Professional Documents
Culture Documents
P N M S: PNMSJ+ Client Installation Manual
P N M S: PNMSJ+ Client Installation Manual
P N M S: PNMSJ+ Client Installation Manual
P ASOLINK
PNMSj+
N ETWORK Client Installation Manual
with Java Web Start
(Windows)
M ANAGEMENT
S YSTEM
NEC Corporation
Copyright © 2011
NWD-102898
Table of Contents
Table of Contents .................................................................................................................... i
1. Installation Sequence................................................................................................... 1
2. Java Policy Setting ....................................................................................................... 2
3. Launching PNMSj+ Client ........................................................................................ 10
Appendix A: Java Runtime Setting .................................................................................. 13
Appendix B: ADM Management Tool Setup for NEO/a ................................................... 14
Appendix C: Setting up Web Proxy .................................................................................. 19
Appendix D: In the case of launching the Clients of plural PNMSj+ Server ................. 23
Appendix E: If PNMSj+ Client has multiple NIC............................................................ 25
Appendix F: THE ADDITIONAL SETTING IF PNMSJ+ CLIENT CANNOT BE
STARTED .......................................................................................................................... 29
F-1. Remove unreachable DNS server .......................................................................... 29
F-2. Disable NetBIOS over TCP/IP ............................................................................... 32
F-3. Setting of PNMSj+ Client timeout ........................................................................ 34
-i-
NWD-102898
1. Installation Sequence
Note: with the exception of PNMSj+ Server Setting, these procedures should be executed on
the PNMSj+ workstation client.
Step1: Java Policy Setting
Pre-installation Requirements
Programs Ver
Acrobat Reader 11
Java Runtime Environment (JRE) 8 Update 74
NOTE
Because the Client falling into sleep mode may cause
PNMSj+ Server to slow down, please setup in a way
that sleep mode will not be activated.
-1-
NWD-102898
(1) Copy the java.policy file from <CD-ROM Drive> <PNMSj+ Setup Disk Directory>
policy on the PNMSj+ workstation. (Following screen shot is from PNMSj+ server)
(2) Paste the java.policy file copy in <Home Directory> of a User which you want to use as
PNMSj+ Client on the PNMSj+ workstation client.
Then Open the java.policy file with a text editor.
-2-
NWD-102898
(3) Enter the IP address of the PNMSj+ Server, (not a Client PNMSj+ address) to the line
beginning with the "codeBase".
(before)
http://0.0.0.0/Pnmsj/-
(after)
http://<PNMSj+ Server IP Address>/Pnmsj/-
NOTE
Edit "http" to "https" if a Client is required to startup
with https protocol.
Enter the IP address of the PNMSj+ Server, (not a Client PNMSj+ address) to the line
beginning with the "permission java.net SocketPermission".
(before)
"0.0.0.0:1099"
(after)
"<PNMSj+ Server IP Address>:1099"
-3-
NWD-102898
NOTE
To enable copy and paste function in PNMSj+ client, please edit
java.policy shown as follows.
- Delete "//" from the comment in 30th line.
(Before)
// permission java.awt.AWTPermission "accessClipboard";
(After)
permission java.awt.AWTPermission "accessClipboard";
Refer below for the method to rename using the command prompt.
Launch cmd.exe.
Change current directory to the <Home directory> which you pasted the java.policy
file copy in.
-4-
NWD-102898
Open the deployment properties file which is located under following folder:
<Home Directory of a User>\AppData\LocalLow\Sun\Java\Deployment
-5-
NWD-102898
B. Replace the common java.policy file with java.policy of (3) by following command.
The common java.policy file location is as shown in below:
<Java Install Folder>\lib\security\java.policy
-6-
NWD-102898
(6) Select the Security tab and click [Edit Site List].
-7-
NWD-102898
NOTE
Edit "http" to "https" if a Client is required to startup
with https protocol.
-8-
NWD-102898
-9-
NWD-102898
(1) Open the Internet Explorer and enter the IP address of the PNMSj+ Server (not a Client
PNMSj+ address), adding the suffix Pnmsj/Pnmsj.html.
Click Application shown to Internet Explorer.
For example, if the IP address is 192.168.203.21, you would need to enter address to:
http://192.168.203.21/Pnmsj/Pnmsj.html
NOTE
Edit "http" to "https" in address bar if a Client is required to
startup with https protocol. For Server setup, please refer to
Server Setting Manual.
- 10 -
NWD-102898
NOTE
(2) Following window appear and disappear automatically. It takes a few minutes depend on
the network bandwidth.
- 11 -
NWD-102898
NOTE
Enabling Smart Screen Filter of IE8 might cause
appearance of duplicate login windows.
(5) Enter the valid user name and password indicated on the PNMSj+ server.
(The user name default setting is: admin but there is no initial password. Just press Enter.
A password can then be set on the PNMSj+ server.)
- 12 -
NWD-102898
Install Java Runtime and double-click the file name (highlighted below).
- 13 -
NWD-102898
When PNMSj+ is selected to be used for monitoring of NEO/a, please install ADM
Management
Tool by following the steps listed below.
NOTE
It is necessary to remove ADM Management Tool if it has
already been installed.
You can check if ADM Management Tool is installed or not
by selecting Start -> Setting -> Control Panel->Add/Remove
Programs window.
- 14 -
NWD-102898
(1) Open <CD-ROM Drive> -> <ADMT Directory> and double-click SETUP.EXE. Check
<Welcome> window then click [Next].
- 15 -
NWD-102898
(4) Click [Browse...] button, then the <Choose Folder> window appears.
Input "C:\ADM_Management_Tool" as the Path and click [OK].
- 16 -
NWD-102898
NOTE
Destination Folder should be set "C:\ADM_Management_Tool".
- 17 -
NWD-102898
(7) <Select Program Folder> window appears. Click [Next] to start install.
(8) Click [Finish] button to close the Management Tool installation wizard.
- 18 -
NWD-102898
If firewall or routing inhibits direct connection between PNMSj+ client and NE, client
cannot call LCT in iPASOLINK. In such a case, by using Web Proxy (Squid Cache),
PNMSj+ Client can call LCT in iPASOLINK via PNMSj+ Server.
NOTE
To setup Server, please refer to Server Setting Manual.
Network1
Router/Firewall
Network2
- 19 -
NWD-102898
- 20 -
NWD-102898
(2) From Preference window, select Connections tab and click [LAN settings].
(3) From LAN settings window, check off the box for Use a proxy server for your LAN and
click [Advanced].
- 21 -
NWD-102898
- 22 -
NWD-102898
In the case of launching the Clients of plural PNMSj+ Server by only one machine, please
follow the java policy below.
(1) Copy the red frame part and paste them after the respective red frame part.
(2) Rewrite the pasted parts to the other IP Address of PNMSj+ Server. If more than 2
PNMSj+ Server exist, repeat as many times as the number of machines.
The below is an example when the IP Address of PNMSj+ Server are 192.168.203.21 and
192.168.203.33.
- 23 -
NWD-102898
- 24 -
NWD-102898
If PNMSj+ Client has multiple LAN Port(NIC), perform the following setting.
(1) Open Network and Sharing Center window (Control Panel View network status and
tasks). Click Change adapter settings.
- 25 -
NWD-102898
(3) Confirm Connections area at Advanced Settings window. Make sure that the LAN
Port(NIC) connecting to PNMSj+ Server is on the top of the area.
If not, select the LAN Port(NIC) connecting to PNMSj+ Server, enter click button
then move that LAN Port(NIC) to the top.
- 26 -
NWD-102898
(4) In the Network Connections window, right-click LAN Port(NIC) connected to PNMSj+
Server and select Properties.
(5) In the Ethernet Properties window, select Internet Protocol Version 4 (TCP/IPv4) and
click [Properties].
- 27 -
NWD-102898
(6) In the Internet Protocol Version 4 (TCP/IPv4) Properties window, click [Advanced].
- 28 -
NWD-102898
If PNMSj+ Client cannot be started following by the Manual Setting, perform the following setting.
- 29 -
NWD-102898
(2) In the Network Connections window, right-click LAN Port(NIC) connected to PNMSj+
Server and select Properties.
(3) In the Ethernet Properties window, select Internet Protocol Version 4 (TCP/IPv4) and
click [Properties].
- 30 -
NWD-102898
(4) In the Internet Protocol Version 4 (TCP/IPv4) Properties window, click [Advanced].
- 31 -
NWD-102898
(2) In the Network Connections window, right-click LAN Port(NIC) connected to PNMSj+
Server and select Properties.
- 32 -
NWD-102898
(3) In the Ethernet Properties window, select Internet Protocol Version 4 (TCP/IPv4) and
click [Properties].
(4) In the Internet Protocol Version 4 (TCP/IPv4) Properties window, click [Advanced].
- 33 -
NWD-102898
- 34 -
NWD-102898
- 35 -
NWD-102898
(3) In the Environment Variables window, click either [New...] of User variables or
System variables.
(4) After inputting on either window of New User Variable or New System Variable, click
[OK].
Variable name: PNMSCLIENT_LOGINTIMEOUT
Variable value: <Client Timeout Period>
Client Timeout Period from 1 to 2147483 secs.
(User Variable is the priority if both settings take place.)
(5) Restart the WEB Browser to reflect the settings if WEB Browser is already activated.
- 36 -
NWD-102898
(2) Restart the WEB Browser to reflect the settings if WEB Browser is already activated.
- 37 -