Professional Documents
Culture Documents
3051-Lab Equipment For Establishment of CATBM (For Basis)
3051-Lab Equipment For Establishment of CATBM (For Basis)
3051-Lab Equipment For Establishment of CATBM (For Basis)
2. Any addition, deletion or modification of any clause of the procurement terms & conditions/ BoQs of
CUI Lahore Campus by any vendor will not be acceptable and may lead to rejection of the bid.
3. Only registered Suppliers, who are on Active Taxpayers List (ATL) of FBR, are eligible to participate
in tender.
4. The contract will be executed and handed over in satisfactory conditions up to the entire satisfaction of
COMSATS University Islamabad, Lahore Campus.
5. Documents along with Pay Order / Demand Draft amounting to Rs. 1,000/- as a tender document fee
(Non-Refundable) shall be submitted in favor of COMSATS University Islamabad, Lahore Campus to the
address given below. No bid will be accepted without tender documents’ fee.
7. The exact completion/installation/ delivery time from the date of the purchase / work order will be
120 days. The handing over / completion time for this contract is of critical importance.
8. Your bid proposal should be inclusive of freight and all other taxes and to be delivered at COMSATS
University Islamabad (CUI), Lahore Campus’s premises.
9. After opening of bids, CUI-Lahore Campus will examine the bids for completeness as per tender document.
10. Purchase order (s) will be awarded to the lowest or technically recommended bidder (s) on the basis of item
wise / subtotal wise / grand total wise according to the nature of BoQs.
11. The bid should be submitted in a sealed envelope up to May 14, 2020 on or before 1100hrs and will be
opened on the same date at 1130hrs in the presence of available bidders.
12. COMSATS University Islamabad, Lahore Campus, will follow the PPRA rule of single stage two envelope
procedure;
i. The bid shall comprise a single package containing two separate envelopes. Each envelope shall
contain separately the financial proposal and the technical proposal;
iv. The envelope marked as “FINANCIAL PROPOSAL” shall be retained in the custody of the
procuring agency without being opened;
v. The procuring agency shall evaluate the technical proposal in a manner prescribed in advance,
without reference to the price and reject any proposal which does not conform to the specified
requirements;
vi. During the technical evaluation no amendments in the technical proposal shall be permitted;
vii. The financial proposals of bids shall be opened publicly at a time, date and venue announced and
communicated to the bidders in advance;
viii. After the evaluation and approval of the technical proposal the procuring agency, shall at a time
within the bid validity period, publicly open the financial proposals of the technically accepted bids
only. The financial proposal of bids found technically nonresponsive shall be returned un-opened
to the respective bidders;
ix. and
14. The envelope shall also bear the word “CONFIDENTIAL” and following identification quotation of
“Lab Equipment for Establishment of Centre for Advanced Technologies in Biomedical
Materials (Knowledge Economy Initiative)”.
15. The bid form (BoQs) must be duly filled in, stamped and signed by the authorized representative of the
bidder.
16. If the vendor fails to deliver the goods / services to COMSATS University Islamabad (CUI), Lahore
Campus within the given deadline, any of the following can be opted by CUI Lahore campus on the
recommendation of the end user and approval of the authority;
a. An extension in the delivery period may be granted in case a valid reason/justification with
necessary documentary evidence is provided by the vendor supporting the reason for delay.
b. A penalty upto 10% of the invoice value may be charged.
c. Purchase order may be cancelled along with confiscation of earnest money if the vendor fails to
deliver the goods / services after the initial or extended delivery time, as the case may be.
17. If the delivered goods / services are not according to the required quality standards / specifications, the
same shall be liable to be rejected after inspection. The vendor would be required to supply as per
requirements mentioned in our BoQs, otherwise the purchase / work order will be cancelled after due date
with confiscation of earnest money.
18. Deduction of Income Tax and any other tax will be deducted at source according to Government prevailing
rules.
20. All prices should be valid for at least 120 days. Withdrawal or any modification of the original offer within
the validity period shall entitle CUI-Lahore Campus to forfeit the earnest money in favor of the CUI-Lahore
Campus and / or put a ban on such vendor participation in tenders / works.
21. It is the sole responsibility of the agent / supplier / manufacturer to comply with the applicable laws, be
national or international.
22. In case of any dispute or grievance, the matter shall be addressed as per PPRA rules.
23. The CUI-Lahore Campus reserves the right to modify the quantities of goods / services at any time before
the award of purchase / work order.
24. Warranty mentioned in BoQs shall be provided from the date of installation or standard warranty whichever
is higher
25. 05% of the total value of the Invoice will be retained as security by COMSATS University Islamabad
(CUI), Lahore Campus, and will be released after warranty period i.e. As Mentioned in BoQs which
will be counted from the date of Installation / Completion of work / Supply.
26. The bidder is required to furnish in form of Bank deposit/ CDR / Pay order equivalent to 2% of the
total Bid price as Earnest Money crossed in favor of “COMSATS University Islamabad, Lahore
Campus”.
27. CUI Lahore Campus reserves the rights to reject the bid if;
i. Received without earnest money
ii. Received later than the date and time fixed for tender submission
iii. The tender is unsigned/ unstamped
iv. The offer is ambiguous
v. The offer is conditional
vi. The offer is from a firm, which is black listed by any Govt. Office.
vii. The offer is received by telephone/telex/fax/telegram.
viii. Any unsigned / ambiguous erasing, cutting / overwriting etc. is made.
28. The bidder should furnish a certificate as worded below in token of acceptance of all the terms and
conditions of the tender otherwise the tender will not be considered under any circumstances.
29. The undersigned affirm that the terms and conditions as contained in this document have been read and
accepted and that in the event of selection of my/our rate the agreement in the prescribed form will be
entered into:
Postal Address:………………………………………………………………………………….
Tel. / Mobile:……………………..………………………Email:……………….……………...…
NTN# :………………………………………….GST#:…………………………..………
Signature: ………………………………….
Please also attach the Certificate supporting being Active Taxpayer as per requirement of FBR.
No change in the BoQs (Specs & Qty.) of CUI-Lahore Campus, as detailed below, is Please mention the quoted
allowed. Any additional information may be mentioned in the blank columns (i.e. Model / Brand with
model / brand or Price). Any modification in CUI-Lahore Campus BoQ may lead to meeting the all
rejection of bid (fully or partially). specifications mentioned
Sr. # Item Name Requirement / Specifications Qty in BoQs
A system required to control a
three electrode cell and
measures the voltage difference
between a Working Electrode
and a Reference Electrode and
to be used in the area of Photo-
electrochemical sensing,
electrochemcial sensing and
supercapacitor application.
Photo- It should measure:
Electrochemical Chopped Light
Workstation Voltammetry
Cyclic voltammetry
Differential pulse
voltammetry
Impedance spectroscopy,
Amperometry
Chornoamperometry
Galvanostatic charge
discharge
1 Potentiostat Battery cycling 1
Linear sweep voltammetry
Electrochemical
Impedance
10 μHz (or lower) to 8 MHz (or
Spectroscopy
higher)
(EIS) frequency
range
Maximum
2A or better
current
10 nA (or lower) to 1A (or
Current Range
higher)
Complete Installation,
Installation operation, Onsite Training
(installation)
12 Months from the date of
installation (parts and service)
with vendor having good local
reputation with running
machines and well-trained
Warranty & engineers
Others Proofs of trainings of company
personnel/engineers should be
provided
List of installations in Pakistan
should be provided
Type: Peristaltic
Variable-Speed
Graphical LCD display
Contamination-free pump
system and maintenance-free
General features high-accuracy motor
Self-priming
To handle high and low
viscosities liquids
1
Reversible motor with
17.1 Flow Pumps
on/off/reverse possibility
Complete Digital system
Contain
Variable-Speed Pump drive
Key Multiple pump heads
Components
Tubing
Pump head Mounting
Hardware
Flow rate range (ml/min) : 1
Pump drive 1
(or lower) to 480 (or higher)
FTO
(Fluorine- 300 mm × 300 mm × 2.3
doped tin mm - 25
oxide) glass (13 Ώ•s q-1)
slide
Indium tin
oxide 75 mm × 25 mm × 1.1
coated glass mm - 25
slide, (15-25 Ω/sq)
rectangular
Total
Yes
Exhaust
UPS
As recommended by OEM 03
backup
Up to 60 minutes or higher
Time
Continuous mode
2 extra tips
Accessories
1 extra battery
Optical
65 or better 135 or better
power (W)
Peak wave
lengths 365, 385, 395 or 400 or 405
Blue LED
25.2 (nm) 01
Lights
9 or better (applicable to each of the
Watt/cm2 aforementioned peak wavelengths,
respectively)
Simultaneous or individual
Controller control and programming of 4 (or
more) UV LED curing heads
Industrial grade
Heavy duty
Blade
stainless steel or
better for chopping
Adjustable
8000 rpm (or more)
speeds
1ml (or less) to 01
Capacity
500mL (or more)
Material
Stainless Steel -304
Internal
Temperatu
150 °C or higher 01
31 Viscometer re Sensor
Display digital
Rotational
speed 0.1 (or lower) to 6 (or higher)
(RPM)
Measuring
spindles or cylinder systems
System
X-Ray DC High
Generator Frequency
Tube Voltage: 60
kV (or more)
Tube Current :2
mA (or more)
Anode Type:
Stationary
X-Ray X-ray Tube
Anode Angle: 15-
system
25˚
Focal Spot: 0.6 mm
(or less)
Heat Capacity: 8.5
KHU (or more)
Exposure 0.01-1.60 Sec. (0.01
Portable X- Time Setting Sec step) or better
33 Total 02
Ray 1.6 mmAI or better
Filtration:
35 mm x 25 mm or
better
Active areas
30 mm x 22 mm or
better
Dental >20 lp/mm or
digital X- Resolution
better
ray Sensor
Total Cable
2.80 more
Length
1600 x 1200 or
Image Pixels
better
12 months or more from the date of
Warranty
installation
Pressure gauge
accessories
Liquid nitrogen level indicator
Transfer hoses
Solenoid valve
Drainage hose,
Stainless steel baskets
Accessories
And all other requisite accessories
for operation as aforementioned
12 Months from the date of
installation (parts and service)
with vendor having good local
reputation with running
machines and well-trained
Warranty
engineers
& Others
Proofs of trainings of company
personnel/engineers should be
provided
List of installations in Pakistan
should be provided
Used for a broad range of mixing
Purpose and agitation applications in the
laboratory. Brushless dc motor
Speed
5–50 rpm or better
range
Power Auto function restoration in case of
restoration power failure
Motion Tilting/Rocking
LCD Display
Shaker Control
37 (Rocking Knob or touch or pressing button 02
platform)
Speed
50-300 rpm or better
range
Motion Orbital
Temperatu
Up to 60°C or better
re range
Accessories
Grinding wheel fine (100 grit or 01
finer)
Charger
Brad Point Drill & Masonry Bits
(tungsten carbide tips)
Screws / Fasteners
Nutdrivers
Ratcheting Screwdriver
Gauge
Sockets
Socket Adaptor
Storage box
Power
As recommended by OEM 1
backup
12 Months from the date of
installation (parts and service)
with vendor having good local
reputation with running
machines and well-trained
Warranty
engineers
& Others
Proofs of trainings of company
personnel/engineers should be
provided
List of installations in Pakistan
should be provided
Thin sectioning of biological tissues
at cryogenic temperature. The
Purpose instrument should be complete with
all accessories including blades,
sample holders, knives etc necessary
for smooth running.
Temperature setting
-35°C (or below)
Section thickness setting
5μm (or below)
to
48 Cryostat 01
General 100μm (or above)
Features Specimen feed
15 mm or better
Vertical specimen stroke
48 mm or better
Freezing shelf temperature
-35°C (or below)
Tissue freezing medium
125ml
Accessories
Knife case large
01
Parts modeling
Specimen
Should be included
Retraction
Compatible blades & all requisite
Accessories accessories needed to perform the
aforementioned functions
12 Months from the date of
installation (parts and service)
with vendor having good local
reputation with running
machines and well-trained
Warranty
engineers
& Others
Proofs of trainings of company
personnel/engineers should be
provided
List of installations in Pakistan
should be provided
Purpose of Microplate Spectrophotometer is
Microplate used for DNA and RNA
Spectropho quantitation, cytotoxicity assays,
tometer Reporter gene assay, Enzyme assays
Application RNA, DNA and Protein
s quantification and kinetic assays
Light
Xenon Flash lamp
Source
Wavelength 300 nm (or lower) to 950 nm (or
Microplate Range higher)
57 01
Reader
Measureme
15 seconds or less
nt Speed
All bids shall be evaluated in accordance with the following evaluation criteria and other terms &
conditions set forth in this bidding document.
a. The bids shall be evaluated to strictly ensure that the quoted brand/ model meet all the BoQ/
specification requirements given in the tender document for each item.
b. In addition to the BoQ requirements, vendors must meet the vendor qualification criteria
/company profile requirements (if any), as set forth in this tender document.
c. Supporting literature of the quoted model must be attached for verification & technical
evaluation of the required specification by the technical committee. In case of any clash is
found between the quoted model and the supported literature may lead to rejection of bid.
d. The vendor must have an authorized dealer certificate against all items except
Sr. # 50, 51, 52, 53 & 54 of the quoted product/Item (Certificate with current year’s validity)
of Original Manufacturer for all Equipment which shall be also verifiable from the Principal
/ Manufacture Website or through email. It must be attached with bid otherwise such
item/bid may be rejected.
Power
backup with As recommended by
additional OEM for optimum 1
Servo operations
Stabilizer
Proofs of trainings of
company
personnel/engineers
should be provided
List of installations in
Pakistan should be
provided
Qualitative and
quantitative analysis
Purpose of organic compounds
e.g., drugs, vitamins,
proteins, enzymes etc.
Gradient pump 01
with degasser,
General manual injector
features variable
wavelength
detector.
Dual pump with dual
piston for binary
solvents
Pressure: up to 400
Gradient
bar (or higher) 01
Pump
Rate up to 5 mL/min
(or higher)
Integrated Degassing
Unit
HPLC
Manual Manual injector with
5 Injector sample injection valve 01
and standard loop.
Variable Wavelength
Detector Detector
01
range: 190 nm(or less)
to 600 nm (or more)
Colum Compartment:
from ambient to 60℃ 01
or better range
Column C18
(compatible with 01
Accessories quoted machine)
Column C8
(compatible with 01
quoted machine)
Compatible sample
04
injections
Power As recommended by
01
backup OEM
As recommended by
Computer
OEM with original 01
system
windows
Stainless steel
Pump Head
material, Compatible
Mounting 1
with pump drive and
Hardware
pump head
12 Months from
the date of
installation (parts
and service) with
vendor having
good local
reputation with
running machines
and well-trained
Warranty & engineers 1
Others Proofs of trainings
of company
personnel/enginee
rs should be
provided
List of
installations in
Pakistan should
be provided
Type: Peristaltic
Variable-Speed
General Graphical LCD
17.1 Flow Pumps 1
features display
Contamination-free
pump system and
Signature & Stamp of Bidder
Page 80 of 126
CUI-LHR-PUR-Tender-001
maintenance-free
high-accuracy
motor
Self-priming
To handle high and
low viscosities
liquids
Reversible motor
with on/off/reverse
possibility
Complete Digital
system Contain
Variable-Speed
Pump drive
Key Multiple pump
Components heads
Tubing
Pump head
Mounting
Hardware
Flow rate range
(ml/min) : 1 (or
lower) to 480 (or
Pump drive higher) 1
Speed control
sensitivity: ±1%
or better
Compatible with
pump drive
Rotor materials-
Pump head 2
Stainless steel
Automatic tubing
retention
Material compatible
with pump head and
pump drive
Tubing set (20-25 feet
Length) - Flow rate 10
1
Pump tubing to 200 ml/min or
better
Tubing set (20-25 feet
Length) - Flow rate
1
0.5 to 150 ml/min or
better
Stainless steel
Pump Head
material, Compatible
Mounting 1
with pump drive and
Hardware
pump head
12 Months from
Warranty &
the date of 1
Others
installation (parts
Signature & Stamp of Bidder
Page 81 of 126
CUI-LHR-PUR-Tender-001
and service) with
vendor having
good local
reputation with
running machines
and well-trained
engineers
Proofs of trainings
of company
personnel/enginee
rs should be
provided
List of
installations in
Pakistan should
be provided
8mm T-Nuts
- x200
(x200)
8mm T-bolts
- x200
(x200)
Freque 60 hz (or
ncy higher)
Shear
assembly for
mixer
1ml (or
lower) to 01
10mL (or
more)
assembly for
Assemb
5ml (or
lies
lower) to 01
(stainles
50mL (or
s steel)
more)
Assembly for
50ml (or
lower) to 01
500mL (or
more)
Installation and on-site
Installation
(installation) training
Warranty 12 Months from the
and Others date of installation
Control
±0.1 °C or better
Resolution
Shelf
2 or more
loading
Repeatabili
±0.2% or better
ty
12 Months from
the date of
installation (parts
and service) with
vendor having
good local
reputation with
running machines
Warranty and well-trained
& Others engineers
Proofs of trainings
of company
personnel/engineer
s should be
provided
List of installations
in Pakistan should
be provided
Purity Level: Pt ≥
99.95%
Crucible 1 1
Volumetric Capacity:
Platinum 10mL
32
Crucible Purity Level: Pt ≥
99.95%
Crucible 2 1
Volumetric Capacity:
30mL
DC High
X-Ray
Frequen
Generator
cy
X-Ray
Portable X- Tube
33 system 02
Ray Voltage:
X-ray Tube 60 kV
(or
more)
Effective Chamber
Capacity
Capacity 50 L (or more)
With programs: for
Solids, Waste
Programs destruction bags, Liquid
waste, Liquid Media
and Cleaning.
Integrated separate
Heating steam generator (no
Type heating elements in
sterilization chamber).
Up to 135ºC (or higher)
Steam
Parameters Pressure 4 bar (or
higher)
Specialized Safety door
lock during operation
and till cooling
Safety Lock
according to
international Pressure
Vessel Regulations
Electronic pressure
Pressure transducer for pressure
control and temperature
control
Multiple built in
Sterilizatio programs for
n program waste destruction with
ventilation of waste bags
Water inlet Autofill function
Integrated For improved air
Vacuum release and quicker
System drying
Rapid Using cold water and
Cooling sterile compressed air
12 Months from
the date of
installation (parts
and service) with
vendor having
good local
reputation with
running machines
and well-trained
Warranty
engineers
Proofs of trainings
of company
personnel/engineer
s should be
provided
List of installations
in Pakistan should
be provided
Signature & Stamp of Bidder
Page 104 of 126
CUI-LHR-PUR-Tender-001
Sterilization of
Glassware, Surgical
Purpose
instruments, Media and
biological waste
Vertical Laboratory
Sterilizer, Fully
automatic, Interior
Type
Chamber Stainless steel.
Digital microprocessor
controlled
Sterilizatio
n
Up to 135℃ or higher
Temperatu
re
Programs Multi-mode selection
Effective
50 Litre or higher
Capacity
Over pressure power
cut off
Safety Over temperature
power cut off
Current leak detection
Rated
working 2.5 bar or higher
pressure
Autoclave
36.1 Digital Control 02
Sterilizer
Controls Programmable or Built
in Multiple Programs
Drainage hose,
Stainless steel baskets
And all other requisite
Accessories
accessories for
operation as
aforementioned
12 Months from
the date of
installation (parts
and service) with
vendor having
good local
reputation with
running machines
Warranty and well-trained
& Others engineers
Proofs of trainings
of company
personnel/engineer
s should be
provided
List of installations
in Pakistan should
be provided
Shaker Used for a broad range
37 (Rocking Purpose of mixing and agitation 02
platform) applications in the
Signature & Stamp of Bidder
Page 105 of 126
CUI-LHR-PUR-Tender-001
laboratory. Brushless dc
motor
Speed
5–50 rpm or better
range
Auto function
Power
restoration in case of
restoration
power failure
Motion Tilting/Rocking
LCD Display
Control Knob or touch or
pressing button
As recommended by
UPS
OEM
12 Months from
the date of
installation (parts
and service) with
vendor having
good local
reputation with
running machines
Warranty and well-trained
& Others engineers
Proofs of trainings
of company
personnel/engineer
s should be
provided
List of installations
in Pakistan should
be provided
Used for a broad range
Purpose of
of mixing and agitation
the Orbital
applications in the
Shaker
laboratory.
Speed
50-300 rpm or better
range
Motion Orbital
Temperatu
Up to 60°C or better
Shaker re range
38 (Horizontal, LCD Display to control 02
Orbital) Control temperature, speed and
time
As recommended by
UPS
OEM
12 Months from
the date of
Warranty installation (parts
& Others and service) with
vendor having
good local
Signature & Stamp of Bidder
Page 106 of 126
CUI-LHR-PUR-Tender-001
reputation with
running machines
and well-trained
engineers
Proofs of trainings
of company
personnel/engineer
s should be
provided
List of installations
in Pakistan should
be provided
Max
12 or more x 2 mL
Capacity
14,000 rpm or more
Max speed
(100 rpm increments)
1.5/2 ml tubes along with
suitable rotor and
adopter capable of
Rotor holding at least 12
capacity samples at a time
and 0.5 ml tubes along with
adaptor suitable rotor and
adopter capable of
holding at least 12
samples at a time
15 sec or less to 99
Timer
minutes or more
39 Centrifuge Features LED with control panel 03
12 Months from the
date of installation
(parts and service)
with vendor having
good local
reputation with
running machines
Warranty and well-trained
& Others engineers
Proofs of trainings
of company
personnel/engineers
should be provided
List of installations
in Pakistan should
be provided
Must be able to
detect absorbance,
luminescence,
Microplate fluorescence, time-
Reader resolved fluorescence
40 Purpose: 01
(Florescence, (TRF) in plate
Multi Mode) format
real time kinetic
monitoring.
software controlled.
Signature & Stamp of Bidder
Page 107 of 126
CUI-LHR-PUR-Tender-001
96 well plate or more
Plate Type
types of plate
UV-Vis
Detection Fluorescence intensity
module Luminescence
(Or more)
Light Xenon flash or Halogen
source lamp or better
Temperatu
65°C or more
re Control
Atmospheri
c control Regulate CO2 and O2
unit
UPS As recommended by
01
backup OEM
Complete installation
Installation
with onsite training
12 Months from the
date of installation
(parts and service)
with vendor having
good local
reputation with
running machines
and well-trained
Warranty engineers
& Others Proofs of trainings
of company
personnel/engineers
should be provided
List of installations
in Pakistan should
be provided
CE certified Total
exhaust cabinets for
Purpose work with toxic
chemicals and infectious
agents
Safety Class II
41 02
Cabinet
Type B2
Working 12 square feet (or
area bigger)
Filter HEPA/ULPA
Signature & Stamp of Bidder
Page 108 of 126
CUI-LHR-PUR-Tender-001
Graphical LCD display
containing:
on/off fan control with
adjustable air velocity
Working window
control control
LED lamp ON/OFF
UV lamp ON/OFF
Elapsed time counter
and alarm for HEPA
filter replacement
Chamber Stainless Steel
Materials
Compatible trolley
Other
UV light
features
Total Exhaust
UPS As recommended by
backup OEM
Complete installation
Installation
with onsite training
12 Months from the
date of installation
(parts and service)
with vendor having
good local
reputation with
running machines
Warranty and well-trained
& Others engineers
Proofs of trainings
of company
personnel/engineers
should be provided
List of installations
in Pakistan should
be provided
CE certified exhaust
cabinets for work with
Purpose
toxic chemicals and
infectious agents
Class II
Safety Type A2
41.1 6
Cabinet
Working 12 square feet (or
area bigger)
Filter HEPA/ULPA
Graphical LCD display
control
containing:
Stick
180 A (230 V) @ 25%
Welding
duty cycle or better
Output
TIG
180 A (230 V) @ 30%
Welding
duty cycle or better
Output
Ratcheting Screwdriver
Gauge
Sockets
Socket Adaptor
Storage box
Quick-change chucks –
changing bits must be
fast and tool-free
Working mode:
Hammer drilling,
Drilling, Chiseling
Hammer Active vibration
Drill reduction mechanism 01
(Corded) Single-sleeved chuck for
easy bit changes
Multi-position side
handle for ease of use
1/2 in. chuck to
accommodate larger
bits along with
associated bits
1-year warranty (or
more)
Anvil incorporated
Power As recommended by
1
backup OEM
12 Months from the
date of installation
(parts and service)
with vendor having
good local
reputation with
running machines
Warranty and well-trained
& Others engineers
Proofs of trainings
of company
personnel/engineers
should be provided
List of installations
in Pakistan should
be provided
Thin sectioning of
biological tissues at
Purpose cryogenic temperature.
48 Cryostat 01
The instrument should
be complete with all
accessories including
Signature & Stamp of Bidder
Page 118 of 126
CUI-LHR-PUR-Tender-001
blades, sample holders,
knives etc necessary for
smooth running.
Temperature setting
-35°C (or below)
Section thickness setting
5μm (or below)
to
100μm (or above)
General Specimen feed
Features 15 mm or better
Vertical specimen
stroke
48 mm or better
Freezing shelf
temperature
-35°C (or below)
Tissue freezing medium
125ml
Knife case large
01
Cryostat oil
250ml
Knives 16 cm TC
03
Knives 16 cm long steel
Accessories
03
Blades TC disposable
50
Blade high profile
disposable
10
Blade low profile
disposable
10
UPS As recommended by
01
backup OEM
Complete installation
installation
with onsite training
12 Months from the
date of installation
(parts and service)
with vendor having
good local
reputation with
running machines
Warranty and well-trained
& Others engineers
Proofs of trainings
of company
personnel/engineers
should be provided
List of installations
in Pakistan should
be provided
Parts modeling
Biomedical device
designs
Must be from world
renowned company
Others having a track record of
providing CAD/CAM
solutions to industries
Surgical light source to
illuminate the
Operating area.
Facilitation in surgical
Purpose procedures for animal
trials. Compact exam
light for surgical
procedures on
experimental animals.
Light
LED
source
Floor standing
Installation
Six-dimensional joint;
Surgical light type
50 360º, 02
for OT
Multiple luminescence
Illumination depth:
≥600(mm) ≥2ºC,
Luminance Higher than 100000
Lux.Color
Spot Diameter:150 mm
(or higher)
Light- four grade dimmer
adjusting system or better
mode
Lamp 0.2S, Color indication
automatic index: ≥97%,
Signature & Stamp of Bidder
Page 120 of 126
CUI-LHR-PUR-Tender-001
switching
time
12 Months from the
Warranty
date of installation
Operating Table for
surgical procedures on
Purpose small and medium sized
animals. Made of
Stainless steel 304.
Tabletop Equal to 60 x 22 in (or
dimensions higher)
Table height
Adjustable electronically adjustable
Operating Height ranging 28 to 40 inch or
51 02
Table betters
Durable stainless steel
Heated Top tabletop with electronic
heating system
Built-in drain hole at
Drain hole
the table top
Load Higher 120 Kg (or
capacity higher)
12 Months from the
Warranty
date of installation
Cages size(internal
dimensions): ~ 600mm x
~ 450mm x ~ 450 mm
(LXBXH)
Made of S.S 304
material with duly spot
welded and finished
joints
Each cage should be
Independent and
movable
AISI 304 quality
stainless steel material
Trolley with Fitted with tag holder
Rabbit
52 in built Gap between S.S rods 48
Cages
rabbit cages used in cage walls:
~7mm
Cage door with fixed
label holder and
arrangement for food
hopper and fixing water
bottle.
The door must be made
of wire mesh of ~2.5mm
and ~5mm SS rod
welded on a frame of
~5mm SS rod and
covered with 22 swg
Sheet.
Histology of preserved
Purpose
soft and hard tissue
Fully-Motorized/
Nature automated Microtome
with foot pedal
Automatic To instantly switch from
unlock manual to automatic
handwheel mode
As recommended by
UPS
OEM
As recommended by
computer
OEM
12 Months from
Warranty the date of
& Others installation
(parts and
i. Please submit the technical and financial bid (rates) on our prescribed BoQs Form and
clearly mention the quoted model / brands, with complete terms and conditions signed,
stamped with both bids, otherwise your bid (s) may be rejected.
ii. Lowest Vendor are required to provide the samples against the Sr. # 52 i.e.
(Trolley within built rabbit cages) before the bulk supply.
iii. Vendor will be responsible for Installation & Commissioning of the delivered equipment’s.
iv. Purchase / work order (s) will be awarded on Item wise Basis.
v. Kindly attach the Tender fee with Technical Bid and Bid money / CDR with Financial Bid.
vi. Multiple rates of an item may also lead to the rejection of bid / item.