This certificate confirms that Engr. Nabeel Siddiqui completed 40 hours of online training from December 25th, 2020 to January 3rd, 2021. The training covered basic power system design concepts, protection drawings, fault analysis, load flow analysis, coordination studies, arc flash analysis, motor analysis, and programming in ETAP software versions 12.6, 18, and 19. Upon completion, the certificate was issued on January 4th, 2021 and signed by Engr. Qazi Arsalan Hamid.
This certificate confirms that Engr. Nabeel Siddiqui completed 40 hours of online training from December 25th, 2020 to January 3rd, 2021. The training covered basic power system design concepts, protection drawings, fault analysis, load flow analysis, coordination studies, arc flash analysis, motor analysis, and programming in ETAP software versions 12.6, 18, and 19. Upon completion, the certificate was issued on January 4th, 2021 and signed by Engr. Qazi Arsalan Hamid.
This certificate confirms that Engr. Nabeel Siddiqui completed 40 hours of online training from December 25th, 2020 to January 3rd, 2021. The training covered basic power system design concepts, protection drawings, fault analysis, load flow analysis, coordination studies, arc flash analysis, motor analysis, and programming in ETAP software versions 12.6, 18, and 19. Upon completion, the certificate was issued on January 4th, 2021 and signed by Engr. Qazi Arsalan Hamid.
THIS CERTIFICATE ENSURED ACTIVE PARTICIPATION OF ENGR. NABEEL SIDDIQUI (TRAINEE ID- AE0092-A-445) IN PRACTICAL POWER SYSTEM SCHEME DESIGN AND SIMULATION (25TH DEC 2020 -3RD JAN 2021-40 TRAINING HOURS), ENGR. NABEEL SIDDIQUI IS TRAINED FOR BASIC SLDS CONCEPTS,CONTROL AND PROTECTION DRAWINGS CONCEPT, FAULT CONCEPTS AND SIMULATION, AC & DC LOAD FLOW ANALYSIS, STAR COORDINATION(50,50N,51,51G,64G,87,27,81,32,52,21), AC & DC ARC FLASH ANALYSIS, AC & DC OPTIMAL AND UNBALANCED LOAD FLOW ANALYSIS, GROUNDING GRIDS, OPTIMAL CAPACITOR PLACEMENT, HARMONIC ANALYSIS, TRANSIENT ANALYSIS, PROTECTION SCHEMES DESIGNING ,STATIC AND DYNAMIC MOTOR ANALYSIS, RENEWABLE AND DG INTEGRATION AND ANALYSIS, SEQUENCE SWITCHING PROGRAMMING ON ETAP12.6,ETAP 18 AND ETAP 19.