18
Dimensions readings and approximative characteristics subject to modifications.
Ø18
Pitch 16/32
- 0,006
- 0,017
Ø 16,65
Ø16
C18 * F C02 F
36,5 ± 0,3
-0
4 - 0,03 15 ±0,25
- 0,05
2,5 25
0
17,5 - 0,2
0
Ø9,9
Ø18
Ø18
- 0,018
30 6,5 2
0
10 5
Ø15
100 N.m
F
A08 D01 F A17 F
31 ± 0,3
-0
3,17 - 0,05 23,5 35
Ø16,98 ± 0,063
±0,3 ± 0,3
- 0,011
2,5 20
0
17,5 - 0,2
0
Ø16,5
F.T 20 1300 4/4
Ø18
Ø18
Ø18
- 0,006
- 0,017
25 6 3 32 3
17 6,5
Ø16
Face of the
F support
Ø 83,63
6 A 109
B Front body 106,3
12
SAE "A" Ø 95
r 12
35
- 0,05
0
11
22
Ø 82,55
16,5
104
r 12
1 1 6
86
Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
2004 4,65 280 4060 240 3480 3500 6,97 16,2 0,91 8,70 1,6
2006 6,45 280 4060 240 3480 3500 9,67 22,5 1,26 12,07 1,6
2008 8,25 280 4060 240 3480 3500 12,37 28,8 1,62 15,43 1,7
2010 10,12 280 4060 240 3480 3500 15,18 35,3 1,98 18,93 1,7
2012 12 280 4060 240 3480 3500 18 42 2,35 22,45 1,7
2014 13,8 250 3625 210 3045 3500 20,7 48,3 2,71 25,81 2
2015 15,52 250 3625 210 3045 3500 23,25 52,5 3,04 29,03 2,1
2017 17,3 220 3190 190 2755 3500 25,95 60,55 3,39 32,36 2,1
2018 19,12 200 2900 170 2465 3500 28,65 66,8 3,75 35,77 2,2
2022 22,87 175 2537 150 2175 3500 34,2 79,8 4,30 42,78 2,3
2026 27,6 175 2537 150 2175 3000 41,4 82,8 5,16 51,63 2,7
2030 31,2 175 2537 150 2175 3000 46,8 93,6 5,77 58,36 2,8
F.T 20 1329 1/4
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
PSI
bar
P
H D
2004
to 20 17,4 38 M6 12 15 17,4 38 M6 15
1 / 2 " BSP
N: 2.500055
3 / 8 " BSP
N: 2.500054
(HPI)
E 2012 V: 2.504126 V: 2.505994
20 40 M6 12 15 35 M6 12
2014 3 / 4 " BSP 1 / 2 " BSP
ØC
to
ØF 2030 N: 367141.503 N: 367141.703
effective depth G
23,5 40 M8 13 15 30 M6 13
4 holes Ø F 2030 3 / 4 " BSP 1 / 2 " BSP
N: X.367508.102 N: X.367508.202
effective depth G
F 2004
to
3/4"
16
3/8"
12
(Threaded) BSP BSP
2012
ØF 2014
effective depth G to 1" 1/2"
18 14
2022 BSP BSP
2004 1"1/16
U
7/8"
12 14
to UNF
20 17
UNF
(Threaded 2012 2B 2B
SAE J 475)
2014 1"5/16 7/8"
to 12 14
20 17
UNF UNF
2022 2B 2B
ØF 1"5/16 1"1/16
effective depth G 2026-2030 12
20 12
20
UNF UNF
2B 2B
2004
Y D to
2012
20 17,4 38 M8 14 15 17,4 38 M8 14
(ISO 6162)
2014
to 26 47,6 22,4 M10 14 15 17,4 38 M8 14
2022
E
ØC
ØF
effective depth G 2026-2030 26 52,4 26,2 M10 14 15 17,4 38 M8 14
F.T 20 1329 2/4
X 2004
(without ports)
to Only with rear body Type A
2030
Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
internal return
Dimensions readings and approximative characteristics subject to modifications.
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 20 1329 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
Ø15,837 - 0,051
-0
4
-0
28 12 ± 0,3
3 ± 0,3
Ø 8,02
- 0,025 - 0,03
0
- 0,025
2,5 20 8 - 0,061
17,5 - 0,2
0
Ø18
Ø18
Ø18
Ø17
Ø18
± 0,15
- 0,005
Ø15,875 - 0,014
12 12 25 6 3 8 4
9,4
Ø16,65 25 3
100 N.m
+ 0,025
31 ± 0,3
Ø 15,98
22 3
0
-0 -0
3,2 - 0,025 4 - 0,03
Ø 22,149
2,5 20 30
M 12 x 175
17,5 - 0,2
0
Ø18
Ø18
Pitch 16/32
- 0,006
- 0,017
Ø 16,65
Ø16
C18 * F C02 F
36,5 ± 0,3
-0
4 - 0,03 15 ±0,25
- 0,05
2,5 25
0
17,5 - 0,2
0
Ø9,9
Ø18
Ø18
- 0,018
30 6,5 2
0
10 5
Ø15
100 N.m
F
A08 D01 F A17 F
31 ± 0,3
3,17 - 0,05
-0
23,5 35
Ø16,98 ± 0,063
±0,3 ± 0,3
- 0,011
2,5 20
0
17,5 - 0,2
0
Ø16,5
Ø18
Ø18
F.T 20 1329 4/4
Ø18
- 0,006
- 0,017
25 6 3 32 3
17 6,5
Ø16
A
B Ø 146
6,35 18
Ø 120
2 holes Ø 14
r 14
35
- 0,05
0
Ø 82,55
16,5
104
1 1
86
Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
2004 4,65 280 4060 240 3480 3500 6,97 16,2 0,91 8,70 1,6
2006 6,45 280 4060 240 3480 3500 9,67 22,5 1,26 12,07 1,6
2008 8,25 280 4060 240 3480 3500 12,37 28,8 1,62 15,43 1,7
2010 10,12 280 4060 240 3480 3500 15,18 35,3 1,98 18,93 1,7
2012 12 280 4060 240 3480 3500 18 42 2,35 22,45 1,7
2014 13,8 250 3625 210 3045 3500 20,7 48,3 2,71 25,81 2
2015 15,52 250 3625 210 3045 3500 23,25 52,5 3,04 29,03 2,1
2017 17,3 220 3190 190 2755 3500 25,95 60,55 3,39 32,36 2,1
2018 19,12 200 2900 170 2465 3500 28,65 66,8 3,75 35,77 2,2
2022 22,87 175 2537 150 2175 3500 34,2 79,8 4,30 42,78 2,3
2026 27,6 175 2537 150 2175 3000 41,4 82,8 5,16 51,63 2,7
2030 31,2 175 2537 150 2175 3000 46,8 93,6 5,77 58,36 2,8
F.T 20 1366 1/4
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
PSI
bar
P
H D
2004
to 20 17,4 38 M6 12 15 17,4 38 M6 15
1 / 2 " BSP
N: 2.500055
3 / 8 " BSP
N: 2.500054
(HPI)
E 2012 V: 2.504126 V: 2.505994
20 40 M6 12 15 35 M6 12
2014 3 / 4 " BSP 1 / 2 " BSP
ØC
to
ØF 2030 N: 367141.503 N: 367141.703
effective depth G
23,5 40 M8 13 15 30 M6 13
4 holes Ø F 2030 3 / 4 " BSP 1 / 2 " BSP
N: X.367508.102 N: X.367508.202
effective depth G
F 2004
to
3/4"
16
3/8"
12
(Threaded) BSP BSP
2012
ØF 2014
effective depth G to 1" 1/2"
18 14
2022 BSP BSP
2004 1"1/16
U
7/8"
12 14
to UNF
20 17
UNF
(Threaded 2012 2B 2B
SAE J 475)
2014 1"5/16 7/8"
to 12 14
20 17
UNF UNF
2022 2B 2B
ØF 1"5/16 1"1/16
effective depth G 2026-2030 12
20 12
20
UNF UNF
2B 2B
2004
Y D to
2012
20 17,4 38 M8 14 15 17,4 38 M8 14
(ISO 6162)
2014
to 26 47,6 22,4 M10 14 15 17,4 38 M8 14
2022
E
ØC
ØF
effective depth G 2026-2030 26 52,4 26,2 M10 14 15 17,4 38 M8 14
F.T 20 1366 2/4
X 2004
(without ports)
to Only with rear body Type A
2030
Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
internal return
Dimensions readings and approximative characteristics subject to modifications.
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 20 1366 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
Ø15,837 - 0,051
-0
4 - 0,03
-0
27 11 ± 0,3
3 ± 0,3
Ø 8,02
- 0,025
0
- 0,025
2,5 20 8 - 0,061
17,5 - 0,2
0
Ø18
Ø18
Ø18
Ø17
Ø18
± 0,15
- 0,005
- 0,014
12 11 25 5 3 8 3
9,4
25
Ø15,875
Ø16,65 2
100 N.m
+ 0,025
30 ± 0,3
Ø 15,98
22 2
0
-0 -0
3,2 - 0,025 4 - 0,03
Ø 22,149
2,5 20 30
M 12 x 175
17,5 - 0,2
0
Ø18
Ø18
Pitch 16/32
- 0,006
- 0,017
Ø 16,65
Ø16
C18 * F C02 F
35,5 ± 0,3
-0
4 - 0,03 14 ±0,25
- 0,05
2,5 25
0
17,5 - 0,2
0
Ø9,9
Ø18
Ø18
- 0,018
30 5,5 2
0
10 4
Ø15
100 N.m
F
A08 D01 F A17 F
30 ± 0,3
-0
3,17 - 0,05 22,5 34
Ø16,98 ± 0,063
±0,3 ± 0,3
- 0,011
2,5 20
0
17,5 - 0,2
0
Ø16,5
F.T 20 1366 4/4
Ø18
Ø18
Ø18
- 0,006
- 0,017
25 5 3 32 2
17 5,5
Ø16
Ø 95,80
3 holes Ø 9
B 51,46 47,16
10 12 5,94 r8
r 10
r8
55,1
43,8
35
- 0,036
- 0,071
7,86
20,1
Ø 95
16,5
104
36,79
56,72
T1 P1
r 10
2004 4,65 280 4060 240 3480 3500 6,97 16,2 0,91 8,70 1,6
2006 6,45 280 4060 240 3480 3500 9,67 22,5 1,26 12,07 1,6
2008 8,25 280 4060 240 3480 3500 12,37 28,8 1,62 15,43 1,7
2010 10,12 280 4060 240 3480 3500 15,18 35,3 1,98 18,93 1,7
2012 12 280 4060 240 3480 3500 18 42 2,35 22,45 1,7
2014 13,8 250 3625 210 3045 3500 20,7 48,3 2,71 25,81 2
2015 15,52 250 3625 210 3045 3500 23,25 52,5 3,04 29,03 2,1
2017 17,3 220 3190 190 2755 3500 25,95 60,55 3,39 32,36 2,1
2018 19,12 200 2900 170 2465 3500 28,65 66,8 3,75 35,77 2,2
2022 22,87 175 2537 150 2175 3500 34,2 79,8 4,30 42,78 2,3
2026 27,6 175 2537 150 2175 3000 41,4 82,8 5,16 51,63 2,7
2030 31,2 175 2537 150 2175 3000 46,8 93,6 5,77 58,36 2,8
F.T 20 1368 1/4
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
PSI
bar
P
H D
2004
to 20 17,4 38 M6 12 15 17,4 38 M6 15
1 / 2 " BSP
N: 2.500055
3 / 8 " BSP
N: 2.500054
(HPI)
E 2012 V: 2.504126 V: 2.505994
20 40 M6 12 15 35 M6 12
2014 3 / 4 " BSP 1 / 2 " BSP
ØC
to
ØF 2030 N: 367141.503 N: 367141.703
effective depth G
23,5 40 M8 13 15 30 M6 13
4 holes Ø F 2030 3 / 4 " BSP 1 / 2 " BSP
N: X.367508.102 N: X.367508.202
effective depth G
F 2004
to
3/4"
16
3/8"
12
(Threaded) BSP BSP
2012
ØF 2014
effective depth G to 1" 1/2"
18 14
2022 BSP BSP
2004 1"1/16
U
7/8"
12 14
to UNF
20 17
UNF
(Threaded 2012 2B 2B
SAE J 475)
2014 1"5/16 7/8"
to 12 14
20 17
UNF UNF
2022 2B 2B
ØF 1"5/16 1"1/16
effective depth G 2026-2030 12
20 12
20
UNF UNF
2B 2B
2004
Y D to
2012
20 17,4 38 M8 14 15 17,4 38 M8 14
(ISO 6162)
2014
to 26 47,6 22,4 M10 14 15 17,4 38 M8 14
2022
E
ØC
ØF
effective depth G 2026-2030 26 52,4 26,2 M10 14 15 17,4 38 M8 14
F.T 20 1368 2/4
X 2004
(without ports)
to Only with rear body Type A
2030
Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
internal return
Dimensions readings and approximative characteristics subject to modifications.
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 20 1368 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
F
39,8 ± 0,3
27,8
7/16"-20UNF-2A
-0
3
Ø 8,02
- 0,025
Ø18
± 0,15
12 12
9,4
Ø16,65
Suplied with nut: 100 841
250 N.m
Dimensions readings and approximative characteristics subject to modifications.
F.T 20 1368 4/4
4
A
86
B
12 4 holes Ø 8,3
35,7 35,7
- 0,05
40,5
0
35
32,5
Ø 36,47
112
16,5
104
1 1 r8
86
Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
2004 4,65 280 4060 240 3480 3500 6,97 16,2 0,91 8,70 1,6
2006 6,45 280 4060 240 3480 3500 9,67 22,5 1,26 12,07 1,6
2008 8,25 280 4060 240 3480 3500 12,37 28,8 1,62 15,43 1,7
2010 10,12 280 4060 240 3480 3500 15,18 35,3 1,98 18,93 1,7
2012 12 280 4060 240 3480 3500 18 42 2,35 22,45 1,7
2014 13,8 250 3625 210 3045 3500 20,7 48,3 2,71 25,81 2
2015 15,52 250 3625 210 3045 3500 23,25 52,5 3,04 29,03 2,1
2017 17,3 220 3190 190 2755 3500 25,95 60,55 3,39 32,36 2,1
2018 19,12 200 2900 170 2465 3500 28,65 66,8 3,75 35,77 2,2
2022 22,87 175 2537 150 2175 3500 34,2 79,8 4,30 42,78 2,3
2026 27,6 175 2537 150 2175 3000 41,4 82,8 5,16 51,63 2,7
2030 31,2 175 2537 150 2175 3000 46,8 93,6 5,77 58,36 2,8
F.T 20 1301 1/4
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
PSI
bar
P
20 40 M6 12 15 35 M6 12
2014 3 / 4 " BSP 1 / 2 " BSP
ØC
to
ØF 2030 N: 367141.503 N: 367141.703
effective depth G
to 23,5 40 M8 13 15 30 M6 13
4 holes Ø F 2030 3 / 4 " BSP 1 / 2 " BSP
N: X.367508.102 N: X.367508.202
effective depth G
F 2004
to
3/4"
16
3/8"
12
(Threaded) BSP BSP
2012
ØF 2014
effective depth G to 1" 1/2"
18 14
2022 BSP BSP
2004
Y D to
2012
20 17,4 38 M8 14 15 17,4 38 M8 14
(ISO 6162)
2014
to 26 47,6 22,4 M10 14 15 17,4 38 M8 14
E
2022
ØC
ØF
effective depth G 2026-2030 26 52,4 26,2 M10 14 15 17,4 38 M8 14
F.T 20 1301 2/4
X 2004
(without ports)
to Only with rear body Type A
2030
Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
internal return
Dimensions readings and approximative characteristics subject to modifications.
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 20 1301 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
Ø15,837 - 0,051
-0
4 - 0,03
-0
28 12 ± 0,3
3 ± 0,3
Ø 8,02
- 0,025
0
- 0,025
2,5 20 8 - 0,061
17,5 - 0,2
0
Ø18
Ø18
Ø18
Ø17
Ø18
± 0,15
- 0,005
- 0,014
12 12 25 6 3 8 4
9,4
25
Ø15,875
Ø16,65 3
100 N.m
+ 0,025
31 ± 0,3 Ø 15,98
22 3
0
-0 -0
3,2 - 0,025 4 - 0,03
Ø 22,149
2,5 20 30
M 12 x 175
17,5 - 0,2
0
Ø18
Ø18
Pitch 16/32
- 0,006
- 0,017
Ø 16,65
Ø16
C18 * F C02 F
36,5 ± 0,3
-0
4 - 0,03 15 ±0,25
- 0,05
2,5 25
0
17,5 - 0,2
0
Ø9,9
Ø18
Ø18
- 0,018
30 6,5 2
0
10 5
Ø15
100 N.m
F
A08 D01 F A17 F
31 ± 0,3
-0
3,17 - 0,05 23,5 35
Ø16,98 ± 0,063
±0,3 ± 0,3
- 0,011
2,5 20
0
- 0,2
0
Ø16,5
F.T 20 1301 4/4
Ø18
Ø18
17,5
Ø18
- 0,006
- 0,017
25 6 3 32 3
17 6,5
Ø16
Consult us for availability Maxi transmissible torque Maxi transmissible torque Maxi transmissible torque
A
86
B
3,2 12 2 holes Ø 11
r 58
r 10,5
- 0,076
- 0,03
35
19 11
108
Ø 63,5
16,5
104
1 1
86
Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
2004 4,65 280 4060 240 3480 3500 6,97 16,2 0,91 8,70 1,6
2006 6,45 280 4060 240 3480 3500 9,67 22,5 1,26 12,07 1,6
2008 8,25 280 4060 240 3480 3500 12,37 28,8 1,62 15,43 1,7
2010 10,12 280 4060 240 3480 3500 15,18 35,3 1,98 18,93 1,7
2012 12 280 4060 240 3480 3500 18 42 2,35 22,45 1,7
2014 13,8 250 3625 210 3045 3500 20,7 48,3 2,71 25,81 2
2015 15,52 250 3625 210 3045 3500 23,25 52,5 3,04 29,03 2,1
2017 17,3 220 3190 190 2755 3500 25,95 60,55 3,39 32,36 2,1
2018 19,12 200 2900 170 2465 3500 28,65 66,8 3,75 35,77 2,2
2022 22,87 175 2537 150 2175 3500 34,2 79,8 4,30 42,78 2,3
2026 27,6 175 2537 150 2175 3000 41,4 82,8 5,16 51,63 2,7
2030 31,2 175 2537 150 2175 3000 46,8 93,6 5,77 58,36 2,8
F.T 20 1302 1/4
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
PSI
bar
P
H D
2004
to 20 17,4 38 M6 12 15 17,4 38 M6 15
1 / 2 " BSP
N: 2.500055
3 / 8 " BSP
N: 2.500054
(HPI)
E 2012 V: 2.504126 V: 2.505994
20 40 M6 12 15 35 M6 12
2014 3 / 4 " BSP 1 / 2 " BSP
ØC
to
ØF 2030 N: 367141.503 N: 367141.703
effective depth G
23,5 40 M8 13 15 30 M6 13
4 holes Ø F 2030 3 / 4 " BSP 1 / 2 " BSP
N: X.367508.102 N: X.367508.202
effective depth G
F 2004
to
3/4"
16
3/8"
12
(Threaded) BSP BSP
2012
ØF 2014
effective depth G to 1" 1/2"
18 14
2022 BSP BSP
2004 1"1/16
U
7/8"
12 14
to UNF
20 17
UNF
(Threaded 2012 2B 2B
SAE J 475)
2014 1"5/16 7/8"
to 12 14
20 17
UNF UNF
2022 2B 2B
ØF 1"5/16 1"1/16
effective depth G 2026-2030 12
20 12
20
UNF UNF
2B 2B
2004
Y D to
2012
20 17,4 38 M8 14 15 17,4 38 M8 14
(ISO 6162)
2014
to 26 47,6 22,4 M10 14 15 17,4 38 M8 14
2022
E
ØC
ØF
effective depth G 2026-2030 26 52,4 26,2 M10 14 15 17,4 38 M8 14
F.T 20 1302 2/4
X 2004
(without ports)
to Only with rear body Type A
2030
Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
internal return
Dimensions readings and approximative characteristics subject to modifications.
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 20 1302 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
Ø15,837 - 0,051
-0
4
-0
28 12 ± 0,3
3 ± 0,3
Ø 8,02
- 0,025 - 0,03
0
- 0,025
17,5 - 0,2 2,5 20 8 - 0,061
0
Ø18
Ø18
Ø18
Ø17
Ø18
± 0,15
- 0,005
- 0,014
12 12 25 6 3 8 4
9,4
25
Ø15,875
Ø16,65 3
100 N.m
+ 0,025
31 ± 0,3
Ø 15,98
22 3
0
-0 -0
3,2 - 0,025 4 - 0,03
Ø 22,149
2,5 20 30
M 12 x 175
17,5 - 0,2
0
Ø18
Ø18
Dimensions readings and approximative characteristics subject to modifications.
Pitch 16/32
- 0,006
- 0,017
Ø 16,65
Ø16
C18 * F C02 F
36,5 ± 0,3
-0
4 - 0,03 15 ±0,25
- 0,05
2,5 25
0
17,5 - 0,2
0
Ø9,9
Ø18
Ø18
- 0,018
30 6,5 2
0
10 5
Ø15
100 N.m
F
A08 D01 F A17 F
31 ± 0,3
-0
3,17 - 0,05 23,5 35
Ø16,98 ± 0,063
±0,3 ± 0,3
- 0,011
2,5 20
0
17,5 - 0,2
0
Ø16,5
F.T 20 1302 4/4
Ø18
Ø18
Ø18
- 0,006
- 0,017
25 6 3 32 3
17 6,5
Ø16
A
B 42 44,5
4 6 8
37,5
9
- 0,025
- 0,050
35
21,5
Direction 1
Ø 50f7
16,5
104
53,5
9
1 1 37,5
86 44,5 42
Dimensions readings and approximative characteristics subject to modifications.
2004 4,65 280 4060 240 3480 3500 6,97 16,2 0,91 8,70 1,6
2006 6,45 280 4060 240 3480 3500 9,67 22,5 1,26 12,07 1,6
2008 8,25 280 4060 240 3480 3500 12,37 28,8 1,62 15,43 1,7
2010 10,12 280 4060 240 3480 3500 15,18 35,3 1,98 18,93 1,7
2012 12 280 4060 240 3480 3500 18 42 2,35 22,45 1,7
2014 13,8 250 3625 210 3045 3500 20,7 48,3 2,71 25,81 2
2015 15,52 250 3625 210 3045 3500 23,25 52,5 3,04 29,03 2,1
2017 17,3 220 3190 190 2755 3500 25,95 60,55 3,39 32,36 2,1
2018 19,12 200 2900 170 2465 3500 28,65 66,8 3,75 35,77 2,2
2022 22,87 175 2537 150 2175 3500 34,2 79,8 4,30 42,78 2,3
2026 27,6 175 2537 150 2175 3000 41,4 82,8 5,16 51,63 2,7
2030 31,2 175 2537 150 2175 3000 46,8 93,6 5,77 58,36 2,8
F.T 20 1303 1/4
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
PSI
bar
P
H D
2004
to 20 17,4 38 M6 12 15 17,4 38 M6 15
1 / 2 " BSP
N: 2.500055
3 / 8 " BSP
N: 2.500054
(HPI)
E 2012 V: 2.504126 V: 2.505994
20 40 M6 12 15 35 M6 12
2014 3 / 4 " BSP 1 / 2 " BSP
ØC
to
ØF 2030 N: 367141.503 N: 367141.703
effective depth G
23,5 40 M8 13 15 30 M6 13
4 holes Ø F 2030 3 / 4 " BSP 1 / 2 " BSP
N: X.367508.102 N: X.367508.202
effective depth G
F 2004
to
3/4"
16
3/8"
12
(Threaded) BSP BSP
2012
ØF 2014
effective depth G to 1" 1/2"
18 14
2022 BSP BSP
2004 1"1/16
U
7/8"
12 14
to UNF
20 17
UNF
(Threaded 2012 2B 2B
SAE J 475)
2014 1"5/16 7/8"
to 12 14
20 17
UNF UNF
2022 2B 2B
ØF 1"5/16 1"1/16
effective depth G 2026-2030 12
20 12
20
UNF UNF
2B 2B
2004
Y D to
2012
20 17,4 38 M8 14 15 17,4 38 M8 14
(ISO 6162)
2014
to 26 47,6 22,4 M10 14 15 17,4 38 M8 14
2022
E
ØC
ØF
effective depth G 2026-2030 26 52,4 26,2 M10 14 15 17,4 38 M8 14
F.T 20 1303 2/4
X 2004
(without ports)
to Only with rear body Type A
2030
Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
Dimensions readings and approximative characteristics subject to modifications.
internal return
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 20 1303 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
Ø15,837 - 0,051
-0
4
-0
26 10 ± 0,3
3 ± 0,3
Ø 8,02
- 0,025 - 0,03
0
- 0,025
2,5 20 8 - 0,061
17,5 - 0,2
0
Ø18
Ø18
Ø18
Ø17
Ø18
± 0,15
- 0,005
- 0,014
12 10 25 4 3 8 2
9,4
25
Ø15,875
Ø16,65 1
100 N.m
+ 0,025
29 ± 0,3 Ø 15,98
22 1
0
-0 -0
3,2 - 0,025 4 - 0,03
Ø 22,149
2,5 20 30
M 12 x 175
17,5 - 0,2
0
Ø18
Ø18
Pitch 16/32
- 0,006
- 0,017
Ø 16,65
Ø16
C18 * F C02 F
34,5 ± 0,3
-0
4 - 0,03 13 ±0,25
- 0,05
2,5 25
0
17,5 - 0,2
0
Ø9,9
Ø18
Ø18
- 0,018
30 4,5 2
0
10 3
Ø15
100 N.m
F
A08 D01 F A17 F
29 ± 0,3
3,17 - 0,05
-0
21,5 33
Ø16,98 ± 0,063
±0,3 ± 0,3
- 0,011
2,5 20
0
- 0,2
0
Ø16,5
F.T 20 1303 4/4
Ø18
Ø18
17,5
Ø18
- 0,006
- 0,017
25 4 3 32 1
17 4,5
Ø16
Ø 50,80
B 42 44,5
4 6 8
37,5
9
- 0,025
- 0,050
35
21,5
Direction 1
Ø 50f7
16,5
104
53,5
9
1 1 37,5
86 44,5 42
Dimensions readings and approximative characteristics subject to modifications.
2004 4,65 280 4060 240 3480 3500 6,97 16,2 0,91 8,70 1,6
2006 6,45 280 4060 240 3480 3500 9,67 22,5 1,26 12,07 1,6
2008 8,25 280 4060 240 3480 3500 12,37 28,8 1,62 15,43 1,7
2010 10,12 280 4060 240 3480 3500 15,18 35,3 1,98 18,93 1,7
2012 12 280 4060 240 3480 3500 18 42 2,35 22,45 1,7
2014 13,8 250 3625 210 3045 3500 20,7 48,3 2,71 25,81 2
2015 15,52 250 3625 210 3045 3500 23,25 52,5 3,04 29,03 2,1
2017 17,3 220 3190 190 2755 3500 25,95 60,55 3,39 32,36 2,1
2018 19,12 200 2900 170 2465 3500 28,65 66,8 3,75 35,77 2,2
2022 22,87 175 2537 150 2175 3500 34,2 79,8 4,30 42,78 2,3
2026 27,6 175 2537 150 2175 3000 41,4 82,8 5,16 51,63 2,7
2030 31,2 175 2537 150 2175 3000 46,8 93,6 5,77 58,36 2,8
F.T 20 1360 1/4
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
PSI
bar
P
H D
2004
to 20 17,4 38 M6 12 15 17,4 38 M6 15
1 / 2 " BSP
N: 2.500055
3 / 8 " BSP
N: 2.500054
(HPI)
E 2012 V: 2.504126 V: 2.505994
20 40 M6 12 15 35 M6 12
2014 3 / 4 " BSP 1 / 2 " BSP
ØC
to
ØF 2030 N: 367141.503 N: 367141.703
effective depth G
23,5 40 M8 13 15 30 M6 13
4 holes Ø F 2030 3 / 4 " BSP 1 / 2 " BSP
N: X.367508.102 N: X.367508.202
effective depth G
F 2004
to
3/4"
16
3/8"
12
(Threaded) BSP BSP
2012
ØF 2014
effective depth G to 1" 1/2"
18 14
2022 BSP BSP
2004 1"1/16
U
7/8"
12 14
to UNF
20 17
UNF
(Threaded 2012 2B 2B
SAE J 475)
2014 1"5/16 7/8"
to 12 14
20 17
UNF UNF
2022 2B 2B
ØF 1"5/16 1"1/16
effective depth G 2026-2030 12
20 12
20
UNF UNF
2B 2B
2004
Y D to
2012
20 17,4 38 M8 14 15 17,4 38 M8 14
(ISO 6162)
2014
to 26 47,6 22,4 M10 14 15 17,4 38 M8 14
2022
E
ØC
ØF
effective depth G 2026-2030 26 52,4 26,2 M10 14 15 17,4 38 M8 14
F.T 20 1303 2/4
X 2004
(without ports)
to Only with rear body Type A
2030
Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
internal return
Dimensions readings and approximative characteristics subject to modifications.
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 20 1303 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
Ø15,837 - 0,051
-0
4
-0
26 10 ± 0,3
3 ± 0,3
Ø 8,02
- 0,025 - 0,03
0
- 0,025
17,5 - 0,2 2,5 20 8 - 0,061
0
Ø18
Ø18
Ø18
Ø17
Ø18
± 0,15
- 0,005
- 0,014
12 10 25 4 3 8 2
9,4
25
Ø15,875
Ø16,65 1
100 N.m
+ 0,025
29
Ø 15,98
± 0,3
22 1
0
-0 -0
3,2 - 0,025 4 - 0,03
Ø 22,149
2,5 20 30
M 12 x 175
17,5 - 0,2
0
Ø18
Ø18
Pitch 16/32
- 0,006
- 0,017
Ø 16,65
Ø16
C18 * F C02 F
34,5 ± 0,3
-0
4 - 0,03 13 ±0,25
- 0,05
2,5 25
0
17,5 - 0,2
0
Ø9,9
Ø18
Ø18
- 0,018
30 4,5 2
0
10 3
Ø15
100 N.m
F
A08 D01 F A17 F
29 ± 0,3
3,17 - 0,05
-0
21,5 33
Ø16,98 ± 0,063
±0,3 ± 0,3
- 0,011
2,5 20
0
- 0,2
0
Ø16,5
Ø18
Ø18
17,5
F.T 20 1303 4/4
Ø18
- 0,006
- 0,017
25 4 3 32 1
17 4,5
Ø16
Consult us for availability Maxi transmissible torque Maxi transmissible torque Maxi transmissible torque
A 88
B 36 36
8 12 r 45
4 holes Ø 9
42,5
34,5
35
- 0,030
- 0,060
116
Ø 80
16,5
104
r8
1 1
86 1
Direction Direction 2
Dimensions readings and approximative characteristics subject to modifications.
2004 4,65 280 4060 240 3480 3500 6,97 16,2 0,91 8,70 1,6
2006 6,45 280 4060 240 3480 3500 9,67 22,5 1,26 12,07 1,6
2008 8,25 280 4060 240 3480 3500 12,37 28,8 1,62 15,43 1,7
2010 10,12 280 4060 240 3480 3500 15,18 35,3 1,98 18,93 1,7
2012 12 280 4060 240 3480 3500 18 42 2,35 22,45 1,7
2014 13,8 250 3625 210 3045 3500 20,7 48,3 2,71 25,81 2
2015 15,52 250 3625 210 3045 3500 23,25 52,5 3,04 29,03 2,1
2017 17,3 220 3190 190 2755 3500 25,95 60,55 3,39 32,36 2,1
2018 19,12 200 2900 170 2465 3500 28,65 66,8 3,75 35,77 2,2
2022 22,87 175 2537 150 2175 3500 34,2 79,8 4,30 42,78 2,3
2026 27,6 175 2537 150 2175 3000 41,4 82,8 5,16 51,63 2,7
2030 31,2 175 2537 150 2175 3000 46,8 93,6 5,77 58,36 2,8
F.T 20 1304 1/4
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
PSI
bar
P
H D
2004
to 20 17,4 38 M6 12 15 17,4 38 M6 15
1 / 2 " BSP
N: 2.500055
3 / 8 " BSP
N: 2.500054
(HPI)
E 2012 V: 2.504126 V: 2.505994
20 40 M6 12 15 35 M6 12
2014 3 / 4 " BSP 1 / 2 " BSP
ØC
to
ØF 2030 N: 367141.503 N: 367141.703
effective depth G
23,5 40 M8 13 15 30 M6 13
4 holes Ø F 2030 3 / 4 " BSP 1 / 2 " BSP
N: X.367508.102 N: X.367508.202
effective depth G
F 2004
to
3/4"
16
3/8"
12
(Threaded) BSP BSP
2012
ØF 2014
effective depth G to 1" 1/2"
18 14
2022 BSP BSP
2004 1"1/16
U
7/8"
12 14
to UNF
20 17
UNF
(Threaded 2012 2B 2B
SAE J 475)
2014 1"5/16 7/8"
to 12 14
20 17
UNF UNF
2022 2B 2B
ØF 1"5/16 1"1/16
effective depth G 2026-2030 12
20 12
20
UNF UNF
2B 2B
2004
Y D to
2012
20 17,4 38 M8 14 15 17,4 38 M8 14
(ISO 6162)
2014
to 26 47,6 22,4 M10 14 15 17,4 38 M8 14
2022
E
ØC
ØF
effective depth G 2026-2030 26 52,4 26,2 M10 14 15 17,4 38 M8 14
F.T 20 1304 2/4
X 2004
(without ports)
to Only with rear body Type A
2030
Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
internal return
Dimensions readings and approximative characteristics subject to modifications.
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 20 1304 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
Ø15,837 - 0,051
-0
4 - 0,03
-0
28 12 ± 0,3
3 ± 0,3
Ø 8,02
- 0,025
0
- 0,025
17,5 - 0,2 2,5 20 8 - 0,061
0
Ø18
Ø18
Ø18
Ø17
Ø18
± 0,15
- 0,005
- 0,014
12 12 25 6 3 8 4
9,4
25
Ø15,875
Ø16,65 3
100 N.m
+ 0,025
31 ± 0,3 Ø 15,98
22 3
0
-0 -0
3,2 - 0,025 4 - 0,03
Ø 22,149
2,5 30
20
M 12 x 175
17,5 - 0,2
0
Ø18
Ø18
Pitch 16/32
- 0,006
- 0,017
Ø 16,65
Ø16
C18 * F C02 F
36,5 ± 0,3
-0
4 - 0,03 15 ±0,25
- 0,05
2,5 25
0
17,5 - 0,2
0
Ø9,9
Ø18
Ø18
- 0,018
30 6,5 2
0
10 5
Ø15
100 N.m
F
A08 D01 F A17 F
31 ± 0,3
-0
3,17 - 0,05 23,5 35
Ø16,98 ± 0,063
±0,3 ± 0,3
- 0,011
2,5 20
0
17,5 - 0,2
0
Ø16,5
F.T 20 1304 4/4
Ø18
Ø18
Ø18
- 0,006
- 0,017
25 6 3 32 3
17 6,5
Ø16
A 88
Ø 80,92 B 36 36
8 12 r 45
4 holes Ø 9
42,5
34,5
35
- 0,030
- 0,060
116
Ø 80
16,5
104
r8
1 1
86 1
Direction Direction 2
Dimensions readings and approximative characteristics subject to modifications.
2004 4,65 280 4060 240 3480 3500 6,97 16,2 0,91 8,70 1,6
2006 6,45 280 4060 240 3480 3500 9,67 22,5 1,26 12,07 1,6
2008 8,25 280 4060 240 3480 3500 12,37 28,8 1,62 15,43 1,7
2010 10,12 280 4060 240 3480 3500 15,18 35,3 1,98 18,93 1,7
2012 12 280 4060 240 3480 3500 18 42 2,35 22,45 1,7
2014 13,8 250 3625 210 3045 3500 20,7 48,3 2,71 25,81 2
2015 15,52 250 3625 210 3045 3500 23,25 52,5 3,04 29,03 2,1
2017 17,3 220 3190 190 2755 3500 25,95 60,55 3,39 32,36 2,1
2018 19,12 200 2900 170 2465 3500 28,65 66,8 3,75 35,77 2,2
2022 22,87 175 2537 150 2175 3500 34,2 79,8 4,30 42,78 2,3
2026 27,6 175 2537 150 2175 3000 41,4 82,8 5,16 51,63 2,7
2030 31,2 175 2537 150 2175 3000 46,8 93,6 5,77 58,36 2,8
F.T 20 1330 1/4
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
PSI
bar
P
H D
2004
to 20 17,4 38 M6 12 15 17,4 38 M6 15
1 / 2 " BSP
N: 2.500055
3 / 8 " BSP
N: 2.500054
(HPI)
E 2012 V: 2.504126 V: 2.505994
20 40 M6 12 15 35 M6 12
2014 3 / 4 " BSP 1 / 2 " BSP
ØC
to
ØF 2030 N: 367141.503 N: 367141.703
effective depth G
23,5 40 M8 13 15 30 M6 13
4 holes Ø F 2030 3 / 4 " BSP 1 / 2 " BSP
N: X.367508.102 N: X.367508.202
effective depth G
F 2004
to
3/4"
16
3/8"
12
(Threaded) BSP BSP
2012
ØF 2014
effective depth G to 1" 1/2"
18 14
2022 BSP BSP
2004 1"1/16
U
7/8"
12 14
to UNF
20 17
UNF
(Threaded 2012 2B 2B
SAE J 475)
2014 1"5/16 7/8"
to 12 14
20 17
UNF UNF
2022 2B 2B
ØF 1"5/16 1"1/16
effective depth G 2026-2030 12
20 12
20
UNF UNF
2B 2B
2004
Y D to
2012
20 17,4 38 M8 14 15 17,4 38 M8 14
(ISO 6162)
2014
to 26 47,6 22,4 M10 14 15 17,4 38 M8 14
2022
E
ØC
ØF
effective depth G 2026-2030 26 52,4 26,2 M10 14 15 17,4 38 M8 14
F.T 20 1330 2/4
X 2004
(without ports)
to Only with rear body Type A
2030
Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
internal return
Dimensions readings and approximative characteristics subject to modifications.
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 20 1330 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
Ø15,837 - 0,051
-0
4 - 0,03
-0
28 12 ± 0,3
3 ± 0,3
Ø 8,02
- 0,025
0
- 0,025
2,5 20 8 - 0,061
17,5 - 0,2
0
Ø18
Ø18
Ø18
Ø17
Ø18
± 0,15
- 0,005
Ø15,875 - 0,014
12 12 25 6 3 8 4
9,4
Ø16,65 25 3
100 N.m
+ 0,025
31 ± 0,3
Ø 15,98
22 3
0
-0 -0
3,2 - 0,025 4 - 0,03
Ø 22,149
2,5 30
20
M 12 x 175
17,5 - 0,2
0
Ø18
Ø18
Pitch 16/32
- 0,006
- 0,017
Ø 16,65
Ø16
C18 * F C02 F
36,5 ± 0,3
-0
4 - 0,03 15 ±0,25
- 0,05
2,5 25
0
17,5 - 0,2
0
Ø9,9
Ø18
Ø18
- 0,018
30 6,5 2
0
10 5
Ø15
100 N.m
F
A08 D01 F A17 F
31 ± 0,3
3,17 - 0,05
-0
23,5 35
Ø16,98 ± 0,063
±0,3 ± 0,3
- 0,011
2,5 20
0
17,5 - 0,2
0
Ø16,5
F.T 20 1330 4/4
Ø18
Ø18
Ø18
- 0,006
- 0,017
25 6 3 32 3
17 6,5
Ø16
Tightening torque A
50 ± 0,2 N.m B
6 60
2 holes Ø 11,5
35
- 0,025
- 0,050
35
14,5
Ø 50f7
16,5
104
60
Ø20,4
104
1 1
86 1
C Direction Direction 2
Dimensions readings and approximative characteristics subject to modifications.
2004 4,65 280 4060 240 3480 3500 6,97 16,2 0,91 8,70 1,6
2006 6,45 280 4060 240 3480 3500 9,67 22,5 1,26 12,07 1,6
2008 8,25 280 4060 240 3480 3500 12,37 28,8 1,62 15,43 1,7
2010 10,12 280 4060 240 3480 3500 15,18 35,3 1,98 18,93 1,7
2012 12 280 4060 240 3480 3500 18 42 2,35 22,45 1,7
2014 13,8 250 3625 210 3045 3500 20,7 48,3 2,71 25,81 2
2015 15,52 250 3625 210 3045 3500 23,25 52,5 3,04 29,03 2,1
2017 17,3 220 3190 190 2755 3500 25,95 60,55 3,39 32,36 2,1
2018 19,12 200 2900 170 2465 3500 28,65 66,8 3,75 35,77 2,2
2022 22,87 175 2537 150 2175 3500 34,2 79,8 4,30 42,78 2,3
2026 27,6 175 2537 150 2175 3000 41,4 82,8 5,16 51,63 2,7
2030 31,2 175 2537 150 2175 3000 46,8 93,6 5,77 58,36 2,8
F.T 20 1305 1/4
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
PSI
bar
P
H D
2004
to 20 17,4 38 M6 12 15 17,4 38 M6 15
1 / 2 " BSP
N: 2.500055
3 / 8 " BSP
N: 2.500054
(HPI)
E 2012 V: 2.504126 V: 2.505994
20 40 M6 12 15 35 M6 12
2014 3 / 4 " BSP 1 / 2 " BSP
ØC
to
ØF 2030 N: 367141.503 N: 367141.703
effective depth G
23,5 40 M8 13 15 30 M6 13
4 holes Ø F 2030 3 / 4 " BSP 1 / 2 " BSP
N: X.367508.102 N: X.367508.202
effective depth G
F 2004
to
3/4"
16
3/8"
12
(Threaded) BSP BSP
2012
ØF 2014
effective depth G to 1" 1/2"
18 14
2022 BSP BSP
2004 1"1/16
U
7/8"
12 14
to UNF
20 17
UNF
(Threaded 2012 2B 2B
SAE J 475)
2014 1"5/16 7/8"
to 12 14
20 17
UNF UNF
2022 2B 2B
ØF 1"5/16 1"1/16
effective depth G 2026-2030 12
20 12
20
UNF UNF
2B 2B
2004
Y D to
2012
20 17,4 38 M8 14 15 17,4 38 M8 14
(ISO 6162)
2014
to 26 47,6 22,4 M10 14 15 17,4 38 M8 14
2022
E
ØC
ØF
effective depth G 2026-2030 26 52,4 26,2 M10 14 15 17,4 38 M8 14
F.T 20 1305 2/4
X 2004
(without ports)
to Only with rear body Type A
2030
Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
internal return
Dimensions readings and approximative characteristics subject to modifications.
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 20 1305 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
Ø15,837 - 0,051
-0
4 - 0,03
-0
30 14 ± 0,3
3 ± 0,3
Ø 8,02
- 0,025
0
- 0,025
2,5 20 8 - 0,061
17,5 - 0,2
0
Ø18
Ø18
Ø18
Ø17
Ø18
± 0,15
- 0,005
- 0,014
12 14 25 8 3 8 6
9,4
25
Ø15,875
Ø16,65 5
100 N.m
+ 0,025
33
Ø 15,98
± 0,3
22 5
0
-0 -0
3,2 - 0,025 4 - 0,03
Ø 22,149
2,5 20 30
M 12 x 175
17,5 - 0,2
0
Ø18
Ø18
Pitch 16/32
- 0,006
- 0,017
Ø 16,65
Ø16
C18 * F C02 F
38,5 ± 0,3
-0
4 - 0,03 17 ±0,25
- 0,05
2,5 25
0
17,5 - 0,2
0
Ø9,9
Ø18
Ø18
- 0,018
30 8,5 2
0
10 7
Ø15
100 N.m
F
A08 D01 F A17 F
33 ± 0,3
-0
3,17 - 0,05 25,5 37
Ø16,98 ± 0,063
±0,3 ± 0,3
- 0,011
2,5 20
0
- 0,2
0
Ø16,5
Ø18
Ø18
17,5
Ø18
F.T 20 1305 4/4
- 0,006
- 0,017
25 8 3 32 5
17 8,5
Ø16
Tightening torque A
50 ± 0,2 N.m Ø 50,80 B
6 60
2 holes Ø 11,5
35
- 0,025
- 0,050
35
14,5
Ø 50f7
16,5
104
60
Ø20,4
104
1 1
86 1
C Direction Direction 2
Dimensions readings and approximative characteristics subject to modifications.
2004 4,65 280 4060 240 3480 3500 6,97 16,2 0,91 8,70 1,6
2006 6,45 280 4060 240 3480 3500 9,67 22,5 1,26 12,07 1,6
2008 8,25 280 4060 240 3480 3500 12,37 28,8 1,62 15,43 1,7
2010 10,12 280 4060 240 3480 3500 15,18 35,3 1,98 18,93 1,7
2012 12 280 4060 240 3480 3500 18 42 2,35 22,45 1,7
2014 13,8 250 3625 210 3045 3500 20,7 48,3 2,71 25,81 2
2015 15,52 250 3625 210 3045 3500 23,25 52,5 3,04 29,03 2,1
2017 17,3 220 3190 190 2755 3500 25,95 60,55 3,39 32,36 2,1
2018 19,12 200 2900 170 2465 3500 28,65 66,8 3,75 35,77 2,2
2022 22,87 175 2537 150 2175 3500 34,2 79,8 4,30 42,78 2,3
2026 27,6 175 2537 150 2175 3000 41,4 82,8 5,16 51,63 2,7
2030 31,2 175 2537 150 2175 3000 46,8 93,6 5,77 58,36 2,8
F.T 20 1331 1/4
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
PSI
bar
P
H D
2004
to 20 17,4 38 M6 12 15 17,4 38 M6 15
1 / 2 " BSP
N: 2.500055
3 / 8 " BSP
N: 2.500054
(HPI)
E 2012 V: 2.504126 V: 2.505994
20 40 M6 12 15 35 M6 12
2014 3 / 4 " BSP 1 / 2 " BSP
ØC
to
ØF 2030 N: 367141.503 N: 367141.703
effective depth G
23,5 40 M8 13 15 30 M6 13
4 holes Ø F 2030 3 / 4 " BSP 1 / 2 " BSP
N: X.367508.102 N: X.367508.202
effective depth G
F 2004
to
3/4"
16
3/8"
12
(Threaded) BSP BSP
2012
ØF 2014
effective depth G to 1" 1/2"
18 14
2022 BSP BSP
2004 1"1/16
U
7/8"
12 14
to UNF
20 17
UNF
(Threaded 2012 2B 2B
SAE J 475)
2014 1"5/16 7/8"
to 12 14
20 17
UNF UNF
2022 2B 2B
ØF 1"5/16 1"1/16
effective depth G 2026-2030 12
20 12
20
UNF UNF
2B 2B
2004
Y D to
2012
20 17,4 38 M8 14 15 17,4 38 M8 14
(ISO 6162)
2014
to 26 47,6 22,4 M10 14 15 17,4 38 M8 14
2022
E
ØC
ØF
effective depth G 2026-2030 26 52,4 26,2 M10 14 15 17,4 38 M8 14
F.T 20 1331 2/4
X 2004
(without ports)
to Only with rear body Type A
2030
Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
internal return
Dimensions readings and approximative characteristics subject to modifications.
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 20 1331 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
Ø15,837 - 0,051
-0
4 - 0,03
-0
30 14 ± 0,3
3 ± 0,3
Ø 8,02
- 0,025
0
- 0,025
2,5 20 8 - 0,061
17,5 - 0,2
0
Ø18
Ø18
Ø18
Ø17
Ø18
± 0,15
- 0,005
- 0,014
12 14 25 8 3 8 6
9,4
25
Ø15,875
Ø16,65 5
100 N.m
+ 0,025
33
Ø 15,98
± 0,3
22 5
0
-0 -0
3,2 - 0,025 4 - 0,03
Ø 22,149
2,5 20 30
M 12 x 175
17,5 - 0,2
0
Ø18
Ø18
Pitch 16/32
- 0,006
- 0,017
Ø 16,65
Ø16
C18 * F C02 F
38,5 ± 0,3
-0
4 - 0,03 17 ±0,25
- 0,05
2,5 25
0
17,5 - 0,2
0
Ø9,9
Ø18
Ø18
- 0,018
30 8,5 2
0
10 7
Ø15
100 N.m
F
A08 D01 F A17 F
33 ± 0,3
-0
3,17 - 0,05 25,5 37
Ø16,98 ± 0,063
±0,3 ± 0,3
- 0,011
2,5 20
0
17,5 - 0,2
0
Ø16,5
Ø18
Ø18
Ø18
F.T 20 1331 4/4
- 0,006
- 0,017
25 8 3 32 5
17 8,5
Ø16
Ø 53,04
Tightening torque A
50 ± 0,2 N.m B
6 60
2 holes Ø 11,5
35
- 0,030
- 0,060
35
14,5
Ø 52f7
16,5
104
60
Ø20,4
104
1 1
86
C Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
2004 4,65 280 4060 240 3480 3500 6,97 16,2 0,91 8,70 1,6
2006 6,45 280 4060 240 3480 3500 9,67 22,5 1,26 12,07 1,6
2008 8,25 280 4060 240 3480 3500 12,37 28,8 1,62 15,43 1,7
2010 10,12 280 4060 240 3480 3500 15,18 35,3 1,98 18,93 1,7
2012 12 280 4060 240 3480 3500 18 42 2,35 22,45 1,7
2014 13,8 250 3625 210 3045 3500 20,7 48,3 2,71 25,81 2
2015 15,52 250 3625 210 3045 3500 23,25 52,5 3,04 29,03 2,1
2017 17,3 220 3190 190 2755 3500 25,95 60,55 3,39 32,36 2,1
2018 19,12 200 2900 170 2465 3500 28,65 66,8 3,75 35,77 2,2
2022 22,87 175 2537 150 2175 3500 34,2 79,8 4,30 42,78 2,3
2026 27,6 175 2537 150 2175 3000 41,4 82,8 5,16 51,63 2,7
2030 31,2 175 2537 150 2175 3000 46,8 93,6 5,77 58,36 2,8
Min. 10 s
F.T 20 1333 1/4
P1
P3 Allowable peack pressure.
PSI
bar
P
H D
2004
to 20 17,4 38 M6 12 15 17,4 38 M6 15
1 / 2 " BSP
N: 2.500055
3 / 8 " BSP
N: 2.500054
(HPI)
E 2012 V: 2.504126 V: 2.505994
20 40 M6 12 15 35 M6 12
2014 3 / 4 " BSP 1 / 2 " BSP
ØC
to
ØF 2030 N: 367141.503 N: 367141.703
effective depth G
23,5 40 M8 13 15 30 M6 13
4 holes Ø F 2030 3 / 4 " BSP 1 / 2 " BSP
N: X.367508.102 N: X.367508.202
effective depth G
F 2004
to
3/4"
16
3/8"
12
(Threaded) BSP BSP
2012
ØF 2014
effective depth G to 1" 1/2"
18 14
2022 BSP BSP
2004 1"1/16
U
7/8"
12 14
to UNF
20 17
UNF
(Threaded 2012 2B 2B
SAE J 475)
2014 1"5/16 7/8"
to 12 14
20 17
UNF UNF
2022 2B 2B
ØF 1"5/16 1"1/16
effective depth G 2026-2030 12
20 12
20
UNF UNF
2B 2B
2004
Y D to
2012
20 17,4 38 M8 14 15 17,4 38 M8 14
(ISO 6162)
2014
to 26 47,6 22,4 M10 14 15 17,4 38 M8 14
2022
E
ØC
ØF
effective depth G 2026-2030 26 52,4 26,2 M10 14 15 17,4 38 M8 14
F.T 20 1333 2/4
X 2004
(without ports)
to Only with rear body Type A
2030
Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
Dimensions readings and approximative characteristics subject to modifications.
internal return
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 20 1333 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
D02
F
2,7 ± 0,3
- 0,025
8 - 0,061
Ø17
Ø18
6,5
70 N.m
+ 0,098
8 + 0,040 12 Ø18
Ø 28
Ø18
+ 0,098
8
Dimensions readings and approximative characteristics subject to modifications.
+ 0,040
F.T 20 1333 4/4
Tightening torque A
50 ± 0,2 N.m C
6 60
B
35
- 0,025
- 0,050
35
14,5
Ø 50f7
16,5
104
60
104
P2 T1 T2 P1
Ø20,4
2 holes Ø 11,5
2004 4,65 280 4060 240 3480 3500 6,97 16,2 0,91 8,70 1,6
2006 6,45 280 4060 240 3480 3500 9,67 22,5 1,26 12,07 1,6
2008 8,25 280 4060 240 3480 3500 12,37 28,8 1,62 15,43 1,7
2010 10,12 280 4060 240 3480 3500 15,18 35,3 1,98 18,93 1,7
2012 12 280 4060 240 3480 3500 18 42 2,35 22,45 1,7
2014 13,8 250 3625 210 3045 3500 20,7 48,3 2,71 25,81 2
2015 15,52 250 3625 210 3045 3500 23,25 52,5 3,04 29,03 2,1
2017 17,3 220 3190 190 2755 3500 25,95 60,55 3,39 32,36 2,1
2018 19,12 200 2900 170 2465 3500 28,65 66,8 3,75 35,77 2,2
2022 22,87 175 2537 150 2175 3500 34,2 79,8 4,30 42,78 2,3
2026 27,6 175 2537 150 2175 3000 41,4 82,8 5,16 51,63 2,7
2030 31,2 175 2537 150 2175 3000 46,8 93,6 5,77 58,36 2,8
F.T 20 1332 1/4
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
PSI
bar
P
H D
2004
to 20 17,4 38 M6 12 15 17,4 38 M6 15
1 / 2 " BSP
N: 2.500055
3 / 8 " BSP
N: 2.500054
(HPI)
E 2012 V: 2.504126 V: 2.505994
20 40 M6 12 15 35 M6 12
2014 3 / 4 " BSP 1 / 2 " BSP
ØC
to
ØF 2030 N: 367141.503 N: 367141.703
effective depth G
23,5 40 M8 13 15 30 M6 13
4 holes Ø F 2030 3 / 4 " BSP 1 / 2 " BSP
N: X.367508.102 N: X.367508.202
effective depth G
F 2004
to
3/4"
16
3/8"
12
(Threaded) BSP BSP
2012
ØF 2014
effective depth G to 1" 1/2"
18 14
2022 BSP BSP
2004 1"1/16
U
7/8"
12 14
to UNF
20 17
UNF
(Threaded 2012 2B 2B
SAE J 475)
2014 1"5/16 7/8"
to 12 14
20 17
UNF UNF
2022 2B 2B
ØF 1"5/16 1"1/16
effective depth G 2026-2030 12
20 12
20
UNF UNF
2B 2B
2004
Y D to
2012
20 17,4 38 M8 14 15 17,4 38 M8 14
(ISO 6162)
2014
to 26 47,6 22,4 M10 14 15 17,4 38 M8 14
2022
E
ØC
ØF
effective depth G 2026-2030 26 52,4 26,2 M10 14 15 17,4 38 M8 14
F.T 20 1332 2/4
X 2004
(without ports)
to Only with rear body Type A
2030
Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
internal return
Dimensions readings and approximative characteristics subject to modifications.
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 20 1332 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
Ø15,837 - 0,051
-0
4 - 0,03
-0
30 14 ± 0,3
3 ± 0,3
Ø 8,02
- 0,025
0
- 0,025
2,5 20 8 - 0,061
17,5 - 0,2
0
Ø18
Ø18
Ø18
Ø17
Ø18
± 0,15
- 0,005
- 0,014
12 14 25 8 3 8 6
9,4
25
Ø15,875
Ø16,65 5
100 N.m
+ 0,025
33
Ø 15,98
± 0,3
22 5
0
-0 -0
3,2 - 0,025 4 - 0,03
Ø 22,149
2,5 20 30
M 12 x 175
17,5 - 0,2
0
Ø18
Ø18
Pitch 16/32
- 0,006
- 0,017
Ø 16,65
Ø16
C18 * F C02 F
38,5 ± 0,3
-0
4 - 0,03 17 ±0,25
- 0,05
2,5 25
0
17,5 - 0,2
0
Ø9,9
Ø18
Ø18
- 0,018
30 8,5 2
0
10 7
Ø15
100 N.m
F
A08 D01 F A17 F
33 ± 0,3
-0
3,17 - 0,05 25,5 37
Ø16,98 ± 0,063
±0,3 ± 0,3
- 0,011
2,5 20
0
- 0,2
0
Ø16,5
Ø18
Ø18
17,5
Ø18
F.T 20 1332 4/4
- 0,006
- 0,017
25 8 3 32 5
17 8,5
Ø16
A
Ø 53,04
Tightening torque
C
50 ± 0,2 N.m 6
B 60
2 holes Ø 11,5
35
- 0,030
- 0,060
35
14,5
Ø 52f7
16,5
104
104
60
P2 T1 T2 P1
1 1
86 Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
2004 4,65 280 4060 240 3480 3500 6,97 16,2 0,91 8,70 1,6
2006 6,45 280 4060 240 3480 3500 9,67 22,5 1,26 12,07 1,6
2008 8,25 280 4060 240 3480 3500 12,37 28,8 1,62 15,43 1,7
2010 10,12 280 4060 240 3480 3500 15,18 35,3 1,98 18,93 1,7
2012 12 280 4060 240 3480 3500 18 42 2,35 22,45 1,7
2014 13,8 250 3625 210 3045 3500 20,7 48,3 2,71 25,81 2
2015 15,52 250 3625 210 3045 3500 23,25 52,5 3,04 29,03 2,1
2017 17,3 220 3190 190 2755 3500 25,95 60,55 3,39 32,36 2,1
2018 19,12 200 2900 170 2465 3500 28,65 66,8 3,75 35,77 2,2
2022 22,87 175 2537 150 2175 3500 34,2 79,8 4,30 42,78 2,3
2026 27,6 175 2537 150 2175 3000 41,4 82,8 5,16 51,63 2,7
2030 31,2 175 2537 150 2175 3000 46,8 93,6 5,77 58,36 2,8
F.T 20 1362 1/4
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
PSI
bar
P
H D
2004
to 20 17,4 38 M6 12 15 17,4 38 M6 15
1 / 2 " BSP
N: 2.500055
3 / 8 " BSP
N: 2.500054
(HPI)
E 2012 V: 2.504126 V: 2.505994
20 40 M6 12 15 35 M6 12
2014 3 / 4 " BSP 1 / 2 " BSP
ØC
to
ØF 2030 N: 367141.503 N: 367141.703
effective depth G
23,5 40 M8 13 15 30 M6 13
4 holes Ø F 2030 3 / 4 " BSP 1 / 2 " BSP
N: X.367508.102 N: X.367508.202
effective depth G
F 2004
to
3/4"
16
3/8"
12
(Threaded) BSP BSP
2012
ØF 2014
effective depth G to 1" 1/2"
18 14
2022 BSP BSP
2004 1"1/16
U
7/8"
12 14
to UNF
20 17
UNF
(Threaded 2012 2B 2B
SAE J 475)
2014 1"5/16 7/8"
to 12 14
20 17
UNF UNF
2022 2B 2B
ØF 1"5/16 1"1/16
effective depth G 2026-2030 12
20 12
20
UNF UNF
2B 2B
2004
Y D to
2012
20 17,4 38 M8 14 15 17,4 38 M8 14
(ISO 6162)
2014
to 26 47,6 22,4 M10 14 15 17,4 38 M8 14
2022
E
ØC
ØF
effective depth G 2026-2030 26 52,4 26,2 M10 14 15 17,4 38 M8 14
F.T 20 1362 2/4
X 2004
(without ports)
to Only with rear body Type A
2030
Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
internal return
Dimensions readings and approximative characteristics subject to modifications.
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 20 1362 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
D02
F
2,7 ± 0,3
- 0,025
8 - 0,061
Ø17
Ø18
6,5
70 N.m
+ 0,098
8 + 0,040 12 Ø18
Ø 28
Ø18
+ 0,098
8
Dimensions readings and approximative characteristics subject to modifications.
+ 0,040
F.T 20 1362 4/4
F.T 20 1339
F.T 20 1341
F.T 20 1343
F.T 20 1345
F.T 20 1347
F.T 20 1349
MULTIPLES
Data sheet
PUMPS
F.T 20 1306
6 109
A
B 106,3
12
Ø 95
r 12
35
- 0,05
0
11
Ø 82,55
16,5
104
Ø 65
1 1 35 28
86
Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
2004 4,65 280 4060 240 3480 3500 6,97 16,2 0,91 8,70 2,7
2006 6,45 280 4060 240 3480 3500 9,67 22,5 1,26 12,07 2,7
2008 8,25 280 4060 240 3480 3500 12,37 28,8 1,62 15,43 2,8
2010 10,12 280 4060 240 3480 3500 15,18 35,3 1,98 18,93 2,8
2012 12 280 4060 240 3480 3500 18 42 2,35 22,45 2,8
2014 13,8 250 3625 210 3045 3500 20,7 48,3 2,71 25,81 3
2015 15,52 250 3625 210 3045 3500 23,25 52,5 3,04 29,03 3,1
2017 17,3 220 3190 190 2755 3500 25,95 60,55 3,39 32,36 3,2
2018 19,12 200 2900 170 2465 3500 28,65 66,8 3,75 35,77 3,3
2022 22,87 175 2537 150 2175 3500 34,2 79,8 4,30 42,78 3,4
2026 27,6 175 2537 150 2175 3000 41,4 82,8 5,16 51,63 3,8
2030 31,2 175 2537 150 2175 3000 46,8 93,6 5,77 58,36 3,9
F.T 20 1339 1/4
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
PSI
bar
P
H D
2004
to 20 17,4 38 M6 12 15 17,4 38 M6 15
1 / 2 " BSP
N: 2.500055
3 / 8 " BSP
N: 2.500054
(HPI)
E 2012 V: 2.504126 V: 2.505994
20 40 M6 12 15 35 M6 12
2014 3 / 4 " BSP 1 / 2 " BSP
ØC
to
ØF 2030 N: 367141.503 N: 367141.703
effective depth G
23,5 40 M8 13 15 30 M6 13
4 holes Ø F 2030 3 / 4 " BSP 1 / 2 " BSP
N: X.367508.102 N: X.367508.202
effective depth G
F 2004
to
3/4"
16
3/8"
12
(Threaded) BSP BSP
2012
ØF 2014
effective depth G to 1" 1/2"
18 14
2022 BSP BSP
2004 1"1/16
U
7/8"
12 14
to UNF
20 17
UNF
(Threaded 2012 2B 2B
SAE J 475)
2014 1"5/16 7/8"
to 12 14
20 17
UNF UNF
2022 2B 2B
ØF 1"5/16 1"1/16
effective depth G 2026-2030 12
20 12
20
UNF UNF
2B 2B
2004
Y D to
2012
20 17,4 38 M8 14 15 17,4 38 M8 14
(ISO 6162)
2014
to 26 47,6 22,4 M10 14 15 17,4 38 M8 14
2022
E
ØC
ØF
effective depth G 2026-2030 26 52,4 26,2 M10 14 15 17,4 38 M8 14
F.T 20 1339 2/4
X 2004
(without ports)
to Only with rear body Type A
2030
Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
internal return
Dimensions readings and approximative characteristics subject to modifications.
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 20 1339 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
10 20
C03 C03
Taper 1/5
72 F 69 F
46 56
F2 F1
M14 x 150
2,5 20
11 - 0,1
0
0
4 - 0,03 0
4 - 0,03
- 0,006
- 0,017
17,5 - 0,1
0
F3 F3
Ø20
Ø16
25
15,5 19,5
40
Ø 19,4
50 N.m 50 N.m
F.T 20 1339 4/4
Ø 83,63
of the front body SAE "A"
6 109
A
B 106,3
12
Ø 95
r 12
35
- 0,05
0
11
Ø 82,55
16,5
104
Ø 65
1 1 35 28
86
Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
2004 4,65 280 4060 240 3480 3500 6,97 16,2 0,91 8,70 2,7
2006 6,45 280 4060 240 3480 3500 9,67 22,5 1,26 12,07 2,7
2008 8,25 280 4060 240 3480 3500 12,37 28,8 1,62 15,43 2,8
2010 10,12 280 4060 240 3480 3500 15,18 35,3 1,98 18,93 2,8
2012 12 280 4060 240 3480 3500 18 42 2,35 22,45 2,8
2014 13,8 250 3625 210 3045 3500 20,7 48,3 2,71 25,81 3
2015 15,52 250 3625 210 3045 3500 23,25 52,5 3,04 29,03 3,1
2017 17,3 220 3190 190 2755 3500 25,95 60,55 3,39 32,36 3,2
2018 19,12 200 2900 170 2465 3500 28,65 66,8 3,75 35,77 3,3
2022 22,87 175 2537 150 2175 3500 34,2 79,8 4,30 42,78 3,4
2026 27,6 175 2537 150 2175 3000 41,4 82,8 5,16 51,63 3,8
2030 31,2 175 2537 150 2175 3000 46,8 93,6 5,77 58,36 3,9
F.T 20 1341 1/4
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
PSI
bar
P
H D
2004
to 20 17,4 38 M6 12 15 17,4 38 M6 15
1 / 2 " BSP
N: 2.500055
3 / 8 " BSP
N: 2.500054
(HPI)
E 2012 V: 2.504126 V: 2.505994
20 40 M6 12 15 35 M6 12
2014 3 / 4 " BSP 1 / 2 " BSP
ØC
to
ØF 2030 N: 367141.503 N: 367141.703
effective depth G
23,5 40 M8 13 15 30 M6 13
4 holes Ø F 2030 3 / 4 " BSP 1 / 2 " BSP
N: X.367508.102 N: X.367508.202
effective depth G
F 2004
to
3/4"
16
3/8"
12
(Threaded) BSP BSP
2012
ØF 2014
effective depth G to 1" 1/2"
18 14
2022 BSP BSP
2004 1"1/16
U
7/8"
12 14
to UNF
20 17
UNF
(Threaded 2012 2B 2B
SAE J 475)
2014 1"5/16 7/8"
to 12 14
20 17
UNF UNF
2022 2B 2B
ØF 1"5/16 1"1/16
effective depth G 2026-2030 12
20 12
20
UNF UNF
2B 2B
2004
Y D to
2012
20 17,4 38 M8 14 15 17,4 38 M8 14
(ISO 6162)
2014
to 26 47,6 22,4 M10 14 15 17,4 38 M8 14
2022
E
ØC
ØF
effective depth G 2026-2030 26 52,4 26,2 M10 14 15 17,4 38 M8 14
F.T 20 1341 2/4
X 2004
(without ports)
to Only with rear body Type A
2030
Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
Dimensions readings and approximative characteristics subject to modifications.
internal return
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 20 1341 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
10 20
C03 C03
Taper 1/5
72 F 69 F
46 56
F2 F1
M14 x 150
2,5 20
11 - 0,1
0
0
4 - 0,03 0
4 - 0,03
- 0,006
- 0,017
17,5 - 0,1
0
F3 F3
Ø20
Ø16
25
15,5 19,5
40
Ø 19,4
50 N.m 50 N.m
F.T 20 1341 4/4
130,3
A 106,3
B
14 12 Ø 95
2 holes
Ø11
35
- 0,036
- 0,071
Ø 85
16,5
104
Ø 75
1 1 54 25
86
Direction 1 Direction 2
Dimensions
Dimensions readings and approximative characteristics subject to modifications.
2004 4,65 280 4060 240 3480 3500 6,97 16,2 0,91 8,70 2,7
2006 6,45 280 4060 240 3480 3500 9,67 22,5 1,26 12,07 2,7
2008 8,25 280 4060 240 3480 3500 12,37 28,8 1,62 15,43 2,8
2010 10,12 280 4060 240 3480 3500 15,18 35,3 1,98 18,93 2,8
2012 12 280 4060 240 3480 3500 18 42 2,35 22,45 2,8
2014 13,8 250 3625 210 3045 3500 20,7 48,3 2,71 25,81 3
2015 15,52 250 3625 210 3045 3500 23,25 52,5 3,04 29,03 3,1
2017 17,3 220 3190 190 2755 3500 25,95 60,55 3,39 32,36 3,2
2018 19,12 200 2900 170 2465 3500 28,65 66,8 3,75 35,77 3,3
2022 22,87 175 2537 150 2175 3500 34,2 79,8 4,30 42,78 3,4
2026 27,6 175 2537 150 2175 3000 41,4 82,8 5,16 51,63 3,8
2030 31,2 175 2537 150 2175 3000 46,8 93,6 5,77 58,36 3,9
F.T 20 1343 1/4
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
PSI
bar
P
H D
2004
to 20 17,4 38 M6 12 15 17,4 38 M6 15
1 / 2 " BSP
N: 2.500055
3 / 8 " BSP
N: 2.500054
(HPI)
E 2012 V: 2.504126 V: 2.505994
20 40 M6 12 15 35 M6 12
2014 3 / 4 " BSP 1 / 2 " BSP
ØC
to
ØF 2030 N: 367141.503 N: 367141.703
effective depth G
23,5 40 M8 13 15 30 M6 13
4 holes Ø F 2030 3 / 4 " BSP 1 / 2 " BSP
N: X.367508.102 N: X.367508.202
effective depth G
F 2004
to
3/4"
16
3/8"
12
(Threaded) BSP BSP
2012
ØF 2014
effective depth G to 1" 1/2"
18 14
2022 BSP BSP
2004 1"1/16
U
7/8"
12 14
to UNF
20 17
UNF
(Threaded 2012 2B 2B
SAE J 475)
2014 1"5/16 7/8"
to 12 14
20 17
UNF UNF
2022 2B 2B
ØF 1"5/16 1"1/16
effective depth G 2026-2030 12
20 12
20
UNF UNF
2B 2B
2004
Y D to
2012
20 17,4 38 M8 14 15 17,4 38 M8 14
(ISO 6162)
2014
to 26 47,6 22,4 M10 14 15 17,4 38 M8 14
2022
E
ØC
ØF
effective depth G 2026-2030 26 52,4 26,2 M10 14 15 17,4 38 M8 14
F.T 20 1343 2/4
X 2004
(without ports)
to Only with rear body Type A
2030
Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
internal return
Dimensions readings and approximative characteristics subject to modifications.
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 20 1343 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
Tapered
10
C05
Cône 1/5
100 F
1,5 54
36,5
F1
13,67 - 0,1
M18 x 250
0
-0
5 - 0,03
F2
12,5
19 25
70 N.m
F.T 20 1343 4/4
Ø 85,9
130,3
A 106,3
B
14 12 Ø 95
2 holes
Ø11
35
- 0,036
- 0,071
Ø 85
16,5
104
Ø 75
1 1 54 25
86
Direction 1 Direction 2
Dimensions
Dimensions readings and approximative characteristics subject to modifications.
2004 4,65 280 4060 240 3480 3500 6,97 16,2 0,91 8,70 2,7
2006 6,45 280 4060 240 3480 3500 9,67 22,5 1,26 12,07 2,7
2008 8,25 280 4060 240 3480 3500 12,37 28,8 1,62 15,43 2,8
2010 10,12 280 4060 240 3480 3500 15,18 35,3 1,98 18,93 2,8
2012 12 280 4060 240 3480 3500 18 42 2,35 22,45 2,8
2014 13,8 250 3625 210 3045 3500 20,7 48,3 2,71 25,81 3
2015 15,52 250 3625 210 3045 3500 23,25 52,5 3,04 29,03 3,1
2017 17,3 220 3190 190 2755 3500 25,95 60,55 3,39 32,36 3,2
2018 19,12 200 2900 170 2465 3500 28,65 66,8 3,75 35,77 3,3
2022 22,87 175 2537 150 2175 3500 34,2 79,8 4,30 42,78 3,4
2026 27,6 175 2537 150 2175 3000 41,4 82,8 5,16 51,63 3,8
2030 31,2 175 2537 150 2175 3000 46,8 93,6 5,77 58,36 3,9
F.T 20 1344 1/4
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
PSI
bar
P
H D
2004
to 20 17,4 38 M6 12 15 17,4 38 M6 15
1 / 2 " BSP
N: 2.500055
3 / 8 " BSP
N: 2.500054
(HPI)
E 2012 V: 2.504126 V: 2.505994
20 40 M6 12 15 35 M6 12
2014 3 / 4 " BSP 1 / 2 " BSP
ØC
to
ØF 2030 N: 367141.503 N: 367141.703
effective depth G
23,5 40 M8 13 15 30 M6 13
4 holes Ø F 2030 3 / 4 " BSP 1 / 2 " BSP
N: X.367508.102 N: X.367508.202
effective depth G
F 2004
to
3/4"
16
3/8"
12
(Threaded) BSP BSP
2012
ØF 2014
effective depth G to 1" 1/2"
18 14
2022 BSP BSP
2004 1"1/16
U
7/8"
12 14
to UNF
20 17
UNF
(Threaded 2012 2B 2B
SAE J 475)
2014 1"5/16 7/8"
to 12 14
20 17
UNF UNF
2022 2B 2B
ØF 1"5/16 1"1/16
effective depth G 2026-2030 12
20 12
20
UNF UNF
2B 2B
2004
Y D to
2012
20 17,4 38 M8 14 15 17,4 38 M8 14
(ISO 6162)
2014
to 26 47,6 22,4 M10 14 15 17,4 38 M8 14
2022
E
ØC
ØF
effective depth G 2026-2030 26 52,4 26,2 M10 14 15 17,4 38 M8 14
F.T 20 1344 2/4
X 2004
(without ports)
to Only with rear body Type A
2030
Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
internal return
Dimensions readings and approximative characteristics subject to modifications.
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 20 1344 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
Tapered
10
C05
Cône 1/5
100 F
1,5 54
36,5
F1
13,67 - 0,1
M18 x 250
0
-0
5 - 0,03
F2
12,5
19 25
70 N.m
F.T 20 1344 4/4
A 88
B 36 36
8 12 r 45
4 holes Ø 9
42,5
34,5
35
- 0,030
- 0,060
116
Ø 80
16,5
104
1 1 r8
86
Direction 1 Direction 2
Seal kits:
004 - 006 - 008
123,5 74,5 Nitrile: K5073298 + K5069830
010 - 012
014 - 015 - 017 Viton: K5073299 + K5069840
138 82
018 - 022 (For the manufacturings
026 - 030 154 90 from may 1986)
2004 4,65 280 4060 240 3480 3500 6,97 16,2 0,91 8,70 2,7
2006 6,45 280 4060 240 3480 3500 9,67 22,5 1,26 12,07 2,7
2008 8,25 280 4060 240 3480 3500 12,37 28,8 1,62 15,43 2,8
2010 10,12 280 4060 240 3480 3500 15,18 35,3 1,98 18,93 2,8
2012 12 280 4060 240 3480 3500 18 42 2,35 22,45 2,8
2014 13,8 250 3625 210 3045 3500 20,7 48,3 2,71 25,81 3
2015 15,52 250 3625 210 3045 3500 23,25 52,5 3,04 29,03 3,1
2017 17,3 220 3190 190 2755 3500 25,95 60,55 3,39 32,36 3,2
2018 19,12 200 2900 170 2465 3500 28,65 66,8 3,75 35,77 3,3
2022 22,87 175 2537 150 2175 3500 34,2 79,8 4,30 42,78 3,4
2026 27,6 175 2537 150 2175 3000 41,4 82,8 5,16 51,63 3,8
2030 31,2 175 2537 150 2175 3000 46,8 93,6 5,77 58,36 3,9
F.T 20 1347 1/4
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
PSI
bar
P
H D
2004
to 20 17,4 38 M6 12 15 17,4 38 M6 15
1 / 2 " BSP
N: 2.500055
3 / 8 " BSP
N: 2.500054
(HPI)
E 2012 V: 2.504126 V: 2.505994
20 40 M6 12 15 35 M6 12
2014 3 / 4 " BSP 1 / 2 " BSP
ØC
to
ØF 2030 N: 367141.503 N: 367141.703
effective depth G
23,5 40 M8 13 15 30 M6 13
4 holes Ø F 2030 3 / 4 " BSP 1 / 2 " BSP
N: X.367508.102 N: X.367508.202
effective depth G
F 2004
to
3/4"
16
3/8"
12
(Threaded) BSP BSP
2012
ØF 2014
effective depth G to 1" 1/2"
18 14
2022 BSP BSP
2004 1"1/16
U
7/8"
12 14
to UNF
20 17
UNF
(Threaded 2012 2B 2B
SAE J 475)
2014 1"5/16 7/8"
to 12 14
20 17
UNF UNF
2022 2B 2B
ØF 1"5/16 1"1/16
effective depth G 2026-2030 12
20 12
20
UNF UNF
2B 2B
2004
Y D to
2012
20 17,4 38 M8 14 15 17,4 38 M8 14
(ISO 6162)
2014
to 26 47,6 22,4 M10 14 15 17,4 38 M8 14
2022
E
ØC
ØF
effective depth G 2026-2030 26 52,4 26,2 M10 14 15 17,4 38 M8 14
F.T 20 1347 2/4
X 2004
(without ports)
to Only with rear body Type A
2030
Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
Dimensions readings and approximative characteristics subject to modifications.
internal return
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
F.T 20 1347 3/4
100
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
10 20
45 F 42 F
19 29
F1
F2
M14 x 150
2,5 20
11 - 0,1
0
0
0
4 - 0,03 4 - 0,03
- 0,006
Ø16 - 0,017
17,5 - 0,1
F3
0
F3
Ø20
25
15,5 19,5
Dimensions readings and approximative characteristics subject to modifications.
50 N.m 50 N.m
F.T 20 1347 4/4
Ø 80,92
A 88
B 36 36
8 12 r 45
4 holes Ø 9
42,5
34,5
35
- 0,030
- 0,060
116
Ø 80
16,5
104
1 1 r8
86
Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
2004 4,65 280 4060 240 3480 3500 6,97 16,2 0,91 8,70 2,7
2006 6,45 280 4060 240 3480 3500 9,67 22,5 1,26 12,07 2,7
2008 8,25 280 4060 240 3480 3500 12,37 28,8 1,62 15,43 2,8
2010 10,12 280 4060 240 3480 3500 15,18 35,3 1,98 18,93 2,8
2012 12 280 4060 240 3480 3500 18 42 2,35 22,45 2,8
2014 13,8 250 3625 210 3045 3500 20,7 48,3 2,71 25,81 3
2015 15,52 250 3625 210 3045 3500 23,25 52,5 3,04 29,03 3,1
2017 17,3 220 3190 190 2755 3500 25,95 60,55 3,39 32,36 3,2
2018 19,12 200 2900 170 2465 3500 28,65 66,8 3,75 35,77 3,3
2022 22,87 175 2537 150 2175 3500 34,2 79,8 4,30 42,78 3,4
2026 27,6 175 2537 150 2175 3000 41,4 82,8 5,16 51,63 3,8
2030 31,2 175 2537 150 2175 3000 46,8 93,6 5,77 58,36 3,9
F.T 20 1349 1/4
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
PSI
bar
P
H D
2004
to 20 17,4 38 M6 12 15 17,4 38 M6 15
1 / 2 " BSP
N: 2.500055
3 / 8 " BSP
N: 2.500054
(HPI)
E 2012 V: 2.504126 V: 2.505994
20 40 M6 12 15 35 M6 12
2014 3 / 4 " BSP 1 / 2 " BSP
ØC
to
ØF 2030 N: 367141.503 N: 367141.703
effective depth G
23,5 40 M8 13 15 30 M6 13
4 holes Ø F 2030 3 / 4 " BSP 1 / 2 " BSP
N: X.367508.102 N: X.367508.202
effective depth G
F 2004
to
3/4"
16
3/8"
12
(Threaded) BSP BSP
2012
ØF 2014
effective depth G to 1" 1/2"
18 14
2022 BSP BSP
2004 1"1/16
U
7/8"
12 14
to UNF
20 17
UNF
(Threaded 2012 2B 2B
SAE J 475)
2014 1"5/16 7/8"
to 12 14
20 17
UNF UNF
2022 2B 2B
ØF 1"5/16 1"1/16
effective depth G 2026-2030 12
20 12
20
UNF UNF
2B 2B
2004
Y D to
2012
20 17,4 38 M8 14 15 17,4 38 M8 14
(ISO 6162)
2014
to 26 47,6 22,4 M10 14 15 17,4 38 M8 14
2022
E
ØC
ØF
effective depth G 2026-2030 26 52,4 26,2 M10 14 15 17,4 38 M8 14
F.T 20 1349 2/4
X 2004
(without ports)
to Only with rear body Type A
2030
Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
internal return
Dimensions readings and approximative characteristics subject to modifications.
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 20 1349 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
10 20
45 F 42 F
19 29
F1
F2
M14 x 150
2,5 20
11 - 0,1
0
0
0
4 - 0,03 4 - 0,03
- 0,006
Ø16 - 0,017
17,5 - 0,1
F3
0
F3
Ø20
25
15,5 19,5
Dimensions readings and approximative characteristics subject to modifications.
50 N.m 50 N.m
F.T 20 1349 4/4
A C D C E
B B
35
16,5
104
A C G C E
B B
35
25,4
16,5
73
11,1
104
Flat front Port location Junction body Port location Rear body
body 2 / 1 or 2,5 / 1
A C D C E
B B
35
16,5
104
Thick front Port location Junction body Port location Rear body
body 2 / 2 - 2,5 / 2
or 2,5 / 2,5
Dimensions readings and approximative characteristics subject to modifications.
A C G C E
B B
35
25,4
16,5
73
11,1
104
Thick front Port location Junction body Port location Rear body
body 2 / 2 - 2,5 / 2
or 2,5 / 2,5
ATTENTION
Q Capacity in cc / rev Calculation of the torque for one pump body : 1,59 x Q x P
= C ( N.m )
1000 x Rm
P Pressure in bar
Example : P 1 AAK 2015 H A 2008 H L 30 A01 Pressure : 2015 200 bar Speed : 1500 RPM
Rm Mechanical efficiency 2008 150 bar
( see catalogue C10 ) 1,59 x 15 x 200
= 5,48 N.m
1000 x 0,87
1,59 x 8 x 150
= 2,19 N.m
1000 x 0,87
F.T 25 1307
F.T 25 1334
F.T 25 1367
F.T 25 1369
F.T 25 1308
Data sheet
PUMP CAN
F.T 25 1309
Data sheet
PUMP CEN
F.T 25 1310
Data sheet
PUMP CEK
F.T 25 1361
Data sheet
PUMP DBN
F.T 25 1311
Data sheet
PUMP DBK
F.T 25 1335
Data sheet
PUMP DCN
F.T 25 1312
Data sheet
PUMP DCK
F.T 25 1336
Data sheet
PUMP DUK
F.T 25 1338
Data sheet
PUMP DWN
F.T 25 1337
Data sheet
PUMP DZK
F.T 25 1363
Data sheet
MULTIPLES
F.T 20 1306 PUMPS
6 A 109
B Front body 106,3
12
SAE "A" Ø 95
r 12
35
- 0,05
0
11
22
Ø 82,55
P2 T1 T2 P1
r 12
1 1 6
86
Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
12 107 51
Nitrile: K5069810
15 - 17 - 18 -22 123 59 Viton: K5069820
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
F.T 25 1307 1/4
PSI
bar
P
H
(HPI)
2512
2514 1 " BSP 1 / 2 " BSP
2515 26 47,6 22,4 M6 12 15 17,4 38 M6 12 N: 2.500496 N: 2.500055
V: 2.504117 V: 2.504126
E
ØC 2517
2518
ØF 2522
effective depth G
D
C 2512
(Square)
2514 3 / 4 " BSP 1 / 2 " BSP
2515 20 40 M6 12 15 35 M6 12
ØC 2517 N: 367141.503 N: 367141.703
2518
ØF 2522
effective depth G
B D
2512
(Italian)
2514 1 / 2 " BSP 3 / 8 " BSP
N: X.367508.101 N: X.367508.201
ØC 2515
23,5 40 M8 13 15 30 M6 13
2517 3 / 4 " BSP 1 / 2 " BSP
2518 N: X.367508.102 N: X.367508.202
2522
4 holes Ø F
Dimensions readings and approximative characteristics subject to modifications.
effective depth G
F
(Threaded) 2512
2514
2515 1" 1/2"
2517 18 14
Gaz Gaz
ØF 2518
effective depth G 2522
U 2512
1"5/16
12
20
7/8"
14
17
(Threaded UNF UNF
SAE J 475) 2B 2B
2514
2515 1"5/16 1"1/16
ØF 2517
12
20 12
20
UNF UNF
effective depth G 2518 2B 2B
2522
Y D
2512 26 47,6 22,4 M10 14 15 17,4 38 M8 14
(ISO 6162)
2514
E
ØC 2515
ØF 2517 26 52,4 26,2 M10 14 15 17,4 38 M8 14
effective depth G 2518
F.T 25 1307 2/4
2522
X 2512
2514
(without ports)
2515
Only with rear body Type A
2517
2518
2522 Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
Dimensions readings and approximative characteristics subject to modifications.
internal return
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
F.T 25 1307 3/4
100
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
Ø15,837 - 0,051
-0
4
-0
28 12 ± 0,3
3 ± 0,3
Ø 8,02
- 0,025 - 0,03
0
- 0,025
17,5 - 0,2 2,5 20 8 - 0,061
0
Ø18
Ø18
Ø18
Ø17
Ø18
± 0,15
- 0,005
- 0,014
12 12 25 6 3 8 4
9,4
25
Ø15,875
Ø16,65 3
100 N.m
+ 0,025
31 ± 0,3
Ø 15,98
22 3
0
-0 -0
3,2 - 0,025 4 - 0,03
Ø 22,149
2,5 20 30
M 12 x 175
17,5 - 0,2
0
Ø18
Ø18
Pitch 16/32
- 0,006
- 0,017
Ø 16,65
Ø16
A08 F
C02 F
31 ± 0,3
-0
3,17 - 0,05
15 ±0,25
2,5 20
- 0,05
17,5 - 0,2
0
0
Ø18
Ø9,9
Ø18
- 0,006
- 0,017
25 6
2
Ø16
10 5
100 N.m
D01 F A17 F
23,5 35
Ø16,98 ± 0,063
±0,3 ± 0,3
- 0,011
0
Ø16,5
F.T 25 1307 4/4
Ø18
Ø18
3 32 3
17 6,5
Ø 83,63
6 A 109
B Front body 106,3
12
SAE "A" Ø 95
r 12
35
- 0,05
0
11
22
Ø 82,55
16,5
104
r 12
1 1 6
86
Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
12 107 51
Nitrile: K5069810
15 - 17 - 18 -22 123 59 Viton: K5069820
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
F.T 25 1334 1/4
PSI
bar
P
H
(HPI)
2512
2514 1 " BSP 1 / 2 " BSP
2515 26 47,6 22,4 M6 12 15 17,4 38 M6 12 N: 2.500496 N: 2.500055
V: 2.504117 V: 2.504126
E
ØC 2517
2518
ØF 2522
effective depth G
D
C 2512
(Square)
2514 3 / 4 " BSP 1 / 2 " BSP
2515 20 40 M6 12 15 35 M6 12
ØC 2517 N: 367141.503 N: 367141.703
2518
ØF 2522
effective depth G
B D
2512
(Italian)
2514 1 / 2 " BSP 3 / 8 " BSP
N: X.367508.101 N: X.367508.201
ØC 2515
23,5 40 M8 13 15 30 M6 13
2517 3 / 4 " BSP 1 / 2 " BSP
2518 N: X.367508.102 N: X.367508.202
2522
4 holes Ø F
Dimensions readings and approximative characteristics subject to modifications.
effective depth G
F
(Threaded) 2512
2514
2515 1" 1/2"
2517 18 14
Gaz Gaz
ØF 2518
effective depth G 2522
U 2512
1"5/16
12
20
7/8"
14
17
(Threaded UNF UNF
SAE J 475) 2B 2B
2514
2515 1"5/16 1"1/16
ØF 2517
12
20 12
20
UNF UNF
effective depth G 2518 2B 2B
2522
Y D
2512 26 47,6 22,4 M10 14 15 17,4 38 M8 14
(ISO 6162)
2514
E
ØC 2515
ØF 2517 26 52,4 26,2 M10 14 15 17,4 38 M8 14
effective depth G 2518
F.T 25 1334 2/4
2522
X 2512
2514
(without ports)
2515
Only with rear body Type A
2517
2518
2522 Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
internal return
Dimensions readings and approximative characteristics subject to modifications.
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 25 1334 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
Ø15,837 - 0,051
-0
4 - 0,03
-0
28 12 ± 0,3
3 ± 0,3
Ø 8,02
- 0,025
0
- 0,025
2,5 20 8 - 0,061
17,5 - 0,2
0
Ø18
Ø18
Ø18
Ø17
Ø18
± 0,15
- 0,005
Ø15,875 - 0,014
12 12 25 6 3 8 4
9,4
Ø16,65 25 3
100 N.m
+ 0,025
31 ± 0,3 Ø 15,98
22 3
0
-0 -0
3,2 - 0,025 4 - 0,03
Ø 22,149
2,5 30
20
M 12 x 175
17,5 - 0,2
0
Ø18
Ø18
Pitch 16/32
- 0,006
- 0,017
Ø 16,65
Ø16
A08 F
C02 F
31 ± 0,3
-0
3,17 - 0,05
15 ±0,25
2,5 20
- 0,05
17,5 - 0,2
0
0
Ø18
Ø9,9
Ø18
- 0,006
- 0,017
25 6
2
Ø16
10 5
100 N.m
D01 F A17 F
23,5 35
Ø16,98 ± 0,063
±0,3 ± 0,3
- 0,011
0
Ø16,5
Ø18
Ø18
F.T 25 1334 4/4
3 32 3
17 6,5
A
B Ø 146
6,35 18
Ø 120
2 holes Ø 14
r 14
35
- 0,05
16,5
104
P2 T1 T2 P1
1 1
86
Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
F.T 25 1367 1/4
PSI
bar
P
H
(HPI)
2512
2514 1 " BSP 1 / 2 " BSP
2515 26 47,6 22,4 M6 12 15 17,4 38 M6 12 N: 2.500496 N: 2.500055
V: 2.504117 V: 2.504126
E
ØC 2517
2518
ØF 2522
effective depth G
D
C 2512
(Square)
2514 3 / 4 " BSP 1 / 2 " BSP
2515 20 40 M6 12 15 35 M6 12
ØC 2517 N: 367141.503 N: 367141.703
2518
ØF 2522
effective depth G
B D
2512
(Italian)
2514 1 / 2 " BSP 3 / 8 " BSP
N: X.367508.101 N: X.367508.201
ØC 2515
23,5 40 M8 13 15 30 M6 13
2517 3 / 4 " BSP 1 / 2 " BSP
2518 N: X.367508.102 N: X.367508.202
Dimensions readings and approximative characteristics subject to modifications.
2522
4 holes Ø F
effective depth G
F
(Threaded) 2512
2514
2515 1" 1/2"
2517 18 14
Gaz Gaz
ØF 2518
effective depth G 2522
U 2512
1"5/16
12
20
7/8"
14
17
(Threaded UNF UNF
SAE J 475) 2B 2B
2514
2515 1"5/16 1"1/16
ØF 2517
12
20 12
20
UNF UNF
effective depth G 2518 2B 2B
2522
Y D
2512 26 47,6 22,4 M10 14 15 17,4 38 M8 14
(ISO 6162)
2514
E
ØC 2515
ØF 2517 26 52,4 26,2 M10 14 15 17,4 38 M8 14
effective depth G 2518
F.T 25 1367 2/4
2522
X 2512
2514
(without ports)
2515
Only with rear body Type A
2517
2518
2522 Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
internal return
Dimensions readings and approximative characteristics subject to modifications.
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 25 1367 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
Ø15,837 - 0,051
-0
4
-0
27 11 ± 0,3
3 ± 0,3
Ø 8,02
- 0,025 - 0,03
0
- 0,025
2,5 20 8 - 0,061
17,5 - 0,2
0
Ø18
Ø18
Ø18
Ø17
Ø18
± 0,15
- 0,005
- 0,014
12 11 25 5 3 8 3
9,4
25
Ø15,875
Ø16,65 2
100 N.m
+ 0,025
30 ± 0,3
Ø 15,98
22 2
0
-0 -0
3,2 - 0,025 4 - 0,03
Ø 22,149
2,5 20 30
M 12 x 175
17,5 - 0,2
0
Ø18
Ø18
Pitch 16/32
- 0,006
- 0,017
Ø 16,65
Ø16
A08 F
C02 F
30 ± 0,3
-0
3,17 - 0,05
14 ±0,25
2,5 20
- 0,05
17,5 - 0,2
0
0
Ø18
Ø9,9
Ø18
- 0,006
- 0,017
25 5
2
Ø16
10 4
100 N.m
D01 F A17 F
22,5 34
Ø16,98 ± 0,063
±0,3 ± 0,3
- 0,011
0
Ø16,5
Ø18
Ø18
F.T 25 1367 4/4
3 32 2
17 5,5
Ø 95,80
3 holes Ø 9
B 51,46 47,16
10 12 5,94 r8
r 10
r8
55,1
43,8
35
- 0,036
- 0,071
7,86
20,1
16,5
104
36,79
r8
56,72
T1 P1
r 10
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
F.T 25 1369 1/4
PSI
bar
P
H
(HPI)
2512
2514 1 " BSP 1 / 2 " BSP
2515 26 47,6 22,4 M6 12 15 17,4 38 M6 12 N: 2.500496 N: 2.500055
V: 2.504117 V: 2.504126
E
ØC 2517
2518
ØF 2522
effective depth G
D
C 2512
(Square)
2514 3 / 4 " BSP 1 / 2 " BSP
2515 20 40 M6 12 15 35 M6 12
ØC 2517 N: 367141.503 N: 367141.703
2518
ØF 2522
effective depth G
B D
2512
(Italian)
2514 1 / 2 " BSP 3 / 8 " BSP
N: X.367508.101 N: X.367508.201
ØC 2515
23,5 40 M8 13 15 30 M6 13
2517 3 / 4 " BSP 1 / 2 " BSP
2518 N: X.367508.102 N: X.367508.202
Dimensions readings and approximative characteristics subject to modifications.
2522
4 holes Ø F
effective depth G
F
(Threaded) 2512
2514
2515 1" 1/2"
2517 18 14
Gaz Gaz
ØF 2518
effective depth G 2522
U 2512
1"5/16
12
20
7/8"
14
17
(Threaded UNF UNF
SAE J 475) 2B 2B
2514
2515 1"5/16 1"1/16
ØF 2517
12
20 12
20
UNF UNF
effective depth G 2518 2B 2B
2522
Y D
2512 26 47,6 22,4 M10 14 15 17,4 38 M8 14
(ISO 6162)
2514
E
ØC 2515
ØF 2517 26 52,4 26,2 M10 14 15 17,4 38 M8 14
effective depth G 2518
F.T 20 1369 2/4
2522
X 2512
2514
(without ports)
2515
Only with rear body Type A
2517
2518
2522 Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
internal return
Dimensions readings and approximative characteristics subject to modifications.
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 25 1369 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
F
39,8 ± 0,3
27,8
7/16"-20UNF-2A
-0
3
Ø 8,02
- 0,025
Ø18
± 0,15
12 12
9,4
Ø16,65
Delivered with nut: K100841
250 N.m
Dimensions readings and approximative characteristics subject to modifications.
F.T 25 1369 4/4
4
A
86
B
12 4 holes Ø 8,3
35,7 35,7
- 0,05
40,5
0
35
32,5
Ø 36,47
112
16,5
104
63,6
P2 T1 T2 P1
12 107 51
Nitrile: K5069810
15 - 17 - 18 -22 123 59 Viton: K5069820
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
F.T 25 1308 1/4
PSI
bar
P
H
(HPI)
2512
2514 1 " BSP 1 / 2 " BSP
2515 26 47,6 22,4 M6 12 15 17,4 38 M6 12 N: 2.500496 N: 2.500055
V: 2.504117 V: 2.504126
E
ØC 2517
2518
ØF 2522
effective depth G
D
C 2512
(Square)
2514 3 / 4 " BSP 1 / 2 " BSP
2515 20 40 M6 12 15 35 M6 12
ØC 2517 N: 367141.503 N: 367141.703
2518
ØF 2522
effective depth G
B D
2512
(Italian)
2514 1 / 2 " BSP 3 / 8 " BSP
N: X.367508.101 N: X.367508.201
ØC 2515
23,5 40 M8 13 15 30 M6 13
2517 3 / 4 " BSP 1 / 2 " BSP
2518 N: X.367508.102 N: X.367508.202
2522
4 holes Ø F
Dimensions readings and approximative characteristics subject to modifications.
effective depth G
F
(Threaded) 2512
2514
2515 1" 1/2"
2517 18 14
Gaz Gaz
ØF 2518
effective depth G 2522
U 2512
1"5/16
12
20
7/8"
14
17
(Threaded UNF UNF
SAE J 475) 2B 2B
2514
2515 1"5/16 1"1/16
ØF 2517
12
20 12
20
UNF UNF
effective depth G 2518 2B 2B
2522
Y D
2512 26 47,6 22,4 M10 14 15 17,4 38 M8 14
(ISO 6162)
2514
E
ØC 2515
ØF 2517 26 52,4 26,2 M10 14 15 17,4 38 M8 14
effective depth G 2518
F.T 25 1308 2/4
2522
X 2512
2514
(without ports)
2515
Only with rear body Type A
2517
2518
2522 Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
internal return
Dimensions readings and approximative characteristics subject to modifications.
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 25 1308 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
Ø15,837 - 0,051
-0
4 - 0,03
-0
28 12 ± 0,3
3 ± 0,3
Ø 8,02
- 0,025
0
- 0,025
17,5 - 0,2 2,5 20 8 - 0,061
0
Ø18
Ø18
Ø18
Ø17
Ø18
± 0,15
- 0,005
- 0,014
12 12 25 6 3 8 4
9,4
25
Ø15,875
Ø16,65 3
100 N.m
+ 0,025
31
Ø 15,98
± 0,3
22 3
0
-0 -0
3,2 - 0,025 4 - 0,03
Ø 22,149
2,5 20 30
M 12 x 175
17,5 - 0,2
0
Ø18
Ø18
Pitch 16/32
- 0,006
- 0,017
Ø 16,65
Ø16
A08 F
C02 F
31 ± 0,3
-0
3,17 - 0,05
15 ±0,25
2,5 20
- 0,05
17,5 - 0,2
0
0
Ø18
Ø9,9
Ø18
- 0,006
- 0,017
25 6
2
Ø16
10 5
100 N.m
D01 F A17 F
23,5 35
Ø16,98 ± 0,063
±0,3 ± 0,3
- 0,011
0
Ø16,5
Ø18
Ø18
F.T 25 1308 4/4
3 32 3
17 6,5
A
86
B
3,2 12 2 holes Ø 11
r 58
r 10,5
- 0,076
- 0,03
35
19 11
108
Ø 63,5
P2 T1 T2 P1
r 38
1 1
86
Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
12 107 51
Nitrile: K5069810
15 - 17 - 18 -22 123 59 Viton: K5069820
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
F.T 25 1309 1/4
PSI
bar
P
H
(HPI)
2512
2514 1 " BSP 1 / 2 " BSP
2515 26 47,6 22,4 M6 12 15 17,4 38 M6 12 N: 2.500496 N: 2.500055
V: 2.504117 V: 2.504126
E
ØC 2517
2518
ØF 2522
effective depth G
D
C 2512
(Square)
2514 3 / 4 " BSP 1 / 2 " BSP
2515 20 40 M6 12 15 35 M6 12
ØC 2517 N: 367141.503 N: 367141.703
2518
ØF 2522
effective depth G
B D
2512
(Italian)
2514 1 / 2 " BSP 3 / 8 " BSP
N: X.367508.101 N: X.367508.201
ØC 2515
23,5 40 M8 13 15 30 M6 13
2517 3 / 4 " BSP 1 / 2 " BSP
2518 N: X.367508.102 N: X.367508.202
2522
4 holes Ø F
Dimensions readings and approximative characteristics subject to modifications.
effective depth G
F
(Threaded) 2512
2514
2515 1" 1/2"
2517 18 14
Gaz Gaz
ØF 2518
effective depth G 2522
U 2512
1"5/16
12
20
7/8"
14
17
(Threaded UNF UNF
SAE J 475) 2B 2B
2514
2515 1"5/16 1"1/16
ØF 2517
12
20 12
20
UNF UNF
effective depth G 2518 2B 2B
2522
Y D
2512 26 47,6 22,4 M10 14 15 17,4 38 M8 14
(ISO 6162)
2514
E
ØC 2515
ØF 2517 26 52,4 26,2 M10 14 15 17,4 38 M8 14
effective depth G 2518
F.T 25 1309 2/4
2522
X 2512
2514
(without ports)
2515
Only with rear body Type A
2517
2518
2522 Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
internal return
Dimensions readings and approximative characteristics subject to modifications.
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 25 1309 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
Ø15,837 - 0,051
-0
4 - 0,03
-0
28 12 ± 0,3
3 ± 0,3
Ø 8,02
- 0,025
0
- 0,025
17,5 - 0,2 2,5 20 8 - 0,061
0
Ø18
Ø18
Ø18
Ø17
Ø18
± 0,15
- 0,005
Ø15,875 - 0,014
12 12 25 6 3 8 4
9,4
Ø16,65 25 3
100 N.m
+ 0,025
31 ± 0,3 Ø 15,98
22 3
0
-0 -0
3,2 - 0,025 4 - 0,03
Ø 22,149
2,5 20 30
M 12 x 175
17,5 - 0,2
0
Ø18
Ø18
Pitch 16/32
- 0,006
- 0,017
Ø 16,65
Ø16
A08 F
C02 F
31 ± 0,3
-0
3,17 - 0,05
15 ±0,25
2,5 20
- 0,05
17,5 - 0,2
0
0
Ø18
Ø9,9
Ø18
- 0,006
- 0,017
25 6
2
Ø16
10 5
100 N.m
D01 F A17 F
23,5 35
Ø16,98 ± 0,063
±0,3 ± 0,3
- 0,011
0
Ø16,5
Ø18
Ø18
F.T 25 1309 3/4
3 32 3
17 6,5
A
B 42 44,5
4 6 8
37,5
9
- 0,025
- 0,050
35
21,5
Direction 1
Ø 50f7
53,5
P2 T1 T2 P1
Direction 2
9
1 1 37,5
86 44,5 42
Dimensions readings and approximative characteristics subject to modifications.
12 108 52
Nitrile: K5069810
15 - 17 - 18 -22 124 60 Viton: K5069820
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
F.T 25 1310 1/4
PSI
bar
P
H
(HPI)
2512
2514 1 " BSP 1 / 2 " BSP
2515 26 47,6 22,4 M6 12 15 17,4 38 M6 12 N: 2.500496 N: 2.500055
V: 2.504117 V: 2.504126
E
ØC 2517
2518
ØF 2522
effective depth G
D
C 2512
(Square)
2514 3 / 4 " BSP 1 / 2 " BSP
2515 20 40 M6 12 15 35 M6 12
ØC 2517 N: 367141.503 N: 367141.703
2518
ØF 2522
effective depth G
B D
2512
(Italian)
2514 1 / 2 " BSP 3 / 8 " BSP
N: X.367508.101 N: X.367508.201
ØC 2515
23,5 40 M8 13 15 30 M6 13
2517 3 / 4 " BSP 1 / 2 " BSP
2518 N: X.367508.102 N: X.367508.202
2522
4 holes Ø F
Dimensions readings and approximative characteristics subject to modifications.
effective depth G
F
(Threaded) 2512
2514
2515 1" 1/2"
2517 18 14
Gaz Gaz
ØF 2518
effective depth G 2522
U 2512
1"5/16
12
20
7/8"
14
17
(Threaded UNF UNF
SAE J 475) 2B 2B
2514
2515 1"5/16 1"1/16
ØF 2517
12
20 12
20
UNF UNF
effective depth G 2518 2B 2B
2522
Y D
2512 26 47,6 22,4 M10 14 15 17,4 38 M8 14
(ISO 6162)
2514
E
ØC 2515
ØF 2517 26 52,4 26,2 M10 14 15 17,4 38 M8 14
effective depth G 2518
F.T 25 1310 2/4
2522
X 2512
2514
(without ports)
2515
Only with rear body Type A
2517
2518
2522 Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
internal return
Dimensions readings and approximative characteristics subject to modifications.
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 25 1310 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
Ø15,837 - 0,051
-0
4
-0
26 10 ± 0,3
3 ± 0,3
Ø 8,02
- 0,025 - 0,03
0
- 0,025
2,5 20 8 - 0,061
17,5 - 0,2
0
Ø18
Ø18
Ø18
Ø17
Ø18
± 0,15
- 0,005
- 0,014
12 10 25 4 3 8 2
9,4
25
Ø15,875
Ø16,65 1
100 N.m
+ 0,025
29 ± 0,3 Ø 15,98
22 3
0
-0 -0
3,2 - 0,025 4 - 0,03
Ø 22,149
2,5 20 30
M 12 x 175
17,5 - 0,2
0
Ø18
Ø18
Pitch 16/32
- 0,006
- 0,017
Ø 16,65
Ø16
A08 F
C02 F
29 ± 0,3
-0
3,17 - 0,05
13 ±0,25
2,5 20
- 0,05
17,5 - 0,2
0
0
Ø18
Ø9,9
Ø18
- 0,006
- 0,017
25 4
2
Ø16
10 3
100 N.m
D01 F A17 F
21,5 33
Ø16,98 ± 0,063
±0,3 ± 0,3
- 0,011
0
Ø16,5
Ø18
Ø18
F.T 25 1310 3/4
3 32 1
17 4,5
A
Ø 50,80
B 42 44,5
4 6 8
37,5
9
- 0,025
- 0,050
35
21,5
Direction 1
Ø 50f7
53,5
P2 T1 T2 P1
Direction 2
9
1 1 37,5
86 44,5 42
Dimensions readings and approximative characteristics subject to modifications.
12 108 52
Nitrile: K5069810 + K102238
15 - 17 - 18 -22 124 60 Viton: K5069820
January 1984)
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
F.T 25 1361 1/4
PSI
bar
P
H
(HPI)
2512
2514 1 " BSP 1 / 2 " BSP
2515 26 47,6 22,4 M6 12 15 17,4 38 M6 12 N: 2.500496 N: 2.500055
V: 2.504117 V: 2.504126
E
ØC 2517
2518
ØF 2522
effective depth G
D
C 2512
(Square)
2514 3 / 4 " BSP 1 / 2 " BSP
2515 20 40 M6 12 15 35 M6 12
ØC 2517 N: 367141.503 N: 367141.703
2518
ØF 2522
effective depth G
B D
2512
(Italian)
2514 1 / 2 " BSP 3 / 8 " BSP
N: X.367508.101 N: X.367508.201
ØC 2515
23,5 40 M8 13 15 30 M6 13
2517 3 / 4 " BSP 1 / 2 " BSP
2518 N: X.367508.102 N: X.367508.202
2522
4 holes Ø F
Dimensions readings and approximative characteristics subject to modifications.
effective depth G
F
(Threaded) 2512
2514
2515 1" 1/2"
2517 18 14
Gaz Gaz
ØF 2518
effective depth G 2522
U 2512
1"5/16
12
20
7/8"
14
17
(Threaded UNF UNF
SAE J 475) 2B 2B
2514
2515 1"5/16 1"1/16
ØF 2517
12
20 12
20
UNF UNF
effective depth G 2518 2B 2B
2522
Y D
2512 26 47,6 22,4 M10 14 15 17,4 38 M8 14
(ISO 6162)
2514
E
ØC 2515
ØF 2517 26 52,4 26,2 M10 14 15 17,4 38 M8 14
effective depth G 2518
F.T 25 1361 2/4
2522
X 2512
2514
(without ports)
2515
Only with rear body Type A
2517
2518
2522 Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
internal return
Dimensions readings and approximative characteristics subject to modifications.
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 25 1361 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
Ø15,837 - 0,051
-0
4
-0
26 10 ± 0,3
3 ± 0,3
Ø 8,02
- 0,025 - 0,03
0
- 0,025
17,5 - 0,2 2,5 20 8 - 0,061
0
Ø18
Ø18
Ø18
Ø17
Ø18
± 0,15
- 0,005
Ø15,875 - 0,014
12 10 25 4 3 8 2
9,4
Ø16,65 25 1
100 N.m
+ 0,025
29 ± 0,3 Ø 15,98
22 1
0
-0 -0
3,2 - 0,025 4 - 0,03
Ø 22,149
2,5 20 30
M 12 x 175
17,5 - 0,2
0
Ø18
Ø18
Pitch 16/32
- 0,006
- 0,017
Ø 16,65
Ø16
A08 F
C02 F
29 ± 0,3
-0
3,17 - 0,05
13 ±0,25
2,5 20
- 0,05
17,5 - 0,2
0
0
Ø18
Ø9,9
Ø18
- 0,006
- 0,017
25 4
2
Ø16
10 3
100 N.m
D01 F A17 F
21,5 33
Ø16,98 ± 0,063
±0,3 ± 0,3
- 0,011
0
Ø16,5
Ø18
Ø18
F.T 25 1361 3/4
3 32 1
17 4,5
A 88
B 36 36
8 12 r 45
4 holes Ø 9
42,5
34,5
35
- 0,030
- 0,060
16,5
104
65,5
P2 T1 T2 P1
r8
1 1
86 1
Direction Direction 2
Dimensions readings and approximative characteristics subject to modifications.
12 107 51
Nitrile: K5069810
15 - 17 - 18 -22 123 59 Viton: K5069820
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
F.T 25 1311 1/4
PSI
bar
P
H
(HPI)
2512
2514 1 " BSP 1 / 2 " BSP
2515 26 47,6 22,4 M6 12 15 17,4 38 M6 12 N: 2.500496 N: 2.500055
V: 2.504117 V: 2.504126
E
ØC 2517
2518
ØF 2522
effective depth G
D
C 2512
(Square)
2514 3 / 4 " BSP 1 / 2 " BSP
2515 20 40 M6 12 15 35 M6 12
ØC 2517 N: 367141.503 N: 367141.703
2518
ØF 2522
effective depth G
B D
2512
(Italian)
2514 1 / 2 " BSP 3 / 8 " BSP
N: X.367508.101 N: X.367508.201
ØC 2515
23,5 40 M8 13 15 30 M6 13
2517 3 / 4 " BSP 1 / 2 " BSP
2518 N: X.367508.102 N: X.367508.202
2522
4 holes Ø F
Dimensions readings and approximative characteristics subject to modifications.
effective depth G
F
(Threaded) 2512
2514
2515 1" 1/2"
2517 18 14
Gaz Gaz
ØF 2518
effective depth G 2522
U 2512
1"5/16
12
20
7/8"
14
17
(Threaded UNF UNF
SAE J 475) 2B 2B
2514
2515 1"5/16 1"1/16
ØF 2517
12
20 12
20
UNF UNF
effective depth G 2518 2B 2B
2522
Y D
2512 26 47,6 22,4 M10 14 15 17,4 38 M8 14
(ISO 6162)
2514
E
ØC 2515
ØF 2517 26 52,4 26,2 M10 14 15 17,4 38 M8 14
effective depth G 2518
F.T 25 1311 2/4
2522
X 2512
2514
(without ports)
2515
Only with rear body Type A
2517
2518
2522 Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
Dimensions readings and approximative characteristics subject to modifications.
internal return
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
F.T 25 1311 3/4
100
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
Ø15,837 - 0,051
-0
4
-0
28 12 ± 0,3
3 ± 0,3
Ø 8,02
- 0,025 - 0,03
0
- 0,025
17,5 - 0,2 2,5 20 8 - 0,061
0
Ø18
Ø18
Ø18
Ø17
Ø18
± 0,15
- 0,005
- 0,014
12 12 25 6 3 8 4
9,4
25
Ø15,875
Ø16,65 3
100 N.m
+ 0,025
31 ± 0,3
Ø 15,98
22 3
0
-0 -0
3,2 - 0,025 4 - 0,03
Ø 22,149
2,5 20 30
M 12 x 175
17,5 - 0,2
0
Ø18
Ø18
Pitch 16/32
- 0,006
- 0,017
Ø 16,65
Ø16
A08 F
C02 F
31 ± 0,3
-0
3,17 - 0,05
15 ±0,25
2,5 20
- 0,05
17,5 - 0,2
0
0
Ø18
Ø9,9
Ø18
- 0,006
- 0,017
25 6
2
Ø16
10 5
100 N.m
D01 F A17 F
23,5 35
Ø16,98 ± 0,063
±0,3 ± 0,3
- 0,011
0
Ø16,5
Ø18
Ø18
F.T 25 1311 4/4
3 32 3
17 6,5
Ø 80,92
A 88
B 36 36
8 12 r 45
4 holes Ø 9
42,5
34,5
35
- 0,030
- 0,060
16,5
104
65,5
P2 T1 T2 P1
r8
1 1
86 1
Direction Direction 2
Dimensions readings and approximative characteristics subject to modifications.
12 105 49 94
Nitrile: K5069810
15 - 17 - 18 -22 121 57 110 Viton: K5069820
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
F.T 25 1335 1/4
PSI
bar
P
H
(HPI)
2512
2514 1 " BSP 1 / 2 " BSP
2515 26 47,6 22,4 M6 12 15 17,4 38 M6 12 N: 2.500496 N: 2.500055
V: 2.504117 V: 2.504126
E
ØC 2517
2518
ØF 2522
effective depth G
D
C 2512
(Square)
2514 3 / 4 " BSP 1 / 2 " BSP
2515 20 40 M6 12 15 35 M6 12
ØC 2517 N: 367141.503 N: 367141.703
2518
ØF 2522
effective depth G
B D
2512
(Italian)
2514 1 / 2 " BSP 3 / 8 " BSP
N: X.367508.101 N: X.367508.201
ØC 2515
23,5 40 M8 13 15 30 M6 13
2517 3 / 4 " BSP 1 / 2 " BSP
2518 N: X.367508.102 N: X.367508.202
2522
4 holes Ø F
Dimensions readings and approximative characteristics subject to modifications.
effective depth G
F
(Threaded) 2512
2514
2515 1" 1/2"
2517 18 14
Gaz Gaz
ØF 2518
effective depth G 2522
U 2512
1"5/16
12
20
7/8"
14
17
(Threaded UNF UNF
SAE J 475) 2B 2B
2514
2515 1"5/16 1"1/16
ØF 2517
12
20 12
20
UNF UNF
effective depth G 2518 2B 2B
2522
Y D
2512 26 47,6 22,4 M10 14 15 17,4 38 M8 14
(ISO 6162)
2514
E
ØC 2515
ØF 2517 26 52,4 26,2 M10 14 15 17,4 38 M8 14
effective depth G 2518
F.T 25 1335 2/4
2522
X 2512
2514
(without ports)
2515
Only with rear body Type A
2517
2518
2522 Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
internal return
Dimensions readings and approximative characteristics subject to modifications.
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 25 1335 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
Ø15,837 - 0,051
-0
4 - 0,03
-0
28 12 ± 0,3
3 ± 0,3
Ø 8,02
- 0,025
0
- 0,025
17,5 - 0,2 2,5 20 8 - 0,061
0
Ø18
Ø18
Ø18
Ø17
Ø18
± 0,15
- 0,005
- 0,014
12 12 25 6 3 8 4
9,4
25
Ø15,875
Ø16,65 3
100 N.m
+ 0,025
31 ± 0,3 Ø 15,98
22 3
0
-0 -0
3,2 - 0,025 4 - 0,03
Ø 22,149
2,5 30
20
M 12 x 175
17,5 - 0,2
0
Ø18
Ø18
Pitch 16/32
- 0,006
- 0,017
Ø 16,65
Ø16
A08 F
C02 F
31 ± 0,3
-0
3,17 - 0,05
15 ±0,25
2,5 20
- 0,05
17,5 - 0,2
0
0
Ø18
Ø9,9
Ø18
- 0,006
- 0,017
25 6
2
Ø16
10 5
100 N.m
D01 F A17 F
23,5 35
Ø16,98 ± 0,063
±0,3 ± 0,3
- 0,011
0
Ø16,5
F.T 25 1335 4/4
Ø18
Ø18
3 32 3
17 6,5
Tightening torque A
50 ± 0,2 N.m B
6 60
2 holes Ø 11,5
35
- 0,025
- 0,050
35
14,5
16,5
104
60
Ø20,4
104
P2 T1 T2 P1
1 1
86 1 2
C Direction Direction
Dimensions readings and approximative characteristics subject to modifications.
12 105 49 94
Nitrile: K5069890
15 - 17 - 18 -22 121 57 110 Viton: K5069820
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
F.T 25 1312 1/4
PSI
bar
P
H
(HPI)
2512
2514 1 " BSP 1 / 2 " BSP
2515 26 47,6 22,4 M6 12 15 17,4 38 M6 12 N: 2.500496 N: 2.500055
V: 2.504117 V: 2.504126
E
ØC 2517
2518
ØF 2522
effective depth G
D
C 2512
(Square)
2514 3 / 4 " BSP 1 / 2 " BSP
2515 20 40 M6 12 15 35 M6 12
ØC 2517 N: 367141.503 N: 367141.703
2518
ØF 2522
effective depth G
B D
2512
(Italian)
2514 1 / 2 " BSP 3 / 8 " BSP
N: X.367508.101 N: X.367508.201
ØC 2515
23,5 40 M8 13 15 30 M6 13
2517 3 / 4 " BSP 1 / 2 " BSP
2518 N: X.367508.102 N: X.367508.202
2522
4 holes Ø F
Dimensions readings and approximative characteristics subject to modifications.
effective depth G
F
(Threaded) 2512
2514
2515 1" 1/2"
2517 18 14
Gaz Gaz
ØF 2518
effective depth G 2522
U 2512
1"5/16
12
20
7/8"
14
17
(Threaded UNF UNF
SAE J 475) 2B 2B
2514
2515 1"5/16 1"1/16
ØF 2517
12
20 12
20
UNF UNF
effective depth G 2518 2B 2B
2522
Y D
2512 26 47,6 22,4 M10 14 15 17,4 38 M8 14
(ISO 6162)
2514
E
ØC 2515
ØF 2517 26 52,4 26,2 M10 14 15 17,4 38 M8 14
effective depth G 2518
F.T 25 1312 2/4
2522
X 2512
2514
(without ports)
2515
Only with rear body Type A
2517
2518
2522 Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
internal return
Dimensions readings and approximative characteristics subject to modifications.
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 25 1312 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
Ø15,837 - 0,051
-0
4 - 0,03
-0
30 14 ± 0,3
3 ± 0,3
Ø 8,02
- 0,025
0
- 0,025
2,5 20 8 - 0,061
17,5 - 0,2
0
Ø18
Ø18
Ø18
Ø17
Ø18
± 0,15
- 0,005
- 0,014
12 14 25 8 3 8 6
9,4
25
Ø15,875
Ø16,65 5
100 N.m
+ 0,025
33
Ø 15,98
± 0,3
22 5
0
-0 -0
3,2 - 0,025 4 - 0,03
Ø 22,149
2,5 30
20
M 12 x 175
17,5 - 0,2
0
Ø18
Ø18
Pitch 16/32
- 0,006
- 0,017
Ø 16,65
Ø16
A08 F
C02 F
33 ± 0,3
-0
3,17 - 0,05
17 ±0,25
2,5 20
- 0,05
17,5 - 0,2
0
0
Ø18
Ø9,9
Ø18
- 0,006
- 0,017
25 8
2
Ø16
10 7
100 N.m
D01 F A17 F
25,5 37
Ø16,98 ± 0,063
±0,3 ± 0,3
- 0,011
0
Ø16,5
F.T 25 1312 4/4
Ø18
Ø18
3 32 5
17 8,5
- 0,025
- 0,050
35
14,5
16,5
104
60
Ø20,4
104
P2 T1 T2 P1
1 1
86 1 2
C Direction Direction
Dimensions readings and approximative characteristics subject to modifications.
12 105 49 94
Nitrile: K5069890 + K101513
15 - 17 - 18 -22 121 57 110 Viton: K5069820 + K101326
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
F.T 25 1336 1/4
PSI
bar
P
H
(HPI)
2512
2514 1 " BSP 1 / 2 " BSP
2515 26 47,6 22,4 M6 12 15 17,4 38 M6 12 N: 2.500496 N: 2.500055
V: 2.504117 V: 2.504126
E
ØC 2517
2518
ØF 2522
effective depth G
D
C 2512
(Square)
2514 3 / 4 " BSP 1 / 2 " BSP
2515 20 40 M6 12 15 35 M6 12
ØC 2517 N: 367141.503 N: 367141.703
2518
ØF 2522
effective depth G
B D
2512
(Italian)
2514 1 / 2 " BSP 3 / 8 " BSP
N: X.367508.101 N: X.367508.201
ØC 2515
23,5 40 M8 13 15 30 M6 13
2517 3 / 4 " BSP 1 / 2 " BSP
2518 N: X.367508.102 N: X.367508.202
2522
4 holes Ø F
Dimensions readings and approximative characteristics subject to modifications.
effective depth G
F
(Threaded) 2512
2514
2515 1" 1/2"
2517 18 14
Gaz Gaz
ØF 2518
effective depth G 2522
U 2512
1"5/16
12
20
7/8"
14
17
(Threaded UNF UNF
SAE J 475) 2B 2B
2514
2515 1"5/16 1"1/16
ØF 2517
12
20 12
20
UNF UNF
effective depth G 2518 2B 2B
2522
Y D
2512 26 47,6 22,4 M10 14 15 17,4 38 M8 14
(ISO 6162)
2514
E
ØC 2515
ØF 2517 26 52,4 26,2 M10 14 15 17,4 38 M8 14
effective depth G 2518
F.T 25 1336 2/4
2522
X 2512
2514
(without ports)
2515
Only with rear body Type A
2517
2518
2522 Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
internal return
Dimensions readings and approximative characteristics subject to modifications.
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 25 1336 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
Ø15,837 - 0,051
-0
4 - 0,03
-0
30 14 ± 0,3
3 ± 0,3
Ø 8,02
- 0,025
0
- 0,025
2,5 20 8 - 0,061
17,5 - 0,2
0
Ø18
Ø18
Ø18
Ø17
Ø18
± 0,15
- 0,005
Ø15,875 - 0,014
12 14 25 8 3 8 6
9,4
Ø16,65 25 5
100 N.m
+ 0,025
33
Ø 15,98
± 0,3
22 5
0
-0 -0
3,2 - 0,025 4 - 0,03
Ø 22,149
2,5 20 30
M 12 x 175
17,5 - 0,2
0
Ø18
Ø18
Pitch 16/32
- 0,006
- 0,017
Ø 16,65
Ø16
A08 F
C02 F
33 ± 0,3
-0
3,17 - 0,05
17 ±0,25
2,5 20
- 0,05
17,5 - 0,2
0
0
Ø18
Ø9,9
Ø18
- 0,006
- 0,017
25 8
2
Ø16
10 7
100 N.m
D01 F A17 F
25,5 37
Ø16,98 ± 0,063
±0,3 ± 0,3
- 0,011
0
Ø16,5
Ø18
Ø18
F.T 25 1336 4/4
3 32 5
17 8,5
ATTENTION:
Face of the support Mounting without tightness seal
F of the fixing flange
Ø 53,04
Tightening torque A
50 ± 0,2 N.m B
6 60
2 holes Ø 11,5
35
- 0,030
- 0,060
35
14,5
Ø 52f7
16,5
60
Ø20,4
104
P2 T1 T2 P1
1 1
86 1 2
C Direction Direction
Dimensions readings and approximative characteristics subject to modifications.
12 105 49 94
Nitrile: K5069830 + K102539
15 - 17 - 18 -22 121 57 110 Viton: K5069840 + K107013
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
F.T 25 1338 1/4
PSI
bar
P
H
(HPI)
2512
2514 1 " BSP 1 / 2 " BSP
2515 26 47,6 22,4 M6 12 15 17,4 38 M6 12 N: 2.500496 N: 2.500055
V: 2.504117 V: 2.504126
E
ØC 2517
2518
ØF 2522
effective depth G
D
C 2512
(Square)
2514 3 / 4 " BSP 1 / 2 " BSP
2515 20 40 M6 12 15 35 M6 12
ØC 2517 N: 367141.503 N: 367141.703
2518
ØF 2522
effective depth G
B D
2512
(Italian)
2514 1 / 2 " BSP 3 / 8 " BSP
N: X.367508.101 N: X.367508.201
ØC 2515
23,5 40 M8 13 15 30 M6 13
2517 3 / 4 " BSP 1 / 2 " BSP
2518 N: X.367508.102 N: X.367508.202
Dimensions readings and approximative characteristics subject to modifications.
2522
4 holes Ø F
effective depth G
F
(Threaded) 2512
2514
2515 1" 1/2"
2517 18 14
Gaz Gaz
ØF 2518
effective depth G 2522
U 2512
1"5/16
12
20
7/8"
14
17
(Threaded UNF UNF
SAE J 475) 2B 2B
2514
2515 1"5/16 1"1/16
ØF 2517
12
20 12
20
UNF UNF
effective depth G 2518 2B 2B
2522
Y D
2512 26 47,6 22,4 M10 14 15 17,4 38 M8 14
(ISO 6162)
2514
E
ØC 2515
ØF 2517 26 52,4 26,2 M10 14 15 17,4 38 M8 14
effective depth G 2518
F.T 25 1338 2/4
2522
X 2512
2514
(without ports)
2515
Only with rear body Type A
2517
2518
2522 Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
internal return
Dimensions readings and approximative characteristics subject to modifications.
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 25 1338 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
D02
F
2,7 ± 0,3
- 0,025
8 - 0,061
Ø17
Ø18
6,5
70 N.m
+ 0,098
8 + 0,040 12 Ø18
Ø 28
Ø18
+ 0,098
8
Dimensions readings and approximative characteristics subject to modifications.
+ 0,040
F.T 25 1338 4/4
Tightening torque A
50 ± 0,2 N.m B
6 60
2 holes Ø 11,5
35
- 0,025
- 0,050
35
14,5
16,5
104
60
Ø20,4
104
P2 T1 T2 P1
1 1
86 1
C Direction Direction 2
Dimensions readings and approximative characteristics subject to modifications.
12 105 49 94
Nitrile: K5069890
15 - 17 - 18 -22 121 57 110 Viton: K5069820
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
F.T 25 1337 1/4
PSI
bar
P
H
(HPI)
2512
2514 1 " BSP 1 / 2 " BSP
2515 26 47,6 22,4 M6 12 15 17,4 38 M6 12 N: 2.500496 N: 2.500055
V: 2.504117 V: 2.504126
E
ØC 2517
2518
ØF 2522
effective depth G
D
C 2512
(Square)
2514 3 / 4 " BSP 1 / 2 " BSP
2515 20 40 M6 12 15 35 M6 12
ØC 2517 N: 367141.503 N: 367141.703
2518
ØF 2522
effective depth G
B D
2512
(Italian)
2514 1 / 2 " BSP 3 / 8 " BSP
N: X.367508.101 N: X.367508.201
ØC 2515
23,5 40 M8 13 15 30 M6 13
2517 3 / 4 " BSP 1 / 2 " BSP
2518 N: X.367508.102 N: X.367508.202
2522
4 holes Ø F
Dimensions readings and approximative characteristics subject to modifications.
effective depth G
F
(Threaded) 2512
2514
2515 1" 1/2"
2517 18 14
Gaz Gaz
ØF 2518
effective depth G 2522
U 2512
1"5/16
12
20
7/8"
14
17
(Threaded UNF UNF
SAE J 475) 2B 2B
2514
2515 1"5/16 1"1/16
ØF 2517
12
20 12
20
UNF UNF
effective depth G 2518 2B 2B
2522
Y D
2512 26 47,6 22,4 M10 14 15 17,4 38 M8 14
(ISO 6162)
2514
E
ØC 2515
ØF 2517 26 52,4 26,2 M10 14 15 17,4 38 M8 14
effective depth G 2518
F.T 25 1337 2/4
2522
X 2512
2514
(without ports)
2515
Only with rear body Type A
2517
2518
2522 Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
internal return
Dimensions readings and approximative characteristics subject to modifications.
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 25 1337 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
Ø15,837 - 0,051
-0
4
-0
30 14 ± 0,3
3 ± 0,3
Ø 8,02
- 0,025 - 0,03
0
- 0,025
0
17,5 - 0,2 2,5 20 8 - 0,061
Ø18
Ø18
Ø18
Ø17
Ø18
± 0,15
- 0,005
Ø15,875 - 0,014
12 14 25 8 3 8 6
9,4
Ø16,65 25 5
100 N.m
+ 0,025
33 ± 0,3 Ø 15,98
22 5
0
-0 -0
3,2 - 0,025 4 - 0,03
Ø 22,149
2,5 20 30
M 12 x 175
17,5 - 0,2
0
Ø18
Ø18
Pitch 16/32
- 0,006
- 0,017
Ø 16,65
Ø16
A08 F
C02 F
33 ± 0,3
-0
3,17 - 0,05
17 ±0,25
2,5 20
- 0,05
17,5 - 0,2
0
0
Ø18
Ø9,9
Ø18
- 0,006
- 0,017
25 8
2
Ø16
10 7
100 N.m
D01 F A17 F
25,5 37
Ø16,98 ± 0,063
±0,3 ± 0,3
- 0,011
0
Ø16,5
Ø18
Ø18
F.T 25 1337 4/4
3 32 5
17 8,5
P II
Sign DZ K 2 5 VI
Sign H L 4 0 D 02 XII
Sign
For CODIFICATION, see data sheet F.T R 0011
A
Ø 53,04
Tightening torque
C
50 ± 0,2 N.m 6
B 60
2 holes Ø 11,5
- 0,030
- 0,060
35
14,5
Ø 52f7
16,5
104
104
60
Ø20,4
P2 T1 T2 P1
1 1
86 1 2
Dimensions readings and approximative characteristics subject to modifications.
Direction Direction
12 105 49 94
Nitrile: K5069830 + K102539
15 - 17 - 18 -22 121 57 110 Viton: K5069840 + K107013
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
F.T 25 1362 1/4
PSI
bar
P
H
(HPI)
2512
2514 1 " BSP 1 / 2 " BSP
2515 26 47,6 22,4 M6 12 15 17,4 38 M6 12 N: 2.500496 N: 2.500055
V: 2.504117 V: 2.504126
E
ØC 2517
2518
ØF 2522
effective depth G
D
C 2512
(Square)
2514 3 / 4 " BSP 1 / 2 " BSP
2515 20 40 M6 12 15 35 M6 12
ØC 2517 N: 367141.503 N: 367141.703
2518
ØF 2522
effective depth G
B D
2512
(Italian)
2514 1 / 2 " BSP 3 / 8 " BSP
N: X.367508.101 N: X.367508.201
ØC 2515
23,5 40 M8 13 15 30 M6 13
2517 3 / 4 " BSP 1 / 2 " BSP
2518 N: X.367508.102 N: X.367508.202
Dimensions readings and approximative characteristics subject to modifications.
2522
4 holes Ø F
effective depth G
F
(Threaded) 2512
2514
2515 1" 1/2"
2517 18 14
Gaz Gaz
ØF 2518
effective depth G 2522
U 2512
1"5/16
12
20
7/8"
14
17
(Threaded UNF UNF
SAE J 475) 2B 2B
2514
2515 1"5/16 1"1/16
ØF 2517
12
20 12
20
UNF UNF
effective depth G 2518 2B 2B
2522
Y D
2512 26 47,6 22,4 M10 14 15 17,4 38 M8 14
(ISO 6162)
2514
E
ØC 2515
ØF 2517 26 52,4 26,2 M10 14 15 17,4 38 M8 14
effective depth G 2518
F.T 25 1362 2/4
2522
X 2512
2514
(without ports)
2515
Only with rear body Type A
2517
2518
2522 Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
Dimensions readings and approximative characteristics subject to modifications.
internal return
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 25 1362 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
D02
F
2,7 ± 0,3
- 0,025
8 - 0,061
Ø17
Ø18
6,5
70 N.m
+ 0,098
8 + 0,040 12 Ø18
Ø 28
Ø18
+ 0,098
8
Dimensions readings and approximative characteristics subject to modifications.
+ 0,040
F.T 25 1362 4/4
F.T 251340
F.T 25 1342
F.T 25 1344
F.T 25 1346
F.T 25 1348
F.T 25 1350
Fiche MULTIPLES
Technique
PUMPS
F.T 20 1306
6 109
A
B 106,3
12
Ø 95
r 12
35
- 0,05
0
16,5
104
Ø 65
P2 T1 T2 P1
r 12
1 1 35 28
86
Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
12 115 59
Nitrile: K5069870 + K5069830
15 - 17 - 18 -22 131 67 Viton: K5069880 + K5069840
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
F.T 25 1340 1/4
PSI
bar
P
H
(HPI)
2512
2514 1 " BSP 1 / 2 " BSP
2515 26 47,6 22,4 M6 12 15 17,4 38 M6 12 N: 2.500496 N: 2.500055
V: 2.504117 V: 2.504126
E
ØC 2517
2518
ØF 2522
effective depth G
D
C 2512
(Square)
2514 3 / 4 " BSP 1 / 2 " BSP
2515 20 40 M6 12 15 35 M6 12
ØC 2517 N: 367141.503 N: 367141.703
2518
ØF 2522
effective depth G
B D
2512
(Italian)
2514 1 / 2 " BSP 3 / 8 " BSP
N: X.367508.101 N: X.367508.201
ØC 2515
23,5 40 M8 13 15 30 M6 13
2517 3 / 4 " BSP 1 / 2 " BSP
2518 N: X.367508.102 N: X.367508.202
Dimensions readings and approximative characteristics subject to modifications.
2522
4 holes Ø F
effective depth G
F
(Threaded) 2512
2514
2515 1" 1/2"
2517 18 14
Gaz Gaz
ØF 2518
effective depth G 2522
U 2512
1"5/16
12
20
7/8"
14
17
(Threaded UNF UNF
SAE J 475) 2B 2B
2514
2515 1"5/16 1"1/16
ØF 2517
12
20 12
20
UNF UNF
effective depth G 2518 2B 2B
2522
Y D
2512 26 47,6 22,4 M10 14 15 17,4 38 M8 14
(ISO 6162)
2514
E
ØC 2515
ØF 2517 26 52,4 26,2 M10 14 15 17,4 38 M8 14
effective depth G 2518
F.T 25 1340 2/4
2522
X 2512
2514
(without ports)
2515
Only with rear body Type A
2517
2518
2522 Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
internal return
Dimensions readings and approximative characteristics subject to modifications.
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 25 1340 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
10 20
C03 C03
Taper 1/5
72 F 69 F
46 56
F2 F1
M14 x 150
2,5 20
11 - 0,1
0
0
4 - 0,03 0
4 - 0,03
- 0,006
- 0,017
17,5 - 0,1
0
F3 F3
Ø20
Ø16
25
15,5 19,5
40
Ø 19,4
50 N.m 50 N.m
F.T 25 1340 4/4
Ø 83,63
of the front body SAE "A"
6 109
A
B 106,3
12
Ø 95
r 12
35
- 0,05
0
11
Ø 82,55
16,5
Ø 65
P2 T1 T2 P1
r 12
1 1 35 28
86
Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
12 115 59
Nitrile: K5069870 + K5069830 + K102901
15 - 17 - 18 -22 131 67 Viton: K5069880 + K5069840 + K104093
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
F.T 25 1341 1/4
PSI
bar
P
H
(HPI)
2512
2514 1 " BSP 1 / 2 " BSP
2515 26 47,6 22,4 M6 12 15 17,4 38 M6 12 N: 2.500496 N: 2.500055
V: 2.504117 V: 2.504126
E
ØC 2517
2518
ØF 2522
effective depth G
D
C 2512
(Square)
2514 3 / 4 " BSP 1 / 2 " BSP
2515 20 40 M6 12 15 35 M6 12
ØC 2517 N: 367141.503 N: 367141.703
2518
ØF 2522
effective depth G
B D
2512
(Italian)
2514 1 / 2 " BSP 3 / 8 " BSP
N: X.367508.101 N: X.367508.201
ØC 2515
23,5 40 M8 13 15 30 M6 13
2517 3 / 4 " BSP 1 / 2 " BSP
2518 N: X.367508.102 N: X.367508.202
Dimensions readings and approximative characteristics subject to modifications.
2522
4 holes Ø F
effective depth G
F
(Threaded) 2512
2514
2515 1" 1/2"
2517 18 14
Gaz Gaz
ØF 2518
effective depth G 2522
U 2512
1"5/16
12
20
7/8"
14
17
(Threaded UNF UNF
SAE J 475) 2B 2B
2514
2515 1"5/16 1"1/16
ØF 2517
12
20 12
20
UNF UNF
effective depth G 2518 2B 2B
2522
Y D
2512 26 47,6 22,4 M10 14 15 17,4 38 M8 14
(ISO 6162)
2514
E
ØC 2515
ØF 2517 26 52,4 26,2 M10 14 15 17,4 38 M8 14
effective depth G 2518
F.T 25 1341 2/4
2522
X 2512
2514
(without ports)
2515
Only with rear body Type A
2517
2518
2522 Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
internal return
Dimensions readings and approximative characteristics subject to modifications.
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 25 1341 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
10 20
C03 C03
Taper 1/5
72 F 69 F
46 56
F2 F1
M14 x 150
2,5 20
11 - 0,1
0
0
4 - 0,03 0
4 - 0,03
- 0,006
- 0,017
17,5 - 0,1
0
F3 F3
Ø20
Ø16
25
15,5 19,5
40
Ø 19,4
50 N.m 50 N.m
F.T 25 1341 4/4
130,3
A 106,3
B
14 12 Ø 95
2 holes
Ø11
35
- 0,036
- 0,071
16,5
104
Ø 75
P2 T1 T2 P1
1 1 54 25
86
Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
F.T 25 1344 1/4
PSI
bar
P
H
(HPI)
2512
2514 1 " BSP 1 / 2 " BSP
2515 26 47,6 22,4 M6 12 15 17,4 38 M6 12 N: 2.500496 N: 2.500055
V: 2.504117 V: 2.504126
E
ØC 2517
2518
ØF 2522
effective depth G
D
C 2512
(Square)
2514 3 / 4 " BSP 1 / 2 " BSP
2515 20 40 M6 12 15 35 M6 12
ØC 2517 N: 367141.503 N: 367141.703
2518
ØF 2522
effective depth G
B D
2512
(Italian)
2514 1 / 2 " BSP 3 / 8 " BSP
N: X.367508.101 N: X.367508.201
ØC 2515
23,5 40 M8 13 15 30 M6 13
2517 3 / 4 " BSP 1 / 2 " BSP
2518 N: X.367508.102 N: X.367508.202
Dimensions readings and approximative characteristics subject to modifications.
2522
4 holes Ø F
effective depth G
F
(Threaded) 2512
2514
2515 1" 1/2"
2517 18 14
Gaz Gaz
ØF 2518
effective depth G 2522
U 2512
1"5/16
12
20
7/8"
14
17
(Threaded UNF UNF
SAE J 475) 2B 2B
2514
2515 1"5/16 1"1/16
ØF 2517
12
20 12
20
UNF UNF
effective depth G 2518 2B 2B
2522
Y D
2512 26 47,6 22,4 M10 14 15 17,4 38 M8 14
(ISO 6162)
2514
E
ØC 2515
ØF 2517 26 52,4 26,2 M10 14 15 17,4 38 M8 14
effective depth G 2518
F.T 20 1344 2/4
2522
X 2512
2514
(without ports)
2515
Only with rear body Type A
2517
2518
2522 Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
internal return
Dimensions readings and approximative characteristics subject to modifications.
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 20 1344 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
Tapered
10
C05
Cône 1/5
100 F
1,5 54
36,5
F1
13,67 - 0,1
M18 x 250
0
-0
5 - 0,03
F2
12,5
19 25
70 N.m
F.T 20 1344 4/4
Ø 85,9
130,3
A 106,3
B
14 12 Ø 95
2 holes
Ø11
35
- 0,036
- 0,071
16,5
104
Ø 75
P2 T1 T2 P1
1 1 54 25
86
Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
F.T 25 1346 1/4
PSI
bar
P
H
(HPI)
2512
2514 1 " BSP 1 / 2 " BSP
2515 26 47,6 22,4 M6 12 15 17,4 38 M6 12 N: 2.500496 N: 2.500055
V: 2.504117 V: 2.504126
E
ØC 2517
2518
ØF 2522
effective depth G
D
C 2512
(Square)
2514 3 / 4 " BSP 1 / 2 " BSP
2515 20 40 M6 12 15 35 M6 12
ØC 2517 N: 367141.503 N: 367141.703
2518
ØF 2522
effective depth G
B D
2512
(Italian)
2514 1 / 2 " BSP 3 / 8 " BSP
N: X.367508.101 N: X.367508.201
ØC 2515
23,5 40 M8 13 15 30 M6 13
2517 3 / 4 " BSP 1 / 2 " BSP
2518 N: X.367508.102 N: X.367508.202
Dimensions readings and approximative characteristics subject to modifications.
2522
4 holes Ø F
effective depth G
F
(Threaded) 2512
2514
2515 1" 1/2"
2517 18 14
Gaz Gaz
ØF 2518
effective depth G 2522
U 2512
1"5/16
12
20
7/8"
14
17
(Threaded UNF UNF
SAE J 475) 2B 2B
2514
2515 1"5/16 1"1/16
ØF 2517
12
20 12
20
UNF UNF
effective depth G 2518 2B 2B
2522
Y D
2512 26 47,6 22,4 M10 14 15 17,4 38 M8 14
(ISO 6162)
2514
E
ØC 2515
ØF 2517 26 52,4 26,2 M10 14 15 17,4 38 M8 14
effective depth G 2518
F.T 20 1346 2/4
2522
X 2512
2514
(without ports)
2515
Only with rear body Type A
2517
2518
2522 Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
Dimensions readings and approximative characteristics subject to modifications.
internal return
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
F.T 20 1346 3/4
100
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
Tapered
10
C05
Cône 1/5
100 F
1,5 54
36,5
F1
13,67 - 0,1
M18 x 250
0
-0
5 - 0,03
F2
12,5
19 25
70 N.m
F.T 20 1346 4/4
A 88
B 36 36
8 12 r 45
4 holes Ø 9
42,5
34,5
35
- 0,030
- 0,060
116
16,5
104
65,5
P2 T1 T2 P1
Cotes dimensionnelles et caractéristiques approximatives sous réserves de modifications
1 1 r8
86
Direction 1 Direction 2
12 138 82
Nitrile: K5073298 + K5096830
15 - 17 - 18 - 22 154 90 Viton: K5073299 + K5096840
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
F.T 25 1348 1/4
PSI
bar
P
H
(HPI)
2512
2514 1 " BSP 1 / 2 " BSP
2515 26 47,6 22,4 M6 12 15 17,4 38 M6 12 N: 2.500496 N: 2.500055
V: 2.504117 V: 2.504126
E
ØC 2517
2518
ØF 2522
effective depth G
D
C 2512
(Square)
2514 3 / 4 " BSP 1 / 2 " BSP
2515 20 40 M6 12 15 35 M6 12
ØC 2517 N: 367141.503 N: 367141.703
2518
ØF 2522
effective depth G
B D
2512
(Italian)
2514 1 / 2 " BSP 3 / 8 " BSP
N: X.367508.101 N: X.367508.201
ØC 2515
23,5 40 M8 13 15 30 M6 13
2517 3 / 4 " BSP 1 / 2 " BSP
2518 N: X.367508.102 N: X.367508.202
Dimensions readings and approximative characteristics subject to modifications.
2522
4 holes Ø F
effective depth G
F
(Threaded) 2512
2514
2515 1" 1/2"
2517 18 14
Gaz Gaz
ØF 2518
effective depth G 2522
U 2512
1"5/16
12
20
7/8"
14
17
(Threaded UNF UNF
SAE J 475) 2B 2B
2514
2515 1"5/16 1"1/16
ØF 2517
12
20 12
20
UNF UNF
effective depth G 2518 2B 2B
2522
Y D
2512 26 47,6 22,4 M10 14 15 17,4 38 M8 14
(ISO 6162)
2514
E
ØC 2515
ØF 2517 26 52,4 26,2 M10 14 15 17,4 38 M8 14
effective depth G 2518
F.T 25 1348 2/4
2522
X 2512
2514
(without ports)
2515
Only with rear body Type A
2517
2518
2522 Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
internal return
Dimensions readings and approximative characteristics subject to modifications.
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 25 1348 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
10 20
45 F 42 F
19 29
F1
F2
M14 x 150
2,5 20
11 - 0,1
0
0
0
4 - 0,03 4 - 0,03
- 0,006
Ø16 - 0,017
17,5 - 0,1
F3
0
F3
Ø20
25
15,5 19,5
Dimensions readings and approximative characteristics subject to modifications.
50 N.m 50 N.m
F.T 25 1348 4/4
A 88
B 36 36
8 12 r 45
4 holes Ø 9
42,5
34,5
35
- 0,030
- 0,060
16,5
104
65,5
P2 T1 T2 P1
Cotes dimensionnelles et caractéristiques approximatives sous réserves de modifications
1 1 r8
86
Direction 1 Direction 2
12 138 82
Nitrile: K5073298 + K5069830 + K101517
15 - 17 - 18 - 22 154 90
Viton: K5073299 + K5069840 + K104406
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
F.T 25 1350 1/4
PSI
bar
P
H
(HPI)
2512
2514 1 " BSP 1 / 2 " BSP
2515 26 47,6 22,4 M6 12 15 17,4 38 M6 12 N: 2.500496 N: 2.500055
V: 2.504117 V: 2.504126
E
ØC 2517
2518
ØF 2522
effective depth G
D
C 2512
(Square)
2514 3 / 4 " BSP 1 / 2 " BSP
2515 20 40 M6 12 15 35 M6 12
ØC 2517 N: 367141.503 N: 367141.703
2518
ØF 2522
effective depth G
B D
2512
(Italian)
2514 1 / 2 " BSP 3 / 8 " BSP
N: X.367508.101 N: X.367508.201
ØC 2515
23,5 40 M8 13 15 30 M6 13
2517 3 / 4 " BSP 1 / 2 " BSP
2518 N: X.367508.102 N: X.367508.202
Dimensions readings and approximative characteristics subject to modifications.
2522
4 holes Ø F
effective depth G
F
(Threaded) 2512
2514
2515 1" 1/2"
2517 18 14
Gaz Gaz
ØF 2518
effective depth G 2522
U 2512
1"5/16
12
20
7/8"
14
17
(Threaded UNF UNF
SAE J 475) 2B 2B
2514
2515 1"5/16 1"1/16
ØF 2517
12
20 12
20
UNF UNF
effective depth G 2518 2B 2B
2522
Y D
2512 26 47,6 22,4 M10 14 15 17,4 38 M8 14
(ISO 6162)
2514
E
ØC 2515
ØF 2517 26 52,4 26,2 M10 14 15 17,4 38 M8 14
effective depth G 2518
F.T 25 1350 2/4
2522
X 2512
2514
(without ports)
2515
Only with rear body Type A
2517
2518
2522 Consult us for availability
L A
Standard with ports
21,5 38 24,5
51,5
35
104
104
84 84
X T
High pressure relief valve High pressure relief valve
(Adjustable) Internal return (Adjustable) External return
25,5 7,5 14
19 on flats
51,5
104
38
24 17 on flats
84 12
(2x) M6 effective depth 14
Blank port
connector only
internal return
Dimensions readings and approximative characteristics subject to modifications.
V W
Low Pressure relief valve Low Pressure relief valve
(Adjustable) Internal return (Adjustable) External return
24 70 15
26
51,5
38
104
17 on flats
84
AR Q
with block configuration MBPS Flow control
Internal return 12
84 24
Block MBPS r 21
50
52
100
F.T 25 1350 3/4
42,5 50,5 18
24 24
30
3/8" BSP (x2) effective depth 17,5
10 20
45 F 42 F
19 29
F1
F2
M14 x 150
2,5 20
11 - 0,1
0
0
0
4 - 0,03 4 - 0,03
- 0,006
Ø16 - 0,017
17,5 - 0,1
F3
0
F3
Ø20
25
15,5 19,5
Dimensions readings and approximative characteristics subject to modifications.
50 N.m 50 N.m
F.T 25 1350 4/4
F.T R 0268
F.T 20 1410
F.T 20 1411
F.T 20 1412
95
PUMP 95 Data sheet
F.T 20 1413
P1
P2
P C II
79
III / IV
FV
A VI
2VII
004
VIII / IX / X
AXI
1XII
AA 00
XIII / XIV XV / XVI
I
Sign Sign Signs Sign Sign Sign Signs Sign Sign Signs Signs
Dimensions readings and approximative characteristics subject to modifications.
PuMP P
OPTION
STANDARD
CATALOGUE C 00 Without option
CODE of SHAFT
Series 2 2
C DIN location
B Italian location
(00)4 - (00)6 - (00)8 - (0)10 - ( 0)12 - (0)14 - (0)16 - (0)18 - (0)20 - (0)22 - (0)25 F BSPP location
** In the case of multistage pumps, the sum of the driving torque of the stage which simultaneously
run, must be less than the maximum torque permited to the drive shaft.
- Maximum drive torque on the coupling between stages: 70N.m .
General characteristics:
For using beside these limits, please ask our technical department.
Port location
B C
(capacity)
35,5
2004 24 45,95
2006 25,5 48,95
2008 27 51,95
16
2012 30 57,95
2014 31,5 60,95
2016 33 63,95
2018 34,5 66,95
2020 36 69,95
2022 37,5 72,95
2025 39 75,95 Flat Port location Rear body
F.T 20 1409 1/5
front body
Rear bodies: E
AA 22
79
X X
86
4
6
Dimensions readings and approximative characteristics subject to modifications.
8
X X
10
12
87 14
16
X X
18
20
95
22
25
X X
LEGENDES
79 86 87
106,4 106,4
(X4) Ø 9 72 r9
r 47,5 r 47,5
r 12 r 12
34,5
100
(2x) Ø 11 (2x) Ø 11
82 82
Dimensions readings and approximative characteristics subject to modifications.
0 0 - 0,060
Centering: Ø 82,55 - 0,05 Centering: Ø 82,55 - 0,05 Centering: Ø 80 - 0,0106
0 0 0
Thickness: 6,5 - 0,2 Tightness: 6 - 0,2 Tightness: 7 - 0,2
95
106,4
r 10
(X2) Ø 11 10°
0
Centering: Ø 82,55 - 0,05
Tightness: 11 ± 0,165
87 : F.T 20 1412
F.T 20 1409 3/5
INLET OUTLET
Capacity (T) (P)
ØA ØB ØC D E ØA ØB ØC D E
C C
(DIN)
2004
bis 20 M6 40 13 15 M6 35 13
ØA 2025
ØB
effective depth D
C
B 2004
bis 13,5 M6 30 13 13,5 M6 30 13
(Italian)
2010
Dimensions readings and approximative characteristics subject to modifications.
ØA 2015
bis 20 M8 40 13 13,5 M6 30 13
ØB 2025
effective depth D
Y C 2004
bis 15 M8 17,4 38 14 15 M8 17,4 38 14
(ISO)
2016
ØA
D
2018
4 holes Ø B bis 20 M10 47,6 22,4 14 15 M8 38 17,4 14
effective depth E 2025
2004
F bis
1/2"
BSP
1/2"
BSP
(BSP) 2012
2014
Ø A 3/4" 1/2"
bis
2025 BSP BSP
REAR BODIES
AA
Standard
22
35,5
100
F.T 20 1409 4/5
82
DRIVING SHAFT
Splined
F (11 teeth)
F A F B F C
F F F
31,5 ± 0,3 32,9 ± 0,3 37,7 ± 0,3
Ø18,7 - 0,02
Ø18,7 - 0,02
Ø18,7 - 0,02
0
0
Ø17
Ø17
Ø17
21 2,5 17 8
17 12,8
Front body
Face of the support
F of the fixing flange SAE "A"
0 2 holes Ø 11
6,5 - 0,2
A
B 106,4
12
r 47,5
Ø 82,55
16
101
P2 T1 T2 P1
1 1
84
Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
2004 86,95 65
2006 89,95 66,5
2008 92,95 68
2010 95,95 69,5
2012 98,95 72
2014 101,95 73,5
2016 104,95 75
2018 107,95 76,5
2020 110,95 78
2022 113,95 79,5
2025 116,95 81
** In the case of multistage pumps, the sum of the driving torque of the stage which simultaneously
run, must be less than the maximum torque permited to the drive shaft.
- Maximum drive torque on the coupling between stages: 70N.m .
General characteristics:
For using beside these limits, please ask our technical department.
INLET OUTLET
Capacity (T) (P)
ØA ØB ØC D E ØA ØB ØC D E
C C
(DIN)
2004
bis 20 M6 40 13 15 M6 35 13
ØA 2025
ØB
effective depth D
C
B 2004
bis 13,5 M6 30 13 13,5 M6 30 13
(Italian)
2010
ØA 2015
bis 20 M8 40 13 13,5 M6 30 13
ØB 2025
Dimensions readings and approximative characteristics subject to modifications.
effective depth D
Y C 2004
bis 15 M8 17,4 38 14 15 M8 17,4 38 14
(ISO)
2016
ØA
D
2018
4 holes Ø B bis 20 M10 47,6 22,4 14 15 M8 38 17,4 14
effective depth E 2025
2004
F bis
1/2"
BSP
1/2"
BSP
(BSP) 2012
2014
Ø A 3/4" 1/2"
bis
2025 BSP BSP
REAR BODIES
AA
Standard
22
35,5
100
F.T 20 1410 2/3
82
Splined
F (11 teeth)
F A F B F C
F F F
31,5 ± 0,3 32,9 ± 0,3 37,7 ± 0,3
Ø18,7 - 0,02
Ø18,7 - 0,02
Ø18,7 - 0,02
0
0
Ø17
Ø17
Ø17
21 2,5 17 8
17 12,8
Front body
Face of the support
F of the fixing flange SAE "A"
0 2 holes Ø 11
6 - 0,2 A
B 106,4
12
r 47,5
Ø 82,55
16
101
P2 T1 T2 P1
1 1
84
Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
2004 86,95 65
2006 89,95 66,5
2008 92,95 68
2010 95,95 69,5
2012 98,95 72
2014 101,95 73,5
2016 104,95 75
2018 107,95 76,5
2020 110,95 78
2022 113,95 79,5
2025 116,95 81
** In the case of multistage pumps, the sum of the driving torque of the stage which simultaneously
run, must be less than the maximum torque permited to the drive shaft.
- Maximum drive torque on the coupling between stages: 70N.m .
General characteristics:
For using beside these limits, please ask our technical department.
INLET OUTLET
Capacity (T) (P)
ØA ØB ØC D E ØA ØB ØC D E
C C
(DIN)
2004
bis 20 M6 40 13 15 M6 35 13
ØA 2025
ØB
effective depth D
C
B 2004
bis 13,5 M6 30 13 13,5 M6 30 13
(Italian)
2010
ØA 2015
bis 20 M8 40 13 13,5 M6 30 13
ØB 2025
Dimensions readings and approximative characteristics subject to modifications.
effective depth D
Y C 2004
bis 15 M8 17,4 38 14 15 M8 17,4 38 14
(ISO)
2016
ØA
D
2018
4 holes Ø B bis 20 M10 47,6 22,4 14 15 M8 38 17,4 14
effective depth E 2025
2004
F bis
1/2"
BSP
1/2"
BSP
(BSP) 2012
2014
Ø A 3/4" 1/2"
bis
2025 BSP BSP
REAR BODIES
AA
Standard
22
35,5
100
F.T 20 1411 2/3
82
Splined
F (11 teeth)
F A F B F C
F F F
31,5 ± 0,3 32,9 ± 0,3 37,7 ± 0,3
Ø18,7 - 0,02
Ø18,7 - 0,02
Ø18,7 - 0,02
0
0
Ø17
Ø17
Ø17
21 2,5 17 8
17 12,8
34,5
Ø 80
16
100
101
P2 T1 T2 P1
r9 r9
1 1
84 Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
2004 86,95 65
2006 89,95 66,5
2008 92,95 68
2010 95,95 69,5
2012 98,95 72
2014 101,95 73,5
2016 104,95 75
2018 107,95 76,5
2020 110,95 78
2022 113,95 79,5
2025 116,95 81
** In the case of multistage pumps, the sum of the driving torque of the stage which simultaneously
run, must be less than the maximum torque permited to the drive shaft.
- Maximum drive torque on the coupling between stages: 70N.m .
General characteristics:
For using beside these limits, please ask our technical department.
INLET OUTLET
Capacity (T) (P)
ØA ØB ØC D E ØA ØB ØC D E
C C
(DIN)
2004
bis 20 M6 40 13 15 M6 35 13
ØA 2025
ØB
effective depth D
C
B 2004
bis 13,5 M6 30 13 13,5 M6 30 13
(Italian)
2010
ØA 2015
bis 20 M8 40 13 13,5 M6 30 13
ØB 2025
Dimensions readings and approximative characteristics subject to modifications.
effective depth D
Y C 2004
bis 15 M8 17,4 38 14 15 M8 17,4 38 14
(ISO)
2016
ØA
D
2018
4 holes Ø B bis 20 M10 47,6 22,4 14 15 M8 38 17,4 14
effective depth E 2025
2004
F bis
1/2"
BSP
1/2"
BSP
(BSP) 2012
2014
Ø A 3/4" 1/2"
bis
2025 BSP BSP
REAR BODIES
AA
Standard
22
35,5
100
F.T 20 1412 2/3
82
Splined
F (11 teeth)
F A F B F C
F F F
31,5 ± 0,3 32,9 ± 0,3 37,7 ± 0,3
Ø18,7 - 0,02
Ø18,7 - 0,02
Ø18,7 - 0,02
0
0
Ø17
Ø17
Ø17
21 2,5 17 8
17 12,8
11 ± 0,165
A
B
13 2 holes Ø 11
106,4 Ø 60
10°
Ø 82,55
16
102
r 10
r 10
P2 T1 T2 P1
1 1 Direction 1 Direction 2
84
Dimensions readings and approximative characteristics subject to modifications.
2004 86,95 65
2006 89,95 66,5
2008 92,95 68
2010 95,95 69,5
2012 98,95 72
2014 101,95 73,5
2016 104,95 75
2018 107,95 76,5
2020 110,95 78
2022 113,95 79,5
2025 116,95 81
** In the case of multistage pumps, the sum of the driving torque of the stage which simultaneously
run, must be less than the maximum torque permited to the drive shaft.
- Maximum drive torque on the coupling between stages: 70N.m .
General characteristics:
For using beside these limits, please ask our technical department.
INLET OUTLET
Capacity (T) (P)
ØA ØB ØC D E ØA ØB ØC D E
C C
(DIN)
2004
bis 20 M6 40 13 15 M6 35 13
ØA 2025
ØB
effective depth D
C
B 2004
bis 13,5 M6 30 13 13,5 M6 30 13
(Italian)
2010
ØA 2015
bis 20 M8 40 13 13,5 M6 30 13
ØB 2025
Dimensions readings and approximative characteristics subject to modifications.
effective depth D
Y C 2004
bis 15 M8 17,4 38 14 15 M8 17,4 38 14
(ISO)
2016
ØA
D
2018
4 holes Ø B bis 20 M10 47,6 22,4 14 15 M8 38 17,4 14
effective depth E 2025
2004
F bis
1/2"
BSP
1/2"
BSP
(BSP) 2012
2014
Ø A 3/4" 1/2"
bis
2025 BSP BSP
REAR BODIES
AA
Standard
22
35,5
F.T 20 1413 2/3
100
82
Splined
F (11 teeth)
F A F B F C
F F F
31,5 ± 0,3 32,9 ± 0,3 37,7 ± 0,3
Ø18,7 - 0,02
Ø18,7 - 0,02
Ø18,7 - 0,02
0
0
Ø17
Ø17
Ø17
21 2,5 17 8
17 12,8
F.T 26 1314
Data sheet
PUMP AAN
F.T 26 1315
Data sheet
PUMP AAK
F.T 26 1351
Data sheet
PUMP BAN
F.T 26 1316
Data sheet
PUMP CBN
F.T 26 1317
Data sheet
MULTIPLES PUMPS
F.T 26 1318
2620 19,6 330 4185 280 4060 3000 29,40 58,80 3,70 36,66
2625 24,2 330 4185 280 4060 3000 36,30 72,60 4,50 45,27
2627 27,5 330 4185 280 4060 3000 41,25 82,50 5 51,25
2630 30,5 330 4185 280 4060 3000 45,75 91,50 5,70 57,05 8
2635 34,5 290 4205 250 3625 3000 51,75 103,50 6,40 64,54
2640 39,8 250 3625 210 3045 3000 59,70 119,40 7,50 74,45
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
PSI
bar
P
Time (seconds) Max. 30 s
A C E
Front bodies: A B
AAN / AAK - BAN - CBN 22
47,5
Capacity: B C
2620 37 74,1
2625 39,3 78,6
135
2627 41 82
2630 42,5 85,1
2635 44,5 89,1
2640 47,3 94,6
F.T 26 1314 1/5
Rear body: E
L 31,2
Front body Port location Rear body
AAN / AAK
X X
BAN
2620
2625
2627
X X
2630
Dimensions readings and approximative characteristics subject to modifications.
2635
2640 10 B09
CBN 30 A24
10 C09
X X
LEGENDES
(x2) Ø 14
Ø 120 98,4
(x4) Ø 11
110
(x4) Ø 8,5 B09 Taper 1 / 8 A24
47 ± 0,3 F F
r 14
52,9
52,9
42,9
F F
32,5
47 ± 0,3
14,4
148,1
148,1
128,1
110
Ø22,187 - 0,052
3,973 ± 0,15 41,2 ± 0,3
0
M 14 x 150
Ø22,5
Ø22,5
± 0,2
130 130
11,8
11,2 25
-0 -0
Centering: Ø 101,6- 0,05 Centering: Ø 50,78- 0,05
- 0,03
Centering: Ø 65 - 0,06 Ø21,59 33,3 7,9
Thickness: 9,5 Thickness: 5 Thickness: 5
Delivered with nut Ref.: K102045
AAN: F.T 26 1315 Involute spline SAE "B" - 13 teeth -
BAN: F.T 26 1316 CBN: F.T 26 1317 and washer Ref.: K102100
Diametral Pitch 16/32
Maxi transmissible torque 30° Pressure angle
AAK: F.T 26 1351
530 N.m
Maxi transmissible torque
CHOICE of the IMPLANTATIONS of PORTS and RECOMMENDED FLANGES
310 N.m
Dimensions readings and approximative characteristics subject to modifications.
M 16 x 150
Ø22,5
2630
± 0,2
1" 3/4"
- 19
BSP 16
11,8
BSP 15
2635 Ø21,6
Ø F 1"
effective depth G 2640 1/4 21
Delivered with nut Ref.: K106924
BSP
and washer Ref.: K102101
2620
D bis 1" BSP Maxi transmissible torque
Y 2627
25 52,4 26,2 M8 14 N: 368557.002 550 N.m
(ISO 6162)
2630 1" BSP
- 30 58,7 30,2 M10 14 22 52,4 26,2 M10 14 N: 368557.002
E
REAR BODY
L
Standard
47,5
F.T 26 1314 4/5
6/6
F.T 26 1314 5/5
135
105 31,2
home contents previous next main dimensions PUBLISHING 01/2016 home contents previous next main dimensions PUBLISHING 01/2016
290 291
/ 00 / 00
SERIES 2,6 TYPE AAN
VI IX X XI XII
AA N 2 6
II
P Sign Sign Y L Sign Sign Sign Sign
For CODIFICATION, see data sheet F.T R 0011
9,5
A
B 146
15
Ø 120
r 14
22
47,5
- 0,05
0
Ø 101,6
P2 T1 T2 P1
r 15
2 holes Ø 14
1
1
107
Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
2620 19,6 330 4185 280 4060 3000 29,40 58,80 3,70 36,66
2625 24,2 330 4185 280 4060 3000 36,30 72,60 4,50 45,27
2627 27,5 330 4185 280 4060 3000 41,25 82,50 5 51,25
8
2630 30,5 330 4185 280 4060 3000 45,75 91,50 5,70 57,05
2635 34,5 290 4205 250 3625 3000 51,75 103,50 6,40 64,54
2640 39,8 250 3625 210 3045 3000 59,70 119,40 7,50 74,45
P1
P3 Allowable peack pressure.
F.T 26 1315 1/3
PSI
bar
P
2630
- 1" 19 3/4"
2635 BSP BSP 16
Ø F 1"
effective depth G
2640 1/4 21
BSP
2620
D 1" BSP
bis
Y 2627
25 52,4 26,2 M8 14 N: 368557.002
(ISO 6162)
2630 1" BSP
- 30 58,7 30,2 M10 14 22 52,4 26,2 M10 14 N: 368557.002
E
REAR BODY
L
Standard
47,5
135
105 31,2
F.T 26 1315 2/3
10 20 30 40
B09 Taper 1 / 8
47 ± 0,3
F A24 F
14,4
Ø22,187 - 0,052
3,973 ± 0,15 41,2 ± 0,3
0
M 14 x 150
Ø22,5
Ø22,5
± 0,2
11,8
11,2 25
Ø21,59 33,3 7,9
530 N.m
Maxi transmissible torque
310 N.m
Dimensions readings and approximative characteristics subject to modifications.
C09 Taper 1 / 5
54 ± 0,3 F
16
-0
5 - 0,03
M 16 x 150
Ø22,5
± 0,2
11,8
15
Ø21,6
550 N.m
F.T 26 1315 3/3
Ø 102,4
9,5
A
B 146
15
Ø 120
r 14
22
47,5
- 0,05
0
Ø 101,6
P2 T1 T2 P1
r 15
2 holes Ø 14
1
1
107
Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
2620 19,6 330 4185 280 4060 3000 29,40 58,80 3,70 36,66
2625 24,2 330 4185 280 4060 3000 36,30 72,60 4,50 45,27
2627 27,5 330 4185 280 4060 3000 41,25 82,50 5 51,25
8
2630 30,5 330 4185 280 4060 3000 45,75 91,50 5,70 57,05
2635 34,5 290 4205 250 3625 3000 51,75 103,50 6,40 64,54
2640 39,8 250 3625 210 3045 3000 59,70 119,40 7,50 74,45
P1
P3 Allowable peack pressure.
F.T 26 1351 1/3
PSI
bar
P
2630
- 1" 19 3/4"
2635 BSP BSP 16
Ø F 1"
effective depth G
2640 1/4 21
BSP
2620
D bis 1" BSP
25 52,4 26,2 M8 14 N: 368557.002
2627
Y
(ISO 6162) 2630 1" BSP
- 30 58,7 30,2 M10 14 22 52,4 26,2 M10 14 N: 368557.002
E
REAR BODY
L
Standard
47,5
135
105 31,2
F.T 26 1351 2/3
10 20 30 40
B09 Taper 1 / 8
A24
47 ± 0,3
F F
14,4
Ø22,187 - 0,052
3,973 ± 0,15 41,2 ± 0,3
0
M 14 x 150
Ø22,5
Ø22,5
± 0,2
11,8
11,2 25
Ø21,59 33,3 7,9
530 N.m
Maxi transmissible torque
310 N.m
Dimensions readings and approximative characteristics subject to modifications.
C09
Taper 1 / 5
54 ± 0,3 F
16
-0
5 - 0,03
M 16 x 150
Ø22,5
± 0,2
11,8
15
Ø21,6
550 N.m
F.T 26 1351 3/3
5 A
B 130
15 4 trous Ø 11
98,4
52,9
47,5
42,9
- 0,05
0
148,1
Ø 50,78
128,1
135
P2 T1 T2 P1
r 10
1 1 r 10
107
Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
2620 19,6 330 4185 280 4060 3000 29,40 58,80 3,70 36,66
2625 24,2 330 4185 280 4060 3000 36,30 72,60 4,50 45,27
2627 27,5 330 4185 280 4060 3000 41,25 82,50 5 51,25
8
2630 30,5 330 4185 280 4060 3000 45,75 91,50 5,70 57,05
2635 34,5 290 4205 250 3625 3000 51,75 103,50 6,40 64,54
2640 39,8 250 3625 210 3045 3000 59,70 119,40 7,50 74,45
P1
P3 Allowable peack pressure.
F.T 26 1316 1/3
PSI
bar
P
2630
1" 19 3/4"
-
BSP BSP 16
2635
Ø F 1"
effective depth G 1/4 21
2640
BSP
2620
D bis 1" BSP
25 52,4 26,2 M8 14
Y 2627
N: 368557.002
(ISO 6162)
2630 1" BSP
- 30 58,7 30,2 M10 14 22 52,4 26,2 M10 14 N: 368557.002
E
REAR BODY
L
Standard
47,5
135
105 31,2
F.T 26 1316 2/3
10 20 30 40
Ø22,187 - 0,052
3,973 ± 0,15 41,2 ± 0,3
0
M 14 x 150
Ø22,5
Ø22,5
± 0,2
11,8
11,2 25
Ø21,59 33,3 7,9
530 N.m
Maxi transmissible torque
310 N.m
Dimensions readings and approximative characteristics subject to modifications.
C09 Taper 1 / 5
54 ± 0,3 F
16
-0
5 - 0,03
M 16 x 150
Ø22,5
± 0,2
11,8
15
Ø21,6
550 N.m
F.T 26 1316 3/3
5 A
B 130
15 4 holes Ø 8,5
110
52,9
47,5
32,5
- 0,03
- 0,06
148,1
20
135
110
P2 T1 T2 P1
r 10
1 1 r 10
107
Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
2620 19,6 330 4185 280 4060 3000 29,40 58,80 3,70 36,66
2625 24,2 330 4185 280 4060 3000 36,30 72,60 4,50 45,27
2627 27,5 330 4185 280 4060 3000 41,25 82,50 5 51,25
8
2630 30,5 330 4185 280 4060 3000 45,75 91,50 5,70 57,05
2635 34,5 290 4205 250 3625 3000 51,75 103,50 6,40 64,54
2640 39,8 250 3625 210 3045 3000 59,70 119,40 7,50 74,45
P1
P3 Allowable peack pressure.
F.T 26 1317 1/3
PSI
bar
P
2630
1" 19 3/4"
-
BSP BSP 16
2635
Ø F 1"
2640
effective depth G 1/4 21
BSP
2620
D bis 1" BSP
Y 2627
25 52,4 26,2 M8 14 N: 368557.002
(ISO 6162)
2630 1" BSP
- 30 58,7 30,2 M10 14 22 52,4 26,2 M10 14 N: 368557.002
E
N: 368557.003
ØF 2640 32 58,7 30,2 M10 14
effective depth G
REAR BODY
L
Standard
47,5
135
105 31,2
F.T 26 1317 2/3
10 20 30 40
Ø22,187 - 0,052
3,973 ± 0,15 41,2 ± 0,3
0
M 14 x 150
Ø22,5
Ø22,5
± 0,2
11,8
11,2 25
Ø21,59 33,3 7,9
530 N.m
Maxi transmissible torque
310 N.m
Dimensions readings and approximative characteristics subject to modifications.
Taper 1 / 5
C09
54 ± 0,3 F
16
-0
5 - 0,03
M 16 x 150
Ø22,5
± 0,2
11,8
15
Ø21,6
550 N.m
F.T 26 1317 3/3
A C D C E
B B
SERIES 2,6
Flat front Port location Junction body Port location Rear body
Dimensions readings and approximative characteristics subject to modifications.
body
Q Capacity in cc / rev Calculation of the torque for one pump body: 1,59 x Q x P
= C ( N.m )
1000 x Rm
P Pressure in bar
Example : P 1 BAN 2627 Y D 2620 Y L 10 B09 Pressure: 2627 200 bar Speed: 1500 t/min
Rm Méchanical efficiency 2620 150 bar
( see catalogue C10 ) 1,59 x 27 x 200
= 9,86 N.m
1000 x 0,87
F.T 26 1318
1,59 x 20 x 150
= 5,48 N.m
1000 x 0,87
= 15,34 N.m Total torque
F.T 30 1312
- FLAT FRONT BODIES
F.T 30 1320
F.T 30 1357
F.T 30 1321
F.T 30 1322
F.T 30 1358
F.T 30 1312
F.T 30 1320
3020 21,1 275 3987 235 235 3000 31,65 63,3 4 3,74 5,6
3025 25,8 275 3987 235 235 3000 38,7 77,4 4,90 4,63 5,6
3031 32,1 275 3987 235 235 3000 48,15 96,3 6,10 5,73 5,6
3040 41,5 275 3987 235 235 3000 62,25 124,5 7,85 7,37 5,7
The pump can only run in one way rotation (Precise the direction of rotation on order).
The working cycles hereunder are possible with hydraulic mineral oil for viscosities between 12 and
150 cSt (65,2 and 700 SUS).
The minimum viscosity of 12 cSt (65,2 SUS) is available for a maximum temperature in the hydraulic circuit .
Working temperature: - 20 °C (4 °F) to + 80 °C (176 °F) (140 °C (284 °F) with Viton shaft seal).
Full flow filtration: 10 to 15 microns at the pressure port of the pump or on the return circuit.
Filtration on the suction side: 125 microns.
Pressure at the inlet of the pump:
- Minimum 0,7 bar absolute (Maxi depressure 300 millibar with regard to the air pressure).
- Maximum 2 bar absolute or 1 bar over the air pressure.
The hereabove characteristics concern the pumps driven by elastic couplings perfectly aligned without any external
radial or axial force.
For any other coupling, see technical data sheet F.T R 0009.
For use at maximum working conditions and/or intensive cycles, thanks to consult our technical sales
service for validation.
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure Þ P3
P1
P3 Allowable peack pressure.
PSI
bar
F.T 30 1312 1/10
51
Port location (capacity): B C
3020 - 3025 - 3031 - 3040 36,3 72,7
150
3050 - 3060 49,5 99,2
3071 - 3080 - 3090 - 3100 59,2 119,2
Rear bodies: E
L 25
A-V 33
Flat front Port location Rear body
body
Dimensions readings and approximative characteristics subject to modifications.
Rear bodies: E
L 25
A-V 33
Thick Port location Rear body
front body
F.T 30 1312 2/10
DIRECTION of FLAT FRONT BODIES CAPACITY PORT LOCATION REAR BODIES DRIVING SHAFTS
ROTATION (IX , X and XI Sign)
(II Sign) (III and IV Sign) (V and VI (VII Sign) (VIII Sign)
TAPERED STRAIGHT SPLINED TANG
Sign)
P1 P2 KEYED
H C B U X Y L A V J* 10 20 30 40
AAN / AAK
X X
3020
BAN
3025
X X
3031
3040
3050
CBN / CBK 3060
Dimensions readings and approximative characteristics subject to modifications.
3100
DBN / DBK
X X
LEGENDES
L = Standard
P1 = Clockwise A** = Fixing SAE and ISO H= HPI
A = External flow control
P2 = Anti clockwise BAN = Fixing English and Italian C= Square location
V = Low pressure relief valve,
CB* = Fixing French B= Italian location
internal return
DB* = Fixing German U= SAE Threaded ports (Norm J 475)
J* = Pre-arrangement for assembling
ZFC = Fixing ZF X= without ports
«Module 3»
Y= ISO location (Norm 6162)
see F.T 30 1355 page
F.T 30 1312 3/10
DIRECTION of THICK FRONT BODIES CAPACITY PORT LOCATION REAR BODIES DRIVING SHAFT
ROTATION (IX , X and XI Sign)
(II Sign) (III and IV Sign) (V and VI (VII Sign) (VIII Sign)
TAPERED STRAIGHT SPLINED TANG
Sign)
P1 P2 KEYED
H C B U X Y L A V J* 10 20 30 40
AAP / AEP
AAR / AER - AAX
X X
X X
30 D04
LEGENDES
L = Standard
P1 = Clockwise A** = Fixing SAE and ISO H= HPI
A = External flow control
P2 = Anti clockwise BAN = Fixing English and Italian C= Square location
V = Low pressure relief valve,
CB* = Fixing French B= Italian location
internal return
DB* = Fixing German U= SAE Threaded ports (Norm J 475)
J* = Pre-arrangement for assembling
ZFC = Fixing ZF X= without ports
«Module 3»
Y= ISO location (Norm 6162)
see F.T 30 1355 page
F.T 30 1312 3/10
146 55 55 55 55
42,9 42,9 r6 42,9 42,9 r6
Ø 120
r 14
56,9
56,9
42,9
42,9
32,5
32,5
156,1
156,1
128,1
128,1
77,5
77,5
(2x) Ø14
r4,25 r4,25
r 10 r 10
r 14 r 14 118
114 118
0 0 - 0,03
Centering: Ø 101,6 - 0,05 Centering: Ø 50,78 - 0,05 Centering: Ø 65 - 0,06
Thicknees: 6,35 (AAN) 8,1 (AAK) Thicknees: 5 Thicknees: 5
AAN : F.T 30 1320 BAN: F.T 30 1321 CBN : F.T 30 1322
AAK : F.T 30 1357 CBK : F.T 30 1358
Dimensions readings and approximative characteristics subject to modifications.
DBN / DBK
130
110
58
48
165
97
r10
r10
(4x) Ø10,5
- 0,036
Centering: Ø 105 - 0,071
Thicknees: 8
DBN : F.T 30 1323
DBK : F.T 30 1359
F.T 30 1312 5/10
51
89,8
146
138
150
(2x) Ø14,3 (2x) Ø11
(4x) Ø14,3
-0 -0 -0
Centering: Ø 101,6 - 0,05 Centering: Ø 82,55 - 0,05 Centering: Ø 127 - 0,05
Thicknees: 6,35 Thicknees: 6,35 Thicknees: 6,35
AAP / AEP : F.T 30 1370 ABP : F.T 30 1375 ADP : F.T 30 1371
AAR / AER : F.T 30 1373 ABR : F.T 30 1376 ADR : F.T 30 1374
AAX : F.T 30 1414 ADX : F.T 30 1377
Dimensions readings and approximative characteristics subject to modifications.
ZFC
80 r 14
80
(4x) Ø13
114
- 0,03
Centering: Ø 80 - 0,06
Thicknees: 9
ZFC : F.T 30 1372
F.T 30 11312 6/10
ØC V: 3.505066 V: 3.505060
3071 3071 1" 1/2 N: 3.500493 3071 1" N: 3.500072
ØF 3080 BSP V: 3.505067 3080 BSP V: 3.505060
effective depth G to 42 35,6 69,8 M8 16 24 52,4 26,2 M8 16 3090 1" 1/2 N: 3.500493 3090 1" 1/4 N: 3.500103
3100 3100 BSP V: 3.505067 3100 BSP V: 3.505061
3020
C D to
(Square) 3040
ØC 3050
28 55 M8 17 18 55 M8 17
3060
3071
4 holes Ø F
to
effective depth G
3100
Dimensions readings and approximative characteristics subject to modifications.
3020
B D to 27 51 M10 17 18 40 M8 17
(Italian) 3040
ØC 3050
3060
4 holes Ø F 3071
effective depth G to
3100
1’ 1’
3020
U to
5/16
-12 19
1/16
-12 19
(Threaded 3040 UNF UNF
SAE J 475) 1’ 1’
3050 5/8 5/16
19 19
3060 -12 -12
UNF UNF
Ø F 3071
effective depth G to
3100
3020
Y D to 28 52,4 26,2 M10 17 18 52,4 26,2 M10 17
(ISO 6162) 3040
3050
42 69,8 35,6 M14 17 34 52,4 26,2 M10 17
ØC 3060
E
ØF 3071
effective depth G to
3100
3020
to
X 3040
(without port)
3050
Only with rear body Type A
3060
F.T 30 1312 7/10
3071
to
3100
REAR BODIES
L A
Standard with ports
75
150
150
112 112
V
Low pressure relief valve
Dimensions readings and approximative characteristics subject to modifications.
27 on flats
112
F.T 30 1312 8/10
-0
6,35 - 0,03 41,2 ± 0,35
Ø22,187 - 0,052
-0 10 ± 0,35
4 - 0,03
0
4 25 12
- 0,015
- 0,034
25 - 0,052
-0
Ø26
Ø26
Ø26
Ø24
Ø26
± 0,2
- 0,03
25
11,8
11,2
-0
33,3
Ø21,59
Involute spline SAE Standard
13 teeth - 7/8" -
Delivered with Nut Ref.: K100734 Diametral Pitch 16/32
and lock washer Ref.: K103945 30° Pressure angle
Maxi transmissible torque Maxi transmissible torque Maxi transmissible torque Maxi transmissible torque
530 N.m 290 N.m 390 N.m 70 N.m
F F F
57,5 ± 0,35
52 ± 0,35
16 36 5,5 - 0,004
6 - 0,012
5/8"-18UNF-2A
-0 57 ± 0,35
4,8
- 0,052
- 0,03 5 36
- 0,1
-0
0
Ø24,6
Ø26
26,5
Ø26
Ø26
± 0,2
Ø24g6
14,2
16,5 45 7 46 1,3
+ 0,08
0
Ø24,63 9,7
66,5 N.m
16 30 3
5/8"-18UNF-2A
± 0,35
-0 22
4,8 - 0,03
- 0,1
0
Ø24,6
Ø26
Ø26
± 0,2
15
14,2
16,5
Ø24,63
A04 A04
46 ± 0,35 F 55 ± 0,35 F
F1 25 F1 35
0,027
+ 0,03
6,35 0
0,01
Ø 31,685 ±
F2 28,1 ± F2
Ø35
Ø30
0,03
38
38,1 7,9
Ø25,37 ±
47,1 7,9
500 N.m
Dimensions readings and approximative characteristics subject to modifications.
A05 A19
46 ± 0,35 F 41,2 ± 0,35 F
30 28
F1
0,026
+ 0,03
7,93 0
0,01
Ø22,161 ±
F2
35,17 ±
Ø35
Ø30
0,03
25
47,6 7,9
Ø31,72 ±
33,3 7,9
F1 = 120 daN
F2 = 50 daN
F1 = 120 daN Involute spline SAE standard
13 teeth - 7/8"
F2 = 50 daN Diametral Pitch 16/32
30° Pressure angle
+ 0,03
Ø32,85 ±0,05
6,35
Ø34,85 ±0,05
0
Ø25,371 ±
0,01
F2 F2 F2
Ø30
Ø30
25 ±
0,03
25
Ø22,205 ±
33,3 7,9
38,1 7,9
F.T 30 1312 10/10
Front body
Face of the support
F SAE "BB"
of the front body
6,35 A
B 146
15
Ø 120
r 14
51
- 0,05
0
30
Ø 101,6
P2 T1 T2 P1
2 holes Ø 14
1,5 1,5
118 Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
3020 21,1 275 3987 235 235 3000 31,65 63,3 4 3,74 5,6
3025 25,8 275 3987 235 235 3000 38,7 77,4 4,90 4,63 5,6
3031 32,1 275 3987 235 235 3000 48,15 96,3 6,10 5,73 5,6
3040 41,5 275 3987 235 235 3000 62,25 124,5 7,85 7,37 5,7
3050 51,65 250 3625 215 215 3000 77,47 154,9 9,77 9,21 6,9
3060 62,6 225 3262 190 190 2500 93,9 156,5 11,85 11,05 7
3071 73,55 225 3262 190 190 2500 110,32 183,8 13,92 13,08 7
3080 82,95 200 2900 170 170 2200 124,42 182,4 15,59 14,60 7,1
3090 92,95 150 2175 130 130 2000 139,42 185,9 17,47 16,47 7,8
3100 103,9 150 2175 130 130 2000 155,85 207,8 19,40 18,17 8
Min. 10 s
⇒
F.T 30 1320 1/4
P1
P3 Allowable peack pressure.
PSI
bar
P
ØC V: 3.505066 V: 3.505060
3071 3071 1" 1/2 N: 3.500493 3071 1" N: 3.500072
ØF 3080 BSP V: 3.505067 3080 BSP V: 3.505060
effective depth G to 42 35,6 69,8 M8 16 24 52,4 26,2 M8 16 3090 1" 1/2 N: 3.500493 3090 1" 1/4 N: 3.500103
3100 3100 BSP V: 3.505067 3100 BSP V: 3.505061
3020
C D to
(Square) 3040
ØC 3050
28 55 M8 17 18 55 M8 17
3060
3071
Dimensions readings and approximative characteristics subject to modifications.
4 holes Ø F
to
effective depth G
3100
3020
B D to 27 51 M10 17 18 40 M8 17
(Italian) 3040
ØC 3050
3060
4 holes Ø F 3071
effective depth G to
3100
1’ 1’
3020
U to
5/16
-12 19
1/16
-12 19
(Threaded 3040 UNF UNF
SAE J 475) 1’ 1’
3050 5/8 5/16
19 19
3060 -12 -12
UNF UNF
Ø F 3071
effective depth G to
3100
3020
Y D to 28 52,4 26,2 M10 17 18 52,4 26,2 M10 17
(ISO 6162) 3040
3050
42 69,8 35,6 M14 17 34 52,4 26,2 M10 17
ØC 3060
E
ØF 3071
effective depth G to
3100
3020
to
X 3040
F.T 30 11320 2/4
(without port)
3050
Only with rear body Type A
3060
3071
to
3100
L A
Standard with ports
75
150
150
112 112
V
Dimensions readings and approximative characteristics subject to modifications.
27 on flats
112
F.T 30 1320 3/4
-0
6,35 41,2 ± 0,35
Ø22,187 - 0,052
- 0,03
-0 10 ± 0,35
4 - 0,03
0
4 25 12
- 0,015
- 0,034
25 - 0,052
-0
Ø26
Ø26
Ø26
Ø24
Ø26
± 0,2
Ø22,22 - 0,03
25
11,8
11,2 7,9
-0
-0 57 ± 0,35
4,8
- 0,052
- 0,03 5 36
- 0,1
-0
0
Ø24,6
26,5
Ø26
Ø26
Ø26
± 0,2
Ø24g6
14,2
16,5 45 7 46 1,3
+ 0,08
0
Ø24,63 9,7
66,5 N.m
16 30 3
5/8"-18UNF-2A
± 0,35
-0 22
4,8 - 0,03
- 0,1
0
Ø24,6
Ø26
Ø26
± 0,2
15
14,2
16,5
Ø24,63
Front body
Face of the support
F SAE "BB"
of the front body
Ø 102,4
8,1 A
B 146
15
Ø 120
r 14
51
- 0,05
0
30
Ø 101,6
P2 T1 T2 P1
2 holes Ø 14
1,5 1,5
118 Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
3020 21,1 275 3987 235 235 3000 31,65 63,3 4 3,74 5,6
3025 25,8 275 3987 235 235 3000 38,7 77,4 4,90 4,63 5,6
3031 32,1 275 3987 235 235 3000 48,15 96,3 6,10 5,73 5,6
3040 41,5 275 3987 235 235 3000 62,25 124,5 7,85 7,37 5,7
3050 51,65 250 3625 215 215 3000 77,47 154,9 9,77 9,21 6,9
3060 62,6 225 3262 190 190 2500 93,9 156,5 11,85 11,05 7
3071 73,55 225 3262 190 190 2500 110,32 183,8 13,92 13,08 7
3080 82,95 200 2900 170 170 2200 124,42 182,4 15,59 14,60 7,1
3090 92,95 150 2175 130 130 2000 139,42 185,9 17,47 16,47 7,8
3100 103,9 150 2175 130 130 2000 155,85 207,8 19,40 18,17 8
Min. 10 s
⇒
F.T 30 1357 1/4
P1
P3 Allowable peack pressure.
PSI
bar
P
ØC V: 3.505066 V: 3.505060
3071 3071 1" 1/2 N: 3.500493 3071 1" N: 3.500072
ØF 3080 BSP V: 3.505067 3080 BSP V: 3.505060
effective depth G to 42 35,6 69,8 M8 16 24 52,4 26,2 M8 16 3090 1" 1/2 N: 3.500493 3090 1" 1/4 N: 3.500103
3100 3100 BSP V: 3.505067 3100 BSP V: 3.505061
3020
C D to
(Square) 3040
ØC 3050
28 55 M8 17 18 55 M8 17
3060
4 holes Ø F 3071
Dimensions readings and approximative characteristics subject to modifications.
effective depth G to
3100
3020
B D to 27 51 M10 17 18 40 M8 17
(Italian) 3040
ØC 3050
3060
4 holes Ø F 3071
effective depth G to
3100
1’ 1’
3020
U to
5/16
-12 19
1/16
-12 19
(Threaded 3040 UNF UNF
SAE J 475) 1’ 1’
3050 5/8 5/16
19 19
3060 -12 -12
UNF UNF
Ø F 3071
effective depth G to
3100
3020
Y D to 28 52,4 26,2 M10 17 18 52,4 26,2 M10 17
(ISO 6162) 3040
3050
42 69,8 35,6 M14 17 34 52,4 26,2 M10 17
ØC 3060
E
ØF 3071
effective depth G to
3100
3020
to
X 3040
F.T 30 11357 2/4
(without port)
3050
Only with rear body Type A
3060
3071
to
3100
L A
Standard with ports
75
150
150
112 112
V
Dimensions readings and approximative characteristics subject to modifications.
27 on flats
112
F.T 30 1357 3/4
-0
6,35 41,2 ± 0,35
Ø22,187 - 0,052
- 0,03
-0 10 ± 0,35
4
0
- 0,03 4 25 12
- 0,015
- 0,034
25 - 0,052
-0
Ø26
Ø26
Ø26
Ø24
Ø26
± 0,2
Ø22,22 - 0,03
25
11,8
11,2 7,9
-0
-0 57 ± 0,35
4,8
- 0,052
- 0,03 5 36
- 0,1
-0
0
Ø24,6
26,5
Ø26
Ø26
Ø26
± 0,2
Ø24g6
14,2
16,5 45 7 46 1,3
+ 0,08
0
Ø24,63 9,7
16 30 3
5/8"-18UNF-2A
± 0,35
-0 22
4,8 - 0,03
- 0,1
0
Ø24,6
Ø26
Ø26
± 0,2
15
14,2
16,5
Ø24,63
48 N.m
5 A
B 55 55
17 42,9 42,9 r6
r 4,25
56,9
51
Ø 50,78 - 0,05
42,9
32,5
0
156,1
128,1
150
77,5
P2 T1 T2 P1
r 10
r 14
1,5 1,5
118 Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
3020 21,1 275 3987 235 235 3000 31,65 63,3 4 3,74 5,6
3025 25,8 275 3987 235 235 3000 38,7 77,4 4,90 4,63 5,6
3031 32,1 275 3987 235 235 3000 48,15 96,3 6,10 5,73 5,6
3040 41,5 275 3987 235 235 3000 62,25 124,5 7,85 7,37 5,7
3050 51,65 250 3625 215 215 3000 77,47 154,9 9,77 9,21 6,9
3060 62,6 225 3262 190 190 2500 93,9 156,5 11,85 11,05 7
3071 73,55 225 3262 190 190 2500 110,32 183,8 13,92 13,08 7
3080 82,95 200 2900 170 170 2200 124,42 182,4 15,59 14,60 7,1
3090 92,95 150 2175 130 130 2000 139,42 185,9 17,47 16,47 7,8
3100 103,9 150 2175 130 130 2000 155,85 207,8 19,40 18,17 8
Min. 10 s
⇒
F.T 30 1321 1/4
P1
P3 Allowable peack pressure.
PSI
bar
P
ØC V: 3.505066 V: 3.505060
3071 3071 1" 1/2 N: 3.500493 3071 1" N: 3.500072
ØF 3080 BSP V: 3.505067 3080 BSP V: 3.505060
effective depth G to 42 35,6 69,8 M8 16 24 52,4 26,2 M8 16 3090 1" 1/2 N: 3.500493 3090 1" 1/4 N: 3.500103
3100 3100 BSP V: 3.505067 3100 BSP V: 3.505061
3020
C D to
(Square) 3040
ØC 3050
28 55 M8 17 18 55 M8 17
3060
4 holes Ø F 3071
Dimensions readings and approximative characteristics subject to modifications.
effective depth G to
3100
3020
B D to 27 51 M10 17 18 40 M8 17
(Italian) 3040
ØC 3050
3060
4 holes Ø F 3071
effective depth G to
3100
1’ 1’
3020
U to
5/16
-12 19
1/16
-12 19
(Threaded 3040 UNF UNF
SAE J 475) 1’ 1’
3050 5/8 5/16
19 19
3060 -12 -12
UNF UNF
Ø F 3071
effective depth G to
3100
3020
Y D to 28 52,4 26,2 M10 17 18 52,4 26,2 M10 17
(ISO 6162) 3040
3050
42 69,8 35,6 M14 17 34 52,4 26,2 M10 17
ØC 3060
E
ØF 3071
effective depth G to
3100
3020
to
X 3040
F.T 30 11321 2/4
(without port)
3050
Only with rear body Type A
3060
3071
to
3100
L A
Standard with ports
75
150
150
112 112
V
Dimensions readings and approximative characteristics subject to modifications.
27 on flats
112
F.T 30 1321 3/4
-0
6,35 41,2 ± 0,35
Ø22,187 - 0,052
- 0,03
-0 10 ± 0,35
4 - 0,03
0
4 25 12
- 0,015
- 0,034
25 - 0,052
-0
Ø26
Ø26
Ø26
Ø24
Ø26
± 0,2
- 0,03
25
11,8
11,2 7,9
-0
33,3
Ø21,59
Involute spline SAE Standard
13 teeth - 7/8" -
Delivered with Nut Ref.: K100734 Diametral Pitch 16/32
and lock washer Ref.: K103945 30° Pressure angle
Maxi transmissible torque Maxi transmissible torque Maxi transmissible torque Maxi transmissible torque
530 N.m 290 N.m 390 N.m 70 N.m
Dimensions readings and approximative characteristics subject to modifications.
-0 57 ± 0,35
4,8 - 0,03
- 0,052
5 36
- 0,1
-0
0
Ø24,6
26,5
Ø26
Ø26
Ø26
± 0,2
Ø24g6
14,2
16,5 45 7 46 1,3
+ 0,08
0
Ø24,63 9,7
66,5 N.m
16 30 3
5/8"-18UNF-2A
± 0,35
-0 22
4,8 - 0,03
- 0,1
0
Ø24,6
Ø26
Ø26
± 0,2
15
14,2
16,5
Ø24,63
48 N.m
5 A
B 55 55
17 42,9 42,9 r6
r 4,25
56,9
51
42,9
32,5
- 0,03
- 0,06
Ø 65
156,1
128,1
150
77,5
P2 T1 T2 P1
r 10
r 14
1,5 1,5
118 Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
3020 21,1 275 3987 235 235 3000 31,65 63,3 4 3,74 5,6
3025 25,8 275 3987 235 235 3000 38,7 77,4 4,90 4,63 5,6
3031 32,1 275 3987 235 235 3000 48,15 96,3 6,10 5,73 5,6
3040 41,5 275 3987 235 235 3000 62,25 124,5 7,85 7,37 5,7
3050 51,65 250 3625 215 215 3000 77,47 154,9 9,77 9,21 6,9
3060 62,6 225 3262 190 190 2500 93,9 156,5 11,85 11,05 7
3071 73,55 225 3262 190 190 2500 110,32 183,8 13,92 13,08 7
3080 82,95 200 2900 170 170 2200 124,42 182,4 15,59 14,60 7,1
3090 92,95 150 2175 130 130 2000 139,42 185,9 17,47 16,47 7,8
3100 103,9 150 2175 130 130 2000 155,85 207,8 19,40 18,17 8
Min. 10 s
⇒
F.T 30 1322 1/4
P1
P3 Allowable peack pressure.
PSI
bar
P
ØC V: 3.505066 V: 3.505060
3071 3071 1" 1/2 N: 3.500493 3071 1" N: 3.500072
ØF 3080 BSP V: 3.505067 3080 BSP V: 3.505060
effective depth G to 42 35,6 69,8 M8 16 24 52,4 26,2 M8 16 3090 1" 1/2 N: 3.500493 3090 1" 1/4 N: 3.500103
3100 3100 BSP V: 3.505067 3100 BSP V: 3.505061
3020
C D to
(Square) 3040
ØC 3050
28 55 M8 17 18 55 M8 17
3060
4 holes Ø F 3071
Dimensions readings and approximative characteristics subject to modifications.
effective depth G to
3100
3020
B D to 27 51 M10 17 18 40 M8 17
(Italian) 3040
ØC 3050
3060
4 holes Ø F 3071
effective depth G to
3100
1’ 1’
3020
U to
5/16
-12 19
1/16
-12 19
(Threaded 3040 UNF UNF
SAE J 475) 1’ 1’
3050 5/8 5/16
19 19
3060 -12 -12
UNF UNF
Ø F 3071
effective depth G to
3100
3020
Y D to 28 52,4 26,2 M10 17 18 52,4 26,2 M10 17
(ISO 6162) 3040
3050
42 69,8 35,6 M14 17 34 52,4 26,2 M10 17
ØC 3060
E
ØF 3071
effective depth G to
3100
3020
to
X 3040
F.T 30 11322 2/4
(without port)
3050
Only with rear body Type A
3060
3071
to
3100
L A
Standard with ports
75
150
150
112 112
V
Dimensions readings and approximative characteristics subject to modifications.
27 on flats
112
F.T 30 1322 3/4
-0
6,35 41,2 ± 0,35
Ø22,187 - 0,052
- 0,03
-0 10 ± 0,35
4 - 0,03
0
4 25 12
- 0,015
- 0,034
25 - 0,052
-0
Ø26
Ø26
Ø26
Ø24
Ø26
± 0,2
- 0,03
25
11,8
11,2 7,9
-0
33,3
Ø21,59
Involute spline SAE Standard
13 teeth - 7/8" -
Delivered with Nut Ref.: K100734 Diametral Pitch 16/32
and lock washer Ref.: K103945 30° Pressure angle
Maxi transmissible torque Maxi transmissible torque Maxi transmissible torque Maxi transmissible torque
530 N.m 290 N.m 390 N.m 70 N.m
Dimensions readings and approximative characteristics subject to modifications.
-0 57 ± 0,35
4,8
- 0,052
- 0,03 5 36
- 0,1
-0
0
Ø24,6
26,5
Ø26
Ø26
Ø26
± 0,2
Ø24g6
14,2
16,5 45 7 46 1,3
+ 0,08
0
Ø24,63 9,7
16 30 3
5/8"-18UNF-2A
± 0,35
-0 22
4,8 - 0,03
- 0,1
0
Ø24,6
Ø26
Ø26
± 0,2
15
14,2
16,5
Ø24,63
Ø 65,8
A
B 55 55
17 42,9 42,9 r6
r 4,25
56,9
51
42,9
32,5
- 0,03
- 0,06
Ø 65
24
128,1
150
77,5
P2 T1 T2 P1
r 10
r 14
1,5 1,5
118 Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
3020 21,1 275 3987 235 235 3000 31,65 63,3 4 3,74 5,6
3025 25,8 275 3987 235 235 3000 38,7 77,4 4,90 4,63 5,6
3031 32,1 275 3987 235 235 3000 48,15 96,3 6,10 5,73 5,6
3040 41,5 275 3987 235 235 3000 62,25 124,5 7,85 7,37 5,7
3050 51,65 250 3625 215 215 3000 77,47 154,9 9,77 9,21 6,9
3060 62,6 225 3262 190 190 2500 93,9 156,5 11,85 11,05 7
3071 73,55 225 3262 190 190 2500 110,32 183,8 13,92 13,08 7
3080 82,95 200 2900 170 170 2200 124,42 182,4 15,59 14,60 7,1
3090 92,95 150 2175 130 130 2000 139,42 185,9 17,47 16,47 7,8
3100 103,9 150 2175 130 130 2000 155,85 207,8 19,40 18,17 8
Min. 10 s
⇒
F.T 30 1358 1/4
P1
P3 Allowable peack pressure.
PSI
bar
P
ØC V: 3.505066 V: 3.505060
3071 3071 1" 1/2 N: 3.500493 3071 1" N: 3.500072
ØF 3080 BSP V: 3.505067 3080 BSP V: 3.505060
effective depth G to 42 35,6 69,8 M8 16 24 52,4 26,2 M8 16 3090 1" 1/2 N: 3.500493 3090 1" 1/4 N: 3.500103
3100 3100 BSP V: 3.505067 3100 BSP V: 3.505061
3020
C D to
(Square) 3040
ØC 3050
28 55 M8 17 18 55 M8 17
3060
3071
4 holes Ø F
Dimensions readings and approximative characteristics subject to modifications.
to
effective depth G
3100
3020
B D to 27 51 M10 17 18 40 M8 17
(Italian) 3040
ØC 3050
3060
4 holes Ø F 3071
effective depth G to
3100
1’ 1’
3020
U to
5/16
-12 19
1/16
-12 19
(Threaded 3040 UNF UNF
SAE J 475) 1’ 1’
3050 5/8 5/16
19 19
3060 -12 -12
UNF UNF
Ø F 3071
effective depth G to
3100
3020
Y D to 28 52,4 26,2 M10 17 18 52,4 26,2 M10 17
(ISO 6162) 3040
3050
42 69,8 35,6 M14 17 34 52,4 26,2 M10 17
ØC 3060
E
ØF 3071
effective depth G to
3100
3020
to
X 3040
F.T 30 11358 2/4
(without port)
3050
Only with rear body Type A
3060
3071
to
3100
L A
Standard with ports
75
150
150
112 112
V
Dimensions readings and approximative characteristics subject to modifications.
27 on flats
112
F.T 30 1358 3/4
-0
6,35 41,2 ± 0,35
Ø22,187 - 0,052
- 0,03
-0 10 ± 0,35
4
0
- 0,03 4 25 12
- 0,015
- 0,034
25 - 0,052
-0
Ø26
Ø26
Ø26
Ø24
Ø26
± 0,2
- 0,03
25
11,8
11,2 7,9
-0
33,3
Ø21,59
Involute spline SAE Standard
13 teeth - 7/8" -
Delivered with Nut Ref.: K100734 Diametral Pitch 16/32
and lock washer Ref.: K103945 30° Pressure angle
Maxi transmissible torque Maxi transmissible torque Maxi transmissible torque Maxi transmissible torque
530 N.m 290 N.m 390 N.m 70 N.m
Dimensions readings and approximative characteristics subject to modifications.
-0 57 ± 0,35
4,8
- 0,052
- 0,03 5 36
- 0,1
-0
0
Ø24,6
26,5
Ø26
Ø26
Ø26
± 0,2
Ø24g6
14,2
16,5 45 7 46 1,3
+ 0,08
0
Ø24,63 9,7
16 30 3
5/8"-18UNF-2A
± 0,35
-0 22
4,8 - 0,03
- 0,1
0
Ø24,6
Ø26
Ø26
± 0,2
15
14,2
16,5
Ø24,63
8 A
B 130
17 51 51 r 10
51
58
48
- 0,036
- 0,071
24
165
150
97
P2 T1 T2 P1
r 10
4 holes Ø 10,5
1,5 1,5
118 Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
3020 21,1 275 3987 235 235 3000 31,65 63,3 4 3,74 5,6
3025 25,8 275 3987 235 235 3000 38,7 77,4 4,90 4,63 5,6
3031 32,1 275 3987 235 235 3000 48,15 96,3 6,10 5,73 5,6
3040 41,5 275 3987 235 235 3000 62,25 124,5 7,85 7,37 5,7
3050 51,65 250 3625 215 215 3000 77,47 154,9 9,77 9,21 6,9
3060 62,6 225 3262 190 190 2500 93,9 156,5 11,85 11,05 7
3071 73,55 225 3262 190 190 2500 110,32 183,8 13,92 13,08 7
3080 82,95 200 2900 170 170 2200 124,42 182,4 15,59 14,60 7,1
3090 92,95 150 2175 130 130 2000 139,42 185,9 17,47 16,47 7,8
3100 103,9 150 2175 130 130 2000 155,85 207,8 19,40 18,17 8
Min. 10 s
⇒
F.T 30 1323 1/4
P1
P3 Allowable peack pressure.
PSI
bar
P
ØC V: 3.505066 V: 3.505060
3071 3071 1" 1/2 N: 3.500493 3071 1" N: 3.500072
ØF 3080 BSP V: 3.505067 3080 BSP V: 3.505060
effective depth G to 42 35,6 69,8 M8 16 24 52,4 26,2 M8 16 3090 1" 1/2 N: 3.500493 3090 1" 1/4 N: 3.500103
3100 3100 BSP V: 3.505067 3100 BSP V: 3.505061
3020
C D to
(Square) 3040
ØC 3050
28 55 M8 17 18 55 M8 17
3060
4 holes Ø F 3071
Dimensions readings and approximative characteristics subject to modifications.
effective depth G to
3100
3020
B D to 27 51 M10 17 18 40 M8 17
(Italian) 3040
ØC 3050
3060
4 holes Ø F 3071
effective depth G to
3100
1’ 1’
3020
U to
5/16
-12 19
1/16
-12 19
(Threaded 3040 UNF UNF
SAE J 475) 1’ 1’
3050 5/8 5/16
19 19
3060 -12 -12
UNF UNF
Ø F 3071
effective depth G to
3100
3020
Y D to 28 52,4 26,2 M10 17 18 52,4 26,2 M10 17
(ISO 6162) 3040
3050
42 69,8 35,6 M14 17 34 52,4 26,2 M10 17
ØC 3060
E
ØF 3071
effective depth G to
3100
3020
to
X 3040
F.T 30 11323 2/4
(without port)
3050
Only with rear body Type A
3060
3071
to
3100
L A
Standard with ports
75
150
150
112 112
V
Dimensions readings and approximative characteristics subject to modifications.
27 on flats
112
F.T 30 1323 3/4
-0
6,35 41,2 ± 0,35
Ø22,187 - 0,052
- 0,03
-0 10 ± 0,35
4 - 0,03
0
4 25 12
- 0,015
- 0,034
25 - 0,052
-0
Ø26
Ø26
Ø26
Ø24
Ø26
± 0,2
- 0,03
25
11,8
11,2 7,9
-0
33,3
Ø21,59
Involute spline SAE Standard
13 teeth - 7/8" -
Delivered with Nut Ref.: K100734 Diametral Pitch 16/32
and lock washer Ref.: K103945 30° Pressure angle
Maxi transmissible torque Maxi transmissible torque Maxi transmissible torque Maxi transmissible torque
530 N.m 290 N.m 390 N.m 70 N.m
Dimensions readings and approximative characteristics subject to modifications.
-0 57 ± 0,35
4,8 - 0,03
- 0,052
5 36
- 0,1
-0
0
Ø24,6
26,5
Ø26
Ø26
Ø26
± 0,2
Ø24g6
14,2
16,5 45 7 46 1,3
+ 0,08
0
Ø24,63 9,7
66,5 N.m
16 30 3
5/8"-18UNF-2A
± 0,35
-0 22
4,8 - 0,03
- 0,1
0
Ø24,6
Ø26
Ø26
± 0,2
15
14,2
16,5
Ø24,63
Ø 105,96 8 A
B 110
17 51 51 r 10
51
58
48
- 0,036
- 0,071
Ø 105
24
97
P2 T1 T2 P1
r 10
4 holes Ø 10,5
1,5 1,5
118 Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
3020 21,1 275 3987 235 235 3000 31,65 63,3 4 3,74 5,6
3025 25,8 275 3987 235 235 3000 38,7 77,4 4,90 4,63 5,6
3031 32,1 275 3987 235 235 3000 48,15 96,3 6,10 5,73 5,6
3040 41,5 275 3987 235 235 3000 62,25 124,5 7,85 7,37 5,7
3050 51,65 250 3625 215 215 3000 77,47 154,9 9,77 9,21 6,9
3060 62,6 225 3262 190 190 2500 93,9 156,5 11,85 11,05 7
3071 73,55 225 3262 190 190 2500 110,32 183,8 13,92 13,08 7
3080 82,95 200 2900 170 170 2200 124,42 182,4 15,59 14,60 7,1
3090 92,95 150 2175 130 130 2000 139,42 185,9 17,47 16,47 7,8
3100 103,9 150 2175 130 130 2000 155,85 207,8 19,40 18,17 8
Min. 10 s
⇒
F.T 30 1359 1/4
P1
P3 Allowable peack pressure.
PSI
bar
P
ØC V: 3.505066 V: 3.505060
3071 3071 1" 1/2 N: 3.500493 3071 1" N: 3.500072
ØF 3080 BSP V: 3.505067 3080 BSP V: 3.505060
effective depth G to 42 35,6 69,8 M8 16 24 52,4 26,2 M8 16 3090 1" 1/2 N: 3.500493 3090 1" 1/4 N: 3.500103
3100 3100 BSP V: 3.505067 3100 BSP V: 3.505061
3020
C D to
(Square) 3040
ØC 3050
28 55 M8 17 18 55 M8 17
3060
3071
4 holes Ø F
to
Dimensions readings and approximative characteristics subject to modifications.
effective depth G
3100
3020
B D to 27 51 M10 17 18 40 M8 17
(Italian) 3040
ØC 3050
3060
4 holes Ø F 3071
effective depth G to
3100
1’ 1’
3020
U to
5/16
-12 19
1/16
-12 19
(Threaded 3040 UNF UNF
SAE J 475) 1’ 1’
3050 5/8 5/16
19 19
3060 -12 -12
UNF UNF
Ø F 3071
effective depth G to
3100
3020
Y D to 28 52,4 26,2 M10 17 18 52,4 26,2 M10 17
(ISO 6162) 3040
3050
42 69,8 35,6 M14 17 34 52,4 26,2 M10 17
ØC 3060
E
ØF 3071
effective depth G to
3100
3020
to
X 3040
F.T 30 11359 2/4
(without port)
3050
Only with rear body Type A
3060
3071
to
3100
L A
Standard with ports
75
150
150
112 112
V
Dimensions readings and approximative characteristics subject to modifications.
27 on flats
112
F.T 30 1359 3/4
-0
6,35 41,2 ± 0,35
Ø22,187 - 0,052
- 0,03
-0 10 ± 0,35
4 - 0,03
0
4 25 12
- 0,015
- 0,034
25 - 0,052
-0
Ø26
Ø26
Ø26
Ø24
Ø26
± 0,2
- 0,03
25
11,8
11,2 7,9
-0
33,3
Ø21,59
Involute spline SAE Standard
13 teeth - 7/8" -
Delivered with Nut Ref.: K100734 Diametral Pitch 16/32
and lock washer Ref.: K103945 30° Pressure angle
Maxi transmissible torque Maxi transmissible torque Maxi transmissible torque Maxi transmissible torque
530 N.m 290 N.m 390 N.m 70 N.m
Dimensions readings and approximative characteristics subject to modifications.
-0 57 ± 0,35
4,8
- 0,052
- 0,03 5 36
- 0,1
-0
0
Ø24,6
26,5
Ø26
Ø26
Ø26
± 0,2
Ø24g6
14,2
16,5 45 7 46 1,3
+ 0,08
0
Ø24,63 9,7
16 30 3
5/8"-18UNF-2A
± 0,35
-0 22
4,8 - 0,03
- 0,1
0
Ø24,6
Ø26
Ø26
± 0,2
15
14,2
16,5
Ø24,63
48 N.m
F.T 30 1370
F.T 30 1373
F.T 30 1414
F.T 30 1375
Data sheet
PUMP ABR
F.T 30 1376
F.T 30 1371
F.T 30 1374
F.T 30 1377
F.T 30 1378
F.T 30 1372
PUMPS
F.T 30 1306
- 0,05
-0
138
89,8
Ø 101,6
P2 T1 r 7,5 T2 P1
3020 21,1 275 3987 235 235 3000 31,65 63,3 4 3,74 11,3
3025 25,8 275 3987 235 235 3000 38,7 77,4 4,90 4,63 11,3
3031 32,1 275 3987 235 235 3000 48,15 96,3 6,10 5,73 11,3
3040 41,5 275 3987 235 235 3000 62,25 124,5 7,85 7,37 11,4
3050 51,65 250 3625 215 215 3000 77,47 154,9 9,77 9,21 12,6
3060 62,6 225 3262 190 190 2500 93,9 156,5 11,85 11,05 12,7
3071 73,55 225 3262 190 190 2500 110,32 183,8 13,92 13,08 12,7
3080 82,95 200 2900 170 170 2200 124,42 182,4 15,59 14,60 12,8
3090 92,95 150 2175 130 130 2000 139,42 185,9 17,47 16,47 13,5
3100 103,9 150 2175 130 130 2000 155,85 207,8 19,40 18,17 13,7
Min. 10 s
⇒
F.T 30 1370 1/4
P1
P3 Allowable peack pressure.
PSI
bar
P
ØC V: 3.505066 V: 3.505060
3071 3071 1" 1/2 N: 3.500493 3071 1" N: 3.500072
ØF 3080 BSP V: 3.505067 3080 BSP V: 3.505060
effective depth G to 42 35,6 69,8 M8 16 24 52,4 26,2 M8 16 3090 1" 1/2 N: 3.500493 3090 1" 1/4 N: 3.500103
3100 3100 BSP V: 3.505067 3100 BSP V: 3.505061
3020
C D to
(Square) 3040
ØC 3050
28 55 M8 17 18 55 M8 17
3060
4 holes Ø F 3071
Dimensions readings and approximative characteristics subject to modifications.
effective depth G to
3100
3020
B D to 27 51 M10 17 18 40 M8 17
(Italian) 3040
ØC 3050
3060
4 holes Ø F 3071
effective depth G to
3100
1’ 1’
3020
U to
5/16
-12 19
1/16
-12 19
(Threaded 3040 UNF UNF
SAE J 475) 1’ 1’
3050 5/8 5/16
19 19
3060 -12 -12
UNF UNF
Ø F 3071
effective depth G to
3100
3020
Y D to 28 52,4 26,2 M10 17 18 52,4 26,2 M10 17
(ISO 6162) 3040
3050
42 69,8 35,6 M14 17 34 52,4 26,2 M10 17
ØC 3060
E
ØF 3071
effective depth G to
3100
3020
to
X 3040
F.T 30 11370 2/4
(without port)
3050
Only with rear body Type A
3060
3071
to
3100
L A
Standard with ports
75
150
150
112 112
V
Dimensions readings and approximative characteristics subject to modifications.
27 on flats
112
F.T 30 1370 3/4
10 20 30 40
0,027
+ 0,03
6,35 0
0,01
Ø 31,685 ±
F2 F2
28,1±
Ø30
Ø35
0,03
38
38,1 7,9
Ø25,37 ±
47,1 7,9
500 N.m
Dimensions readings and approximative characteristics subject to modifications.
+ 0,03
7,93 0
0,01
Ø22,161 ±
F2
35,17 ±
Ø35
Ø30
0,03
25
47,6 7,9
Ø31,72 ±
33,3 7,9
F1 = 120 daN
F2 = 50 daN
F1 = 140 daN Involute spline to SAE "B"
13 teeth - 7/8"
F2 = 50 daN Diametral Pitch 16/32
30° Pressure angle
+ 0,03
6,35 0
Ø25,371 ±
0,01
F2 F2
Ø30
Ø30
25 ±
0,03
25
Ø22,205 ±
33,3 7,9
38,1 7,9
F.T 30 1370 4/4
Ø 102,4
146
A
B 138
6,35 12 19 89,8
51
- 0,05
-0
138
89,8
Ø 101,6
P2 T1 r 7,5 T2 P1
3020 21,1 275 3987 235 235 3000 31,65 63,3 4 3,74 11,3
3025 25,8 275 3987 235 235 3000 38,7 77,4 4,90 4,63 11,3
3031 32,1 275 3987 235 235 3000 48,15 96,3 6,10 5,73 11,3
3040 41,5 275 3987 235 235 3000 62,25 124,5 7,85 7,37 11,4
3050 51,65 250 3625 215 215 3000 77,47 154,9 9,77 9,21 12,6
3060 62,6 225 3262 190 190 2500 93,9 156,5 11,85 11,05 12,7
3071 73,55 225 3262 190 190 2500 110,32 183,8 13,92 13,08 12,7
3080 82,95 200 2900 170 170 2200 124,42 182,4 15,59 14,60 12,8
3090 92,95 150 2175 130 130 2000 139,42 185,9 17,47 16,47 13,5
3100 103,9 150 2175 130 130 2000 155,85 207,8 19,40 18,17 13,7
Min. 10 s
⇒
F.T 30 1373 1/4
P1
P3 Allowable peack pressure.
PSI
bar
P
ØC V: 3.505066 V: 3.505060
3071 3071 1" 1/2 N: 3.500493 3071 1" N: 3.500072
ØF 3080 BSP V: 3.505067 3080 BSP V: 3.505060
effective depth G to 42 35,6 69,8 M8 16 24 52,4 26,2 M8 16 3090 1" 1/2 N: 3.500493 3090 1" 1/4 N: 3.500103
3100 3100 BSP V: 3.505067 3100 BSP V: 3.505061
3020
C D to
(Square) 3040
ØC 3050
28 55 M8 17 18 55 M8 17
3060
3071
Dimensions readings and approximative characteristics subject to modifications.
4 holes Ø F
to
effective depth G
3100
3020
B D to 27 51 M10 17 18 40 M8 17
(Italian) 3040
ØC 3050
3060
4 holes Ø F 3071
effective depth G to
3100
1’ 1’
3020
U to
5/16
-12 19
1/16
-12 19
(Threaded 3040 UNF UNF
SAE J 475) 1’ 1’
3050 5/8 5/16
19 19
3060 -12 -12
UNF UNF
Ø F 3071
effective depth G to
3100
3020
Y D to 28 52,4 26,2 M10 17 18 52,4 26,2 M10 17
(ISO 6162) 3040
3050
42 69,8 35,6 M14 17 34 52,4 26,2 M10 17
ØC 3060
E
ØF 3071
effective depth G to
3100
3020
to
X 3040
F.T 30 11373 2/4
(without port)
3050
Only with rear body Type A
3060
3071
to
3100
L A
Standard with ports
75
150
150
112 112
V
Dimensions readings and approximative characteristics subject to modifications.
27 on flats
112
F.T 30 1373 3/4
10 20 30 40
0,027
+ 0,03
6,35 0
0,01
Ø 31,685 ±
F2 F2
28,1±
Ø30
Ø35
0,03
38
38,1 7,9
Ø25,37 ±
47,1 7,9
500 N.m
Dimensions readings and approximative characteristics subject to modifications.
+ 0,03
7,93 0
0,01
Ø22,161 ±
F2
35,17 ±
Ø35
Ø30
0,03
25
47,6 7,9
Ø31,72 ±
33,3 7,9
F1 = 120 daN
F2 = 50 daN
F1 = 140 daN Involute spline to SAE "B"
13 teeth - 7/8"
F2 = 50 daN Diametral Pitch 16/32
30° Pressure angle
+ 0,03
6,35 0
Ø25,371 ±
0,01
F2 F2
Ø30
Ø30
25 ±
0,03
25
Ø22,205 ±
33,3 7,9
38,1 7,9
F.T 30 1373 4/4
- 0,05
-0
138
89,8
Ø 101,6
P2 T1 r 7,5 T2 P1
3020 21,1 275 3987 235 235 3000 31,65 63,3 4 3,74 11,3
3025 25,8 275 3987 235 235 3000 38,7 77,4 4,90 4,63 11,3
3031 32,1 275 3987 235 235 3000 48,15 96,3 6,10 5,73 11,3
3040 41,5 275 3987 235 235 3000 62,25 124,5 7,85 7,37 11,4
3050 51,65 250 3625 215 215 3000 77,47 154,9 9,77 9,21 12,6
3060 62,6 225 3262 190 190 2500 93,9 156,5 11,85 11,05 12,7
3071 73,55 225 3262 190 190 2500 110,32 183,8 13,92 13,08 12,7
3080 82,95 200 2900 170 170 2200 124,42 182,4 15,59 14,60 12,8
3090 92,95 150 2175 130 130 2000 139,42 185,9 17,47 16,47 13,5
3100 103,9 150 2175 130 130 2000 155,85 207,8 19,40 18,17 13,7
Min. 10 s
⇒
F.T 30 1414 1/4
P1
P3 Allowable peack pressure.
PSI
bar
P
ØC V: 3.505066 V: 3.505060
3071 3071 1" 1/2 N: 3.500493 3071 1" N: 3.500072
ØF 3080 BSP V: 3.505067 3080 BSP V: 3.505060
effective depth G to 42 35,6 69,8 M8 16 24 52,4 26,2 M8 16 3090 1" 1/2 N: 3.500493 3090 1" 1/4 N: 3.500103
3100 3100 BSP V: 3.505067 3100 BSP V: 3.505061
3020
C D to
(Square) 3040
ØC 3050
28 55 M8 17 18 55 M8 17
3060
4 holes Ø F 3071
Dimensions readings and approximative characteristics subject to modifications.
effective depth G to
3100
3020
B D to 27 51 M10 17 18 40 M8 17
(Italian) 3040
ØC 3050
3060
4 holes Ø F 3071
effective depth G to
3100
1’ 1’
3020
U to
5/16
-12 19
1/16
-12 19
(Threaded 3040 UNF UNF
SAE J 475) 1’ 1’
3050 5/8 5/16
19 19
3060 -12 -12
UNF UNF
Ø F 3071
effective depth G to
3100
3020
Y D to 28 52,4 26,2 M10 17 18 52,4 26,2 M10 17
(ISO 6162) 3040
3050
42 69,8 35,6 M14 17 34 52,4 26,2 M10 17
ØC 3060
E
ØF 3071
effective depth G to
3100
3020
to
X 3040
(without port)
F.T 30 1414 2/4
3050
Only with rear body Type A
3060
3071
to
3100
L A
Standard with ports
75
150
150
112 112
V
Dimensions readings and approximative characteristics subject to modifications.
27 on flats
112
F.T 30 1414 3/4
10 20 30 40
0,027
+ 0,03
6,35 0
0,01
Ø 31,685 ±
F2 F2
28,1±
Ø30
Ø35
0,03
38
38,1 7,9
Ø25,37 ±
47,1 7,9
F1 = 0 daN F1 = 0 daN
F2 = 50 daN F2 = 50 daN
+ 0,03
7,93 0
0,01
Ø22,161 ±
F2
35,17 ±
Ø35
Ø30
0,03
25
47,6 7,9
Ø31,72 ±
33,3 7,9
F1 = 0 daN
F2 = 50 daN
F1 = 0 daN Involute spline to SAE "B"
13 teeth - 7/8"
F2 = 50 daN
Diametral Pitch 16/32
30° Pressure angle
+ 0,03
6,35 0
Ø25,371 ±
0,01
F2 F2
Ø30
Ø30
25 ±
± 0,03
25
33,3 7,9
Ø22,205
38,1 7,9
F.T 30 1414 4/4
F1 = 0 daN F1 = 0 daN
F2 = 50 daN F2 = 50 daN
Involute spline to SAE "BB"
Maxi transmissible torque
15 teeth - 1"
290 N.m Diametral Pitch 16/32
30° Pressure angle
A
Front body
B 130,3
6,35 SAE "A"
12 19 106,3
51
2 holes Ø 11
- 0,03
Ø 82,55 - 0,06
24
150
150
1,5 1,5
118 Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
3020 21,1 275 3987 235 235 3000 31,65 63,3 4 3,74 11,3
3025 25,8 275 3987 235 235 3000 38,7 77,4 4,90 4,63 11,3
3031 32,1 275 3987 235 235 3000 48,15 96,3 6,10 5,73 11,3
3040 41,5 275 3987 235 235 3000 62,25 124,5 7,85 7,37 11,4
3050 51,65 250 3625 215 215 3000 77,47 154,9 9,77 9,21 12,6
3060 62,6 225 3262 190 190 2500 93,9 156,5 11,85 11,05 12,7
3071 73,55 225 3262 190 190 2500 110,32 183,8 13,92 13,08 12,7
3080 82,95 200 2900 170 170 2200 124,42 182,4 15,59 14,60 12,8
3090 92,95 150 2175 130 130 2000 139,42 185,9 17,47 16,47 13,5
3100 103,9 150 2175 130 130 2000 155,85 207,8 19,40 18,17 13,7
Min. 10 s
⇒
F.T 30 1375 1/4
P1
P3 Allowable peack pressure.
PSI
bar
P
ØC V: 3.505066 V: 3.505060
3071 3071 1" 1/2 N: 3.500493 3071 1" N: 3.500072
ØF 3080 BSP V: 3.505067 3080 BSP V: 3.505060
effective depth G to 42 35,6 69,8 M8 16 24 52,4 26,2 M8 16 3090 1" 1/2 N: 3.500493 3090 1" 1/4 N: 3.500103
3100 3100 BSP V: 3.505067 3100 BSP V: 3.505061
3020
C D to
(Square) 3040
ØC 3050
28 55 M8 17 18 55 M8 17
3060
4 holes Ø F 3071
Dimensions readings and approximative characteristics subject to modifications.
effective depth G to
3100
3020
B D to 27 51 M10 17 18 40 M8 17
(Italian) 3040
ØC 3050
3060
4 holes Ø F 3071
effective depth G to
3100
1’ 1’
3020
U to
5/16
-12 19
1/16
-12 19
(Threaded 3040 UNF UNF
SAE J 475) 1’ 1’
3050 5/8 5/16
19 19
3060 -12 -12
UNF UNF
Ø F 3071
effective depth G to
3100
3020
Y D to 28 52,4 26,2 M10 17 18 52,4 26,2 M10 17
(ISO 6162) 3040
3050
42 69,8 35,6 M14 17 34 52,4 26,2 M10 17
ØC 3060
E
ØF 3071
effective depth G to
3100
3020
to
X 3040
F.T 30 11375 2/4
(without port)
3050
Only with rear body Type A
3060
3071
to
3100
L A
Standard with ports
75
150
150
112 112
V
Dimensions readings and approximative characteristics subject to modifications.
27 on flats
112
F.T 30 1375 3/4
10 20 30 40
0,027
+ 0,03
6,35 0
0,01
Ø 31,685 ±
F2 F2
28,1±
Ø30
Ø35
0,03
38
38,1 7,9
Ø25,37 ±
47,1 7,9
+ 0,03
7,93 0
0,01
Ø22,161 ±
F2
35,17 ±
Ø35
Ø30
0,03
25
47,6 7,9
Ø31,72 ±
33,3 7,9
F1 = 120 daN
F2 = 50 daN
F1 = 140 daN Involute spline to SAE "B"
13 teeth - 7/8"
F2 = 50 daN Diametral Pitch 16/32
30° Pressure angle
+ 0,03
6,35 0
Ø25,371 ±
0,01
F2 F2
Ø30
Ø30
25 ±
0,03
25
Ø22,205 ±
33,3 7,9
38,1 7,9
F.T 30 1375 4/4
A
Front body
B 130,3
6,35 SAE "A"
12 19 106,3
51
2 holes Ø 11
- 0,03
Ø 82,55 - 0,06
150
150
r 14
P2 T1 T2 P1
1,5 1,5
118 Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
3020 21,1 275 3987 235 235 3000 31,65 63,3 4 3,74 11,3
3025 25,8 275 3987 235 235 3000 38,7 77,4 4,90 4,63 11,3
3031 32,1 275 3987 235 235 3000 48,15 96,3 6,10 5,73 11,3
3040 41,5 275 3987 235 235 3000 62,25 124,5 7,85 7,37 11,4
3050 51,65 250 3625 215 215 3000 77,47 154,9 9,77 9,21 12,6
3060 62,6 225 3262 190 190 2500 93,9 156,5 11,85 11,05 12,7
3071 73,55 225 3262 190 190 2500 110,32 183,8 13,92 13,08 12,7
3080 82,95 200 2900 170 170 2200 124,42 182,4 15,59 14,60 12,8
3090 92,95 150 2175 130 130 2000 139,42 185,9 17,47 16,47 13,5
3100 103,9 150 2175 130 130 2000 155,85 207,8 19,40 18,17 13,7
Min. 10 s
⇒
F.T 30 1376 1/4
P1
P3 Allowable peack pressure.
PSI
bar
P
ØC V: 3.505066 V: 3.505060
3071 3071 1" 1/2 N: 3.500493 3071 1" N: 3.500072
ØF 3080 BSP V: 3.505067 3080 BSP V: 3.505060
effective depth G to 42 35,6 69,8 M8 16 24 52,4 26,2 M8 16 3090 1" 1/2 N: 3.500493 3090 1" 1/4 N: 3.500103
3100 3100 BSP V: 3.505067 3100 BSP V: 3.505061
3020
C D to
(Square) 3040
ØC 3050
28 55 M8 17 18 55 M8 17
3060
4 holes Ø F 3071
Dimensions readings and approximative characteristics subject to modifications.
effective depth G to
3100
3020
B D to 27 51 M10 17 18 40 M8 17
(Italian) 3040
ØC 3050
3060
4 holes Ø F 3071
effective depth G to
3100
1’ 1’
3020
U to
5/16
-12 19
1/16
-12 19
(Threaded 3040 UNF UNF
SAE J 475) 1’ 1’
3050 5/8 5/16
19 19
3060 -12 -12
UNF UNF
Ø F 3071
effective depth G to
3100
3020
Y D to 28 52,4 26,2 M10 17 18 52,4 26,2 M10 17
(ISO 6162) 3040
3050
42 69,8 35,6 M14 17 34 52,4 26,2 M10 17
ØC 3060
E
ØF 3071
effective depth G to
3100
3020
to
X 3040
F.T 30 11376 2/4
(without port)
3050
Only with rear body Type A
3060
3071
to
3100
L A
Standard with ports
75
150
150
112 112
V
Dimensions readings and approximative characteristics subject to modifications.
27 on flats
112
F.T 30 1376 3/4
10 20 30 40
0,027
+ 0,03
6,35 0
0,01
Ø 31,685 ±
F2 F2
28,1±
Ø30
Ø35
0,03
38
38,1 7,9
Ø25,37 ±
47,1 7,9
+ 0,03
7,93 0
0,01
Ø22,161 ±
F2
35,17 ±
Ø35
Ø30
0,03
25
47,6 7,9
Ø31,72 ±
33,3 7,9
F1 = 120 daN
F2 = 50 daN
F1 = 140 daN Involute spline to SAE "B"
13 teeth - 7/8"
F2 = 50 daN Diametral Pitch 16/32
30° Pressure angle
+ 0,03
6,35 0
Ø25,371 ±
0,01
F2 F2
Ø30
Ø30
25 ±
0,03
25
Ø22,205 ±
33,3 7,9
38,1 7,9
F.T 30 1376 4/4
A
B 146
6,35 12 19
4 holes Ø 14,3
- 0,05
51
P2 T1 T2 P1
r 16
1,5 1,5
118 Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
3020 21,1 275 3987 235 235 3000 31,65 63,3 4 3,74 11,3
3025 25,8 275 3987 235 235 3000 38,7 77,4 4,90 4,63 11,3
3031 32,1 275 3987 235 235 3000 48,15 96,3 6,10 5,73 11,3
3040 41,5 275 3987 235 235 3000 62,25 124,5 7,85 7,37 11,4
3050 51,65 250 3625 215 215 3000 77,47 154,9 9,77 9,21 12,6
3060 62,6 225 3262 190 190 2500 93,9 156,5 11,85 11,05 12,7
3071 73,55 225 3262 190 190 2500 110,32 183,8 13,92 13,08 12,7
3080 82,95 200 2900 170 170 2200 124,42 182,4 15,59 14,60 12,8
3090 92,95 150 2175 130 130 2000 139,42 185,9 17,47 16,47 13,5
3100 103,9 150 2175 130 130 2000 155,85 207,8 19,40 18,17 13,7
Min. 10 s
⇒
F.T 30 1371 1/4
ØC V: 3.505066 V: 3.505060
3071 3071 1" 1/2 N: 3.500493 3071 1" N: 3.500072
ØF 3080 BSP V: 3.505067 3080 BSP V: 3.505060
effective depth G to 42 35,6 69,8 M8 16 24 52,4 26,2 M8 16 3090 1" 1/2 N: 3.500493 3090 1" 1/4 N: 3.500103
3100 3100 BSP V: 3.505067 3100 BSP V: 3.505061
3020
C D to
(Square) 3040
ØC 3050
28 55 M8 17 18 55 M8 17
3060
3071
4 holes Ø F
to
Dimensions readings and approximative characteristics subject to modifications.
effective depth G
3100
3020
B D to 27 51 M10 17 18 40 M8 17
(Italian) 3040
ØC 3050
3060
4 holes Ø F 3071
effective depth G to
3100
1’ 1’
3020
U to
5/16
-12 19
1/16
-12 19
(Threaded 3040 UNF UNF
SAE J 475) 1’ 1’
3050 5/8 5/16
19 19
3060 -12 -12
UNF UNF
Ø F 3071
effective depth G to
3100
3020
Y D to 28 52,4 26,2 M10 17 18 52,4 26,2 M10 17
(ISO 6162) 3040
3050
42 69,8 35,6 M14 17 34 52,4 26,2 M10 17
ØC 3060
E
ØF 3071
effective depth G to
3100
3020
to
X 3040
F.T 30 11371 2/4
(without port)
3050
Only with rear body Type A
3060
3071
to
3100
L A
Standard with ports
75
150
150
112 112
V
Dimensions readings and approximative characteristics subject to modifications.
27 on flats
112
F.T 30 1371 3/4
10 20 30 40
0,027
+ 0,03
6,35 0
0,01
Ø 31,685 ±
F2 F2
28,1±
Ø30
Ø35
0,03
38
38,1 7,9
Ø25,37 ±
47,1 7,9
+ 0,03
7,93 0
0,01
Ø22,161 ±
F2
35,17 ±
Ø35
Ø30
0,03
25
47,6 7,9
Ø31,72 ±
33,3 7,9
F1 = 120 daN
F2 = 50 daN
F1 = 140 daN Involute spline to SAE "B"
13 teeth - 7/8"
F2 = 50 daN Diametral Pitch 16/32
30° Pressure angle
+ 0,03
6,35 0
Ø25,371 ±
0,01
F2 F2
Ø30
Ø30
25 ±
0,03
25
Ø22,205 ±
33,3 7,9
38,1 7,9
F.T 30 1371 4/4
490 N.m
A
B 146
6,35 12 19
4 holes Ø 14,3
- 0,05
51
P2 T1 T2 P1
r 16
1,5 1,5
118 Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
3020 21,1 275 3987 235 235 3000 31,65 63,3 4 3,74 11,3
3025 25,8 275 3987 235 235 3000 38,7 77,4 4,90 4,63 11,3
3031 32,1 275 3987 235 235 3000 48,15 96,3 6,10 5,73 11,3
3040 41,5 275 3987 235 235 3000 62,25 124,5 7,85 7,37 11,4
3050 51,65 250 3625 215 215 3000 77,47 154,9 9,77 9,21 12,6
3060 62,6 225 3262 190 190 2500 93,9 156,5 11,85 11,05 12,7
3071 73,55 225 3262 190 190 2500 110,32 183,8 13,92 13,08 12,7
3080 82,95 200 2900 170 170 2200 124,42 182,4 15,59 14,60 12,8
3090 92,95 150 2175 130 130 2000 139,42 185,9 17,47 16,47 13,5
3100 103,9 150 2175 130 130 2000 155,85 207,8 19,40 18,17 13,7
Min. 10 s
⇒
F.T 30 1374 1/4
P1
P3 Allowable peack pressure.
PSI
bar
P
ØC V: 3.505066 V: 3.505060
3071 3071 1" 1/2 N: 3.500493 3071 1" N: 3.500072
ØF 3080 BSP V: 3.505067 3080 BSP V: 3.505060
effective depth G to 42 35,6 69,8 M8 16 24 52,4 26,2 M8 16 3090 1" 1/2 N: 3.500493 3090 1" 1/4 N: 3.500103
3100 3100 BSP V: 3.505067 3100 BSP V: 3.505061
3020
C D to
(Square) 3040
ØC 3050
28 55 M8 17 18 55 M8 17
3060
4 holes Ø F 3071
Dimensions readings and approximative characteristics subject to modifications.
effective depth G to
3100
3020
B D to 27 51 M10 17 18 40 M8 17
(Italian) 3040
ØC 3050
3060
4 holes Ø F 3071
effective depth G to
3100
1’ 1’
3020
U to
5/16
-12 19
1/16
-12 19
(Threaded 3040 UNF UNF
SAE J 475) 1’ 1’
3050 5/8 5/16
19 19
3060 -12 -12
UNF UNF
Ø F 3071
effective depth G to
3100
3020
Y D to 28 52,4 26,2 M10 17 18 52,4 26,2 M10 17
(ISO 6162) 3040
3050
42 69,8 35,6 M14 17 34 52,4 26,2 M10 17
ØC 3060
E
ØF 3071
effective depth G to
3100
3020
to
X 3040
F.T 30 11374 2/4
(without port)
3050
Only with rear body Type A
3060
3071
to
3100
L A
Standard with ports
75
150
150
112 112
V
Dimensions readings and approximative characteristics subject to modifications.
27 on flats
112
F.T 30 1374 3/4
10 20 30 40
0,027
+ 0,03
6,35 0
0,01
Ø 31,685 ±
F2 F2
28,1±
Ø30
Ø35
0,03
38
38,1 7,9
Ø25,37 ±
47,1 7,9
+ 0,03
7,93 0
0,01
Ø22,161 ±
F2
35,17 ±
Ø35
Ø30
0,03
25
47,6 7,9
Ø31,72 ±
33,3 7,9
F1 = 120 daN
F2 = 50 daN
F1 = 140 daN Involute spline to SAE "B"
13 teeth - 7/8"
F2 = 50 daN Diametral Pitch 16/32
30° Pressure angle
+ 0,03
6,35 0
Ø25,371 ±
0,01
F2 F2
Ø30
Ø30
25 ±
0,03
25
Ø22,205 ±
33,3 7,9
38,1 7,9
F.T 30 1374 4/4
A
B 146
6,35 12 19
4 holes Ø 14,3
- 0,05
51
P2 T1 T2 P1
r 16
1,5 1,5
118 Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
3020 21,1 275 3987 235 235 3000 31,65 63,3 4 3,74 11,3
3025 25,8 275 3987 235 235 3000 38,7 77,4 4,90 4,63 11,3
3031 32,1 275 3987 235 235 3000 48,15 96,3 6,10 5,73 11,3
3040 41,5 275 3987 235 235 3000 62,25 124,5 7,85 7,37 11,4
3050 51,65 250 3625 215 215 3000 77,47 154,9 9,77 9,21 12,6
3060 62,6 225 3262 190 190 2500 93,9 156,5 11,85 11,05 12,7
3071 73,55 225 3262 190 190 2500 110,32 183,8 13,92 13,08 12,7
3080 82,95 200 2900 170 170 2200 124,42 182,4 15,59 14,60 12,8
3090 92,95 150 2175 130 130 2000 139,42 185,9 17,47 16,47 13,5
3100 103,9 150 2175 130 130 2000 155,85 207,8 19,40 18,17 13,7
Min. 10 s
⇒
F.T 30 1377 1/4
P1
P3 Allowable peack pressure.
PSI
bar
P
ØC V: 3.505066 V: 3.505060
3071 3071 1" 1/2 N: 3.500493 3071 1" N: 3.500072
ØF 3080 BSP V: 3.505067 3080 BSP V: 3.505060
effective depth G to 42 35,6 69,8 M8 16 24 52,4 26,2 M8 16 3090 1" 1/2 N: 3.500493 3090 1" 1/4 N: 3.500103
3100 3100 BSP V: 3.505067 3100 BSP V: 3.505061
3020
C D to
(Square) 3040
ØC 3050
28 55 M8 17 18 55 M8 17
3060
3071
4 holes Ø F
Dimensions readings and approximative characteristics subject to modifications.
to
effective depth G
3100
3020
B D to 27 51 M10 17 18 40 M8 17
(Italian) 3040
ØC 3050
3060
4 holes Ø F 3071
effective depth G to
3100
1’ 1’
3020
U to
5/16
-12 19
1/16
-12 19
(Threaded 3040 UNF UNF
SAE J 475) 1’ 1’
3050 5/8 5/16
19 19
3060 -12 -12
UNF UNF
Ø F 3071
effective depth G to
3100
3020
Y D to 28 52,4 26,2 M10 17 18 52,4 26,2 M10 17
(ISO 6162) 3040
3050
42 69,8 35,6 M14 17 34 52,4 26,2 M10 17
ØC 3060
E
ØF 3071
effective depth G to
3100
3020
to
X 3040
F.T 30 11377 2/4
(without port)
3050
Only with rear body Type A
3060
3071
to
3100
L A
Standard with ports
75
150
150
112 112
V
Dimensions readings and approximative characteristics subject to modifications.
27 on flats
112
F.T 30 1377 3/4
10 20 30 40
0,027
+ 0,03
6,35 0
0,01
Ø 31,685 ±
F2
28,1± F2
Ø30
Ø35
0,03
38
38,1 7,9
Ø25,37 ±
47,1 7,9
F1 = 0 daN F1 = 0 daN
F2 = 50 daN F2 = 50 daN
N.m
+ 0,03
7,93 0
0,01
Ø22,161 ±
F2
35,17 ±
Ø35
Ø30
0,03
25
47,6 7,9
Ø31,72 ±
33,3 7,9
F1 = 0 daN
F2 = 50 daN
F1 = 0 daN Involute spline to SAE "B"
13 teeth - 7/8"
F2 = 50 daN
Diametral Pitch 16/32
30° Pressure angle
+ 0,03
6,35 0
Ø25,371 ±
0,01
F2 F2
Ø30
Ø30
25 ±
0,03
25
Ø22,205 ±
33,3 7,9
38,1 7,9
F.T 30 1377 4/4
F1 = 0 daN F1 = 0 daN
F2 = 50 daN F2 = 50 daN
Involute spline to SAE "BB"
Maxi transmissible torque
15 teeth - 1"
290 N.m Diametral Pitch 16/32
30° Pressure angle
146
P2 T1 T2 P1
r 16
1,5 1,5
118 Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
3020 21,1 275 3987 235 235 3000 31,65 63,3 4 3,74 11,3
3025 25,8 275 3987 235 235 3000 38,7 77,4 4,90 4,63 11,3
3031 32,1 275 3987 235 235 3000 48,15 96,3 6,10 5,73 11,3
3040 41,5 275 3987 235 235 3000 62,25 124,5 7,85 7,37 11,4
3050 51,65 250 3625 215 215 3000 77,47 154,9 9,77 9,21 12,6
3060 62,6 225 3262 190 190 2500 93,9 156,5 11,85 11,05 12,7
3071 73,55 225 3262 190 190 2500 110,32 183,8 13,92 13,08 12,7
3080 82,95 200 2900 170 170 2200 124,42 182,4 15,59 14,60 12,8
3090 92,95 150 2175 130 130 2000 139,42 185,9 17,47 16,47 13,5
3100 103,9 150 2175 130 130 2000 155,85 207,8 19,40 18,17 13,7
Min. 10 s
⇒
F.T 30 1378 1/4
P1
P3 Allowable peack pressure.
PSI
bar
P
ØC V: 3.505066 V: 3.505060
3071 3071 1" 1/2 N: 3.500493 3071 1" N: 3.500072
ØF 3080 BSP V: 3.505067 3080 BSP V: 3.505060
effective depth G to 42 35,6 69,8 M8 16 24 52,4 26,2 M8 16 3090 1" 1/2 N: 3.500493 3090 1" 1/4 N: 3.500103
3100 3100 BSP V: 3.505067 3100 BSP V: 3.505061
3020
C D to
(Square) 3040
ØC 3050
28 55 M8 17 18 55 M8 17
3060
4 holes Ø F 3071
Dimensions readings and approximative characteristics subject to modifications.
effective depth G to
3100
3020
B D to 27 51 M10 17 18 40 M8 17
(Italian) 3040
ØC 3050
3060
4 holes Ø F 3071
effective depth G to
3100
1’ 1’
3020
U to
5/16
-12 19
1/16
-12 19
(Threaded 3040 UNF UNF
SAE J 475) 1’ 1’
3050 5/8 5/16
19 19
3060 -12 -12
UNF UNF
Ø F 3071
effective depth G to
3100
3020
Y D to 28 52,4 26,2 M10 17 18 52,4 26,2 M10 17
(ISO 6162) 3040
3050
42 69,8 35,6 M14 17 34 52,4 26,2 M10 17
ØC 3060
E
ØF 3071
effective depth G to
3100
3020
to
X 3040
F.T 30 11378 2/4
(without port)
3050
Only with rear body Type A
3060
3071
to
3100
L A
Standard with ports
75
150
150
112 112
V
Dimensions readings and approximative characteristics subject to modifications.
27 on flats
112
F.T 30 1378 3/4
10 20 30 40
0,027
+ 0,03
6,35 0
0,01
Ø 31,685 ±
F2
28,1± F2
Ø30
Ø35
0,03
38
38,1 7,9
Ø25,37 ±
47,1 7,9
F1 = 0 daN F1 = 0 daN
F2 = 50 daN F2 = 50 daN
N.m
+ 0,03
7,93 0
0,01
Ø22,161 ±
F2
35,17 ±
Ø35
Ø30
0,03
25
47,6 7,9
Ø31,72 ±
33,3 7,9
F1 = 0 daN
F2 = 50 daN
F1 = 0 daN Involute spline to SAE "B"
13 teeth - 7/8"
F2 = 50 daN
Diametral Pitch 16/32
30° Pressure angle
+ 0,03
6,35 0
Ø25,371 ±
0,01
F2 F2
Ø30
Ø30
25 ±
0,03
25
Ø22,205 ±
33,3 7,9
38,1 7,9
F.T 30 1378 4/4
F1 = 0 daN F1 = 0 daN
F2 = 50 daN F2 = 50 daN
Involute spline to SAE "BB"
Maxi transmissible torque
15 teeth - 1"
290 N.m Diametral Pitch 16/32
30° Pressure angle
A
B 98
9 12 23 4 holes Ø 13 80
51
- 0,03
- 0,06
80
98
Ø 80
24
150
P2 T1 T2 P1
r 14
1,5 1,5
118 Direction 1 Direction 2
Dimensions readings and approximative characteristics subject to modifications.
3020 21,1 275 3987 235 235 3000 31,65 63,3 4 3,74 5,6
3025 25,8 275 3987 235 235 3000 38,7 77,4 4,90 4,63 5,6
3031 32,1 275 3987 235 235 3000 48,15 96,3 6,10 5,73 5,6
3040 41,5 275 3987 235 235 3000 62,25 124,5 7,85 7,37 5,7
3050 51,65 250 3625 215 215 3000 77,47 154,9 9,77 9,21 6,9
3060 62,6 225 3262 190 190 2500 93,9 156,5 11,85 11,05 7
3071 73,55 225 3262 190 190 2500 110,32 183,8 13,92 13,08 7
3080 82,95 200 2900 170 170 2200 124,42 182,4 15,59 14,60 7,1
3090 92,95 150 2175 130 130 2000 139,42 185,9 17,47 16,47 7,8
3100 103,9 150 2175 130 130 2000 155,85 207,8 19,40 18,17 8
Min. 10 s
⇒
F.T 30 1372 1/3
P1
P3 Allowable peack pressure.
PSI
bar
P
ØC V: 3.505066 V: 3.505060
3071 3071 1" 1/2 N: 3.500493 3071 1" N: 3.500072
ØF 3080 BSP V: 3.505067 3080 BSP V: 3.505060
effective depth G to 42 35,6 69,8 M8 16 24 52,4 26,2 M8 16 3090 1" 1/2 N: 3.500493 3090 1" 1/4 N: 3.500103
3100 3100 BSP V: 3.505067 3100 BSP V: 3.505061
3020
C D to
(Square) 3040
ØC 3050
28 55 M8 17 18 55 M8 17
3060
3071
Dimensions readings and approximative characteristics subject to modifications.
4 holes Ø F
to
effective depth G
3100
3020
B D to 27 51 M10 17 18 40 M8 17
(Italian) 3040
ØC 3050
3060
4 holes Ø F 3071
effective depth G to
3100
1’ 1’
3020
U to
5/16
-12 19
1/16
-12 19
(Threaded 3040 UNF UNF
SAE J 475) 1’ 1’
3050 5/8 5/16
19 19
3060 -12 -12
UNF UNF
Ø F 3071
effective depth G to
3100
3020
Y D to 28 52,4 26,2 M10 17 18 52,4 26,2 M10 17
(ISO 6162) 3040
3050
42 69,8 35,6 M14 17 34 52,4 26,2 M10 17
ØC 3060
E
ØF 3071
effective depth G to
3100
3020
to
X 3040
F.T 30 11372 2/3
(without port)
3050
Only with rear body Type A
3060
3071
to
3100
L A
Standard with ports
75
150
150
112 112
V
Dimensions readings and approximative characteristics subject to modifications.
27 on flats
112
D04 F
55 ±0,35
42
36,8
Ø 8,15 ±0,05 F1
Parallel spline shaft
Ø39
Ø32,85 ±0,05
8 x 32 x 36 - to Norm NF E 22 141
Ø34,85 ±0,05
F1 = 140 daN
F2 = 50 daN
25,4
11,1
73
Dimensions readings and approximative characteristics subject to modifications.
Flat front Port location Junction body Port location Rear body
body 3/3
Capacity B C D E
A C D C G C E
B B B
51
35
25,4
73
24
104
11,1
150
16,5
Port location Rear body
Series 1
Dimensions readings and approximative characteristics subject to modifications.
Flat front Port location Junction body Port location Junction body
body Series 3 3/2 Series 2 2-2,5 / 1
ATTENTION
Q Capacity in cc / rev Calculation of the torque for one pump body : 1,59 x Q x P
= C ( N.m )
1000 x Rm
P Pressure in bar
Example : P 1 CBN 3060 H A 2008 H A 1004 C L 30 A01 Pressure : 3060 200 bar Speed : 2000 RPM
Rm Mechanical efficiency 2008 150 bar
( see catalogue C10 ) 1004 150 bar
1,59 x 60 x 200
= 21,68 N.m
1000 x 0,88
1,59 x 8 x 150
= 2,24 N.m
1000 x 0,87
1,59 x 4 x 150
= 1,09 N.m
1000 x 0,87
= 25,01 N.m Total torque
F.T 20 1306 3/3
PUMP Series 1
F.T 10 1352
F.T 20 1353
F.T 26 1354
F.T 30 1355
A B
B A
P I
4 II
CJN III
3 II
040III
H II
JII
33 C05 N
III III II
Sign Sign Sign Sign Sign Sign Sign Sign Sign Sign
SHAFT
SEAL
N Nitrile
Dimension readings and approxilative characteristics subject to modifications
V Viton
PUMP P
SHAFT CODE
C24 Series 1
DIRECTION of ROTATION 4
( Explanation see F.T R 0149 ) C05 Series 2 and 2,5
C14 Series 3
33 SPLINNED SHAFT
INTERFACE ( Module ) CJN
J INTERFACE
PORT LOCATION
H Implantation HPI
C Square location
F Threaded ports
Y ISO location (Norm 6162)
S SAE location (Norm J518c)
B Italian location
Series 2 (00)4 - (00)6 - (00)8 - (0)10 - (0)12 - (0) 14 - (0)15 - (0)17 - (0)18 - (0)22 - (0)26 - (0)30
Series 2,5 12 - 15 - 17 - 18 - 22
F.T R 0146
Series 2,6 20 - 25 - 27 - 30 - 35 - 40 - 50
Series 3 (0)20 - (0)25 - (0)31 - (0)40 - (0)50 - (0)60 - (0)71 - (0)80 - (0)90 - 100
Prefix(s) 0 - Only for conformity of the Codification
Series 1 Series 1
«MODULE 3» SERIES 1
K102837 K102837
COMPACT
Rear body (Code L) K107778
20
11
12 Y 12 Y 7
A C 11
B
Dimensions readings and approximative characteristics subject to modifications.
MODULE 3
37 Rear body (Code L) K107778
20 9 Y 9 9 Y 9 Y 7
X X
Driving shaft
33 C24
Involute spline to shaft
10 x 18 x 0,5
to Norm NF E 22 141 - BNA 455
FIXING SCREWS
F.T 10 1352 1/3
P II
Sign CJ N 1 VI
Sign C L 3 3 C2 4 XII
Sign
C 2 holes Ø 6,02 - 0
+0,01
41±0,01
41±0,01
51
36
130 ±0,03
130 ±0,03
150
120
P2 T2 T1 P1
B A
r8
9 Y 9 4 holes Ø 8,3 50
+0,01
2 holes Ø 6,02 - 0 X 100
Direction 2 effective depth 6,5
Drive on Face B Direction 1
A
Dimensions readings and approximative characteristics subject to modifications.
Dive on Face
Viton: K5074105
F 1001
to
3/8"
11
3/8"
12
F.T 10 1352 2/3
DRIVING SHAFT
10 20 30 40
C24
F
9 ±0,25
- 0,05
0
Ø12
Ø9,9
2
10
25 N.m
F.T 10 1352 3/3
Series 2 - 2,5
COMPACT
20 20,5 37
Junction body «Compact» Junction body «Compact» Junction body «Compact» Junction body «Compact» Junction body «Compact» Rear body (Code L)
107 863 (Code D) 107 892 (Code A) 107 863 (Code D) 107 892 (Code A) 104 673 et 104 674 (Code E) 106 469 (Code E) K106 469 (Code D ou Code A) K107 778
Series 2 - 2,5
MODULE 3
Dimensions readings and approximative characteristics subject to modifications.
Rear cover
Z5072814
P II
Sign CJ N 2 VI
Sign H L 3 3 C0 5 XII
Sign
+0,01
2 holes Ø 6,02 - 0 C
effective depth 6,5 100
= =
50
r8
±0,01
41±0,01
51
16,5
36
41
±0,03
130 ±0,03
120
B A
150
130
P2 T2 T1 P1
Direction2 Direction1
Drive on Face B Drive on Face A
Dimensions readings and approximative characteristics subject to modifications.
Viton: K5074066
2004 - 2006 - 2008 (For manufacture to
47 70 87
2010 - 2012 since December 1993)
2014 - 2015 - 2017
2018 - 2022 61,6 84,6 101,6
2512
2026 - 2030 -
2515 - 2517 - 2518 77,7 100,7 117,7
2522 Consult us for availability
10 20 30 40
C05
9,5 N.m
H D
2004
to 20 17,4 38 M6 12 15 17,4 38 M6 15
1 / 2 " BSP
N: 2.500055
3 / 8 " BSP
N: 2.500054
(HPI)
2012 V: 2.504126 V: 2.505994
2014
to
E
F 2004
to
3/4"
16
3/8"
12
(Threaded) BSP BSP
2012
2014 to
ØF 2030
effective depth G 1" 1/2"
2512 18 14
BSP BSP
to
2522
1"1/16
U 2004 7/8"
12 14
to UNF
20 17
UNF
(Threaded 2012 2B 2B
SAE J 475)
2014 to 1"5/16 7/8"
12 14
2022 20 17
UNF UNF
2512 2B 2B
ØF 2026-2030 1"5/16 1"1/16
12 12
effective depth G 2515 to UNF
20 20
UNF
2522 2B 2B
2004
Y D
to 20 17,4 38 M8 14 15 17,4 38 M8 14
(ISO 6162) 2012
2014 to
2022 26 47,6 22,4 M10 14 15 17,4 38 M8 14
2512
E
F.T 20 1353 3/3
ØC
ØF 2026-2030
effective depth G 26 52,4 26,2 M10 14 15 17,4 38 M8 14
2515 to
2522
Series 2,6
Series 2,6
A C 16
Series 2,6 Series 2 - 2,5
B
K114301 K114315
MODULE 3
23,4
P 4 CJ N 2 6 VI
Sign Y L 3 3 C2 5 XII
Sign
C
116 = = 100
r8
±0,01
51
36
41
±0,03
150
120
130
P2 T2 T1 P1
B A
r8
+0,01 4 holes Ø 8,5
2 holes Ø 6,02 - 0 9 Y 9
effective depth 6,5 X
Direction 2 1
Direction
Drive on Face B Drive on Face A
Dimensions readings and approximative characteristics subject to modifications.
Viton: K5093204
2620 74,1 100,2 118,2 (For manufacture to
2625 78,6 104,7 122,7 since 2002)
2627 82 108,1 126,1
2630 85,1 111,2 129,2
2635 89,1 115,2 133,2
2640 94,6 120,7 138,7
2650
Consult us for availability
2620
F bis
2627
1"
BSP
19
(Threaded)
2630 1"
3/4"
- 1/4 21
BSP 16
2635 BSP
Ø F 1"
effective depth G 2640 1/4 21
BSP
2620
Y D
bis 25 52,4 26,2 M8 14
1" BSP
N: 368557.002
F.T 26 1354 2/3
(ISO 6162)
2627
2630 1" BSP
- 30 58,7 30,2 M10 14 22 52,4 26,2 M10 14 N: 368557.002
ØC 2635
E
10 20 30 40
C25
F
12 9 ±0,3
Ø 19,75 ±0,05
Involute spline shaft
20 x 18 x 1
to Norm NF E 22 141
25 N.m
F.T 26 1354 3/3
A C 16
B
Series 3
Series 3 Series 2,6 Series 2 - 2,5 Series 1
47 42 42
F
Rear cover
A C 16 Z5072814
B
25 9 Y 9 8,5 Y 8,5 9 Y 9
Dimensions readings and approximative characteristics subject to modifications.
X X X
P 4 CJ N 3 VI
Sign H L 3 3 C1 4 XII
Sign
C
116 = = 100
51
36
150
120
P2 B T2 T1 P1
A
9 Y 9 4 holes Ø 8,3
X
2
Direction 1
Direction
Drive on Face B Drive on Face A
Dimensions readings and approximative characteristics subject to modifications.
3071 - 3080 - 3090 - 3100 119,2 151,2 169,2 since January 1993)
10 20 30 40
C14
15 9 ±0,35
3
Ø 26
Ø 24,6 - 0,01
0
25 x 13 x 1,667
to Norm NF E 22 141 - BNA 455
500 N.m
V: 3.505066 V: 3.505060
3071 1" 1/2 N: 3.500493 3071 1" N: 3.500072
ØF 3071 3080 BSP V: 3.505067 3080 BSP V: 3.505060
effective depth G to 42 35,6 69,8 M8 16 24 52,4 26,2 M8 16 3090 1" 1/2 N: 3.500493 3090 1" 1/4 N: 3.500103
3100 3100 BSP V: 3.505067 3100 BSP V: 3.505061
3020
C D to
(Square) 3040
ØC 3050
Dimensions readings and approximative characteristics subject to modifications.
28 55 M8 17 18 55 M8 17
3060
4 holes Ø F 3071
effective depth G to
3100
3020
B D to 27 51 M10 17 18 40 M8 17
(Italian) 3040
ØC 3050
3060
4 holes Ø F 3071
effective depth G to
3100
1’ 1’
3020
U to
5/16
-12 19
1/16
-12 19
(Threaded 3040 UNF UNF
SAE J 475) 1’ 1’
3050 5/8 5/16
19 19
3060 -12 -12
UNF UNF
Ø F 3071
effective depth G to
3100
3020
Y D to 28 52,4 26,2 M10 17 18 52,4 26,2 M10 17
(ISO 6162) 3040
3050
42 69,8 35,6 M14 17 34 52,4 26,2 M10 17
ØC 3060
E
ØF 3071
effective depth G to
3100
F.T 30 1355 3/3
F.T 50 1364
- FLAT FRONT BODY
F.T 50 1365
F.T 50 1408
Data sheet
PUMP AAR
F.T 50 1407
5043 43,06 300 4350 255 3700 3000 64,59 129 8,44 80,55 14,2
5052 52,91 300 4350 255 3700 3000 79,36 158,5 10,37 98,97 14,2
5062 62,75 300 4350 255 3700 3000 94,12 188 12,30 117,38 14,4
5072 72,59 300 4350 255 3700 3000 108,88 217,5 14,23 135,79 14,6
5083 83,67 280 4060 240 3480 2700 125,50 226 16,41 156,51 15,1
5093 93,51 250 3625 210 3045 2700 140,26 252,5 18,34 174,92 15,2
5103 103,3 250 3625 210 3045 2700 154,95 279 20,25 193,23 15,2
The pump can only run in one way rotation (Precise the direction of rotation on order).
The working cycles hereunder are possible with hydraulic mineral oil for viscosities between 12 and
150 cSt (65,2 and 700 SUS).
The minimum viscosity of 12 cSt (65,2 SUS) is available for a maximum temperature in the hydraulic circuit .
Working temperature: - 20 °C (4 °F) to + 80 °C (176 °F) (140 °C (284 °F) with Viton shaft seal).
Full flow filtration: 10 to 15 microns at the pressure port of the pump or on the return circuit.
Filtration on the suction side: 125 microns.
Pressure at the inlet of the pump:
- Minimum 0,7 bar absolute (Maxi depressure 300 millibar with regard to the air pressure).
- Maximum 2 bar absolute or 1 bar over the air pressure.
The hereabove characteristics concern the pumps driven by elastic couplings perfectly aligned without any
external radial or axial force.
For any other coupling, see technical data sheet F.T R 0009.
For use at maximum working conditions and/or intensive cycles, thanks to consult our technical sales
service for validation.
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
bar
PSI
P
Front body: A
BAN 34 A C E
B
66,5
Port location (capacity): B C
5043 - 5052 - 5062 - 5072 54,7 109,7
5083 - 5093 - 5103 - 61 122,2
29
5125 - 5140 - 5153 - 71,6 143,2
191
Rear body: E
L 35
Dimensions readings and approximative characteristics subject to modifications.
Front bodies: A A C E
AAP / AAR
B
ADP 85
66,5
Rear body: E
L 35
Thick Port location Rear body
front body
F.T 35 1364 2/5
P 5
II III IV VI VII VIII IX X XI XII
Sign Sign Sign Sign Sign Sign Sign Sign Sign Sign
5153
THICK
FRONT AAP / AAR
BODIES
5043
X
5052
X
5062
5072
5083
5093
ADP
5103
5125
5140 20 A05 30 A04
X X 5153
LEGENDES
P2 = Anti clockwise
AA* / AD*= Fixing SAE and ISO
FRONT BODIES
66,5
72
49,3
146
149,3
200
191
(x2) Ø14
(x4) Ø14,3
158 150
(x4) Ø11
- 0,03 -0 -0
Centering: Ø 60,3 - 0,06 Centering: Ø 101,6 - 0,05 Centering: Ø 127 - 0,05
Thickness: 8 Thickness: 6 Thickness: 6
BAN : F.T 35 1365 AAP : F.T 35 1408 ADP : F.T 35 1416
Dimensions readings and approximative characteristics subject to modifications.
H D
5043
5052
V: 3.550397
1" 1/2 BSP
V: 3.550392
1" BSP
(HPI) to 55 50,8 89 M14 25 38 35,6 69,8 M14 25 N: 3.550027 N: 3.550023
5072 5062 V: 3.550398 V: 3.550393
1" 1/2 BSP 1" BSP
5072 N: 3.550027 N: 3.550023
E
V: 3.550398 V: 3.550393
ØC 1" 1/2 BSP 1" BSP
5083 N: 3.550027 N: 3.550023
V: 3.550398 V: 3.550393
1" 1/2 BSP 1" 1/4 BSP
5093 N: 3.550027 N: 3.550026
5083 5103 V: 3.550398 V: 3.550397
to 65 50,8 89 M14 25 38 35,6 69,8 M14 25 2" BSP 1" 1/4 BSP
ØF 5153 5125 N: 3.550028 N: 3.550026
effective depth G 5140 V: 3.5510399 V: 3.550397
2" 1/2 BSP 1" 1/4 BSP
5153 N: 3.550034 N: 3.550026
V: 3.550400 V: 3.550397
F.T 35 1364 4/5
REAR BODY
L Standard
35
66,5
191
158
DRIVING SHAFTS
10 20 30 40
58
F F
± 0,35 55 ±0,35
16 34 8 70 ± 0,35
35
0
-0 8
Ø31,712 - 0,054
5/8" 18UNF-2A
- 0,036
4,78 - 0,009 F1
0
8 45
F2
31 - 0,2
Ø 35
-0
Ø30
Ø30
15 - 0,2
-0
16,5
- 0,007
- 0,029
60 10 38
Ø 24,63 7,9
47,1
Ø28
30
F1
+0,03
7,93 0
22,1± 0,1
F2
Ø35
- 0,06
0
Ø31,75
47,6 7,9
F1 = 150 daN
F2 = 50 daN
F.T 35 1364 5/5
430 N.m
A
B 150
8 24 57,15 57,15 Direction 1
66,5
- 0,03
- 0,06
72
49,3
P2 T1
Ø 60,3
T2 P1
29
100
138
Direction 2
1 1
160 r 16 4 holes Ø 11
Nitrile: K5502240
5043 43,06 300 4350 255 3700 3000 64,59 129 8,44 80,55 13,4
5052 52,91 300 4350 255 3700 3000 79,36 158,5 10,37 98,97 13,4
5062 62,75 300 4350 255 3700 3000 94,12 188 12,30 117,38 13,6
5072 72,59 300 4350 255 3700 3000 108,88 217,5 14,23 135,79 13,8
5083 83,67 280 4060 240 3480 2700 125,50 226 16,41 156,51 14,3
5093 93,51 250 3625 210 3045 2700 140,26 252,5 18,34 174,92 14,4
5103 103,3 250 3625 210 3045 2700 154,95 279 20,25 193,23 14,4
5125 125,5 250 3625 210 3045 2600 188,25 326 24,61 234,76 14,9
5140 140,2 250 3625 210 3045 2500 210,30 350,5 27,49 262,26 14,9
5153 153 250 3625 210 3045 2400 229,50 367,5 30 286,20 15,2
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum pressure ⇒ P3
F.T 35 1365 1/2
P1
P3 Allowable peack pressure.
PSI
bar
P
H D
5043
5043 N: 3.550026
V: 3.550397
1" 1/2 BSP
N: 3.550022
V: 3.550392
1" BSP
(HPI)
to 55 50,8 89 M14 25 38 35,6 69,8 M14 25 5052 N: 3.550027 N: 3.550023
5072 5062 V: 3.550398 V: 3.550393
1" 1/2 BSP 1" BSP
5072 N: 3.550027 N: 3.550023
E
ØC V: 3.550398 V: 3.550393
1" 1/2 BSP 1" BSP
5083 N: 3.550027 N: 3.550023
V: 3.550398 V: 3.550393
1" 1/2 BSP 1" 1/4 Gaz
5093 N: 3.550027 N: 3.550026
5083 5103 V: 3.550398 V: 3.550397
ØF to 65 50,8 89 M14 25 38 35,6 69,8 M14 25 2" BSP 1" 1/4 BSP
5153 5125
effective depth G N: 3.550028 N: 3.550026
5140 V: 3.5510399 V: 3.550397
2" 1/2 BSP 1" 1/4 BSP
5153 N: 3.550034 N: 3.550026
V: 3.550400 V: 3.550397
REAR BODY
L Standard
35
66,5
Dimensions readings and approximative characteristics subject to modifications.
191
158
-0
4,78 - 0,03 8 45
31 - 0,2
-0
Ø30
Ø30
15 - 0,02
-0
16,5 60 10
- 0,007
- 0,020
Ø24,63
Ø28
F.T 35 1365 2/2
A
174
B
146
6 15 40
Front body Ø 120
SAE "B" Direction 1
66,5
r 14
- 0,05
-0
P2 T1 T2 P1
Ø 101,6
29
Direction 2 2 holes Ø 14
1 1
160
september 1981)
125 - 140 - 153 263,2 156,5
5043 43,06 300 4350 255 3700 3000 64,59 129 8,44 80,55 14,2
5052 52,91 300 4350 255 3700 3000 79,36 158,5 10,37 98,97 14,2
5062 62,75 300 4350 255 3700 3000 94,12 188 12,30 117,38 14,4
5072 72,59 300 4350 255 3700 3000 108,88 217,5 14,23 135,79 14,6
5083 83,67 280 4060 240 3480 2700 125,50 226 16,41 156,51 15,1
5093 93,51 250 3625 210 3045 2700 140,26 252,5 18,34 174,92 15,2
5103 103,3 250 3625 210 3045 2700 154,95 279 20,25 193,23 15,2
5125 125,5 250 3625 210 3045 2600 188,25 326 24,61 234,76 15,7
5140 140,2 250 3625 210 3045 2500 210,30 350,5 27,49 262,26 15,7
5153 153 250 3625 210 3045 2400 229,50 367,5 30 286,20 16
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum pressure ⇒ P3
F.T 35 1408 1/2
P1
P3 Allowable peack pressure.
bar
PSI
P
H D
5043
5043 N: 3.550026
V: 3.550397
1" 1/2 BSP
N: 3.550022
V: 3.550392
1" BSP
(HPI)
to 55 50,8 89 M14 25 38 35,6 69,8 M14 25 5052 N: 3.550027 N: 3.550023
5072 5062 V: 3.550398 V: 3.550393
1" 1/2 BSP 1" BSP
5072 N: 3.550027 N: 3.550023
E
ØC V: 3.550398 V: 3.550393
1" 1/2 BSP 1" BSP
5083 N: 3.550027 N: 3.550023
V: 3.550398 V: 3.550393
1" 1/2 BSP 1" 1/4 Gaz
5093 N: 3.550027 N: 3.550026
5083 5103 V: 3.550398 V: 3.550397
ØF to 65 50,8 89 M14 25 38 35,6 69,8 M14 25 2" BSP 1" 1/4 BSP
5153 5125
effective depth G N: 3.550028 N: 3.550026
5140 V: 3.5510399 V: 3.550397
2" 1/2 BSP 1" 1/4 BSP
5153 N: 3.550034 N: 3.550026
V: 3.550400 V: 3.550397
REAR BODY
35
66,5
L Standard
191
Dimensions readings and approximative characteristics subject to modifications.
158
10 20 30 40
A05 A04 F
F
55,5 ± 0,55
55 ±0,35
30
F1 35
+0,03
7,93
Ø31,712 - 0,054
0
F1
0
± 0,1
22,1
F2 F2
Ø35
Ø 35
Ø31,75- 0,06
0
38
47,6 7,9 47,1 7,9
690 N.m
r 14
- 0,05
-0
P2 T1 T2 P1
Ø 101,6
Direction 2 2 holes Ø 14
1 1
160
A B
Nitrile: K5501200 + K5502240
september 1981)
125 - 140 - 153 263,2 156,5
5043 43,06 300 4350 255 3700 3000 64,59 129 8,44 80,55 14,2
5052 52,91 300 4350 255 3700 3000 79,36 158,5 10,37 98,97 14,2
5062 62,75 300 4350 255 3700 3000 94,12 188 12,30 117,38 14,4
5072 72,59 300 4350 255 3700 3000 108,88 217,5 14,23 135,79 14,6
5083 83,67 280 4060 240 3480 2700 125,50 226 16,41 156,51 15,1
5093 93,51 250 3625 210 3045 2700 140,26 252,5 18,34 174,92 15,2
5103 103,3 250 3625 210 3045 2700 154,95 279 20,25 193,23 15,2
5125 125,5 250 3625 210 3045 2600 188,25 326 24,61 234,76 15,7
5140 140,2 250 3625 210 3045 2500 210,30 350,5 27,49 262,26 15,7
5153 153 250 3625 210 3045 2400 229,50 367,5 30 286,20 16
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum pressure ⇒ P3
F.T 35 1416 1/2
P1
P3 Allowable peack pressure.
bar
PSI
P
H D
5043
5043 N: 3.550026
V: 3.550397
1" 1/2 BSP
N: 3.550022
V: 3.550392
1" BSP
(HPI)
to 55 50,8 89 M14 25 38 35,6 69,8 M14 25 5052 N: 3.550027 N: 3.550023
5072 5062 V: 3.550398 V: 3.550393
1" 1/2 BSP 1" BSP
5072 N: 3.550027 N: 3.550023
E
ØC V: 3.550398 V: 3.550393
1" 1/2 BSP 1" BSP
5083 N: 3.550027 N: 3.550023
V: 3.550398 V: 3.550393
1" 1/2 BSP 1" 1/4 Gaz
5093 N: 3.550027 N: 3.550026
5083 5103 V: 3.550398 V: 3.550397
ØF to 65 50,8 89 M14 25 38 35,6 69,8 M14 25 2" BSP 1" 1/4 BSP
5153 5125
effective depth G N: 3.550028 N: 3.550026
5140 V: 3.5510399 V: 3.550397
2" 1/2 BSP 1" 1/4 BSP
5153 N: 3.550034 N: 3.550026
V: 3.550400 V: 3.550397
REAR BODY
35
66,5
L Standard
191
Dimensions readings and approximative characteristics subject to modifications.
158
10 20 30 40
A05 A04 F
F
55,5 ± 0,55
55 ±0,35
30
F1 35
+0,03
7,93
Ø31,712 - 0,054
0
F1
0
± 0,1
22,1
F2 F2
Ø35
Ø 35
Ø31,75- 0,06
0
38
47,6 7,9 47,1 7,9
690 N.m
A
B r 16 146
6 15 40 Ø 161,9 Direction 1
66,5
- 0,05
P2 T1
-0
146
T2 P1
Ø 127
29
Direction 2 4 holes
Ø 14,3
1 1 158
160
september 1981)
125 - 140 - 153 263,2 156,5
5043 43,06 300 4350 255 3700 3000 64,59 129 8,44 80,55 14,2
5052 52,91 300 4350 255 3700 3000 79,36 158,5 10,37 98,97 14,2
5062 62,75 300 4350 255 3700 3000 94,12 188 12,30 117,38 14,4
5072 72,59 300 4350 255 3700 3000 108,88 217,5 14,23 135,79 14,6
5083 83,67 280 4060 240 3480 2700 125,50 226 16,41 156,51 15,1
5093 93,51 250 3625 210 3045 2700 140,26 252,5 18,34 174,92 15,2
5103 103,3 250 3625 210 3045 2700 154,95 279 20,25 193,23 15,2
5125 125,5 250 3625 210 3045 2600 188,25 326 24,61 234,76 15,7
5140 140,2 250 3625 210 3045 2500 210,30 350,5 27,49 262,26 15,7
5153 153 250 3625 210 3045 2400 229,50 367,5 30 286,20 16
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum pressure ⇒ P3
P1 = 0,75 x P3
F.T 35 1407 1/2
P1
P3 Allowable peack pressure.
bar
PSI
P
H D
5043
5043 N: 3.550026
V: 3.550397
1" 1/2 BSP
N: 3.550022
V: 3.550392
1" BSP
(HPI)
to 55 50,8 89 M14 25 38 35,6 69,8 M14 25 5052 N: 3.550027 N: 3.550023
5072 5062 V: 3.550398 V: 3.550393
1" 1/2 BSP 1" BSP
5072 N: 3.550027 N: 3.550023
E
ØC V: 3.550398 V: 3.550393
1" 1/2 BSP 1" BSP
5083 N: 3.550027 N: 3.550023
V: 3.550398 V: 3.550393
1" 1/2 BSP 1" 1/4 Gaz
5093 N: 3.550027 N: 3.550026
5083 5103 V: 3.550398 V: 3.550397
ØF to 65 50,8 89 M14 25 38 35,6 69,8 M14 25 2" BSP 1" 1/4 BSP
5153 5125
effective depth G N: 3.550028 N: 3.550026
5140 V: 3.5510399 V: 3.550397
2" 1/2 BSP 1" 1/4 BSP
5153 N: 3.550034 N: 3.550026
V: 3.550400 V: 3.550397
REAR BODY
35
66,5
L Standard
191
Dimensions readings and approximative characteristics subject to modifications.
158
10 20 30 40
A05 A04 F
F
55,5 ± 0,55
55 ±0,35
30
F1 35
+0,03
7,93
Ø31,712 - 0,054
0
F1
0
± 0,1
22,1
F2 F2
Ø35
Ø 35
Ø31,75- 0,06
0
38
47,6 7,9 47,1 7,9
690 N.m
F.T 40 1416
F.T 40 1419
Data sheet
PUMP ADP
F.T 40 1418
4075 075 200 2900 170 2465 2500 112,5 187,5 19,37 141 17
4110 110 200 2900 170 2465 2500 165 275 28,42 206 17,2
4150 150 200 2900 170 2465 2500 225 375 28,60 281 17,4
4175 175 175 2625 150 2175 2500 262,5 437,5 34,31 327,35 19
4212 212 150 2175 130 1885 2500 318 530 41,57 396,56 19,4
4250 250 125 1812 105 1522 2000 375 500 49,02 467,65 20
The pump can only run in one way rotation (Precise the direction of rotation on order).
The working cycles hereunder are possible with hydraulic mineral oil for viscosities between 12 and
150 cSt (65,2 and 700 SUS).
The minimum viscosity of 12 cSt (65,2 SUS) is available for a maximum temperature in the hydraulic circuit .
The hereabove characteristics concern the pumps driven by elastic couplings perfectly aligned without any
external radial or axial force.
For any other coupling, see technical data sheet F.T R 0009.
For use at maximum working conditions and/or intensive cycles, thanks to consult our technical sales
service for validation.
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
P1
P3 Allowable peack pressure.
bar
PSI
P
A C E
B
Front body: A
70,4
CBN / CBK 30
Rear body: E
F.T 40 1417 1/4
L 34
A C E
B
Front body: A
70,4
ADP 103
34,6
210
4075 - 4110 - 4150 55,5 111
4175 - 4212 - 4250 69,5 139,2
Rear body: E
L 34
P 4
II III IV VI VII VIII IX X XI XII
Sign Sign Sign Sign Sign Sign Sign Sign Sign Sign
FLAT CBN
FRONT
BODY
4075
4110
4150
X X 4175
4212
4250 20 C06 30 C06
THICK ADP
FRONT
4075
BODY
4110
4150
4175
X X
4212
4250 30 A07
LEGENDES
F.T 40 1417 2/4
FRONT BODIES
77
43,2
146
150
220
Flansch SAE Typ C
(x4) Ø13
- 0,03 -0
Centering: Ø 80 - 0,06 Centering: Ø 127 - 0,05
H Capacity
INLET
(T)
OUTLET
(P)
CATALOGUE N° 70
Ref. of RECOMMANDED FLANGES
(HPI)
(for speed 1500 rev / min)
ØC D E ØF G ØC D E ØF G INLET (T) OUTLET (P)
1" 1/4 BSP 1" BSP
D
4075 N: 4.500438 N: 4.500437
V: 4.505071 V: 4.505070
4075 1" 1/2 BSP 1" 1/4 BSP
to 60 77,8 42,6 M12 45 40 77,8 42,9 M12 22 4110 N: 4.500439 N: 4.500438
4150 V: 4.504871 V: 4.505071
2" BSP 1" 1/2 BSP
4150 N: 4.500440 N: 4.500439
E
ØC V: 4.505072 V: 4.504871
2" BSP 1" 1/2 BSP
4175 N: 4.500440 N: 4.500439
V: 4.505072 V: 4.504871
4175 2" 1/2 BSP 1" 1/2 BSP
to 70 89 50,8 M12 45 38 77,8 42,9 M12 22 4212 N: 4.500443 N: 4.500439
4250 V: 4.505074 V: 4.504871
ØF 2" 1/2 BSP 2" BSP
effective depth G 4250 N: 4.500443 N: 4.500440
V: 4.505074 V: 4.505072
CORPS ARRIERE
L
Standard
34
70,4
F.T 40 1417 3/4
210
DRIVING SHAFTS
10 20 30 40
C06 C06
91 ± 0,4 F F
8 63
0
8 - 0,036 80 ± 0,4
- 0,01
35 - 0,2
0
-0
Ø 35
Ø 35
Ø 29,5
- 0,009
- 0,025
80 11 50
68 12
Ø 32
140 N.m
A07
55 ±0,4
35
- 0,054
F1
0
Ø 31,712
F2
Ø 50
38
47,1 7,9
F1 = 280 daN
F2 = 100 daN
Involute spline to SAE
Standard - 14 teeth 1” 1/4 -
Pitch 16/32 - Flat root
30° Pressure angle
700 N.m
F.T 40 1417 4/4
A
B 150 ±0,1
10 23 75
r15
77
70,4
±0,1
- 0,030
0,060
34,6
150 ±0,1
210
220
P2 T1 T2 P1
4 holes Ø13
1
160
1 Direction 2 Direction 1
Dimensions readings and approximative characteristics subject to modifications.
from 1978)
4075 075 200 2900 170 2465 2500 112,5 187,5 19,37 141 17
4110 110 200 2900 170 2465 2500 165 275 28,42 206 17,2
4150 150 200 2900 170 2465 2500 225 375 28,60 281 17,4
4175 175 175 2625 150 2175 2500 262,5 437,5 34,31 327,35 19
4212 212 150 2175 130 1885 2500 318 530 41,57 396,56 19,4
4250 250 125 1812 105 1522 2000 375 500 49,02 467,65 20
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
F.T 40 1416 1/2
P1
P3 Allowable peack pressure.
bar
PSI
P
H Capacity
INLET
(T)
OUTLET
(P)
CATALOGUE N° 70
Ref. of RECOMMANDED FLANGES
(HPI)
(for speed 1500 rev / min)
ØC D E ØF G ØC D E ØF G INLET (T) OUTLET (P)
1" 1/4 BSP 1" BSP
D
4075 N: 4.500438 N: 4.500437
V: 4.505071 V: 4.505070
4075 1" 1/2 BSP 1" 1/4 BSP
to 60 77,8 42,6 M12 45 40 77,8 42,9 M12 22 4110 N: 4.500439 N: 4.500438
4150 V: 4.504871 V: 4.505071
2" BSP 1" 1/2 BSP
4150 N: 4.500440 N: 4.500439
E
ØC V: 4.505072 V: 4.504871
2" BSP 1" 1/2 BSP
4175 N: 4.500440 N: 4.500439
V: 4.505072 V: 4.504871
4175 2" 1/2 BSP 1" 1/2 BSP
to 70 89 50,8 M12 45 38 77,8 42,9 M12 22 4212 N: 4.500443 N: 4.500439
4250 V: 4.505074 V: 4.504871
ØF 2" 1/2 BSP 2" BSP
effective depth G 4250 N: 4.500443 N: 4.500440
V: 4.505074 V: 4.505072
REAR BODY
L
Standard
Dimensions readings and approximative characteristics subject to modifications.
34
70,4
210
158
DRIVING SHAFTS
10 20 30 40
A07
F
55 ±0,4
35
- 0,054
F1
0
Ø 31,712
F2
Ø 50
38
47,1 7,9
F.T 40 1416 2/2
F1 = 280 daN
F2 = 100 daN
Involute spline to SAE
Standard - 14 teeth - 1” 1/4 SAE
Pitch 16 / 32 - Flat root
30° Pressure angle
Maxi transmissible torque Consult us for availability
700 N.m
A
B 150 ±0,1
10 23 75
r15
77
70,4
±0,1
- 0,030
0,060
34,6
150 ±0,1
210
220
P2 T1 T2 P1
4 holes Ø13
1
160
1 Direction 2 Direction 1
Dimensions readings and approximative characteristics subject to modifications.
from 1978)
4075 075 200 2900 170 2465 2500 112,5 187,5 19,37 141 17
4110 110 200 2900 170 2465 2500 165 275 28,42 206 17,2
4150 150 200 2900 170 2465 2500 225 375 28,60 281 17,4
4175 175 175 2625 150 2175 2500 262,5 437,5 34,31 327,35 19
4212 212 150 2175 130 1885 2500 318 530 41,57 396,56 19,4
4250 250 125 1812 105 1522 2000 375 500 49,02 467,65 20
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
F.T 40 1419 1/2
P1
P3 Allowable peack pressure.
bar
PSI
P
H Capacity
INLET
(T)
OUTLET
(P)
CATALOGUE N° 70
Ref. of RECOMMANDED FLANGES
(HPI)
(for speed 1500 rev / min)
ØC D E ØF G ØC D E ØF G INLET (T) OUTLET (P)
1" 1/4 BSP 1" BSP
D
4075 N: 4.500438 N: 4.500437
V: 4.505071 V: 4.505070
4075 1" 1/2 BSP 1" 1/4 BSP
to 60 77,8 42,6 M12 45 40 77,8 42,9 M12 22 4110 N: 4.500439 N: 4.500438
4150 V: 4.504871 V: 4.505071
2" BSP 1" 1/2 BSP
4150 N: 4.500440 N: 4.500439
E
ØC V: 4.505072 V: 4.504871
2" BSP 1" 1/2 BSP
4175 N: 4.500440 N: 4.500439
V: 4.505072 V: 4.504871
4175 2" 1/2 BSP 1" 1/2 BSP
to 70 89 50,8 M12 45 38 77,8 42,9 M12 22 4212 N: 4.500443 N: 4.500439
4250 V: 4.505074 V: 4.504871
ØF 2" 1/2 BSP 2" BSP
effective depth G 4250 N: 4.500443 N: 4.500440
V: 4.505074 V: 4.505072
REAR BODY
L
Standard
Dimensions readings and approximative characteristics subject to modifications.
34
70,4
210
158
DRIVING SHAFTS
10 20 30 40
A07
F
55 ±0,4
35
- 0,054
F1
0
Ø 31,712
F2
Ø 50
38
47,1 7,9
F.T 40 1419 2/2
F1 = 280 daN
F2 = 100 daN
Involute spline to SAE
Standard - 14 teeth - 1” 1/4 SAE
Pitch 16 / 32 - Flat root
30° Pressure angle Consult us for availability
Maxi transmissible torque
700 N.m
A
B 146
6,35 24 Ø 161,9
r 16
70,4
- 0,05
-0
P2 T1
Ø 127
T2 P1
4 holes Ø14,3
1
160
1 Direction 2 Direction 1
Dimensions readings and approximative characteristics subject to modifications.
from 1978)
4075 075 200 2900 170 2465 2500 112,5 187,5 19,37 141 19,5
4110 110 200 2900 170 2465 2500 165 275 28,42 206 19,7
4150 150 200 2900 170 2465 2500 225 375 28,60 281 20
4175 175 175 2625 150 2175 2500 262,5 437,5 34,31 327,35 21,5
4212 212 150 2175 130 1885 2500 318 530 41,57 396,56 22
4250 250 125 1812 105 1522 2000 375 500 49,02 467,65 22,5
Min. 10 s
P1 Maximum pressure in continuous duty. Maximum Pressure ⇒ P3
F.T 40 1418 1/2
P1
P3 Allowable peack pressure.
bar
PSI
P
H Capacity
INLET
(T)
OUTLET
(P)
CATALOGUE N° 70
Ref. of RECOMMANDED FLANGES
(HPI)
(for speed 1500 rev / min)
ØC D E ØF G ØC D E ØF G INLET (T) OUTLET (P)
1" 1/4 BSP 1" BSP
D
4075 N: 4.500438 N: 4.500437
V: 4.505071 V: 4.505070
4075 1" 1/2 BSP 1" 1/4 BSP
to 60 77,8 42,6 M12 45 40 77,8 42,9 M12 22 4110 N: 4.500439 N: 4.500438
4150 V: 4.504871 V: 4.505071
2" BSP 1" 1/2 BSP
4150 N: 4.500440 N: 4.500439
E
ØC V: 4.505072 V: 4.504871
2" BSP 1" 1/2 BSP
4175 N: 4.500440 N: 4.500439
V: 4.505072 V: 4.504871
4175 2" 1/2 BSP 1" 1/2 BSP
to 70 89 50,8 M12 45 38 77,8 42,9 M12 22 4212 N: 4.500443 N: 4.500439
4250 V: 4.505074 V: 4.504871
ØF 2" 1/2 BSP 2" BSP
effective depth G 4250 N: 4.500443 N: 4.500440
V: 4.505074 V: 4.505072
REAR BODY
L
Standard
Dimensions readings and approximative characteristics subject to modifications.
34
70,4
210
158
DRIVING SHAFTS
10 20 30 40
A07
F
55 ±0,4
35
- 0,054
F1
0
Ø 31,712
F2
Ø 50
38
47,1 7,9
F.T 40 1418 2/2
F1 = 280 daN
F2 = 100 daN
Involute spline to SAE
Standard - 14 teeth - 1” 1/4 SAE
Pitch 16 / 32 - Flat root
30° Pressure angle
Maxi transmissible torque Consult us for availability
700 N.m