Download as doc, pdf, or txt
Download as doc, pdf, or txt
You are on page 1of 2

AL BAWANI Co.

NEAR MISS REPORT

Ref. No. 24 Location: Package1, Part 1 Date/Time: 14-Jan-21/8:45 am

Description
As per mentioned date, time & location, carry out unsafe lifting with boom truck & used improper
lifting gear chain sling instead of web sling & D Shackle for lifting of sewerage pipes, also lift two
pipes together (approximately 15 inch diameter). During lifting was observed that lifting radios
area without barrier & out rigger pad was not place.

Included Hazard Identification and Risk Assessment report Yes No

HARM / DAMAGE COULD HAVE HAPPENED TO:

People Property Environment Material/ Equipment.

Immediate Causes

SUBSTANDARD ACTS/PRACTICES SUBSTANDARD CONDITIONS


Operating Equipment Without Authority Inadequate Guards or Barriers
Failure to Warn Inadequate or Improper Protective Equipment
Failure to Secure Defective Tools, Equipment or Materials
Operating at Improper Speed Congestion or Restricted Action
Making Safety Devices Inoperable Inadequate Warning System
Removing Safety Devices Fire and Explosion Hazards
Using Defective Equipment Poor Housekeeping, Disorder
Failing to Use PPE Properly Noise Exposure
Improper Loading Radiation Exposure
Improper Replacement Temperature Extremes
Improper Lifting Inadequate or Excess Illumination
Improper Position for Task Inadequate Ventilation
Others. (Shortcut/work overload)

Root cause

1- Lack of supervision
2- Necessary equipment and methodology not provided / implemented during the execution of the activity.
3- Lack of knowledge.

Comments/Recommendations By Immediate Supervisor:


1- Proper planning should be done prior to start excavation.
2- Correct use of equipment with specific TBT to be conducted by Site in charge.
3- Re-fresh training required for safe lifting & rigging techniques.

Name:___________________ Title:_____________________

Signature: __________________ Date: ___________________


AL BAWANI Co.
NEAR MISS REPORT

Pictures
Imbalance load &
lift two pipes
together.

Incorrect hooking &


used improper lifting
gear.

Out rigger pad was


not placed.

You might also like