Professional Documents
Culture Documents
University of Southeastern Philippines
University of Southeastern Philippines
College of Engineering
PROBLEM I.
A horizontal curve is to be designed for a section of a highway having a design speed of 60
km/hr.
(a) If the physical conditions restrict the radius of the curve to 150 m, what value
is required for the superelevation at this curve? Assume coef. Of friction of 0.15.
(b) Is this a good design?
Instruction:
1. Subtract the 150m radius with your last 2-digit ID, and
2. Add the speed with last 2-digit ID/10.
PROBLEM III. Add the speed as shown in the table with last 2-digit ID/10.
An urban transportation department of a city planning office has obtained at random 20 speed
data as shown on an urban freeway. Use 7 number
of intervals, determine or show the following, 66.60 56.50 73.00 65.90 60.30
80.10 59.50 65.20 55.00 50.80
a) Mean and standard deviation of the sample
66.90 67.00 68.00 62.30 67.40
distribution, 76.40 57.60 60.00 71.30 63.30
b) The most desirable speed limit on the highway, and
c) What percentage of the vehicles will be exceeding the speed limit if it is arbitrarily fixed at
70kph, probably due to air pollution requirements and safety?
NOTHING FOLLOWS