Professional Documents
Culture Documents
TW Series - 22mm NEMA Style Pushbuttons: Key Features
TW Series - 22mm NEMA Style Pushbuttons: Key Features
TW Series - 22mm NEMA Style Pushbuttons: Key Features
Key features:
• TW NEMA Style Switches with snap-on contacts IDEC has your 22mm switching needs covered.
• Corrosion resistant octagonal chrome plated locking bezel Button styles include flush, extended, mushroom, or square and all bodies are
• Snap-on 10A contact blocks crafted from fracture-resistant nylon.
• LED illumination All illuminated units feature two lens styles, one that maximizes light dispersion,
• Slow make, double break, contacts the other accommodates direct lens engraving.
• Modular construction for maximum flexibility
Contact mechanism allow for a wide current rating, 5mA to 10A, which reduces
• Type 4X and IP65 watertight/oiltight panel the need for various contact materials.
Timers
Certificate No. CSA: pushbuttons and selector switches: A600 pilot lights and illuminated pushbuttons, direct supply pilot lights and illuminated pushbuttons with
File No. E68961 File No. LR21451 integral transformer (100/110, 115, 120, 200/220, 230, 240, 380, 400/440, 480V)
2030010305027380
UL: pushbuttons and selector switches: A600 pilot lights and illuminated pushbuttons, direct supply pilot lights and illuminated pushbuttons with
integral transformer (100/110, 115, 120, 200/220, 230, 240, 380, 400/440, 480V)
TÜV: pushbuttons and selector switches: A600=P600 (NO, NC)/Q600 (NO-EM, NC-LB) pilot lights and illuminated pushbuttons, direct supply pilot
lights and illuminated pushbuttons with integral transformer (100/110, 115, 120, 200/220, 230, 240, 380, 400/440, 480V)
Signaling Lights
Registration No: J9551803 (All other switches)
Registration No: J9551804 (Pilot Lights)
Operating Temperature Operation: –25 to +50°C (without freezing), Storage: –40 to +80°C (without freezing)
Vibration Resistance 5 to 55Hz, 100m/sec2 (10g) conforming to IEC6068-2-6
Shock Resistance 1000m/sec2 (100g) conforming to IEC6068-2-7
Electric Shock Protection Class 2 conforming to IEC60664-7
Degree of Protection IP65 from front of the panel; (IP54 for key switches)
(conforming to IEC60529) IP20 (Type HW-U contact block)
(conforming to NEMA ICS6-110) Type 1, 2, 3, 3R, 3S, 4, 4X, 5, 12, 13 (Type 1, 2, 3R, 5, 12, 13 for key switches)
Momentary pushbuttons: 5,000,000 (1800 operations per hour)
Mechanical Life All other switches: 500,000
Timers
HW-U Contact Block ø1.7 to 2.0 mm (AWG12) 1 1.2 to 1.3 M3.5
Recommended Terminal Torque 0.3 to 2.0 mm2 (AWG14 to 22) 2 1.0 to 1.3
Stranded Wire
2.1 to 3.5 mm2 (AWG12) 1 1.2 to 1.3
Crimping Terminal
Illuminated Unit (*1) Solid Wire ø0.5 to 1.6 mm (AWG14 to 22) 2 1.0 to 1.3 M3.5
Stranded Wire 0.3 to 2.0 mm (AWG14 to 22)
Crimping Terminal
0.6 to 1.0 (M3.0)
Applicable Wire Size Pilot Light Solid Wire ø0.5 to 1.6 mm (AWG14 to 22) 2
1.0 to 1.3 (M3.5)
Stranded Wire ø0.3 to 2.0 mm (AWG14 to 22)
1. * refers to the lamp terminals of the illuminated push buttons and selector switches.
Contactors
External Short-Circuit Protection 10A 250V fuse conforming to IEC60269-1
Lamp Ratings LEDs: 6V: 17mA max, 12/24V: 11mA max, 120/240V: 10mA max
Horsepower Rating 1/4 HP @ 120V (single-phase, non-reversing motor); 1 HP @ 240V (3 phase, non-reversing motor)
Terminal Blocks
Contact Material Silver
AC-12 Control of resistive loads and solid state loads 10A — 10A 10A 6A 2A
AC50/60Hz
AC-15 Control of electromagnetic loads (> 72VA) 10A — 7A 5A 3A 1A
Operational Current
DC-12 Control of resistive loads and solid state loads 10A 5A — 2.2A 1.1A —
DC
DC-13 Control of electromagnets 5A 2A — 1.1A 0.6A —
1904032203
800-262-IDEC (4332) • USA & Canada 697
Switches & Pilot Devices ø22mm - TW Series Switches & Pilot Devices
Assembled Pushbuttons
A B ( ) W 1 10 – B
Bezel Shape
Blank: Octagonal
F: Full Shroud
Contact Arrangement
G: Mushroom Shroud
Q: Square 10: 1NO 01: 1NC
20: 2NO 02: 2NC
11: 1NO-1NC 22: 2NO-2NC
Contactors
Button Shape
1: Flush
2: Extended
3: Mushroom Head Ø 29mm
4: Mushroom Head Ø 40mm
Series Designation
Terminal Blocks
W: TW Series
To be used for interpreting part numbers only, not for part number development.
Circuit Breakers
Signaling Lights
1NC ABW201-j AOW201-j White W
Extended 1NO-1NC ABW211-j AOW211-j
2NO ABW220-j AOW220-j
2NC ABW202-j AOW202-j
Timers
1NO ABW410-j AOW410-j
1NC ABW401-j AOW401-j
Ø 40mm
1NO-1NC ABW411-j AOW411-j
Mushroom Head
2NO ABW420-j AOW420-j
2NC ABW402-j AOW402-j
Contactors
with Full Shroud 2NO ABGW420-j AOGW420-j
2NC ABGW402-j AOGW402-j
Terminal Blocks
1NC ABQW201-j AOQW201-j
Square Extended 1NO-1NC ABQW211-j AOQW211-j
2NO ABQW220-j AOQW220-j
2NC ABQW202-j AOQW202-j
1NO AKW210
1NC AKW201
Keylock Push On/
1NO-1NC AKW211 –
Off
2NO AKW220
2NC AKW202
Circuit Breakers
1904032203
800-262-IDEC (4332) • USA & Canada 699
Switches & Pilot Devices ø22mm - TW Series Switches & Pilot Devices
Dummy
Relays & Sockets
HW-DB
Round Extended Block
Round with Full
Shroud/Recessed 1. Dummy blocks (no contacts) are used with an odd
ABW2B-j
number of contact blocks.
2. Use of early and late break contacts creates a make
ABFW-200 AOFW-200
before break function
Ø 29mm Mushroom
j Button Color Codes
Ø 40mm, Ø 29mm
Color Code
Mushroom Head ABW3B-j
Black B
Timers
Square Flush
ABQW1B-j
Square Flush/Extended
ABQW-100 AOQW-100
Square Extended
Terminal Blocks
— AKW-200
In place of j specify the button color code from table
Circuit Breakers
Signaling Lights
To be used for interpreting part numbers only, not for part number development.
Timers
X: Pushlock Key Reset 12V: 12V AC/DC
24V: 24V AC/DC
Illumination 120V: 120V AC
240V: 240V AC
Blank: None
L: Illuminated
Button/Lens Color
Series Designation A: Amber R: Red W: White
G: Green S: Blue Y: Yellow
W: TW Series B: Black
Contactors
Button/Lens Size
3: 29mm Mushroom
4: 40mm Mushroom
Terminal Blocks
Blank: Standard (ribbed)
B: Engravable (smooth with insert)
Contact Arrangement
Illuminated Circuit 10: 1NO 01: 1NC
(illuminated unit only) 20: 2NO 02: 2NC
99: Full Voltage (LED determines voltage) 11: 1NO/1NC 22: 2NO/2NC
126: 120V AC Step Down Transformer
246: 240V AC Step Down Transformer
486: 480V AC Step Down Transformer
Circuit Breakers
1904032203
800-262-IDEC (4332) • USA & Canada 701
Switches & Pilot Devices ø22mm - TW Series Switches & Pilot Devices
Yellow Y
1NC AVW301-R*
Ø 29mm Pushlock
1NO-1NC AVW311-R*
Turn Reset*
2NO AVW320-R* k LED/Lens Color Codes
2NC AVW302-R*
Color Code
White W
1NO AXW410- R*
1NC AXW401- R* l Full Voltage Codes
Ø 40mm Pushlock
1NO-1NC AXW411- R*
Key Reset * Voltage Code
2NO AXW420- R*
2NC AXW402- R* 6V AC/DC 6V
2NC AVLW49902D-R*-l
1NO-1NC AVLW3m11D-R*
Transformer 2NO AVLW3m20D-R*
Ø 29mm Pushlock 2NC AVLW3m02D-R*
Turn Reset 1NO-1NC AVLW39911D-R*-l
Full Voltage 2NO AVLW39920D-R*-l
2NC AVLW39902D-R*-l
1NO-1NC AYLW4 m 11D-k
Terminal Blocks
Signaling Lights
*Not applicable for full voltage units
Timers
AYW4B-j Red R
Blue S
AXW-300 —
White W
Contactors
Amber A
Green G
1. *Available in Red only
2. In place of j, specify the button color code from table. Red R
Blue S
White W
Terminal Blocks
Circuit Breakers
1904032203
800-262-IDEC (4332) • USA & Canada 703
Switches & Pilot Devices ø22mm - TW Series Switches & Pilot Devices
240V AC TW-F246B
AVLW3LU-R* AVLW3BLU-R* Finger-Safe
480V AC TW-F486B
Signaling Lights
For use
AVLW4LU-R* AVLW4BLU-R* Dummy Block with with odd
Finger-Safe HW-DA1FBN
Full Voltage Adaptor number of
contacts.
For use
Ø 40mm Head Push Pull with even
Full Voltage Adaptor Finger-Safe TW-DA1FB
number of
contacts.
AYLW4LU-k AYLW4BLU-k
Relays & Sockets
1. In place of k, specify the lens color code from table on previous page. Contact Blocks
2. *Available only in red
Style Contacts 1NO 1NC
3. Standard lenses have ribbed pattern, Engravable lenses are smooth and include an
engravable insert.
Finger- HW-U10-F HW-U01-F
Safe
Spring-Up
Lamp Circuit Components Terminal
HW-U10R-F HW-U01R-F
(early make) (late break)
Style Application Part Number
Timers
Lead Holder
Used with TW-LH2
Contactors
Signaling Lights
Relays & Sockets
Assembled Pilot Lights
Timers
6V: 6V AC/DC
Bezel Shape 12V: 12V AC/DC
24V: 24V AC/DC
Blank: Octagonal (round lenses) 120V: 120V AC
Q: Square 240V: 240V AC
Contactors
G: Green
Lens Shape R: Red
1: Flat S: Blue
2: Dome W: White
Y: Yellow
Lens Type
Lamp
Blank: Standard (ribbed)
B: Engravable (smooth with insert included) D: LED
Terminal Blocks
Illumination Circuit
99: Full Voltage (lamp determines voltage)
126: 120V AC Step Down Transformer
246: 240V AC Step Down Transformer
486: 480V AC Step Down Transformer
1. Use only when interpreting part numbers. Do not use for developing part numbers.
Circuit Breakers
1904032203
800-262-IDEC (4332) • USA & Canada 705
Switches & Pilot Devices ø22mm - TW Series Switches & Pilot Devices
Signaling Lights
* Transformer not required for full voltage units.
Timers
transformer completed units.
Contactors
APW2LU-k —
Round Flat
APW1LU-k APW1BLU-k
— APQW1BLU-k
engravable insert.
1904032203
800-262-IDEC (4332) • USA & Canada 707
Switches & Pilot Devices ø22mm - TW Series Switches & Pilot Devices
1. Use only when interpreting part numbers. Do not use for developing part numbers.
2. Transformers step down to 6V.
Signaling Lights
White W
1NO-1NC ALW29911D-k-l AOLW29911D-k-l Yellow Y
Full Voltage 2NO ALW29920D-k-l AOLW29920D-k-l 1. Mushroom lenses not
2NC ALW29902D-k-l AOLW29902D-k-l available in yellow.
2. Yellow pushbutton comes
with white LED.
Extended Lens with Full Shroud 1NO-1NC ALFW2 m 11D-k AOLFW2 m 11D-k
l Full Voltage Codes
Transformer 2NO ALFW2 m 20D-k AOLFW2 m 20D-k
2NC ALFW2 m 02D-k AOLFW2 m 02D-k Voltage Code
Timers
120VAC 126
1NO-1NC ALW39911D-k-l AOLW39911D-k-l 240VAC 246
Full Voltage 2NO ALW39920D-k-l AOLW39920D-k-l
2NC ALW39902D-k-l AOLW39902D-k-l 480VAC 486
Transformers step down to 6V
(use 6V LED).
ø40mm Mushroom Button
1NO-1NC ALW4 m 11D-k AOLW4 m11D-k
Transformer 2NO ALW4 m 20D-k AOLW4 m20D-k
2NC ALW4 m 02D-k AOLW4 m 02D-k
Contactors
1NO-1NC ALW49911D-k-l AOLW49911D-k-l
Full Voltage 2NO ALW49920D-k-l AOLW49920D-k-l
2NC ALW49902D-k-l AOLW49902D-k-l
Square Extended
1NO-1NC ALQW2B m11D-k AOLQW2B m11D-k
Transformer 2NO ALQW2B m20D-k AOLQW2B m20D-k
Terminal Blocks
2NC ALQW2B m02D-k AOLQW2B m02D-k
1. In place of k, specify the Lens Color Code (see table). Mushroom lenses not available in yellow.
2. In place of l, specify the Full Voltage Code (lamp voltage) (see table).
3. In place of m, specify the Transformer Voltage Code (see table).
Circuit Breakers
1904032203
800-262-IDEC (4332) • USA & Canada 709
Switches & Pilot Devices ø22mm - TW Series Switches & Pilot Devices
Operators Lamps
Part Number Style Voltage Part Number
Style
Momentary Maintained 6V AC/DC LSTD-6k
LED
12V AC/DC LSTD-1k
24V AC/DC LSTD-2k
Extended ALW-0600 AOLW-0600
120V AC LSTD-H2k
240V AC LSTD-M4k
Relays & Sockets
Lead Holder
Used with TW-LH2
Lenses holder when using four
HW-LH3
Part Number contact blocks and
Style transformer
Standard Engravable
Contactors
ø 40mm
ALW4LU-k ALW4BLU-k
Mushroom Head*
1. In place of k, specify the lens color code from table on the bottom right.
2. *Mushroom lens not available in yellow.
3. Standard lenses have ribbed pattern, Engravable lenses are smooth and include an
engravable insert.
Dummy
HW-DB 480V AC TW-F486B
Signaling Lights
Block
For use
1. Dummy blocks (no contacts) are used with an odd number of contact blocks. Dummy Block with with odd
2. Use of early and late break contacts creates a make before break function Finger-Safe HW-DA1FBN
Full Voltage Adaptor number of
contacts.
For use
with even
Full Voltage Adaptor Finger-Safe TW-DA1FB
number of
contacts.
Timers
Contactors
Terminal Blocks
Circuit Breakers
1904032203
800-262-IDEC (4332) • USA & Canada 711
Switches & Pilot Devices ø22mm - TW Series Switches & Pilot Devices
1. Use only when interpreting part numbers. Do not use for developing part numbers.
2. Custom contact configurations available.
3. Custom key removable codes available.
4. Portions of part number inside ( ) are optional.
Circuit Breakers
L R L L
R R L R
Signaling Lights
1NO Lever ASW2L10 ASW21L10 ASW22L10
2 O O
Key ASW2K10 ASW21K10 ASW22K10
Knob ASW201-116 ASW2101-116 ASW2201-116
1 X O
1NC Lever ASW2L01-116 ASW21L01-116 ASW22L01-116
2 O O
Key ASW2K01-116 ASW21K01-116 ASW22K01-116
Knob ASW211 ASW2111 ASW2211
1NO 1 X O
Lever ASW2L11 ASW21L11 ASW22L11
1NC 2 O X
Key ASW2K11 ASW21K11 ASW22K11
Knob ASW220 ASW2120 ASW2220
1 O X
Timers
2NC 3 X O
Key ASW2K22-111 ASW21K22-111 ASW22K22-111
4 X O
Contactors
Terminal Blocks
Circuit Breakers
1904032203
800-262-IDEC (4332) • USA & Canada 713
Switches & Pilot Devices ø22mm - TW Series Switches & Pilot Devices
L C R C C C C
L R L R L R L R
2NO 2 X O
Lever ASW3L22-309 ASW31L22-309 ASW32L22-309 ASW33L22-309
2NC 3 O X O
Key ASW3K22-309 ASW31K22-309 ASW32K22-309 ASW33K22-309
4 O O X
1 O X O
Knob ASW322-310 ASW3122-310 ASW3222-310 ASW3322-310
2NO 2 O O X
Lever ASW3L22-310 ASW31L22-310 ASW32L22-310 ASW33L22-310
2NC 3 O X O
Key ASW3K22-310 ASW31K22-310 ASW32K22-310 ASW33K22-310
4 O O X
1 X O O
Knob ASW340 ASW3140 ASW3240 ASW3340
2 O O X
4NO Lever ASW3L40 ASW31L40 ASW32L40 ASW33L40
3 X O O
Key ASW3K40 ASW31K40 ASW32K40 ASW33K40
4 O O X
X
Timers
1 O X
Knob ASW304 ASW3104 ASW3204 ASW3304
2 X X O
4NC Lever ASW3L04 ASW31L04 ASW32L04 ASW33L04
3 O X X
Key ASW3K04 ASW31K04 ASW32K04 ASW33K04
4 X X O
1. The truth table indicates the operating position of contact block when the operator is switched to that position.
X = On (closed contacts)
O = Off (open contacts)
X X = Overlapping Contacts: Remain on (closed contacts) when switch is moved between these two positions.
2. All knob and lever selector switches come in black. Other colors are available by ordering the knob or lever separately.
3. Every key selector switch uses an identical key. The key is removable in any maintained position.
Contactors
Mounting
Contact
Contact
2 2 3 3
1 3 4 1 2 4 5 2 4
1 3
1 5
Terminal Blocks
1 X O O O 1 X O O O O
2NO 2 O X O O Knob ASW422-411 2NO 2 O X O O O Knob ASW522-501
2NC 3 O O X O Lever ASW4L22-411 2NC 3 O O O X O Lever ASW5L22-501
4 O O O X 4 O O O O X
Circuit Breakers
Signaling Lights
Operators Handles and Inserts
Style Positions Description Part Number Style Part Number
Maintained ASW200
2 Spring return from right ASW2100
Knob ASWHHY-j
Spring return from left ASW2200
Maintained, Cam 1 ASW300-1
Knob/Lever
Maintained, Cam 2 ASW300-2
Timers
Maintained ASW2K00
2 Spring return from right ASW21K00
Key Contact Blocks
Spring return from left ASW22K00
Style Contacts 1NO 1NC
Maintained, Cam 1 ASW3K00-1
Maintained, Cam 2 ASW3K00-2 HW-U10-F HW-U01-F
Maintained, Cam 3 ASW3K00-3
Finger-
Spring return from right, Cam 1 ASW31K00-1 Safe
Contactors
3 Spring return from right, Cam 2 ASW31K00-2 Spring-Up HW-U10R-F HW-U01R-F
Spring return from left, Cam 1 ASW32K00-1 Terminal (early make) (late break)
Spring return from left, Cam 2 ASW32K00-2
Spring return from left/right, Cam 1 ASW33K00-1
Spring return from left/right, Cam 2 ASW33K00-2
Dummy
1. Two keys are supplied with every key switch, all are keyed alike, and removable from any maintained position.
HW-DB
Block
2. Locking rings are included with all operators. Order knobs, levers, and color inserts separately.
3. Different cams produce different contact actions. For details, see page 720.
Terminal Blocks
4. Key switch operator supplied with black sleeve. 1. Push rod color code:
Green = NO contact block
Red = NC contact block.
j Handle/Insert Color Codes Replacement Parts 2. Dummy blocks (no contacts) are used with an odd
Color Code Key Switch Black Sleeve AKW2B-B number of contact blocks.
Black* B
Blue S
Green G
Red R
Circuit Breakers
Yellow Y
White† W
*Color inserts not available in black.
†
Knob and lever not available in white.
1904032203
800-262-IDEC (4332) • USA & Canada 715
Switches & Pilot Devices ø22mm - TW Series Switches & Pilot Devices
Contact Arrangement
10: 1NO 01: 1NC
20: 2NO 02: 2NC
40: 4NO 04: 4NC
11: 1NO-1NC 22: 2NO-2NC
Circuit Breakers
1. Use only when interpreting part numbers. Do not use for developing part numbers.
2. All transformers step down to 6V (use 6V lamp).
Position
Contact
Lamp
240VAC 246
L R Circuit Type L R L R L R
480VAC 486
1NO 1 O X Transformer ASLW2 j 11D-k ASLW21 j 11D-k ASLW22 j 11D-k Transformers step down to 6V
1NC 2 X O Full Voltage ASLW29911D-k-l ASLW219911D-k-l ASLW229911D-k-l (use 6V LED).
Signaling Lights
1 O X Transformer ASLW2 j 20D-k ASLW21 j 20D-k ASLW22 j 20D-k
2NO
2 O X Full Voltage ASLW29920D-k-l ASLW219920D-k-l ASLW229920D-k-l k LED/Lens Color Codes
1 X O Transformer ASLW2 j 02D-104-k ASLW21 j 02D-104-k ASLW22 j 02D-104-k
2NC Color Code
2 X O Full Voltage ASLW29902D-104-k-l ASLW219902D-104-k-l ASLW229902D-104-k-l
Amber A
1 O X
2NO 2 X O Transformer ASLW2 j 22D-k ASLW21 j 22D-k ASLW22 j 22D-k Green G
2NC 3 O X Full Voltage ASLW29922D-k-l ASLW219922D-k-l ASLW229922D-k-l Red R
4 X O
Blue S
C Lamp
L R C C C C
Circuit Type L R L R L R L R
Timers
2NC
2 X X O Full Voltage ASLW39902D-k-l ASLW319902D-k-l ASLW329902D-k-l ASLW339902D-k-l
1 X O O
2NO 2 O O X Transformer ASLW3 j 22D-k ASLW31 j 22D-k ASLW32 j 22D-k ASLW33 j 22D-k
2NC 3 O X X Full Voltage ASLW39922D-k-l ASLW319922D-k-l ASLW329922D-k-l ASLW339922D-k-l
4 X X O
1 X O X
2NO 2 X X O Transformer ASLW3 j 22D-309-k ASLW31 j 22D-309-k ASLW32 j 22D-309-k ASLW33 j 22D-309-k
2NC 3 O X O Full Voltage ASLW39922D-309-k-l ASLW319922D-309-k-l ASLW329922D-309-k-l ASLW339922D-309-k-l
4 O O X
Contactors
1 O X O
2NO 2 O O X Transformer ASLW3 j 22D-310-k ASLW31 j 22D-310-k ASLW32 j 22D-310- k ASLW33 j 22D-310-k
2NC 3 O X O Full Voltage ASLW39922D-310-k-l ASLW319922D-310-k-l ASLW329922D-310- k -l ASLW339922D-310-k-l
4 O O X
1 X O O
2 O O X Transformer ASLW3 j 40D-k ASLW31 j 40D-k ASLW32 j 40D-k ASLW33 j 40D-k
4NO
3 X O O Full Voltage ASLW39940D-k-l ASLW319940D-k-l ASLW329940D-k-l ASLW339940D-k-l
4 O O X
Terminal Blocks
1 O X X
2 X X O Transformer ASLW3 j 04D-k ASLW31 j 04D-k ASLW32 j 04D-k ASLW33 j 04D-k
4NC
3 O X X Full Voltage ASLW39904D-k-l ASLW319904D-k-l ASLW329904D-k-l ASLW339904D-k-l
4 X X O
1904032203
800-262-IDEC (4332) • USA & Canada 717
Switches & Pilot Devices ø22mm - TW Series Switches & Pilot Devices
Operators Lamps
Style Positions Description Part Number Style Voltage Part Number
Relays & Sockets
White W
Lenses (Knobs) Yellow Y
Style Part Number Yellow LED not available. Use
white LED
Knob ASLWLU-k
Terminal Blocks
Dummy
HW-DB 480V AC TW-F486B
Signaling Lights
Block
For use
1. Dummy blocks (no contacts) are used with an odd number of contact blocks. Dummy Block with with odd
2. Use of early and late break contacts creates a make before break function Finger-Safe HW-DA1FBN
Full Voltage Adaptor number of
contacts.
For use
Lamp Circuit Components with even
Full Voltage Adaptor Finger-Safe TW-DA1FB
Style Application Part Number number of
contacts.
Timers
Lead Holder
Used with TW-LH2
holder when using four
HW-LH3
contact blocks and full
size transformer
Contactors
Terminal Blocks
Circuit Breakers
1904032203
800-262-IDEC (4332) • USA & Canada 719
ø22mm - TW Series Switches & Pilot Devices
R
Switches & Pilot Devices
L R L L
R R
2NO 4 X O HW-U01-F
2NC 1 O X HW-U10-F
4 X O HW-U01-F
1. NO-EM, NC-LB = Early Make, Late Break.
N/D = No circuit number designation required in assembled selector switch part number.
2. X = On (closed contacts) O = Off (Open contacts)
Signaling Lights
1 0 X X HW-U01-F Knob/Lever ASW300-1 ASW3100-1 ASW3200-1 ASW3300-1
203 Key ASW3K00-1 ASW31K00-1 ASW32K00-1 ASW33K00-1
1NO 2 O 0 X HW-U10-F Illuminated Knob ASLW300-1 ASLW3100-1 ASLW3200-1 ASLW3300-1
1NC 1 X 0 X HW-U10-F Knob/Lever ASW300-2 ASW3100-2 ASW3200-2 ASW3300-2
302 Key ASW3K00-2 ASW31K00-2 ASW32K00-2 ASW33K00-2
2 X X O HW-U01-F Illuminated Knob ASLW300-2 ASLW3100-2 ASLW3200-2 ASLW3300-2
Timers
N/D Key ASW3K00-1 ASW31K00-1 ASW32K00-1 ASW33K00-1
2 X X O HW-U01-F Illuminated Knob ASLW300-1 ASLW3100-1 ASLW3200-1 ASLW3300-1
1 X 0 0 HW-U10-F
2 0 0 X HW-U10-F Knob/Lever ASW300-1 ASW3100-1 ASW3200-1 ASW3300-1
N/D Key ASW3K00-1 ASW31K00-1 ASW32K00-1 ASW33K00-1
3 0 X X HW-U01-F Illuminated Knob ASLW300-1 ASLW3100-1 ASLW3200-1 ASLW3300-1
4 X X 0 HW-U01-F
1 0 X X HW-U01-F
Contactors
2 0 0 X HW-U10-F Knob/Lever ASW300-1 ASW3100-1 ASW3200-1 ASW3300-1
210 Key ASW3K00-1 ASW31K00-1 ASW32K00-1 ASW33K00-1
3 0 X X HW-U01-F Illuminated Knob ASLW300-1 ASLW3100-1 ASLW3200-1 ASLW3300-1
4 0 0 X HW-U10-F
1 X 0 X HW-U10-F
2 X X 0 HW-U01-F Knob/Lever ASW300-2 ASW3100-2 ASW3200-2 ASW3300-2
2NO
308 Key ASW3K00-2 ASW31K00-2 ASW32K00-2 ASW33K00-2
2NC 3 X 0 X HW-U10-F Illuminated Knob ASLW300-2 ASLW3100-2 ASLW3200-2 ASLW3300-2
4 X X O HW-U01-F
1 X 0 X HW-U10-F Terminal Blocks
2 X X 0 HW-U01-F Knob/Lever ASW300-2 ASW3100-2 ASW3200-2 ASW3300-2
309 Key ASW3K00-2 ASW31K00-2 ASW32K00-2 ASW33K00-2
3 0 X O HW-U01-F Illuminated Knob ASLW300-2 ASLW3100-2 ASLW3200-2 ASLW3300-2
4 O 0 X HW-U10-F
1 0 X O HW-U01-F
2 O 0 X HW-U10-F Knob/Lever ASW300-2 ASW3100-2 ASW3200-2 ASW3300-2
310 Key ASW3K00-2 ASW31K00-2 ASW32K00-2 ASW33K00-2
3 0 X O HW-U01-F Illuminated Knob ASLW300-2 ASLW3100-2 ASLW3200-2 ASLW3300-2
Circuit Breakers
4 0 0 X HW-U10-F
1. Each operator sub-assembly is available as a “-1” and a “-2” for 3-position selector switches. The internal cam of a “-1” is different from that of a “-2”. This results in designated combinations of open
and closed contacts in the various operator positions.
2. N/D = No circuit number designation required in assembled part number.
3. X = On (closed contacts) O = Off (open contacts). X-X Overlapping contacts remain on (closed) when switch is moved between these two positions.
1904032203
800-262-IDEC (4332) • USA & Canada 721
Switches & Pilot Devices ø22mm - TW Series Switches & Pilot Devices
1 X 0 0 HW-U10-F
2 0 0 X HW-U10-F Knob/Lever ASW300-1 ASW3100-1 ASW3200-1 ASW3300-1
N/D Key ASW3K00-1 ASW31K00-1 ASW32K00-1 ASW33K00-1
3 X 0 0 HW-U10-F
Signaling Lights
1. Each operator sub-assembly is available as a “-1” and a “-2” for 3-position selector switches. The internal cam of a “-1” is different from that of a “-2”. This results in designated combinations of open
and closed contacts in the various operator positions.
2. N/D = No circuit number designation required in assembled part number.
Timers
3. X = On (closed contacts) O = Off (open contacts). X-X Overlapping contacts remain on (closed) when switch is moved between these two positions.
Contactors
Terminal Blocks
Circuit Breakers
Signaling Lights
Step 2
How many contacts should there be?
# of isolated contacts
(maximum 6)
Step 3
Knob Position
1 2 3 4 5
1
2
Contacts
3
4
Timers
5
6
Step 4
If building a 2 position selector, skip this step. (2 position selectors have only one cam)
If building a 3, 4, or 5 position selector, determine appropriate cam as follows:
• Look at Row 1 from above table and locate an identical row in the operator truth tables (See next page).
Contactors
• Repeat for all rows. The user must find one operator that contains all rows from above table.
• Record the operator cam version.
Step 5
Build by placing appropriate contact in appropriate mounting position for each desired row on operator cam truth table. “L” and “R” refer to mounting on left or right
side of operator as viewed from the front of the panel.
Step 6
Develop an assembly part number (if necessary) as follows: follow standard numbering nomenclature for selector switches (see pages 712 or 716. In place of the Terminal Blocks
“Circuit Number” indicate the cam number and contact arrangement as such ASW322-3-OELCSS, where “3” is the cam number, and contact arrangement “OELCXX”
calls out individual contact mounting locations in order (see diagram above). O=NO, C=NC, E=NO-EM, L=NC-LB, X= no contact. Part number must designate all 6 pos-
sible mounting locations.
Caution: Before putting any custom selector switch into use, the user should use an ohmmeter to test for desired performance.
1. For Operator Truth Tables, see next page.
Circuit Breakers
1904032203
800-262-IDEC (4332) • USA & Canada 723
Switches & Pilot Devices ø22mm - TW Series Switches & Pilot Devices
HW-U01-F L X O (NC) R X O X X
ASW200 (NC) R X O ASW400
ASLW200 HW-U10R-F L X O O O
ASW2K00 HW-U10R-F L O X (NO-EM) R O X O O
(NO-EM) R O X
HW-U01R-F L O X X X
HW-U01R-F L X O (NC-LB) R X O X X
(NC-LB) R X O
Position 1 2 3 4
Mounting Operator Position
Contact HW-U10-F L X O O O
Position Left Center Right
(NO) R O O O X
HW-U10-F L X O O
HW-U01-F L O O X O
(NO) R O O X
(NC) R O X O O
HW-U01-F L O X X ASW400-1
HW-U10R-F L X X O X
ASW300-1 (NC) R X X O
ASW3K00-1 (NO-EM) R X O X X
ASLW300-1 HW-U10R-F L X O O
HW-U01R-F L O X X X
(NO-EM) R O O X (NC-LB) R X X X O
Timers
HW-U01R-F L O X X
(NC-LB) R X X O 5 Position Selector Switches
Mounting Operator Position
Operator Position Contact
Mounting Position 1 2 3 4 5
Contact
Position Left Center Right
HW-U10-F L X O O O O
HW-U10-F L X O X (NO) R O X O O O
(NO) R O O X
HW-U01-F L O O X X X
Contactors
HW-U01-F L O X O (NC) R O O O X X
ASW300-2 (NC) R X X O ASW500
HW-U10R-F L X O O O O
ASW3K00-2
ASLW300-2 HW-U10R-F L X O X (NO-EM) R O X O O O
(NO-EM) R O O X
HW-U01R-F L O X X X X
HW-U01R-F L O X O (NC-LB) R X O X X X
(NC-LB) R X X O
Operator Position
Terminal Blocks
Mounting
Operator Position Contact
Mounting Position 1 2 3 4 5
Contact
Position Left Center Right
HW-U10-F L X O O O O
HW-U10-F L X O O (NO) R O O O O X
(NO) R O O X
HW-U01-F L O O O X O
HW-U01-F L O X O (NC) R O X O O O
ASW300-3 (NC) R O X O ASW500-1
HW-U10R-F L X X X O X
ASW3K00-3
ASLW300-3 HW-U10R-F L X O X (NO-EM) R X O X X X
Circuit Breakers
(NO-EM) R X O X
HW-U01R-F L O X X X X
HW-U01R-F L O X X (NC-LB) R X X X X O
(NC-LB) R X X O
(25mm)
0.975"
1.76" (45mm)
1.0"
ø70mm
Signaling Lights
(14.5mm)
0.566"
Part Number
Nameplate NWAL-OB (black) NWAQL-OB (black)
NWAS-OB NWAR-O
(blank) NWAL-OR (red) NWAQL-OR (red)
Nameplate
NWAL-j NWAQL-j NWAS-j NWAR-27†
(engraved)
Timers
DOWN 103 RAISE 118 DOWN-UP 203 DOWN-OFF-SLOW 304
EMERG.STOP 104 RESET 119 FAST-SLOW 204 FAST-OFF-SLOW 305
REV-FOR 216
FAST 105 REVERSE 120 FOR-REV 205 FOR-OFF-REV 306
RUN-JOG 217
FORWARD 106 RUN 121 HAND-AUTO 206 LEFT-OFF-RIGHT 307
RUN-SAFE 218
HAND 107 SLOW 122 HIGH-LOW 207 LOWER-OFF-RAISE 308
SAFE-RUN 219
HIGH 108 START 123 JOG-RUN 208 OFF-MAN-AUTO 309
SLOW-FAST 220
IN 109 STOP 124 LEFT-RIGHT 209 OFF-SLOW-FAST 310
START-STOP 221
INCH 110 STOP 125 LOWER-RAISE 210 OFF-1-2 311
STOP-START 222
JOG 111 TEST 126 MAN-AUTO 211 OPEN-OFF-CLOSE 312
UP-DOWN 223
LOW 112 UP 127 OFF-ON 212 SLOW-OFF-FAST 313
Contactors
LOWER 113 I (Int’l On) 150 ON-OFF 213 SUMMER-OFF-WINTER 314
OFF 114 O (Int’l Off) 151 OPEN-CLOSE 214 UP-OFF-DOWN 315
ON 115 EMO 152 RAISE-LOWER 215 1-OFF-2 316
HAND-OFF-AUTO 317
Terminal Blocks
Nameplate Order Form on next page.
Circuit Breakers
1904032203
800-262-IDEC (4332) • USA & Canada 725
Switches & Pilot Devices ø22mm - TW Series Switches & Pilot Devices
Copy this order form and use it to specify Letter Height, Custom Engravings, Location of Engraving on Nameplate, and Quantity Desired.
To ensure engraving accuracy, fax it to your IDEC representative. or Distributor.
Engraving Location B
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Step 2. Step 3.
Specify Quantity. Specify Location. Sample Letter Sizes
Circuit Breakers
Copy this order form and use it to specify Letter Height, Maximum Number of Lines and Text to be engraved.
To ensure engraving accuracy, fax it to your IDEC representative or Distributor.
Name: Fax:
Signaling Lights
Address: Email:
Area 2†
Timers
2 2 1
Area 2
1/8 5 1/8 6 1/8 7
3 1/8 6 3 1/8 5
4 3/32 5 4 3/32 5
1. Above mentioned specifications hold true for standard size pushbuttons (round and square).
2. †Engraving Area 2 can be engraved for 40mm mushroom Head non-Illuminated push button only.
Contactors
3. Engraving is done on the button itself for non-Illuminated push buttons and on marking plate for illuminated push buttons and pilot lights.
4. Please enter text exactly how you want it engraved, take care to emphasize capital or small letters.
Terminal Blocks
Line 2:
Line 3:
Line 4:
Work Order #:
1904032203
800-262-IDEC (4332) • USA & Canada 727
Switches & Pilot Devices ø22mm - TW Series Switches & Pilot Devices
Accessories
TW Series Accessories
Item Appearance Description/Usage Part Number
Lamp Removal Tool Rubber tool used to install or remove LED’s OR-55
Used to remove contact blocks, transformers, lenses, and adaptors. Can also be used
Contact Block Remover to TW-KC1
determine panel thickness adjustment.
Signaling Lights
Nut Locking Wrench Used in OR-14 locking wrench to tighten locking nuts inside square bezel TW-KQ2
pushbuttons
Clear boot for round extended units OC-32
*In place of asterisk, specify Rubber Boot color:
B (black), G (green), R (red), Y (yellow) - (nitril OCW-11*
rubber)
Mounting Hole Plug Black rubber plug fills unused mounting holes in panel. OB-31
For plugging unused mounting holes in the panel. Tighten the attached locking ring to
Metallic Mounting Hole
a torque of 12 kfg-cm maximum LW9Z-BM
Plug
Degree of protection: IP66
Terminal Blocks
Replacement Black
AKW2B-B
Sleeve for Keyswitch
Circuit Breakers
Metal Button Guard Used on flush buttons to prevent inadvertent actuation OLW-C
Terminal Tab Adaptor Quick- connect terminals #250 (17/64” x 3/64”) single tab TW-FA4
Signaling Lights
Used to provide lock-out protection for pushbuttons and knob selector switches:
• Up to Ø 40mm mushroom head size
Lock-out Adaptor HW9Z-KL1
(Padlock not included.)
Not applicable for e-stops.
Used to mount TW series control unit (except square units) Ø 7/8” (22mm) into a Ø
22mm to 30mm Adaptor TWN-A1R8
1-13/64” (30mm) panel cut-out.
HW-U01 HW-U10
Contact Blocks These contacts are applicable for wires terminated by ring, fork,
HW-U01-MAU HW-U10-MAU
(with side entry) not recommended for bare wire connections.
HW-U01R HW-U10R
HW-U01R-MAU HW-U10R-MAU
(with side entry) (with side entry)
HW-U01-F HW-U10-F
HW-U01-MAU-F HW-U10-MAU-F
Contact Blocks These contacts are applicable for wires terminated by ring, fork, or ferule terminals,
HW-U01R-F HW-U10R-F
(without side entry) and also bare wire connections.
HW-U01R-MAU-F HW-U10R-MAU-F
Timers
(no side entry) (no side entry)
Contactors
Terminal Blocks
Circuit Breakers
1904032203
800-262-IDEC (4332) • USA & Canada 729
Switches & Pilot Devices ø22mm - TW Series Switches & Pilot Devices
Dimensions
Pushbuttons
Flush Extended Extended with Full Shroud
Locking Ring
Locking Ring Safety Lever Lock Panel Thickness 0.8 to 6 Locking Ring Panel Thickness
LO
Safety Lever Lock Panel Thickness 0.8 to 6 LO CK Safety Lever Lock 0.8 to 6 LO
CK CK
26.5
26.5
25
26.5
25
25
29.6
41.4
ø29
41.4
41.4
29.6
ø29
26.5
26.5
25
25
41.4
ø40
ø46
41.4
41.4
ø 29
ø 40
37
49.4 (1 block) 29.4 49.4 (1 block) 29.4
69.4 (2 or 3 blocks) 13 69.4 (2 or 3 blocks) 13
49.4 (1-2 blocks) 29.6
89.4 (4 blocks) 23.2 89.4 (4 blocks) 23.2 69.4 (3-4 blocks) 23
41.4
ø29
37
41.4
41.4
ø40
ø29
37
37
13
49.4 (1-2 blocks) 13 49.4 (1-2 blocks) 24.5 29.6
29.6 49.4 (1-2 blocks) 13 29.6 69.4 (3-4 blocks) 45°
69.4 (3-4 blocks) 22.5 47
69.4 (3-4 blocks) 22.5
Reset (unlock)
26.5
41.4
ø40
25
37
41.4
Timers
ø40
37
29.6
13 41.4
49.4 (1-2 blocks) 24.5 29.6 13
69.4 (3-4 blocks) 47 45° 25 49.4 (1 block) 24.6
29.6 69.4 (2, 3 blocks) 29.4
Reset (unlock) 49.4 (1-2 blocks) 30.5 89.4 (4 blocks) 13
Square Extended
Locking Ring
Safety Lever Lock Panel Thickness 0.8 to 6 LO
CK
26.5
25
29.6
41.4
Contactors
Selector Switches
Adust ring Panel thickness 1 to 6 Adust ring Panel thickness 1 to 6 Adust ring Panel thickness 1 to 6
41.4
41.4
41.4
ø29
ø29
37
37
ø29
37
Terminal Blocks
13
49.4 (1-2 blocks) 13 ø23.4 49.4 (1-2 blocks) 13 49.4 (1-2 blocks)
29.6 19 ø23.6
69.4 (3-4 blocks) 25 29.6 69.4 (3-4 blocks) 25 69.4 (3-4 blocks) 41 29.6
25
Circuit Breakers
25
30
ø29
ø24
37
ø29
ø24
37
37
13 13
20 30 30
19 30 20
Signaling Lights
Marking plate: ø15.5mm Marking plate: 21mm
Marking plate: ø15.5mm
ø29
ø29
37
37
ø40
37
13 13 13
22.5 30 30
22.5 30 22.5
Marking plate: ø13.9mm Marking plate: ø13.9mm
Marking plate: ø13.9mm
37
13
25 30
30.5
Marking plate: ø13.9mm
Timers
1 Contact Block with Full Voltage Adaptor Transformer (2 blocks)
X1
M3.5 Terminal Screws Panel Thickness
X1
1 to 6
X2
X2
86.5
Contactors
2 Contact Blocks with Full Voltage Adaptor Transformer (4 blocks)
M3.5 Panel Thickness X1 Panel Thickness
Terminal Screw M3.5 Terminal Screws 1 to 6
X1
1 to 6mm
X2
X2
106.5
63.5
Terminal Blocks
3 Contact Blocks with Full Voltage Adaptor 4 Contact Blocks with Full Voltage Adaptor
M3.5 Panel Thickness
Terminal Screws
X1
1 to 6 X1
X2
X2
68.5
Circuit Breakers
1904032203
800-262-IDEC (4332) • USA & Canada 731
Switches & Pilot Devices ø22mm - TW Series Switches & Pilot Devices
Dimensions continued
Pilot Lights
Round Flush APW1 Full Voltage Round Flush APW1 Transformer
Terminal cover
APS-PVL (supplied) Panel thickness 1 to 6
Panel thickness 1 to 6
M3.5
37
ø29
Terminal Screws
ø29
T transformer
36
37
20.7
13
59.5 17.2 ø23.6
28.5 13 ø23.6 29.6
34.3 17.2 29.6
Signaling Lights
Round Flush Marking Type APW1B Full Voltage Round Flush Marking Type APW1B Transformer
37
ø29
ø29
20.7
20.7
13 13
69.5 17.2 ø23.6 69.5 17.2 ø23.6
29.6 29.6
Relays & Sockets
Terminal Cover
APS-PVL (supplied) Panel thickness 1 to 6
Panel thickness 1 to 6
M3.5
37
ø29
Terminal Screws
T transformer
ø29
36
37
20.7
13
59.5 24.5 ø23.6
28.5 13 ø23.6 29.6
34.3 24.5 29.6
Square Flush Marking Type APQW1B Full Voltage Square Flush Marking Type APQW1B Transformer
Terminal cover
M3.5 Terminal Screws Panel thickness 1 to 6
Timers
APS-PVL (supplied)
thickness 1 to 6
Panel
□29.6
37
29.6
36
37
ø29
37
R0.8 max.
Pushbuttons • The minimum mounting centers are applicable to switches with one layer of
+0.2
3.2
ø22
0
contact blocks (one to two contact blocks). When two layers of contact blocks
.3 +0
.4
are mounted, determine the minimum mounting centers in consideration of
0
Pilot Light convenience for wiring.
+0.4
024.1
Signaling Lights
Illuminated Pushbuttons
(45 min.)
30 (*1)
• When high temperature is expected, take necessary measures such as securing
50
1.The Ø 0.137” (Ø 3.5mm) recess is necessary when either the nameplate or anti-rotation ring is used.
2. *>1.404” (36mm) for 2- or 3-position.
Accessory Dimensions
OGL-31 OLW-C OCW-11 OB-31
Anti-Rotation Ring Metal Button Guard Pushbutton Rubber Boot Mounting Hole Rubber Plug
9 9 ø29
18.6 M22 P1.0 M22 P1.0
Mounting Centers
50 min.
R42
ø32
ø31
ø26
ø31
ø32
.5
3.5
ø25
3.5
10.2
Button Button
ø22.5 15 1.6t 18.5 21
ø22 ø27.4 0.8 installed installed
Timers
Flush Extended
19.8
0.8 to 3.2
ø29
ø29
R6
AW-QF1B
6.5
93
Contactors
13
24 (inside)
70
30
0 )
ø2
ø5 44.4
2.2
Waterproof Rubber
:ø
(ID Key hole ø8 29.5 Gasket 0.5t
30
Terminal Blocks
7.2
22.8
.0
Ø7
15.5
39.1
Circuit Breakers
1904032203
800-262-IDEC (4332) • USA & Canada 733
Switches & Pilot Devices ø22mm - TW Series Switches & Pilot Devices
Option:
Nameplate 0.1 mm
1
2 1 mm Panel Thickness Scale
3 (in 1 mm on the operator)
Operator 5
4
6
(Panel)
A
3
2
3
Note: When a nameplate
Waterproof 5
4
5
4
or an anti-rotation ring
Waterproof Lens 6 6
Adjustment Ring square pushbuttons Ex. Panel thickness 2 mm Ex. Panel thickness 2.6 mm
thickness dimension.
Panel Thickness and pilot lights only),
An adjustment for panel thicknesses shown below can be made quickly by using
Base the contact block remover tool.
1.6mm Contact Block Panel Thickness
Removal Tool Adjustment Ring
2.3mm (TW-KC1)
3.5mm
LED
Lamp Holder
1mm
Timers
2mm
Contact 3.2mm
Block
Lead Contact Block Removal Tool
Holder
Contactors
Options
Signaling Lights
Round
Marking Lens
Unit
Square Lens
Timers
Square Lens
Press in
Marking Plate
Insert
Contactors
To remove square lens from operator, place a screwdriver under the indentation on the side of the lens. To remove the marking plate, place a screwdriver under the
indentation and lift out the plate. The lens retainer can be removed by pressing a 3/16” screwdriver into one of the recesses.
Terminal Blocks
Marking Plate Engraving Area
Shape Engraving Area Used With Part Number
Ø 0.55” (14mm) Illuminated pushbuttons ALW2B
Round
Ø 0.55” (14mm) Pilot lights APW2B
Mushroom Ø 0.55” (14mm) Illuminated mushroom ALW3B
Circuit Breakers
1904032203
800-262-IDEC (4332) • USA & Canada 735
Switches & Pilot Devices ø22mm - TW Series Switches & Pilot Devices
Instructions, continued
Selector Switches
The operator shaft of each unit has a recess to identify in which direction to install the handle. Align the handle with the recess. Press color insert (TW-HC1) into the
handle and then press handle into the operator, as shown below.
Recess
Press in
color insert
Press in
handle
Signaling Lights
0 2 3
2 4
1 2 1 3
1 2 1 5
4
Diode
Terminal Blocks
Circuit Breakers