Professional Documents
Culture Documents
BS A 308-1994 (2000) Iso 9255-1993
BS A 308-1994 (2000) Iso 9255-1993
Li cen sed Copy: Lon d on Sou th Ban k U n i versi ty, Lon d on Sou th Ban k U n i versi ty, Sat Dec 09 03: 33: 01 G M T+00: 00 2006, U n con trol l ed Copy, (c) BSI
IS O 92 5 5 : 1 993
MJ threads, metallic
material, coated or
uncoated, strength
equal to 1 1 0 0 MPa —
D imensions
UD C 62 1 . 882 . 2 1 : 62 9 . 7
BS A 308:1994
Li cen sed Copy: Lon d on Sou th Ban k U n i versi ty, Lon d on Sou th Ban k U n i versi ty, Sat Dec 09 03: 33: 01 G M T+00: 00 2006, U n con trol l ed Copy, (c) BSI
Ministry of Defence
Contents
Page
National foreword ii
1 Scope 1
2 Normative references 1
Figure 1 2
Table 1 3
© BSI 01 - 2 000 i
BS A 308:1 994
Li cen sed Copy: Lon d on Sou th Ban k U n i versi ty, Lon d on Sou th Ban k U n i versi ty, Sat Dec 09 03: 33: 01 G M T+00: 00 2006, U n con trol l ed Copy, (c) BSI
National foreword
This British Standard has been prepared under the direction of the Aerospace
Standards Policy Committee. It is identical with ISO 9255: 1 993 Aeros p ace —
Cross-references
ISO 286- 2: 1 988 BS EN 20286 ISO system of lim its and fits —
(Identical)
ISO 3353: 1 992 BS 2A 231 : 1 993 Rolled threads for b olts. Lead and
(Identical)
(Identical)
ISO 7403: 1 983 BS A 294: 1 984 Sp ecification for s p line driv e w renching
(Identical)
A British Standard does not purport to include all the necessary provisions of a
contract. Users of British Standards are responsible for their correct application.
Summary of pages
This document comprises a front cover, an inside front cover, pages i and ii,
pages 1 to 4, an inside back cover and a back cover.
This standard has been updated (see copyright date) and may have had
amendments incorporated. This will be indicated in the amendment table on the
inside front cover.
© BSI 01 - 2000
ii
BS A 308:1994
Li cen sed Copy: Lon d on Sou th Ban k U n i versi ty, Lon d on Sou th Ban k U n i versi ty, Sat Dec 09 03: 33: 01 G M T+00: 00 2006, U n con trol l ed Copy, (c) BSI
medium length MJ threads , in metallic material, IS O 7403 : 1 983 , Fasteners fo r aerosp ace
coated or uncoated, with s trength class es less than construction — Sp line driv e w renching
p roduct s tandards .
indicated b elow.
© BS I 0 1 - 2 00 0 1
Li cen sed Copy: Lon d on Sou th Ban k U n i versi ty, Lon d on Sou th Ban k U n i versi ty, Sat Dec 09 03: 33: 01 G M T+00: 00 2006, U n con trol l ed Copy, (c) BSI
2
BS A 308:1994
Figure 1
© BSI 01 - 2 000
BS A 308:1994
Li cen sed Copy: Lon d on Sou th Ban k U n i versi ty, Lon d on Sou th Ban k U n i versi ty, Sat Dec 09 03: 33: 01 G M T+00: 00 2006, U n con trol l ed Copy, (c) BSI
Table 1
D1
Coated bolts Uncoated bolts D2 D3 D4 D5 D6 D7 D8
Diameter
Thread a nom. tol. tol.
code
070 MJ7 × 1 – 4h6h 7 h12 b f7 b h12 b 4,9 5,2 9 11,3 12,1 1,4
1,9
–0,013
080 MJ8× 1 – 4h6h 8 –0,038
5,2 6,2 ± 0,5 10 12,8 13,6
L2 L3
H K L1 c P R1 S T Wrenching
Diameter Thread Thread
dash
code
+0,4 number d
min. h15 b nom. tol. short medium short medium nom. tol. 0 min.
080 1,6 8,6 4 to 80 11,5 16,5 7,5 10,5 6,3 3,7 3,9 100
100 2 10,1 5 to 100 14,5 20,5 9 13 7,7 0,8 4,7 4,2 120
0
120 2,4 11,4 6 to 120 16 22,5 10 14,5 8,8 0,9 –0,3 5,6 4,5 140
a In conformity with ISO 5855-2, except for the maximum major diameter “d” of bolts with a close tolerance on D1 , which shall be
equal to D1 min. – 0,025.
b See ISO 286-2.
c Increments:
1 for L1 u 30
2 for 30 < L1 u 100
4 for L1 > 100
If greater lengths are required, they shall be chosen using these increments.
d In conformity with ISO 7403 over T min.
© BSI 01-2000 3
Li cen sed Copy: Lon d on Sou th Ban k U n i versi ty, Lon d on Sou th Ban k U n i versi ty, Sat Dec 09 03: 33: 01 G M T+00: 00 2006, U n con trol l ed Copy, (c) BSI
4
blank
Li cen sed Copy: Lon d on Sou th Ban k U n i versi ty, Lon d on Sou th Ban k U n i versi ty, Sat Dec 09 03: 33: 01 G M T+00: 00 2006, U n con trol l ed Copy, (c) BSI
© BSI 01 - 2 000
List of references
BS A 308:1994
BS A 308:1994
Li cen sed Copy: Lon d on Sou th Ban k U n i versi ty, Lon d on Sou th Ban k U n i versi ty, Sat Dec 09 03: 33: 01 G M T+00: 00 2006, U n con trol l ed Copy, (c) BSI
ISO 9255:1993
BSI — British Standards Institution
BS I is the indep endent national b ody res p ons ib le for p rep aring
Britis h S tandards . It p res ents the UK view on s tandards in E urop e and at the
Revisions
Britis h S tandards should make s ure that they p oss es s the latest amendments or
editions .
It is the constant aim of BS I to imp rove the quality of our p roducts and services .
this Britis h S tandard would inform the S ecretary of the technical committee
res p ons ib le, the identity of which can b e found on the inside front cover.
BS I offers memb ers an individual up dating s ervice called PLUS which ens ures
Buying standards
BS I imp lementation of thos e that have b een p ub lis hed as Britis h S tandards,
Information on standards
international standards through its Lib rary and its Technical H elp to E xp orters
S ervice. Various BS I electronic information s ervices are also availab le which give
details on all its p roducts and s ervices . C ontact the Information C entre.
S ub s crib ing memb ers of BS I are kep t up to date with s tandards develop ments
and receive sub s tantial discounts on the p urchase p rice of s tandards. For details
Tel: 02 0 89 96 70 02 . Fax: 02 0 89 96 7 00 1 .
Copyright
p ermitted under the C op yright, D es igns and Patents Act 1 988 no extract may b e
This does not p reclude the free us e, in the cours e of imp lementing the standard,
of necess ary details such as s ymb ols, and size, typ e or grade designations. If thes e
details are to b e used for any other p urp os e than imp lementation then the p rior
If p ermis sion is granted, the terms may include royalty p ayments or a licensing
agreement. D etails and advice can b e ob tained from the C op yright Manager.
BS I
Tel: 02 0 89 96 70 7 0.
London
W4 4AL