Professional Documents
Culture Documents
Tank Radar Mac System
Tank Radar Mac System
The same type of PC is used as Work Station for both Saab TankRadar® MaC and
Saab TankRadar® G3.
A large 21" color monitor is included as standard on the MaC Work Station. The
large screen provides ample space for the mimic in the control windows of the Work
Station software.
The design of the operator´s interface in the MaC Work Station software is very
similar to that of Saab TankRadar® G3. In this way the operator can comfortably
switch between monitoring and control windows.
The control windows of the Work Station software contain mimic diagrams showing
tanks, pumps, valves, sensors etc. A standardized set of graphic symbols and
layouts are used to make the windows as clear and user-friendly as possible.
Following these standards, each of the control windows are specially made
according to the requirements of each customer.
You control a valve or a pump or any other controllable device by pressing the Light
Pen against its symbol on the Work Station´s screen with the Light Pen.
Hit the device´s symbol lightly with the Light Pen and a small control window is
opened, where you can enter the desired control setpoint of the device.
Technical Data for MaC Work Station
Computer Type approved PC
Monitor Saab TankRadar® Mac 21" monitor (Width x Height x Depth)
Operating System QNX
Power supply 115 VAC +10 to -15%, 47-63 Hz or
230 VAC +10 to -15%, 47-63 Hz
Dimensions
- PC, Monitor, mounting plate
- Keyboard 415 x 545 x 425 mm
Keyboard 470 x 40 x 195 mm
(Width x Height x Depth)
When two or more Work Stations are connected in a network, two of them can be
configured as masters and be connected to the Redundancy Box. If the active
master Work Station fails, the redundant master will automatically detect this and
take over control of the system.
The Redundancy Box switches the signal to the active master. The active master
has exclusive control over the Redundancy Box. Only one of the master Work
Stations is active at any one time. The redundant master Work Station works like any
slave Work Station until it detects that the active master has failed.
The same type of PC is used as Work Station for both Saab TankRadar® MaC and
Saab TankRadar® G3.
A large 21" color monitor is included as standard on the MaC Work Station. The
large screen provides ample space for the mimic in the control windows of the Work
Station software.
The design of the operator´s interface in the MaC Work Station software is very
similar to that of Saab TankRadar® G3. In this way the operator can comfortably
switch between monitoring and control windows.
The control windows of the Work Station software contain mimic diagrams showing
tanks, pumps, valves, sensors etc. A standardized set of graphic symbols and
layouts are used to make the windows as clear and user-friendly as possible.
Following these standards, each of the control windows are specially made
according to the requirements of each customer.
You control a valve or a pump or any other controllable device by pressing the Light
Pen against its symbol on the Work Station´s screen with the Light Pen.
Hit the device´s symbol lightly with the Light Pen and a small control window is
opened, where you can enter the desired control setpoint of the device.
Technical Data for MaC Work Station
Computer Type approved PC
Monitor Saab TankRadar® Mac 21" monitor (Width x Height x Depth)
Operating System QNX
Power supply 115 VAC +10 to -15%, 47-63 Hz or
230 VAC +10 to -15%, 47-63 Hz
Dimensions
- PC, Monitor, mounting plate
- Keyboard 415 x 545 x 425 mm
Keyboard 470 x 40 x 195 mm
(Width x Height x Depth)
Substation
• On/off switches.