Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

To:Doehle - Inspektion-Team 2 From:Shell Deutschland Oil GmbH

Elbchaussee 370 Shell Marine Products / DIS/M52


22609 Hamburg Suhrenkamp 71-77
Germany 22284 Hamburg
Germany
Phone:+494063244030
Fax:+494063245754

REPORT SUMMARY
MAERSK EDIRNE - 940973
Machinery Code Sample No Status Report Date
Auxiliary Diesel Engine 2 - Crankcase (Residual Fuel) A02 76163822 ATTENTION 16/11/2017

All advice is given in good faith and assumes that the sample fully represents the indicated oil charge. Any recommended values refer to normal ranges. For all
queries, please remember to quote your Sample Number(s). Once printed, this document is un-controlled. For current versions, authorised users should refer to
Shell Opica online at www.rla.shell.com. This report is provided subject to the general RLA Terms and Conditions available at www.rla.shell.com.

1 of 2
This Sample Status ATTENTION

MAERSK EDIRNE - 940973


A02 Auxiliary Diesel Engine 2 - Crankcase (Residual Fuel) Lubricant: Shell Argina S4 40
HHI (Himsen) - H 32/40 Date Drawn: 04/11/2017
Peter Doehle Schiffahrts KG Date Analysed: 16/11/2017

RESULTS
This Sample Previous Samples
1 2319323
2 2186234
3 2119803
4 1995793
5 1948592

Sample Number 76163822 73408340 73408224 63860269 63860133


Sample Condition ATTENTION ATTENTION NORMAL NORMAL NORMAL
Sample Date 04/11/2017 12/04/2017 14/12/2016 31/05/2016 01/03/2016
Sample Received 14/11/2017 12/04/2017 27/12/2016 01/06/2016 10/03/2016
Date Analysed 16/11/2017 20/04/2017 30/12/2016 03/06/2016 14/03/2016
Lubricant Shell Argina X Shell Argina S4 Shell Argina X Shell Argina X Shell Argina X
40 40 40 40 40
Date Diagnosed 16/11/2017 20/04/2017 30/12/2016 03/06/2016 14/03/2016
Component Life (Hour) 14793 Hours 13831 Hours 12575 Hours 11376 Hours 10571 Hours
Lubricant Life (Hour) 962 Hours 13831 Hours 12575 Hours 11376 Hours 10571 Hours
Oil Added (Litre) - 20 Litres 800 Litres 600 Litres 300 Litres
Fuel Used - - - - -
Viscosity@100 Deg C - cSt 14.6 14.5 14.6 15.7 13.8
Water Content %v 0.0 0.0 0.0 0.0 0.0
Flash Point Deg C >190 >190 >190 >190 >190
Total Base No. (TBN) mg KOH/g 26.9 34.4 30.5 28.1 29.2
Index of Contamination (IC) 1.07 1.52 1.52 1.63 1.72
Merit of Dispersancy (MD) 91.0 92.0 91.0 96.0 97.0
Demerit Points (DP) 10.0 12.0 14.0 7.0 5.0
Calcium (Ca) % 1.53 1.34 1.28 1.35 1.31
Zinc (Zn) % 0.05 0.04 0.04 0.04 0.04
Phosphorus (P) % 0.04 0.04 0.03 0.03 0.04
Barium (Ba) % 0.00 0.00 0.00 0.00 0.00
Iron (Fe) mg/kg 14 9 11 14 17
Chromium (Cr) mg/kg 0 0 0 0 0
Molybdenum (Mo) mg/kg 7 1 1 1 1
Tin (Sn) mg/kg 3 1 3 4 3
Lead (Pb) mg/kg 0 0 0 1 0
Copper (Cu) mg/kg 1 5 8 10 4
Sodium (Na) mg/kg 17 11 14 15 18
Magnesium (Mg) mg/kg 52 57 51 60 60
Boron (B) mg/kg 1 1 0 0 0
Aluminium (Al) mg/kg 5 4 4 5 6
Silicon (Si) mg/kg 7 8 5 10 7
Vanadium (V) mg/kg 72 48 72 69 105
WPI 3 64 1 9 6
COMMENTS (Sample Number : 76163822, Vessel/Machine Code : 940973/ A02)
Note Molybdenum (Mo) content.
The oil is fit for further use, but continue to monitor metal(s) content.

All advice is given in good faith and assumes that the sample fully represents the indicated oil charge. Any recommended values refer to normal ranges. For all
queries, please remember to quote your Sample Number(s). Once printed, this document is un-controlled. For current versions, authorised users should refer to
Shell Opica online at www.rla.shell.com. This report is provided subject to the general RLA Terms and Conditions available at www.rla.shell.com.

2 of 2

You might also like