Professional Documents
Culture Documents
Cat Data Link Circuit - Test: Troubleshooting
Cat Data Link Circuit - Test: Troubleshooting
Cat Data Link Circuit - Test: Troubleshooting
Page 1 of 6
Shutdown SIS
Previous Screen
Troubleshooting
3176C and 3196 Engines for Caterpillar Built Machines
Media Number -SENR9515-05 Publication Date -01/05/2007 Date Updated -08/05/2007
i02182948
The Cat Data Link is a two wire electrical connection that is used for communication between
electronic modules such as the engine Electronic Control Module (ECM), the machine control
module, electronic transmission controls, electronic dash displays, and Caterpillar Electronic
Technician (ET).
Illustration 1 g00813521
Schematic
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 12/12/2018
16H Motor Grader ATS00001-UP (MACHINE) POWERED BY 3196 Engine(SEBP3329... Page 2 of 6
B. Thoroughly inspect the J1/P1 ECM connector and all other connectors in the wiring harness.
Refer to Troubleshooting, "Electrical Connectors - Inspect" for details.
Note: Refer to the Electrical System Schematic for further information about the machine
wiring.
Expected Result:
All connectors, pins, and sockets are completely inserted and coupled. The harness and wiring are free
of corrosion, of abrasion, and of pinch points.
Results:
• Not OK -
Repair: Repair the circuit.Verify that the repair eliminates the problem.
STOP
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 12/12/2018
16H Motor Grader ATS00001-UP (MACHINE) POWERED BY 3196 Engine(SEBP3329... Page 3 of 6
Illustration 2 g00699950
ECM connector P1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 12/12/2018
16H Motor Grader ATS00001-UP (MACHINE) POWERED BY 3196 Engine(SEBP3329... Page 4 of 6
D. Measure the resistance between P1:8 (Cat Data Link +) and P1:9 (Cat Data Link −).
E. Measure the resistance between P1:8 (Cat Data Link +) and chassis ground.
F. Measure the resistance between P1:9 (Cat Data Link −) and chassis ground.
Expected Result:
Results:
Repair: Repair the circuit.Verify that the repair eliminates the problem.
STOP
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 12/12/2018
16H Motor Grader ATS00001-UP (MACHINE) POWERED BY 3196 Engine(SEBP3329... Page 5 of 6
Illustration 3 g00699950
ECM connector P1
A. Use a suitable piece of wire to short J62:D (Cat Data Link +) and J62:E (Cat Data Link −) at the
service tool connector.
B. Measure the resistance between P1:8 (Cat Data Link +) and P1:9 (Cat Data Link −).
C. Measure the resistance across the Cat Data Link at the other modules.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 12/12/2018
16H Motor Grader ATS00001-UP (MACHINE) POWERED BY 3196 Engine(SEBP3329... Page 6 of 6
Expected Result:
Results:
STOP
Repair: Repair the circuit.Verify that the repair eliminates the problem.
STOP
Copyright 1993 - 2018 Caterpillar Inc. Wed Dec 12 13:32:02 UTC+0800 2018
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 12/12/2018