The TX7320 is an audible alarm device that notifies people of a fire occurrence. It uses a microcomputer to output a fixed-frequency PWM signal that is amplified to produce a strong buzzing sound from the buzzer. Key features include ISO certification, EN54-3 compliance, built-in MCU processor and digital addressing, 17 programmable tones, and the ability to operate on a loop or external power supply. It has an indoor protection rating and can be ceiling or wall mounted for simple installation.
The TX7320 is an audible alarm device that notifies people of a fire occurrence. It uses a microcomputer to output a fixed-frequency PWM signal that is amplified to produce a strong buzzing sound from the buzzer. Key features include ISO certification, EN54-3 compliance, built-in MCU processor and digital addressing, 17 programmable tones, and the ability to operate on a loop or external power supply. It has an indoor protection rating and can be ceiling or wall mounted for simple installation.
The TX7320 is an audible alarm device that notifies people of a fire occurrence. It uses a microcomputer to output a fixed-frequency PWM signal that is amplified to produce a strong buzzing sound from the buzzer. Key features include ISO certification, EN54-3 compliance, built-in MCU processor and digital addressing, 17 programmable tones, and the ability to operate on a loop or external power supply. It has an indoor protection rating and can be ceiling or wall mounted for simple installation.
Input voltage: Loop power: 24VDC The TX7320 is an audible alarm device activated by the (18V to 27.5V) fire alarm controller, so to notify persons in the vicinity of External PSU: 24 VDC (20V to 27.5V) the fire occurrence to take appropriate measures. It uses Typical current: Loop: standby: 0.6mA, a single-chip microcomputer to output a fixed-frequency Alarm: 1.5mA PWM signal which is amplified to promote buzzer to make External PSU: Standby: 0.6mA, Alarm: 10mA strong buzzing. Saving current: Standby: 1.2mA, Alarm: 4mA (Loop powered) Protocol / addressing: T&A, value range from 1 to 254 Dual address: 1st alert tone / 2nd evacuate Feature and benefits tone Sound level pressure: 102 dB (A) at 1m / tone 14 • ISO certified. Material: ABS • EN54-3 compliance. Color: Red glossy finish • Built-in MCU processor and digital addressing. Dimension: Diameter 110mm / • 17 tones programmable sound output. Height 39.6mm • Programmable evacuate or pre-alarm/evacuate signal. Weight: 176g with base / • Low and normal consumption mode. 110g without base • One or two addresses mode. Class: Type A, indoors, • Onsite adjustable parameters. IP21 protection rating • Loop or external power supply. Operating temperature: -10°C to 50°C • Beautiful design. Humidity ≤ 95%RH, no condensation • Ceiling or wall mount, simple installation.