Professional Documents
Culture Documents
Curtiss Wright February2017 Bulletin
Curtiss Wright February2017 Bulletin
February 2017
General information
The Acra KAM-500 Databook (HW/BK/0002) comprises data sheets for released Acra KAM-500 products. The latest release of
the Acra KAM-500 Databook is dated 1 Feb. 2017.
The KSM-500 Databook (HW/BK/R/0001) comprises data sheets for KSM-500 tools. The latest release of the Acra KSM-500
Databook is dated 6 Feb. 2017.
The Applications Handbook (HW/BK/0005) comprises technical notes for Curtiss-Wright products.The latest release of the
Applications Handbook is dated 1 Feb. 2017.
DAS Studio 3 is the setup software for data acquisition units, network switches, recorders and ground stations. The latest
release of DAS Studio 3 is version 3.4.1.
XidML SDK 1.0 for XidML 3.0 is now available. It contains the source code that demonstrates the basic usage of the XidML API.
The latest KSM-500 software (including kSetup 1.18.1) is now available. For details, see “Software status” on page 2.
If your license is covered by our maintenance contract, you are entitled to upgrade your current version of GS Works with this
new release, free of charge. For a copy of the latest release, contact acra-support@curtisswright.com. If in doubt whether or not
your license is covered, contact dub_license-request@curtisswright.com with the confirmation of order reference (COO/X/XXX)
and the SysID of the license to be checked.
To get a copy of any released software or documentation mentioned here, contact acra-support@curtisswright.com.
NOTE: A leap second was inserted on December 31, 2016, at 23:59:60 UTC.
New tutorials
N/A
Training
Curtiss-Wright offers a variety of training courses, within SVS/TRN/100, which help delegates develop the skills needed to
configure the various Curtiss-Wright products. Standard courses include introductory training for Acra KAM-500 airborne data
acquisition hardware, advanced training on Acra KAM-500 airborne data acquisition systems and training for GS Works 8
real-time and post-processing data analysis. Course content can be standard, user-definable or a combination of both. We
strongly recommend training for those who are not familiar with Curtiss-Wright equipment.
Document changes
The content of the following documents has been revised since the previous release of the bulletin.
Technical notes
TEC/NOT/046 - Using the Added instructions to cover using the KAD/EBM/101 with DAS Studio 3.
KAD/EBM/101
10 Jan. 2017 | TEC/NOT/046
TEC/NOT/056 - Using the Added instructions to cover using the KAD/CBM/102 with DAS Studio 3.
KAD/CBM/102
12 Jan. 2017 | TEC/NOT/056
Overview of SNMP and using Throughout the document, applied style changes. In “MIBs” section, added an example for accessing
third party SNMP tools the hierarchy. In “Example of reading the MIB file” section, made modifications. Added a new “Settings
9 Jan. 2017 | TEC/NOT/058 subtree section” section. Added a new “Time subtree section” section. Added a new “Device
Identifiers section” section. In “SNMP software” section, added addtional items. In “Installation and
setup of Net-SNMP” section, made modifications. In “Using Net-SNMP” section, added additional
examples. Added a new “Troubleshooting” section.
TEC/NOT/064 - Using the Added instructions to cover using the KAM/MEM/103 with DAS Studio 3.
KAM/MEM/103
7 Jan. 2017 | TEC/NOT/064
For a list of all released hardware data sheets, see “Reference numbers and issue dates for hardware data sheets” on page 5.
Software status
DAS Studio 3
The current release is 3.4.1. Features of the software include the following:
• Discovers, configures, manages and programs Data Acquisition Units (DAUs), recorders, switches, ground station boards,
and third party equipment
• Functionality can be extended through external plug-in applications
• Supports the open metadata standard
KSM-500
The current release of KSM-500 is KSM-500 suite 2.17 which includes kSetup 1.18.1 and kProgram 1.18.1. For a list of
supported modules, refer to the kSetup 1.18.1 and kProgram 1.18.1 data sheets. For this software release, the software
operates with XidML 2.4.1.
NOTE: When using kQuicklook with a SAM/DEC/008, a patch has to be applied. Copy from the installation folder Updates\Iad-
sTpp_8.1.2_SAMDEC008_patch, iadstpp.exe to c:\program files\iads\iadstpp directory
GSX-500
GS Works 8
The current release of GS Works 8 is 8.1.1. Features of GS Works 8.1.1 include the following:
• Interactive interface which allows custom data displays, parameter definitions, analysis options and test setup
• Runs on Microsoft Windows® PC platform and Commercial Off-The-Shelf networks
• Exports to CSV, Microsoft Excel and MathWorks MATLAB®
• Walk-away media - full data set
• XidML® compatible (versions 2.41 and 3.0)
• Supports Packet CAPture (PCAP) format
• Supports avionic bus standard IRIG-106 PCM
• Supports packetizers for ARINC-429, CAN, MIL-STD-1553, and TTP XidML 3.0 only
• Supports MPEG-4 and H.264 video coding formats and audio decommutation
• Client/Server Mode
• Supports CVSD audio
KAM/MEM/113 CompactFlash memory module with • Supports removable solid-state memory cards
7 Feb. 2017 | DST/X/067 PCAP format • Removable CompactFlash® media (supports Type I
& II)
• Uses FAT32 file system
• Stores Ethernet frames in industry standard Packet
CAPture (PCAP) files, viewable using Wireshark® or
another third party application
• Always Log or log when triggered
• Logs data at up to 2 Msps
• Records IENA and/or iNET-X packets
KAD/VID/106/B H.264 video encoder (analog video • H.264 compression of video input channels (NTSC
31 Jan. 2017 | DST/AB/032 input) - 1ch or PAL)
• Supports digital video formats CIF, 2CIF, D1
• Configurable I-frame to P-frame ratio
• Programmable frame rates
• Advanced Audio Codec (AAC) audio encoding
• Constant compressed video bit-rate target can be
set to between 250 kbps and 10 Mbps
Legacy products
Since the previous bulletin, data sheets for the following documents have been moved to legacy.
Obsolete documents
Since the previous bulletin, the following documents have been made obsolete.
Technical notes
For a list of products compatible with software, see “Products supported by KSM-500” on page 37.
Product Issue date | reference number Product Issue date | reference number
Recorder products
AFDX-1 ARINC-NDO Parameter naming clash reported after a successful ARINC-NDO import of AFDX parameters
Importer
ALG-11 Studio Algorithms Only a single window for the values to cause an event is available for the BIT101 or BIT102 in Das
Tab General Studio meaning you can check an internal range, but cannot check an external range
ALG-6 Studio Algorithms The Error message (x) stays on algorithm tab even after removing the 'trigger condition'
Tab General
APP-52 Studio Applications Unable to program GTSDEC card in DAS Studio if parameters placed in PCM package
General
APP-56 Studio Applications Unable to load DLL 'gtsdecw.dll': The specified module could not be found. (Exception from
General HRESULT: 0x8007007E)
ARINC-9 ARINC-429 Builder When changes are made to the SDI or SSM values, Save and Close button only becomes active
after the table has lost focus
CFT-54 Calibration Fetch Calibration fetcher may show issues when DAS Studio is installed to folders other than the default
location
CFT-68 Calibration Fetch Calibration Fetcher seems to be confused for modules on a slave
DAS-1019 DAS Studio General Calibration Fetcher does not discover slave DAU
DAS-1033 DAS Studio General DAS Studio gets stuck in update loop when attempting to add parameters to packet.
DAS-1045 DAS Studio General SNMP from Windows services must be disable
DAS-1076 DAS Studio General SWI108 parameters cannot be transmitted using the Package Generator
DAS-1107 DAS Studio General DAS Studio may become unstable if "&" is used in a packet name.
DAS-1128 DAS Studio General Duplicated name causes a problem when loading a file
DAS-1133 DAS Studio General Delay added to the PCM frame in Ethernet to PCM systems may be large under certain
configurations
DAS-1160 DAS Studio General GUI may jump focus when switching between tabs
DAS-1163 DAS Studio General When manually defining parameters for parser packages the full list of parameters available is
shown
DAS-1164 DAS Studio General Cannot uses "/" in #define statements for MAT101 Header files
DAS-1167 DAS Studio General MEM103 Package builder shows blank values for parameter already placed in the MEM103 due to
different default base sampling rate
DAS-1180 DAS Studio General ARINC-429 builder hangs when closing it from the X in the top right of its window
DAS-1189 DAS Studio General DAS Studio Packages Tab PCM builder crashes when changing parameters manually
DAS-1191 DAS Studio General DAS Studio does not warn user if a process is not linked to a package
DAS-1199 DAS Studio General GUI for the ADC013 Modules Settings allows user to set Range Max to be less than Range Min.
the user will not be warned in the GUI, but will receive an error message at compile time
DAS-1226 DAS Studio General IENA header with iNET-X body support
DAS-1241 DAS Studio General Synchronous connection is assumed for PCM links
DAS-1251 DAS Studio General Packet-Filter on EBM102 should not use the same IP as other packets in the task. May result in
compilation errors
DAS-1262 DAS Studio General Package Generator does not warn it will delete/modify existing packets
DAS-1283 DAS Studio General DAS Studio show an error 'The directory is not empty' when the cache directory is open by
windows explorer
DAS-1309 DAS Studio General A configuration can be verified but issues no packets from DAU 3
DAS-1315 DAS Studio General TCG103 from DAS Studio 3.2 fails to open in DAS Studio 3.4.0 due to changes in the xDefML file
DAS-1353 DAS Studio General If Scheduling cannot be achieved you may see 'Unexpected late transfer' error
DAS-1360 DAS Studio General When X_SYNC is enabled on the TCG modules the compiler does not check to see if the
acquisition cycle in valid
DAS-1370 DAS Studio General FBM102 is not a standard FireWire module. Packages and parameters must be added from the
Packages tab and not the FireWire builder. A specific FBM102 firewire package can be added
from the palette. When using the wizard, users should ignore the FBM102.
DAS-1418 DAS Studio General To manually place a parameter using 1:1 commutation in the Transmission Assistant you must
Drag and drop to the first minor frame
DAS-1419 DAS Studio General Burst Placement of video parameters may take some time to complete in large PCM frames
DAS-1436 DAS Studio General DAS Studio may be slow to respond after compilation / Programming, user will not be asked to
'Please wait'
DAS-1439 DAS Studio General Burst Placement may fail if Smart placement is enabled
DAS-1442 DAS Studio General Filtering on PCM Parameter grid may still be applied from previous task settings
DAS-1450 DAS Studio General Smart mode will not use the last word on the PCM
DAS-1459 DAS Studio General In the PCM Package grid the full Parameter name may not be displayed
DAS-1460 DAS Studio General Error Message 'Tried to access to an unavailable frame location', when placing 8 parameters at
1:2 using smart mode in frame with enough space to place all commutations
DAS-1462 DAS Studio General In the Transmission Assistant, when Smart Placement mode is enabled the Parameter place
parameters vertically or horizontally setting is ignored
DAS-1464 DAS Studio General Crash when clicking on PCM frame too often
DAS-1467 DAS Studio General MAT101 Processes do not get saved in XidML
DAS-1476 DAS Studio General Package Generator should not be an option if PCM is used
DAS-1479 DAS Studio General Palette with add with connections in PCM will only import the frame shape
DAS-1485 DAS Studio General Syncword will display an error caused by a refresh issue, 'Syncword must be a multiple of the
default word', when updating the syncword
DAS-1486 DAS Studio General The words per minor frame change automatically without warning
DAS-1498 DAS Studio General Adding a hex alpha character to an integer field in a generic package setting causes DAS Studio to
crash
DAS-1518 DAS Studio General Comments cannot be stored into short and long description
DAS-1536 DAS Studio General Standalone compiler crash (access denied) on launch when DAS Studio is running on Windows 7
32-bit OS
DAS-1564 DAS Studio General VID106 or 103 in 2 different packages must have the same sampling rate
DAS-1575 DAS Studio General Video cannot be transmitted over ETH and over PCM simultaneously
DAS-1583 DAS Studio General Video burst in MCS for PCM fails compiling
DAS-1585 DAS Studio General Failure in PCM_WD_SETUP after adding burst video
DAS-1587 DAS Studio General Crash when del parameter MyARINC-429-WordPackage from global parameter list
DAS-1597 DAS Studio General Adding IP addresses in the discovery window doesn't always work
DAS-1604 DAS Studio General Controller file incorrect for the MEM103
DAS-1609 DAS Studio General Parameter name should not contain dots otherwise they cannot be opened by Matlab
DAS-1610 DAS Studio General Scheduling Error : Memory package should have less than 16k parameters but
KADMEM004B32GMSP has 65792 parameters
DAS-1614 DAS Studio General When parameters are placed into the PCM, users should not be allowed to change sampling rate
DAS-1615 DAS Studio General Changing rate on multiple parameters is only possible if the mouse is still on the selected area
DAS-1621 DAS Studio General No decimation on analog modules should create an error
DAS-1635 DAS Studio General DEC103 is limited to 8Mbits in synchronous mode but DAS Studio compiles successfully
DAS-1638 DAS Studio General Quite slow to add few parameters into a PCM with some parameters already placed
DAS-1639 DAS Studio General MCS does not need to transmit the transport package at the same rate as a secondary PCM
transmitter package in a slave chassis.
DAS-1647 DAS Studio General Scheduling Error : Failed to generate timing window for
ANE2[15:0](0)<<(Parser9:36)[15:0]-s(7+7)/56
DAS-1649 DAS Studio General DAS Studio resolution issue for toughbooks
DAS-1651 DAS Studio General Source IP in IENA should not be there or shall take the default module IP address
DAS-1655 DAS Studio General Vertical placement should not be an available option in ethernet packages tab
DAS-1657 DAS Studio General ENC005B doesn't show the commutation depending on the frame rate used in asyncrhonous
mode
DAS-1665 DAS Studio General Import ARINC429 doesn't show the bus which we want to import
DAS-1666 DAS Studio General DAS Studio - The value 'OffsetBinary' is not valid - BitVector is the only allowed value
DAS-1693 DAS Studio General Creating IENA packets removes previous existing iNet-X packets from DAS Studio
DAS-1702 DAS Studio General ADC136: changing the signal conditioning type doesn't modify the lookup table
DAS-1708 DAS Studio General Packet KAMMEM1131ut100 does not have a unique stream id
DAS-171 DAS Studio General Google Desktop and DAS Studio running simultaneously may cause a detrimental effect
DAS-1731 DAS Studio General DSI102 should not compile on the attached setting
DAS-1735 DAS Studio General Replacing parameter in a discrete will prevent the xidML from being loaded again in DAS Studio
DAS-1738 DAS Studio General Ethernet to PCM bridge does not work untill you save and reopen the file
DAS-1739 DAS Studio General PCM discrete parameters, when one of the source parameters is from a Bus Monitor, will not
verify, unless the source parameter is also placed in PCM
DAS-1748 DAS Studio General Recorder Status Tool in DAS Studio does not report errors connecting to recorders
DAS-1771 DAS Studio General NET/REC/006 and SSR/CHS SNMP varibles are programmed correctly but the hardware fails to
transmit the correct value back to software.
DAS-1772 DAS Studio General Default Stream ID of FFFFFFFF is the same value as SSR/CHS/001/B default filter, hence
packets with that stream ID will not be transmitted, unless filter is changed.
DAS-1774 DAS Studio General Documentation link does not work for certain modules
DAS-1792 DAS Studio General DAS Studio hangs when discovering Ground Station cards if the driver is not installed
DAS-1793 DAS Studio General If GTS-500 board is fitted into PCI-slot 8 in a PC, once discovered you can't view the file in the
Navigator.
DAS-1794 DAS Studio General Discovery tool should state "no hardware found" on Studio
DAS-1796 DAS Studio General Discovery can return PCI-Slot(11) or other 'invalid' pci-slot.
DAS-1811 DAS Studio General GTS/BSC/003/C :gStatus should Display "PCM-In(0)" status
DAS-1812 DAS Studio General BSC/003/C: gStatus should not display "DecomeLock(0)"
DAS-1813 DAS Studio General Studio allows user to run on gStatus while another gStatus is running but doesn't display any LED
definition for the second gStatus.
DAS-1814 DAS Studio General SSS Status shall reload automatically the previous xidML
DAS-1830 DAS Studio General DAS Studio crashes while importing a switch to a xidML
DAS-1840 DAS Studio General Automatic renaming removes '0' from the parameter name
DAS-1841 DAS Studio General Transmission assistant corrupts the PCM frame
DAS-1848 DAS Studio General File containing EBM101 which previously compiled will now not compile if the mask for each
classifier does not contain the same number of bits
DAS-1850 DAS Studio General Using comas instead of points in regional settings will cause a compilation error
DAS-1852 DAS Studio General KAMCSB12U Discovers incorrectly in DAS Studio 3.4.1
DAS-1855 DAS Studio General After a calibration error occurs during programming from DAS Studio, the message box appears
after the end of the operation to inform the user that the system programmed successfully when it
did not
DAS-318 DAS Studio General Changing Windows theme while DAS Studio is running may cause DAS studio to become
unstable
DAS-396 DAS Studio General Old Tasks may appear invalid due to changes in xDefML files
DAS-433 DAS Studio General It is necessary to run DAS Studio as administrator on Windows 7 OS
DAS-472 DAS Studio General DAS Studio GUI appears to be doing nothing during Program or Verify while Multi-Chassis
Scheduler is running
DAS-591 DAS Studio General Multi Chassis Scheduler does not automatically transfer parameters from a slave chassis to a
BIT102 module for event monitoring
DAS-616 DAS Studio General Palette caches imported files but does not reuse them resulting in poor memory performance
DAS-716 DAS Studio General GUI allows users to add parameters to Parser aligned iNET-X Packages, resulting in invalid XidML
files
DAS-734 DAS Studio General If the installation path name changes with new versions of DAS Studio, references to lookup files
may become invalid in old tasks and require updating
DAS-740 DAS Studio General Message server displays Compilation Complete after programming hardware
DAS-747 DAS Studio General DAS Studio does not automatically calculate and update the PCM Major Frame Rate
DAS-776 DAS Studio General Frequency Mode update rate for the DSI102 family modules is not supported
DAS-815 DAS Studio General Packages Tab allows user to place parameters into Parser Aligned and Bit Stream iNET-X
packages. This should not be done as it will corrupt the file
DAS-906 DAS Studio General Under rare circumstances the vertical scroll bar may disappear on the global parameter list and
does not return until you restart DAS Studio
FAL-100 Falcon (EEPROM There are small differences in EEPROM images generated for KADADC008 module dependent
Generator) upon whether Win XP or Win 7 64-bit is the underlying OS
FAL-159 Falcon (EEPROM There is no tool in DAS Studio for setting the IP address on a BCU105 family module
Generator)
FAL-5 Falcon (EEPROM Installing DAS Studio to locations other than the default install path may result in compilation
Generator) issues
FAL-70 Falcon (EEPROM Compiler sometimes has problems removing old cache directory on Windows 7 32-bit OS
Generator)
FOP-41 Studio File Invalid XidML data is not flagged in DAS Studio.
Operations
FOP-62 Studio File Error message for dynamic constraint generation does not specify the setting / channel /
Operations instrument the error is on
GSI-6 Studio Global Status Status bar colour does not reflect programming errors
Indicator
HDF-121 hDefML File The hDefML for all variants of TCG102, TCG105, and SSRCHS in DAS Studio have heading Hi
and Lo register swapped
HDF-80 hDefML File MEM004B needs to put literal values to formats other than 0
MCS-1 Multi Chassis Users will see an error when compiling or programming a task if they have manually built a slave
Scheduler PCM frame.
MCS-13 Multi Chassis Having two PCM packages with same rate and size on one PCM link results in unclear error
Scheduler message
MCS-136 Multi Chassis Having multiple PCM package in a task while Packetization enabled on single ENC106 channel
Scheduler cause an error
MCS-201 Multi Chassis Packetizer for ABM103 Schedules same number of packets per second regardless of the Bus
Scheduler speed setting
MCS-209 Multi Chassis Error '...not present in dictionary' after replace of slave PCM on detection of previous package
Scheduler
MIL-5 MIL-STD-1553 More data word parameters can be added than defined in the message Parsing Rules
Builder
MSI-109 Studio Installer DAS Studio installer may cause anti virus software to issue a warning
MSI-149 Studio Installer DAS Studio installer may remove components that affect KSM-500 and kFlashCard when
uninstalling
MSI-167 Studio Installer 'UnauthorizedAccessException' error on Windows XP when tried to run DAS Studio as limited
user, although it was installed as admin user
MSI-190 Studio Installer User may see an Error message when installing if user doesn't have Admin rights
MSI-254 Studio Installer Uninstalling DAS Studio deletes the calibration information gathered by Calibration Fetcher
MSI-66 Studio Installer Installing DAS Studio 3.1 after installing KSM500 1.14 causes startup problems for kSetup 1.14
because some of the KSM500 1.14 folder locations have been altered
MSI-283 Studio Installer .NET 4.0 Framework will not install if the Windows Imaging Component is not already installed
NAV-126 Studio Navigator GTSDEC005C allows more than one package to be added to the link in DAS studio
PB-48 Studio Package Package builder displays 'Package generation complete' even if no packages are created
Builder
PB-57 Studio Package Using an illegal bit rate in the PCM package generator may cause it to hang, the Transmission
Builder Assistant should be used instead
PB-71 Studio Package Encountering Errors in PCM package generator may result in an empty PCM frame. Transmission
Builder Assistant should be used instead
PB-72 Studio Package Package Builder should not alter an existing PCM frame that already works
Builder
PB-74 Studio Package Package builder does not remember if you locked a parameter to a PCM location
Builder
PB-79 Studio Package Package Generator does not place parameters from KADSWI108
Builder
PKG-364 Studio Packages Mouse 'Wait' icon is not always displayed when waiting for DAS Studio to complete a task
Tab General
PKG-436 Studio Packages The IRIG-106 packages tab does not let you define everything that you might want for an IRIG-106
Tab General package definition such as FCC, URC..
PKG-439 Studio Packages DAS Studio does not prevent user from creating a slave PCM packages, these are automatically
Tab General created at compile time
PKG-450 Studio Packages Clicking on the XidML file root and then clicking between tabs may be slow
Tab General
PKG-472 Studio Packages DAS Studio does not automatically update certain fields when manually creating Ethernet packets
Tab General e.g. Stream ID may be repeated
PKG-497 Studio Packages Packages tab does not always show Package Grid when opened the first time
Tab General
PKG-501 Studio Packages For MIL-STD-1553 Mode code 17 messages, the sub-sub address map is not supported on
Tab General MIL-STD-1553 messages
PKG-503 Studio Packages User cannot set occurrences for ARINC ARI002 package via grid, but can set the occurrences
Tab General under preferences
PKG-520 Studio Packages Packages tab is not refreshed when deleting a module
Tab General
PKG-54 Studio Packages Navigating between modules when Packages tab is in context can result in slow performance of
Tab General DAS Studio
PKG-580 Studio Packages Users may experience poor Memory performance when switching between tabs multiple times
Tab General
PKG-594 Studio Packages UDP Destination Port defaults to 0 for iNET-X Placed packets
Tab General
PKG-598 Studio Packages Refresh issue when Delete process package filter for EBM, have to save and re-open the task file
Tab General
PKG-603 Studio Packages Package Rate for Packetizer Packets can be set but has no impact as it is overwritten on Verify
Tab General
PKG-692 Studio Packages Transmission assistance does not update when fragmentation error is caused by the placed
Tab General content grid
PKG-702 Studio Packages Changing burst parameter properties in the Placed Data grid replaces the burst parameter with a
Tab General single instance
PKG-703 Studio Packages Burst parameter occurrences not displayed correctly in the Placed Data grid
Tab General
RIB-3 Studio Ribbon Bar If you are editing a table cell and then select a menu option, i.e. Save, the changes in the cell will
be lost.
SCS-126 Single Chassis The folder used for storing compiler debug files is not cleared out at start of compilation
Scheduler
SCS-379 Single Chassis 32 bit registers are presented correctly in BCU140B packets but are reversed in MBI103B
Scheduler messages
SCS-388 Single Chassis Overrun detected error with more than 3.3M Ethernet transfers
Scheduler
SCS-477 Single Chassis On the BIT101 Users can create a Trigger Condition and not assign a parameter to it. They will not
Scheduler be warned until compile time
SCS-487 Single Chassis Compiler error with synchronous DEC103 - Failed to generate timing window for DECData
Scheduler
SET-116 Studio Settings Tab Triggering of recording on the MEM103B is not supported. The only options are Log Always or
General Never Log.
SET-121 Studio Settings Tab Bitrate does not automatically update when choosing PCM frame shape unless using PCM
General Package Builder then rate is automatically updated.
SET-153 Studio Settings Tab KADADC135 and KADADC136 Changing Excitation Mode from Voltage to Current, or vice versa,
General does not automatically update the amplitude to a valid figure for that setting
SET-47 Studio Settings Tab DAS Studio GUI does not detect and warn users if two Packetizer channels use the same Stream
General ID. Error is shown at compile time
SET-51 Studio Settings Tab Updating TDC002D parameter 'Range Min/Max' is not done automatically by UI dependent on the
General look up file selected
SET-53 Studio Settings Tab Updating ADC113B 'Range Min/Max' and 'Excitation amplitude' is not done automatically by UI
General dependent on the algorithm reference selected
SKD-14 Studio Hardware Discovery tools ask for irrelevant Gateway Input range when discovery Ground Station Modules
Discovery
SKD-16 Studio Hardware 'IP Address' range validation is not applied on discovery gateway definition
Discovery
SKD-20 Studio Hardware Discovery tool does not state 'no hardware found' when Discovery fails, just reports Discovery
Discovery complete
SKD-36 Studio Hardware DAS Studio Hardware Discovery tool does not automatically open new XidML file when discovery
Discovery is complete
SPC-77 Studio Power Power Calculator artificially splits 7V and 12V into equal positive and negative voltage rails which
Calculator does not correspond to hardware capabilities
SPG-10 Studio Package Grid iNET-X placed package grid displays word location incorrectly
SPG-23 Studio Package Grid PCM package display gird may require a refresh after Verification or Programming
SPG-25 Studio Package Grid DAS Studio allows Users to add Parameters to Bus Monitor Packages that are already full, but
does not report any warning
SPG-26 Studio Package Grid DAS Studio Packages display may require a refresh after adding parameters
SPLT-3 Studio Package PackageRate on PCM links is not automatically updated when the bit rate is changed
Links Table
SPPT-10 Studio Package DAS Studio fails to auto-validate 'data type' for iNet-X packages
Properties Table
SPPT-33 Studio Package Illegal Stream ID settings may only be caught at compile time
Properties Table
SPRP-34 Studio Parameters Default Parameters list may be shown when adding parameter to a package, instead of the
Palette parameters associated with the task. Click on 'This file' to get the correct parameter list
SPT-14 Studio Packages Overlap error when adding parameters from table
Table
SPT-5 Studio Packages Need a limitation on the maximum number of parameters/words that can be placed into different
Table types of package
SPT-81 Studio Packages Invalid placement location indication for all parameters when packet size is more than maximum
Table iNET-X size
SPT-9 Studio Packages In some scenarios, validation of parameter name uniqueness may not work as expected
Table
STV-10 Studio Verify Using Auxiliary files is not supported in DAS Studio
STV-4 Studio Verify When compilation is cancelled it will finish the current chassis before cancellation is completed
STV-6 Studio Verify DAS Studio does not automatically save changes to the XidML file. User must click save to ensure
no changes are lost
TLS-31 Studio Tools DAS Studio does not manage Sensors and input channels calibration
General
TTPI-5 TTP Importer Cancelling TTP importer while removing links may cause DAS Studio to become unstable
XACS-13 XidML API Mode code 17 sub sub address map not supported on MIL-STD-1553 messages
XACS-18 XidML API Adding 1553 message with " ' " in the message name creates invalid XidML
XDF-135 xDefML File RS422_OUT can act as either X-sync out or IRIG-Out on all TCG Modules. However, the Outputs
only ever show RS422_Out, this stops users connecting IRIG_Out to IRIG_in on other modules in
the GUI
XDF-144 xDefML File KADADC129S1 ExcitationAmplitude default value is 0.2 on the datasheet and 5 in DAS Studio
XDF-146 xDefML File KADADC109CS1 ExcitationAmplitude default value is 0.2 on the datasheet and 5 in DAS Studio
XDF-147 xDefML File 'BalanceTolerance' and 'Balance Target' ranges are not defined in datasheets of Analog Modules
XDF-200 xDefML File Cannot connect IRIG-B_out from TCG102C to NETSWI004 digital IRIG-B_In
XDF-327 xDefML File DAS Studio UI will allow BitRates lower than what is achievable in the hardware on BCU101
modules
XDF-328 xDefML File SSRCHS001B DAS Studio Setting Memory Utilization Threshold default value should be 0
XDF-339 xDefML File Not all KAMTCG102 possible settings are supported in the DAS Studio UI
XDF-343 xDefML File Not all Ethernet devices use the same default IP addresses
XDF-394 xDefML File DAS Studio allows the user to define the Max/Min temperatures per channel, needs to be the
same for all channels
CFT-53 Calibration Fetch Closing Calibration Fetcher window before it is finished may cause Das Studio to become unstable
CFT-64 Calibration Fetch Calibration Fetcher returns an error when fetching for TDC102B
CFT-69 Calibration Fetch Calibration Fetch for KADMDC103 does not work with TFTP Controllers
DAS-1018 DAS Studio General Compiling of tasks using the KADUBM103 may take a long time for certain configurations
DAS-1032 DAS Studio General DAS Studio crashed when user attempted to add a link to a switch port.
DAS-1034 DAS Studio General Deleted packets are retained in XidML file but are not displayed in GUI
DAS-1035 DAS Studio General MAT101 Processes do not get saved in XIDML
DAS-1038 DAS Studio General 10 bits PCM fixed word width in DAS Studio support required
DAS-1059 DAS Studio General Programming problem with NETSWI003 when using Asian OS
DAS-1063 DAS Studio General Compile Failure where discrete Low parameter on the DSI in the TTX chassis is sourced from the
BCU145 instead of the DSI.
DAS-1064 DAS Studio General DAS Studio crashes if verify clicked but no task loaded
DAS-1136 DAS Studio General DAS Studio not saving Hi Lo discrete parameter setting to XidML
DAS-1151 DAS Studio General Crash when removing a link on the ENC106
DAS-1161 DAS Studio General Change of Node Address causes crash + programming failure
DAS-1182 DAS Studio General Filter cutoffs on KADADC136 are not set properly
DAS-1192 DAS Studio General Crash when you select multiple processes to be deleted
DAS-1195 DAS Studio General FIR digital filter mode on ADC136 is not programmed properly
DAS-1201 DAS Studio General DAS Studio Crash when adding Packages
DAS-1217 DAS Studio General Package Generator cannot create common PCM frame shape
DAS-1252 DAS Studio General DAS Studio 3.3.6 contains kQuicklook 7.3.3 instead of 8.1.1
DAS-1253 DAS Studio General UDP Port Number was set to max of 16 bit number, resulting in port not being saved or flagged as
error.
DAS-1255 DAS Studio General Added parameter disappears after re-opening the file
DAS-1258 DAS Studio General ETH102 fails to program sector 7F using TFTP
DAS-1268 DAS Studio General SBM101 in Mode 0 does not behave in the same way as a SBM001
DAS-1290 DAS Studio General MAT101 sink ADC parameters more than their allowed maximum sampling rate
DAS-1307 DAS Studio General NETREC002 is recognized but not supported by DAS Studio 3.3.6
DAS-1308 DAS Studio General Some PCM configurations that are successfully verified do not work
DAS-1327 DAS Studio General Failed to generate for module KADEBM102 - Failure in ebm101_parserslots - Index was outside
the bounds of the array.
DAS-1343 DAS Studio General Modify importer to automatically add parameters to empty ARINC-429 & MIL-STD-1553 messages
DAS-1354 DAS Studio General Corrupted user.config file caused DAS Studio 3.3.5 and 3.4.0 to crash
DAS-1358 DAS Studio General The setting Color Balance Red could not found on the OBECAM001
DAS-1359 DAS Studio General Certain Parameters in Transport packet are sourced from NETREC006
DAS-1385 DAS Studio General TCG102 time is updated once per acquisition cycle
DAS-1399 DAS Studio General Options required for changing the word index for SFID
DAS-1400 DAS Studio General Minor frame numbers are not displayed for PCM frames under Content of Packages Tab
DAS-1401 DAS Studio General Print option added to print details of Major and minor frames of placed parameters
DAS-1402 DAS Studio General Video Burst Placement only uses the lowest commutation and doesn't compile
DAS-1416 DAS Studio General Adding burst video corrupts the XidML file
DAS-1417 DAS Studio General With burst of 64 and repeat burst of 64, only one sample is placed per minor frame if another
parameter is placed on a location of the burst.
DAS-1433 DAS Studio General Calibration Fetcher doesn't find chassis in the task file
DAS-1435 DAS Studio General Failed to generate a valid transport package shape for link PCM-In(0)-PCM-OUT(0).
DAS-1437 DAS Studio General Video parameter doesn't display the right information after a burst
DAS-1438 DAS Studio General Video burst should warn user if the placement is not possible
DAS-1443 DAS Studio General Transmission assistant: specified argument was out of range of valid values
DAS-1444 DAS Studio General Scheduling Error : Failed to generate timing window for myadc112_Ch0[15:0]
DAS-1445 DAS Studio General Transmission assistant removed all the parameters in the frame if an overlap happens
DAS-1454 DAS Studio General Controller cycle can pick common frequency when rates do not match without warning or error.
DAS-1456 DAS Studio General Decimation with multiple PCM is not working
DAS-1461 DAS Studio General Your selection could not be placed as it would cause an overlap
DAS-1463 DAS Studio General You cannot transmit at higher rate a same parameter from the ENC than on the BCU
DAS-1477 DAS Studio General You can import one message from a bus but you cannot import multiple messages at the same
time.
DAS-1484 DAS Studio General Tick Low output an error on the BIT101 status
DAS-1496 DAS Studio General Importer automatically adds parameters to empty ARINC-429 message, its a 32 bit parameter after
import, 16 bit after re-open xidml
DAS-1535 DAS Studio General ENC106 PMF minimum bitrate is always considered enable
DAS-1565 DAS Studio General IENA offset word shows invalid placement location
DAS-1579 DAS Studio General Input string was not in a correct format
DAS-524 DAS Studio General Deleting a parsed bus message or module from a task file does not remove parameters from that
message or module from a transmitter, i.e. Ethernet Packet or PCM Stream, they must be
removed manually
DAS-536 DAS Studio General Programming error when a chassis is not physically present
DAS-583 DAS Studio General Memory usage may be high when compiling large systems
DAS-603 DAS Studio General Placed iNET-X Packets are not padded to fall on a 32-bit boundary by DAS Studio
DAS-674 DAS Studio General Adding packages in process tab causes crash by pressing the KB right mouse button
DAS-683 DAS Studio General Verify fails when links are connected to a KADSWI101, removing the links allows Verify to pass
DAS-685 DAS Studio General Adding a second EBM to parse 3rd party IENA create compilation errors
DAS-704 DAS Studio General Parameters requested from MBI103 on MIL-STD-1553 bus from an external BC are incorrect.
DAS-719 DAS Studio General TCG103 does not synchronize to GPS or IRIG when programmed with DAS Studio
DAS-754 DAS Studio General ETH101 in DAS Studio can create bad UDP length packet
DAS-761 DAS Studio General Putting a 7.8125Hz frame in an ENC in a chassis controlled by a BCU140 compiles, it should not
compile.
DAS-780 DAS Studio General Speed and Performance improvements required for DAS Studio
DAS-808 DAS Studio General Having DAS Studio and Standalone Compiler running at the same time cause crash on Windows 7
32-bit OS
DAS-814 DAS Studio General Removing a parameter from the ARINC-429 builder and reloading the XidML causes an error
DAS-844 DAS Studio General EBM102 crashes DS if RT-click on Source Name in Process tab
DAS-849 DAS Studio General Removing a module doesn't remove the parameters associated to the sinks
DAS-854 DAS Studio General ADC135 should have the channels with the same Filter Mode setup
DAS-989 DAS Studio General Task file with 2 KADVID106's in the same packet gives scheduling error
DOC-18 Studio Documentation tab scroll bar does not scroll smoothly
Documentation Tab
EGF-31 Eeprom Generation Default Calibration used even though module calibration information is available
Framework
EGF-9 Eeprom Generation UBM101 fails to capture data correctly in DAS Studio
Framework
FAL-133 Falcon (EEPROM Falcon generator for VID103B does not include Bit Rate or No of Ticks per Acq. cycle.
Generator)
FAL-149 Falcon (EEPROM EBM not set up correctly using package builder
Generator)
FAL-156 Falcon (EEPROM Destination MAC address is incorrect for 1 packet over 8
Generator)
FAL-167 Falcon (EEPROM To set up parsing on a CBM102 module you must explicitly create a new Parser Process in the
Generator) Process tab for each message being parsed and add a Package Reference to each Parser
Process manually.
FAL-188 Falcon (EEPROM The MBM101 does not parse data when the "Destination Sub Address" is set to "Any"
Generator)
FAL-192 Falcon (EEPROM MSB103C and MBM101 Stale and Skipped bits in MessageInfo parameter are not correct when
Generator) modules programmed by DAS Studio
FAL-244 Falcon (EEPROM VID103B and VID106 FIFO parameters shall be able to be placed irregularly into the PCM
Generator)
FOP-63 Studio File Windows 7: Exception occurred while trying to delete temporary backup when opening an existing
Operations task
HDF-111 hDefML File Error : No hDefML map entry found for value '12800'
MCS-122 Multi Chassis PBM104, incorrect Packets Per Second Calculation in DAS Studio 3.2.0
Scheduler
MCS-181 Multi Chassis Multi Chassis Scheduler generates an unsupported iNET-X packet on a BCU105 family module
Scheduler
MCS-199 Multi Chassis IP clash detection. When filter on EBM has dest ip which is already in use hence the transport
Scheduler packets are created with the same dest ip causing clash.
MCS-202 Multi Chassis Cannot compile 2 PCM with different shapes but with the same major frame rate
Scheduler
MCS-205 Multi Chassis Parameters from 'Slave' chassis are not transported into MAT101
Scheduler
MCS-95 Multi Chassis If a PCM package is manually added to a slave chassis; compiling causes a second PCM package
Scheduler to be added automatically. Compilation should stop if a previous package is detected before the
second package is generated
PB-83 Studio Package DAS Studio 3.3.6 - It is not possible to change the sampling in Ethernet once the parameter is
Builder placed in PCM
PKG-175 Studio Packages Unable to add fixed words under BCU settings
Tab General
PKG-463 Studio Packages Add PCM frame optimisation functionality to DAS Studio
Tab General
PKG-494 Studio Packages DAS Studio crashes when attempting to place a parameter in an Ethernet package in
Tab General non-contiguous mode
PKG-567 Studio Packages DAS Studio does not support the creation of fixed data words, i.e. in a controller module
Tab General
PKG-602 Studio Packages Removing module leaves behind reference in iNet-X package
Tab General
PKG-632 Studio Packages DAS Studio does not support the creation of fixed data words over Ethernet
Tab General
PKG-633 Studio Packages Object reference not set to an instance of an object error when adding bit stream package
Tab General
PRG-30 Studio Programmer NETSWI004C's 'Configuration' SNMP variable is failing to program with a low level package error
PRG-31 Studio Programmer Errors during SNMP programming do not give an overall programming failure
PRG-35 Studio Programmer Program may not work correctly from the command line if user has not set the command line paths
correctly
PRG-45 Studio Programmer Longitude and Latitude 48 bits registers are swapped on SSRCHS001B
SCS-136 Single Chassis Asynchronous DEC103 does not work in DAS Studio
Scheduler
SCS-207 Single Chassis Compiler crashes if run when a cache file is open in another program
Scheduler
SCS-392 Single Chassis There should be an error when packet size is more than maximum iNET-X size
Scheduler
SIP-1 Studio Instruments Ability to import through the palette a KAM-500 chassis populated with the modules and packages
Palette
SPC-79 Studio Power ABM103 Extension file power figures are out by a factor of 10
Calculator
SPG-9 Studio Package Grid Not all iNet-X packages have their header offsets 0-27 filled in the grid
SPP-27 Studio Packages Palette package: Generic tab should only display relevant packages to EBM module
Palette
SPP-9 Studio Packages Parameters Palette: Ctrl+A does not select all parameters available in the palette
Palette
SPPT-20 Studio Package UAR102 and UBM103: Parser option 'Message Length' unavailable in DAS Studio
Properties Table
SPPT-32 Studio Package Can't set 'End of packet' for IENA packages
Properties Table
SPRP-29 Studio Parameters When SSRCHS is connected to an Aggregator port of a switch you lose the ability to build packets
Palette with parameters from the SSRCHS modules
SPT-17 Studio Packages With multi-selected parameters in the package content table, using "shift" the table refreshes
Table
SPT-33 Studio Packages 'Update Many' in the content table is not intuitive
Table
SPT-34 Studio Packages 'Update Many' should detect parameters naming clash when updating multiple fields
Table
SUAR-8 Serial Builder When start sequence and package length are used to parse messages with the UAR102 these are
combined to determine the total length of the message
TFP-6 TFTP Programmer TFTP Programming failed but DAS Studio pop up states that it passed programming
XDF-128 xDefML File It is unclear which PMF Filter you are using for ENC106
XDF-142 xDefML File Setting <Name>Filter. Fifo Level-XX</Name> is not defined consistently in XdefML file of AMB
and MSB
XDF-164 xDefML File Typo in Channel Input BaseName="CamersSelect" rather than BaseName="CameraSelect"
XDF-175 xDefML File Brightness and PCAP CRC settings on NETREC001 need to be hidden as they have no effect
WARNING: Uninstall the previous version of KSM Tools before installing a new version.
KSM-500 Suite of tools will upgrade from KSM Tools only.
All KSM-500 Suite of Tools must be installed collectively.
All KSM-500 Suite of Tools must be uninstalled collectively.
Close any open Curtiss-Wright tools before installing/uninstalling other Curtiss-Wright tools.
Issue # Description
KBL-04 When changing the 'Tolerance' field, pressing the <CR> key should validate the value entered but does not
KBL-06 kBalance generates 4 backup files for one complete balance run instead of 1 backup file
KBL-07 kBalance never deletes any backup files nor deletes old iteration files
KBL-08 For a particular column add multiple row select-and-change functionality to kBalance
KBL-09 Under certain conditions, the two right-click mouse 'Balance Now' column menu items 'Check All' and 'Uncheck All' both
become unhighlighted
KBL-10 There is a mismatch between the number of iterations read from the message server and the number of iteration files
generated
KBL-16 If kBalance is interrupted by clicking the 'Stop' button, the final task file will not have the correct balance adjust settings
KBL-18 Loading the kBalance output file again in kSetup 1.7 removes some informative but unessential kBalance element information
KBL-22 kBalance fails to start on a ghosted PC with KSM500 suite of tools previously installed unless kSetup is run first
KBL-25 Only channels in the master controller's PCM frame can be balanced
KBL-70 Channels from Unicast address packet are not listed if packets with different Multicast addresses are in the system
KBL-86 kBalance gives error "Object reference not set to an instance of an object" if an ExpressCard/Ethernet adaptor is used
KBL-89 kBalance won't run unless all the hardware in the task file is present
Issue # Description
Issue # Description
KDC-46 Report HTML file reports DAU ID=0 instead of the IP address on a netw ork system w ith BCU/140s
KDC-48 Launching kDiscover in kSetup and then close it, w ill append the initial chassis to the project
kFlashCardXID 1.9
Issue # Description
KFC-85 Extracting 4GB of data (16000 samples per acq cycle ) in MAT-4 and MAT-5 fails
KFC-86 Extraction of 7805 events(each with 1280 samples) in MAT-5 and MAT-4 format is extremely slow (5min per event)
KFC-99 Parameter names extracted from kFlashCardXID are not the same as the parameters names setup in kSetup
KFC-111 kFlashcardXID exports MATLAB files with extra information from the strategy files
KFC-120 Error 70000 Unknown exception caught is shown when No space left on PC
KFC-141 On windows 7 kFlashcardXID CD auto-run won't enforce Administrator rights which causes an installation error
KFC-142 kFlashcard migration to newer version causes HRCHECK; VLC\utilscls.h warning pop up
Issue # Description
KFC-154 The datasheet should warn the user not to manipulate the FAT32 section of the compact flash
kProgram 1.18.1
Issue # Description
COR-203 Using Bit Mask on ABM101 Data parameter to make it 16 bits and inserting into IENA packet leads to error
COR-215 Swapping IP addresses on BCU140s in a task causes it to give errors during compilation
COR-299 cannot sink 4 bits for signal 'SYNCWORD_0' on sink f0971 - minimum bits 0
COR-301 DSI102B Period measurement setting Range below 1 second generates an error on compilation
COR-311 new master slave algorithm reads wrong word from DEC103
KPG-608 In Master slave configurations when multisink parameter has higher rate on slave's sink then on master it causes a failure in
compiler
KPG-711 KC should put a warning if the oversampling rate exceeds the MEM103 capabilities depending on the CF used
KPG-728 ACRA ERROR :: Number of samples per symbol must be even and greater than 10 (found 8)
KPG-733 compiler doesn't create an error when MEM uses more than 16KSamples per acquisition cycle
KPG-738 MCS Stale and Skip on PCM when parameter is sampled at 4096Hz
KPG-740 MCS report words in PCM do not show the same value than in the packets
KPG-746 ADC014 reports ACRA WARNING :: Module of type 0x0689 in slot J7 chassis 0 was not calibrated
KPG-829 ADC136C excitation current is wrong when programmed with KSM 500
KPG-830 cannot program a master-slave system if the master is powered off when using a SAMDEC008
KPG-831 kfetch fails running with a SAMDEC008 when a chassis is powered off
Issue # Description
KPG-765 EBM101 captures wrong Ethernet stream when a mix of MCS and 3party Ethernet stream
kQuicklook 8.1.1
Issue # Description
KQL-65 kQuicklook does not read the ETH packets configuration correctly - unicast multicast problem
KQL-74 No PCM lock with 33 Bit Sync word and fragmented parameters
KQL-83 kQuicklook setup hangs with Algorithm Destination element for MEM trigger
KQL-94 Sub-commutated parameters are not displayed correctly in Quicklook when SFID starts from 1
KQL-111 kQuicklook is failing to get a frame lock when frame has 2 15 bit parameters in 16 bit word with odd parity.
KQL-112 kQuicklook is failing to get a frame lock when frame has fragmented 16 bit parameters
KQL-117 Data Source Startup error: error setting SAMDEC sync mask for pattern... using 33 bit Syncword
KQL-129 kQuicklook installation screws up GSWorks (IADS for this case) installation
KQL-139 kQuickLook should be able to decom 10 bit plus odd parity data
KQL-149 KSM installer is confusing with regards to kQuicklook , and , the installer should check whether GS Works is already installed
KQL-155 PCAP replay is not very useful for kQuicklook because it only replays few minutes
KQL-160 Launching Quicklook from DAS Studio in Win 7 64bit causes a crash.
Issue # Description
KQL-133 kQuicklook doesn't get lock with 10 bits word size PCM
kSetup 1.18.1
Issue # Description
KSMI-29 Space in Non-Default location installation causes crash in all tools after installation
KSP-27 KADVID103 occupies two user module slots in a KAM-500 chassis, but kSetup shows only one occupied
KSP-249 KAMCDC101 6K and KAMCDC101 300 should not allow analog gain of 100 and 1000
KSP-298 MEM003 GUI should warn about the max 16376 parameters
KSP-402 The DEC003 imports an asynchronous PCM wrongly when there is only 1 word in the Syncword
KSP-408 kSetup may change the acquisition cycle after reloading it, if BCU105 is used
KSP-436 Fc for TDC002C and TDC002D differs - this issue cannot be fixed due to the Fc setting being totally different between these
modules
KSP-498 DAC002 and DAC001: Should not allow parameters > 16 bits to be sunk into the DAC
KSP-517 EBM101 Classification Locations fields with value "Not used" are not saved/retrieved correctly in/from the XidML in the
translation tools
KSP-565 FrameBuilder: cannot set start bit to 15 and stop bit to 6 when transmitting 10 bits
KSP-574 IENA package builder should not allow space on the package name
KSP-589 When a module is removed, packets in BCU105 and ETH modules should be resized automatically to take in account the
free gaps
KSP-616 DAC002 is not compiling if you do not double click on the DAC002 first in kSetup
KSP-651 Removing a module in kSetup leave the IENA packets empty in kSetup
KSP-712 IENA packet builder display "must be either ARP ..." which is incorrect
KSP-783 kSetup bitrate calculator does not calculate allowed bitrates when PMF output is enabled on ENC106
KSP-858 Parameter name duplication when multiple ARI001B and the same message name
KSP-870 XidML task can be verified successfully with kProgram but not from kSetup
KSP-951 kProgram fails compiling the MKMADC014 R1 when using an excitation current 1.6mA for PT-100
KSP-966 GUI module setup should prevent the user from entering an invalid parser ID
KSP-969 When setting up Modecode Mil-Std messages for MSB modules the mode for modecodes isn't allowed to be saved
KSP-972 IENA packets should be removed from the xidML after replacing the BCU105 to a BCU101
KSP-973 Frame Builder: Desired rate in PCM should be the same as the ARI001 rate
KSP-1001 The number of Parser slot payload data words can be configured to exceed 64 in the GUI
KSP-1033 Preference View Min/Max to Gain/Offset doesn't work for the ADC109CQB120 and QB350
KSP-1133 When using ABM101 with data and MEM103 the "overall samples per second " is not correct
KSP-1138 kDiscover fails to detect more than IRIG Time master from within kSetup and that would not allow to reload discovered file
KSP-1196 PCM Frame Builder Numerical Sort will not correctly sort parameters that start with a number
KSP-1197 Updating Message Name for a MSB103C message does not update the actual parameter names
KSP-1201 DSI102 parameter greater than 16 bits cannot be used as trigger on MEM
KSP-1202 When using for the first time kSetup, Save or Save As doesn't do anything
KSP-1203 Preferences view gain/offset or min/max do not work for the ADC109QB350
KSP-1259 UAR datalink reference in the package is not cross checked with the datalink name
KSP-1277 "Interconnect" instead of "InterConnect" in xidML causes a misleading error in the compiler
KSP-1286 ARI001: When adding a message with mode 'none' instead of data, kSetup fails to load task
KSP-1290 GUI reverts to incorrect channel for INET-X parser aligned packets.
KSP-1353 discover should tick automatically 'networked configuration' when user select BCU140B or later
KSP-1380 ARI001 When renaming messages which were defined with the same name xidml file cannot be loaded
KSP-1395 ADC111_10VET, ADC113BET and ADC118100mET are pointing to the non-ET corresponding modules
KSP-1398 Cannot save the end footer value of the IENA packet on a specific configuration
KSP-1423 ARI103B should have Info and Frame count parameters available
KSP-1457 CBM102 renaming the message name should rename the datawords parameter name defaults
KSP-1474 ADC-013-E and ADC-113-B failed to verify a configuration that should verify
KSP-1512 Should be a warning when the bit rate is lower than what allowed PMF
KSP-1551 Video from VID106 is not working if the video word index in PCM is not in the correct order
KSP-1581 xidML file can be loaded into kSetup but create a compile error because the word count is not sourced
KSP-1583 UBM103 user can set more than 1 byte for the stop pattern
KSP-1591 EBM10x binary mode doesn't get loaded/saved properly - way around force saving in the kSetup database then program
through kSetup
TLT-108 kXidML2Db Fail to load database driver on SP3 for PBM modules.
Issue # Description
KSP-1546 KSM-500 does not create LEAP_SECONDS correctly in XID for the TCG-102-D
KSP-1582 MSB103 ACRA ERROR :: mode PARSER or connection MESSAGE_COUNT is not valid for signal
TLT-135 ParserDataWordEndianness remains to LittleEndian in the XID file even though it was set to one word per byte
kTimeseed 1.6.1
Issue # Description
KTS-7 Having more than one RTC module in a chassis causes the second module to be time seeded only
KTS-12 kTimeseed doesn’t seed accurately the PC time via BCU/105 and BCU/101 modules
KTS-13 kTimeseed does not recognize RTC/003 module in chassis with ENC/004 controller
Issue # Description
kValidate 2.0
Issue # Description
KVD-86 Errors are reported by kValidate for VendorMap signals TimeHi, TimeLo and TimeMicro on MSB modules
KVD-112 Attached test file generates error in kValidate but compiles successfully (verify mode) with kProgram
KVD-117 kValidate doesn't generate an error if the xidML contains more than 126 messages for a CBM/102 bus
KVD-139 kValidate reports 42 errors but the xidML was generated by kSetup
KVD-166 kValidate is taking the wrong module slots when a module uses 2 slots
kWorkbench 3.3
Issue # Description
Issue # Description
Issue # Description
FPO-27 PCM Placer should take into account parameters coming from a network
FPO-30 PCM Placer may throw an Internal Error, Unknown Exception when trying to optimize a specific PCM frame
FPO-32 In a network system, PCM Placer should not sort per chassis ID
X-Report 2.0
Issue # Description
XRP-10 The style sheets should be updated to display XidML files in a clearer format.
XRP-13 Add a style sheet to tabulate the messages in MsgML output file for each tool.
X-Validate 2.0
Issue # Description
XVD-67 X-Validate does not get names of XidML files in the same way as kXidML2Db
XVD-69 X-Validate generates very misleading error message when analog-in channels are named incorrectly
XVD-70 Error message generates a lot of superfluous information. The error messages also appear to be repeated multiple times for
each package
XVD-73 Info 15019 is not displayed (should be removed from data sheet)
XVD-81 The 'task file’ field should contain the previous setting for path and filename but instead it keeps defaulting to.
\Tasks\MyTask.xml
GS Works 8
GSW-203 GS Works Repetitive warning after migrating to newer GS Works version on Win 7 64bit
GSW-201 GS Works VID103 12bit video in KSM does not display video in GS Works
GSW-198 GS Works Save issue when not using the same directory for data and config file
GSW-197 GS Works VID103 and VID106 use different codecs in GS Works decom
GSW-196 GS Works Event Messages from recorder event packets are not working correctly
GSW-195 GS Works GS Works crashes when opening a task with IENA in xidml3.0
GSW-193 GS Works 32-bit parameters in PCM frame in DAS Studio display zero in GS Works
GSW-189 GS Works On some PCs GS Works plays back only short portion of a PCAP file
GSW-187 GS Works iNetX packets are displayed with IENA tag in GS Works
GSW-186 GS Works GS Works does not support 12 bits video using VID/106
GSW-159 GS Works MEM/x03 – GS Works dashboard does not update with GPS time during CF playback
GSW-150 GS Works GS Works does not use DOY when taking time from BCU/140 as time base for MEM/103
GSW-128 GS Works GS Works cannot handle the same parameter being placed in different packets
GSW-105 GS Works GS Works does not take isochronous sampling for time alignment. As a result the same sine wave on 2 ADCs
in different chassis is not aligned as expected.
GSW-94 GS Works GS Works cannot be started before packets are received over the network.
GSW-93 GS Works NET/REC Event Marking Packets in GS Works when reading PCAP files
GSW-92 GS Works GS Works is not fully supported on Windows 7 due to no SAMDEC driver for Win 7 OS 64 bits
GSW-67 GS Works Ensure recommended packet rate is set for 12 bit CVSD audio over Ethernet
GSW-48 GS Works GS Works does not support Xidml prior to version 2.41.
GSW-47 GS Works GTS/DEC Install Instructions.doc references SDK when no SDK is installed with GS Works
GSW-45 GS Works GTS/DEC/004 – GS Works displays correctly when Decom is selected and input is applied to Bit Sync
GSW-44 GS Works GS Works does not sync with incoming digital time GTS/DEC/004
GSW-43 GS Works GS Works time and digital input embedded time into the VID/103 differs by less than 2 secs
GSW-26 GS Works Time parameters are not available in the "Parameter tool" in GS Works when getting data from a MEM/003
GSW-23 GS Works GS Works does not support mixed word lengths for the SAM/DEC/007 PCM data source.
GSW-22 GS Works GS Works does not support parity for a SAM/DEC/007 PCM data source. 12 bit odd parity does not achieve lock.
GSW-17 GS Works PCM Polarity setting in Xidml file is not reflected in the Setup for the GTS/DEC/00x cards.
GSW-16 GS Works DCLKPhase setting in Xidml file is not acted on in the setup for the GTS/DEC/00x card.
GSW-13 GS Works Some additional GTS/DEC/00x settings are not being displayed
GSW-9 GS Works Not getting synchronization from packets coming from 2 different systems until I reload GS Works
GSW-2 GS Works Data Source Start-up error: error setting SAMDEC sync mask for pattern... using 33 bit Sync word (PCM only)
GSW-180 GS Works GS Works gives error and crashes when a VID/106 "MPEG 2 Transport Stream
packetized package" is in the Xidml file
GSW-169 GS Works KSM VID IENA and ARINC iNetx packets not opening in GS Works
GSW-168 GS Works GS Works deletes all files and folders in the destination directory chosen for
the GS Works session
GSW-162 GS Works DSI/102 and DSI/102/B 32-bit parameters cause problems for GS Works
GSW-160 GS Works Parameters greater than 32-bits do not display correctly in GS Works
GSW-158 GS Works Package Name & Port Number are not updated in IADS wizard when launched from DAS Studio Quicklook
application
GSW-149 GS Works Install shield final window references DAS Studio instead of GS Works
GSW-148 GS Works GS Works : IADS application has encountered an error and need to close for a specific xidML3.0 file
GSW-145 GS Works 32-bit parameters in iNetX packet give an error and do not display in GS Works
GSW-143 GS Works GS Works should not look for Ground Station (SDK) in specific location
GSW-139 GS Works GS Works will not open xidml 3.0 task files that contain packetizer packets.
GSW-131 GS Works GS Works doesn't get any Ethernet packets if the timestamp in the packets is
older than the PC time
GSW-130 GS Works GS Works will not launch if computer is not connected to the network
GSW-129 GS Works GSWorks doesn't get lock with 10 bits word size PCM
GSW-104 GS Works GS Works does not launch if KSM-500 is not installed (GS Works is looking for ASDx32w.dll)
GSW-57 GS Works GS Works installer, remove '\n' from last line last dialog
GSW-55 GS Works Launching Real-time Client before entering licence key displays IADS splash screen
GSW-35 GS Works IADS only supports IENA packets going to one destination
GSW-33 GS Works GS Works fails to load a file with a DEC/003 in async mode
GSW-11 GS Works _IadsDecomStatus0_ parameter is not applicable for IENA data source but it is always shown in the
Parameter Tool
GSW-3 GS Works Multiple IENA packages with multiple parameters in each package, not sub categorized by package
Issue # Description
GDSDK-1 Device manager recognizes GTSDEC as "Jungo" device not as "ACRA" device.
GDSDK-14 Ground Station API should allow setting of the "Name" on FrameWords in a PCM Package.
GDSDK-15 System Definition API does not support setting up a Major Frame.
GDSDK-36 SDK Installer always installs "MicrosoftWindowsInstaller 3.1" regardless of whether or not it was already installed.
GDSDK-72 When uninstalling the SDK the .NET framework is installed again before an option is given to remove the SDK.
GDSDK-182 GTS SDK SystemDefinitionAPI does not allow manipulating major frame of PCM.
GDSDK-178 GTS SDK Need to be able to retrieve part reference from type number.
GDSDK-161 GTS SDK Out of lock (LossStatusCount) when testing GTS/DEC/005/C with 20M, NRZ-L and Bit-sync. This
is none issue when using Borland C++ sample code.
GDSDK-157 GTS SDK Overflow at SDK Ring Buffers occurs when going above 6.5MHz. This is none issue when using
Borland C++ sample code.
GDSDK-149 GTS SDK Function to return the card serial number is required.
GDSDK-36 GTS SDK SDK Installer always installs "MicrosoftWindowsInstaller 3.1" regardless of whether or not it was
already installed. This will affect the installation time.
GDSDK-15 GTS SDK SystemDefinitionAPI: Does not support setting up Major Frames.
GDSDK-177 GTS SDK SystemDefinitionAPI writes '0,2' instead of '0.2' at 'Acquisition Loop Bandwidth' which make it failed
to be read.
GDSDK-176 GTS SDK SystemDefinitionAPI failed to read XidML when it contains 'Generic PC'.
Module kSetup 1.18.1 kSetup 1.17 kSetup 1.16.1 kSetup 1.16 kSetup 1.15 kSetup 1.14
KAD/ABM/101 Y Y Y Y Y Y
KAD/ABM/102 Y Y Y Y Y N
KAD/ABM/102/B Y Y Y Y N N
KAD/ABM/102/X1 Y Y N N N N
KAD/ABM/103 Y Y N N N N
KAD/ADC/001 Y Y Y Y Y Y
KAD/ADC/002/B/100m Y Y Y Y Y Y
KAD/ADC/002/B/1V Y Y Y Y Y Y
KAD/ADC/002/C/100m Y Y Y Y Y Y
KAD/ADC/002/C/10V Y Y Y Y Y Y
KAD/ADC/002/C/1V Y Y Y Y Y Y
KAD/ADC/003 Y Y Y Y Y Y
KAD/ADC/005 Y Y Y Y Y Y
KAD/ADC/006 Y Y Y Y Y Y
KAD/ADC/008 Y Y Y Y Y Y
KAD/ADC/009/QB100 Y Y Y Y Y Y
KAD/ADC/009/QB350 Y Y Y Y Y Y
KAD/ADC/009/S1 Y Y Y Y Y Y
KAD/ADC/009/S2 Y Y Y Y Y Y
KAD/ADC/009/S4 Y Y Y Y Y Y
KAD/ADC/010/C Y Y Y Y Y Y
KAD/ADC/011/B/10V Y Y Y Y Y Y
KAD/ADC/011/B/40V N N N N N N
KAD/ADC/011/B/X1 N N N N N N
KAD/ADC/011/C/10V Y Y Y Y Y Y
KAD/ADC/011/C/40V Y Y Y Y Y Y
KAD/ADC/011/C/X1 Y Y Y Y Y Y
KAD/ADC/012/B/100m Y Y Y Y Y Y
KAD/ADC/012/B/10V Y Y Y Y Y Y
KAD/ADC/012/B/40V Y Y Y Y Y Y
KAD/ADC/012/C/100m Y Y Y Y Y Y
KAD/ADC/012/C/10V Y Y Y Y Y Y
KAD/ADC/012/C/1V Y Y Y Y Y Y
KAD/ADC/012/C/40V Y Y Y Y Y Y
KAD/ADC/013/B Y Y Y Y Y Y
KAD/ADC/013/C Y Y Y Y Y Y
KAD/ADC/013/D Y Y Y Y Y Y
KAD/ADC/013/D/HR N N N N N N
KAD/ADC/013/E Y Y Y Y Y Y
KAD/ADC/014/B/100m Y Y Y Y Y Y
KAD/ADC/014/B/10V Y Y Y Y Y Y
KAD/ADC/014/B/1V Y Y Y Y Y Y
KAD/ADC/014/C/100m Y Y Y Y Y Y
KAD/ADC/014/C/10V Y Y Y Y Y Y
KAD/ADC/014/C/1V Y Y Y Y Y Y
KAD/ADC/014/D/100m Y Y Y Y Y Y
KAD/ADC/014/D/10V Y Y Y Y Y Y
KAD/ADC/014/D/1V Y Y Y Y Y Y
KAD/ADC/014/D/25m Y Y Y Y Y Y
KAD/ADC/017 Y Y Y Y Y Y
KAD/ADC/017/AB1/ET Y Y Y Y Y Y
KAD/ADC/021 Y Y Y Y Y Y
KAD/ADC/021/RT Y Y Y Y Y Y
KAD/ADC/105 Y Y Y Y Y Y
KAD/ADC/105/B Y Y Y Y Y Y
KAD/ADC/106 Y Y Y Y Y Y
KAD/ADC/106/B Y Y Y Y Y Y
KAD/ADC/106/C Y Y Y Y Y Y
KAD/ADC/109/B/QB120 Y Y Y Y Y Y
KAD/ADC/109/B/QB350 Y Y Y Y Y Y
KAD/ADC/109/B/S1 Y Y Y Y Y Y
KAD/ADC/109/B/S2 Y Y Y Y Y Y
KAD/ADC/109/C/QB120 Y Y Y Y Y Y
KAD/ADC/109/C/QB350 Y Y Y Y Y Y
KAD/ADC/109/C/S1 Y Y Y Y Y Y
KAD/ADC/109/C/S2 Y Y Y Y Y Y
KAD/ADC/109/S1 Y Y Y Y Y Y
KAD/ADC/111/10V Y Y Y Y Y N
KAD/ADC/111/10V Y Y N N N N
KAD/ADC/111/10V/ET Y Y N N N N
KAD/ADC/111/40V Y Y Y Y Y N
KAD/ADC/111/40V Y Y N N N N
KAD/ADC/112/100m Y Y Y Y Y Y
KAD/ADC/112/10V Y Y Y Y Y Y
KAD/ADC/112/1V Y Y Y Y Y Y
KAD/ADC/112/40V Y Y Y Y Y Y
KAD/ADC/113 Y Y Y Y Y Y
KAD/ADC/113/B Y Y Y Y Y Y
KAD/ADC/113/B/ET Y Y N N N N
KAD/ADC/114/100m Y Y Y Y Y Y
KAD/ADC/114/10V Y Y Y Y Y Y
KAD/ADC/114/1V Y Y Y Y Y Y
KAD/ADC/115 Y N N N N N
KAD/ADC/116/10V Y Y Y Y Y Y
KAD/ADC/116/10VNE Y Y Y Y Y Y
KAD/ADC/116/1V Y Y Y Y Y Y
KAD/ADC/117 Y Y Y Y Y Y
KAD/ADC/117/B Y Y Y Y Y Y
KAD/ADC/117/B/E12 Y Y Y Y Y Y
KAD/ADC/117/E12 Y Y Y Y Y Y
KAD/ADC/117/EC1 Y Y Y Y Y Y
KAD/ADC/118/100m Y Y Y Y Y Y
KAD/ADC/118/100M/ET Y Y N N N N
KAD/ADC/118/10V Y Y Y Y Y Y
KAD/ADC/118/1V Y Y Y Y Y Y
KAD/ADC/120/100m Y Y Y Y Y Y
KAD/ADC/120/10V Y Y Y Y Y Y
KAD/ADC/120/1V Y Y Y Y Y Y
KAD/ADC/126 Y Y Y Y Y Y
KAD/ADC/126/B Y Y Y Y Y Y
KAD/ADC/129/S1 Y Y Y Y Y Y
KAD/ADC/129/S2 Y Y Y Y Y Y
KAD/ADC/134/100M Y Y Y Y N N
KAD/ADC/134/100M Y Y Y N N N
KAD/ADC/134/10V Y Y Y N N N
KAD/ADC/134/10V Y Y Y Y N N
KAD/ADC/134/1V Y Y Y N N N
KAD/ADC/134/1V Y Y Y Y N N
KAD/ADC/135 Y Y Y Y N N
KAD/ADC/135/E12 Y Y Y Y N N
KAD/ADC/136 Y Y N N N N
KAD/ADC/136 Y Y Y N N N
KAD/ADC/136/B Y N N N N N
KAD/ADC/136/B/E12 Y N N N N N
KAD/ADC/136/C Y N N N N N
KAD/ADC/136/C/E12 Y N N N N N
KAD/ADC/136/E12 Y Y Y N N N
KAD/ADC/136/E12 Y Y N N N N
KAD/ADC/141 Y N N N N N
KAD/ARI/001 Y Y Y Y Y Y
KAD/ARI/001/B Y Y Y Y Y Y
KAD/ARI/002 Y Y Y Y Y Y
KAD/ARI/103 Y Y Y Y Y Y
KAD/ARI/103/B Y Y Y Y N N
KAD/ARR/101 Y Y Y Y Y Y
KAD/BCU/001 Y Y Y Y Y Y
KAD/BCU/001/B Y Y Y Y Y Y
KAD/BCU/001/CX Y Y Y Y Y Y
KAD/BCU/003 Y Y Y Y Y N
KAD/BCU/003/B Y Y Y Y Y N
KAD/BCU/101 Y Y Y Y Y Y
KAD/BCU/101/B Y Y Y Y Y Y
KAD/BCU/101/C Y Y Y Y Y Y
KAD/BCU/101/D Y Y Y Y Y Y
KAD/BCU/101/E Y Y Y Y Y N
KAD/BCU/102 Y Y Y Y Y Y
KAD/BCU/102/B Y Y Y Y Y Y
KAD/BCU/104 N N N N N N
KAD/BCU/105/B Y Y Y Y Y Y
KAD/BCU/105/C Y Y Y Y Y Y
KAD/BCU/105/C/AB1/ET Y Y Y Y Y Y
KAD/BCU/105/C/AB2/ET N N N N N N
KAD/BCU/105/D Y Y Y Y Y Y
KAD/BCU/105/D/AB1/ET Y Y Y Y Y Y
KAD/BCU/105/D/AB2/ET Y Y Y Y Y Y
KAD/BCU/105/E Y Y Y Y Y N
KAD/BCU/105/E/AB1/ET Y Y Y Y Y N
KAD/BCU/105/E/AB2/ET Y Y Y Y Y N
KAD/BCU/140/A Y Y Y Y Y Y
KAD/BCU/140/B Y Y Y Y N N
KAD/BCU/140/C Y Y Y Y N N
KAD/BCU/140/D Y N N N N N
KAD/BCU/140/D/ET Y N N N N N
KAD/BCU/140/x1 Y Y Y Y Y N
KAD/BCU/142 Y Y Y Y N N
KAD/BCU/142/B Y N N N N N
KAD/BCU/142/ET Y Y N N N N
KAD/BCU/143 Y Y N N N N
KAD/BCU/145 Y Y N N N N
KAD/BCU/145/B Y N N N N N
KAD/BIT/101 Y Y Y Y Y Y
KAD/CBC/101 Y Y Y Y Y Y
KAD/CBC/102 N N N N N N
KAD/CBI/101 N N N N N N
KAD/CBM/101 Y Y Y Y Y Y
KAD/CBM/102 Y Y Y Y Y Y
KAD/CBM/102/B Y Y Y Y Y Y
KAD/CBM/103 N N N N N N
KAD/CBM/104 N N N N N N
KAD/CBM/105 Y Y Y Y Y N
KAD/CDC/002 Y Y Y Y Y Y
KAD/CDI/101 Y Y Y Y Y Y
KAD/DAC/001 Y Y Y Y Y Y
KAD/DAC/001/B Y Y Y Y Y Y
KAD/DAC/002 Y Y Y Y Y Y
KAD/DAC/002/B Y Y Y Y Y N
KAD/DEC/002 Y Y Y Y Y Y
KAD/DEC/003 Y Y Y Y Y Y
KAD/DEC/103 Y Y Y Y Y Y
KAD/DPI/002 Y Y Y Y Y Y
KAD/DSI/002 Y Y Y Y Y Y
KAD/DSI/003 Y Y Y Y Y Y
KAD/DSI/003/B Y Y Y Y Y Y
KAD/DSI/004/28V Y Y Y Y Y Y
KAD/DSI/102 Y Y Y Y Y Y
KAD/DSI/102/B Y Y Y Y Y N
KAD/DSI/104/28V Y Y Y Y Y Y
KAD/DSI/104/5V Y Y Y Y Y Y
KAD/DSI/105 Y Y Y Y Y Y
KAD/EBM/101 Y Y Y Y Y Y
KAD/EBM/101/B Y Y Y Y Y Y
KAD/EBM/102 Y Y Y Y Y Y
KAD/ENC/004 Y Y Y Y Y Y
KAD/ENC/004/B N N N N N N
KAD/ENC/005 Y Y Y Y Y Y
KAD/ENC/005/B Y Y Y Y Y Y
KAD/ENC/005/B/RS Y Y Y Y Y Y
KAD/ENC/006/HA1 Y Y Y Y Y Y
KAD/ENC/006/HA2 N N N N N N
KAD/ENC/006/HA3 N N N N N N
KAD/ENC/006/HA4 N N N N N N
KAD/ENC/006/X1 Y Y Y Y Y Y
KAD/ENC/006/X2 Y Y Y Y Y Y
KAD/ENC/006/X5 Y Y Y Y Y Y
KAD/ENC/106 Y Y Y Y Y Y
KAD/ENC/111 N N N N N N
KAD/ETH/001/B Y Y Y Y Y Y
KAD/ETH/001/C Y Y Y Y Y Y
KAD/ETH/101 Y Y Y Y Y Y
KAD/ETH/101/B Y Y Y Y Y Y
KAD/ETH/102 Y Y Y Y Y N
KAD/EXC/101 Y N N N N N
KAD/FBM/102 Y Y Y Y Y Y
KAD/FBM/103 Y Y Y Y Y Y
KAD/FBM/103/B Y Y Y Y Y Y
KAD/FBM/105 Y Y Y N N N
KAD/FBM/105 Y Y Y Y N N
KAD/LDC/101/10k Y Y Y Y Y Y
KAD/LDC/101/2.5K Y Y Y Y Y Y
KAD/LDC/101/400 Y Y Y Y Y N
KAD/LDC/101/5k Y Y Y Y Y Y
KAD/MAT/001/B Y Y Y Y Y Y
KAD/MBI/001 N N N N N N
KAD/MBI/001/B N N N N N N
KAD/MBI/103 N N N N N N
KAD/MBI/103/B Y Y Y Y Y N
KAD/MBM/101 Y Y Y Y Y N
KAD/MBM/102 Y N N N N N
KAD/MDC/001 Y Y Y Y Y Y
KAD/MDC/002 Y Y Y Y Y Y
KAD/MDC/103 Y Y Y Y Y Y
KAD/MDC/104 Y Y Y Y Y Y
KAD/MEM/004/4G Y Y Y Y Y Y
KAD/MEM/004/B/12G Y Y Y Y Y Y
KAD/MEM/004/B/24G Y Y Y Y Y Y
KAD/MEM/004/B/4G Y Y Y Y Y Y
KAD/MEM/004/B/6G Y Y Y Y Y Y
KAD/MEM/103 Y Y Y Y Y Y
KAD/MEM/4/B/32G Y Y Y Y Y N
KAD/MSB/001 Y Y Y Y Y Y
KAD/MSB/001/B Y Y Y Y Y Y
KAD/MSB/003 Y Y Y Y Y Y
KAD/MSB/003/B Y Y Y Y Y Y
KAD/MSB/103 Y Y Y Y Y Y
KAD/MSB/103/B Y Y Y Y Y Y
KAD/MSB/103/C Y Y Y Y Y Y
KAD/PBM/001 Y Y Y Y Y Y
KAD/PBM/002 Y Y Y Y Y Y
KAD/PBM/002/BA1 Y Y Y Y Y Y
KAD/PDC/001 Y Y Y Y Y Y
KAD/PDC/001/ET Y Y Y Y Y Y
KAD/RDC/101 N N N N N N
KAD/RDC/101/26R N N N N N N
KAD/RTC/003 Y Y Y Y Y Y
KAD/SBC/101 N N N N N N
KAD/SBM/101 Y Y Y Y Y N
KAD/SBM/102 Y Y Y Y Y Y
KAD/SBM/102/B Y Y Y Y Y Y
KAD/SDC/001 Y Y Y Y Y Y
KAD/SDC/002/90V Y Y Y Y Y Y
KAD/SDC/101 N N N N N N
KAD/SDC/103 N N N N N N
KAD/SDI/001 Y Y Y Y Y Y
KAD/SDI/103 Y Y Y Y Y Y
KAD/SDI/103/B Y Y Y Y Y Y
KAD/SIG/101 Y Y Y Y Y Y
KAD/SWI/101 Y Y Y Y Y Y
KAD/SWI/102 N N N N N N
KAD/SWI/103 Y Y Y Y Y N
KAD/SWI/107 Y Y Y Y Y N
KAD/SWI/108 Y Y Y N N N
KAD/SWI/108 Y Y Y Y N N
KAD/TBM/101 N N N N N N
KAD/TCG/001 Y Y Y Y Y Y
KAD/TCG/001/B Y Y Y Y Y Y
KAD/TCG/001/C Y Y Y Y Y Y
KAD/TDC/001/10k Y Y Y Y Y N
KAD/TDC/001/2k2 Y Y Y Y Y N
KAD/TDC/002 N N N N N N
KAD/TDC/002/C Y Y Y Y Y Y
KAD/TDC/002/C/ET Y Y Y Y Y Y
KAD/TDC/002/D Y Y Y Y Y Y
KAD/TDC/002/D/10m Y Y Y Y Y Y
KAD/TDC/002/D/ET Y Y Y Y N N
KAD/TDC/002/D/ET Y Y Y N N N
KAD/TDC/004 Y Y Y Y Y Y
KAD/TDC/004/ET Y Y Y Y Y Y
KAD/TDC/005 Y Y Y Y Y Y
KAD/TDC/006 Y Y Y Y Y Y
KAD/TDC/006/RT Y Y Y Y Y Y
KAD/TDC/102 Y Y Y Y Y Y
KAD/TDC/102/B Y Y Y Y Y N
KAD/TDC/102/B/SN1 Y Y Y Y N N
KAD/TDC/102/B/SN1 Y Y Y N N N
KAD/TDC/102/CAL Y Y Y Y Y Y
KAD/TDC/107 Y Y Y Y Y Y
KAD/TDC/108 N N N N N N
KAD/TDC/109 N N N N N N
KAD/UAR/001 Y Y Y Y Y Y
KAD/UAR/002/B Y Y Y Y Y Y
KAD/UAR/002/C Y Y Y Y Y Y
KAD/UAR/102 Y Y Y Y Y Y
KAD/UAR/102/B Y Y Y Y Y Y
KAD/UAR/102/C Y Y Y Y Y N
KAD/UAR/102/X1 Y Y Y Y Y Y
KAD/UAT/101 Y Y Y Y Y Y
KAD/UBM/101 Y Y Y Y Y N
KAD/UBM/103 Y N N N N N
KAD/UBM/105 Y N N N N N
KAD/UTL/102 Y Y Y Y Y Y
KAD/UTL/102/X1 Y Y Y Y Y Y
KAD/UTL/102/X2 Y Y Y Y Y Y
KAD/UTL/106 N N N N N N
KAD/VDC/001 Y Y Y Y Y Y
KAD/VID/103 Y Y Y Y Y Y
KAD/VID/103/B Y Y Y Y Y Y
KAD/VID/103/C Y Y Y Y Y N
KAD/VID/106 Y Y Y Y Y N
KAD/VID/106 N N N N N N
KAD/WSI/101 Y Y Y Y Y Y
KAM/ADC/004 Y Y Y Y Y Y
KAM/BIT/102 Y Y Y Y Y N
KAM/CDC/001 Y Y Y Y Y Y
KAM/CDC/001/C Y Y Y Y Y Y
KAM/CDC/101/150 N N N N N N
KAM/CDC/101/300 Y Y Y Y Y Y
KAM/CDC/101/6K Y Y Y Y Y Y
KAM/CDC/101/750 N N N N N N
KAM/FBM/001 N N N N N N
KAM/FBM/001/B Y Y Y Y Y Y
KAM/MEM/003 Y Y Y Y Y Y
KAM/MEM/003/B Y Y Y Y Y Y
KAM/MEM/003/C Y Y Y Y Y Y
KAM/MEM/003/D Y Y Y Y Y Y
KAM/MEM/003/E Y Y Y Y Y Y
KAM/MEM/103/B Y Y Y Y Y Y
KAM/MEM/103/C Y N N N N N
KAM/MEM/113 Y N N N N N
KAM/REC/04C Y Y Y Y Y N
KAM/REC/04S Y Y Y Y Y N
KAM/RTC/002 Y Y Y Y Y Y
KAM/SBM/001 Y Y Y Y Y Y
KAM/TCG/102 Y Y Y Y Y Y
KAM/TCG/102/B Y Y Y Y Y Y
KAM/TCG/102/C Y Y Y Y Y Y
KAM/TCG/102/D Y Y Y Y Y Y
KAM/TCG/103 Y Y N N N N
KAM/TCG/105 Y N N N N N
KAM/UAR/002 Y Y Y Y Y Y
MKM/ADC/014/R1 Y Y Y Y Y Y
MKM/ADC/014/R2 N N N N N N
MKM/ADC/014/R3 Y Y Y Y Y Y
MKM/ADC/114/AL1 Y Y Y Y Y Y
MKM/BCU/101 Y Y Y Y Y Y
MKM/BCU/101/B Y Y Y Y Y Y
MKM/BCU/101/D Y Y Y Y Y Y
MKM/UAR/102 Y Y Y Y Y Y
NET/REC/001 N N N N N N
NET/REC/001/B N N N N N N
NET/REC/002 N N N N N N
NET/REC/003 N N N N N N
NET/REC/004 N N N N N N
NET/REC/005 N N N N N N
NET/REC/006 N N N N N N
NET/SWI/001 N N N N N N
NET/SWI/002 N N N N N N
NET/SWI/003 N N N N N N
NET/SWI/004 N N N N N N
NET/SWI/004/B N N N N N N
NET/SWI/004/EM1 N N N N N N
NET/SWI/005 N N N N N N
NET/SWI/006 N N N N N N
NET/SWI/009 N N N N N N
NET/TAP/001 N N N N N N
SER/BCU/140 N N N N N N
SER/REC/002 N N N N N N
SER/TCG/001 N N N N N N
SER/TCG/002 N N N N N N
SER/VDC/001 N N N N N N
SER/VDC/002 N N N N N N
SSR/ABM/102 N N N N N N
SSR/ADC/126/B N N N N N N
SSR/CHS/001 N N N N N N
SSR/CHS/001/B N N N N N N
SSR/CHS/001/B Y Y Y Y Y N
SSR/CHS/001/B/NFE N N N N N N
SSR/CHS/001/C Y Y Y Y N N
SSR/CHS/002 Y Y Y Y Y N
SSR/CHS/003 N N N N N N
SSR/CHS/004 N N N N N N
SSR/CHS/005 N N N N N N
SSR/MBM/101 N N N N N N
SSR/PBM/104 Y Y Y Y Y N
SSR/REC/001 N N N N N N
SSR/VID/103/B N N N N N N
Module
KAD/ARI/001
Module
KAD/BCU/001
KAD/ADC/001
KAD/BCU/001/B
KAD/ADC/002/B/100m
KAD/BCU/001/CX
KAD/ADC/002/B/1V
KAD/BCU/003
KAD/ADC/002/C/100m
KAD/BCU/003/SB
KAD/ADC/002/C/10V
KAD/BCU/101
KAD/ADC/002/C/1V
KAD/BCU/101/B
KAD/ADC/003
KAD/BCU/102
KAD/ADC/003/B
KAD/BCU/102/B
KAD/ADC/005
KAD/BCU/104
KAD/ADC/006
KAD/BCU/105
KAD/ADC/009/QB100
KAD/BCU/105/B
KAD/ADC/009/QB350
KAD/BCU/105/C/AB1/ET
KAD/ADC/009/S1
KAD/CBC/101
KAD/ADC/009/S2
KAD/CBC/102
KAD/ADC/009/S4
KAD/CBI/101
KAD/ADC/010/B
KAD/DAC/001
KAD/ADC/010/C
KAD/DAC/002
KAD/ADC/011/B/X1
KAD/DAC/002/B
KAD/ADC/011/C/X1
KAD/DEC/002
KAD/ADC/013/B
KAD/DPI/002
KAD/ADC/013/D
KAD/DSI/003
KAD/ADC/017
KAD/ENC/004
KAD/ADC/017/AB1/ET
KAD/ENC/004/B/ET
KAD/ADC/021
KAD/ENC/004/ET
KAD/ADC/021/RT
KAD/ENC/005
KAD/ADC/106
KAD/ENC/005/B/RS
KAD/ADC/106/B
KAD/ENC/006/HA1
KAD/ADC/109/S1
KAD/ENC/006/HA2
KAD/ADC/113
KAD/ENC/006/HA3
KAD/ADC/117
KAD/ENC/006/HA4
KAD/ADC/117/E12
KAD/ENC/006/X1
KAD/ADC/126
KAD/ENC/006/X2 KAD/TDC/002/C/ET
KAD/ENC/006/X5 KAD/TDC/004
KAD/ETH/001/B KAD/TDC/004/ET
KAD/ETH/001/C KAD/TDC/005
KAD/LDC/001/01 KAD/TDC/006
KAD/MAT/001/B KAD/TDC/006/RT
KAD/MBC/001 KAD/UAR/001
KAD/MBI/001 KAD/UAR/002/B
KAD/MBI/001/B KAD/UAR/002/C
KAD/MBI/102/00 KAD/UAR/003
KAD/MBI/103 KAD/UAT/101
KAD/MDC/001 KAD/UTL/001
KAD/MDC/002 KAD/UTL/102
KAD/MDC/104 KAD/UTL/102/X1
KAD/MEM/004/4G KAD/UTL/102/X2
KAD/MSB/001 KAM/ADC/004
KAD/MSB/001/B KAM/ADC/004/05/FB/350
KAD/MSB/002/B KAM/ADC/009/S1/5KHZ
KAD/MSB/003 KAM/ADC/009/S2/ET/MA
KAD/MSB/003/B KAM/ADC/011/10V
KAD/MSB/103 KAM/ADC/012/10V
KAD/PBM/002 KAM/ADC/013
KAD/PBM/002/BA1 KAM/ADC/014/10V
KAD/PDC/001 KAM/ADC/019/100
KAD/PDC/001/ET KAM/CDC/001
KAD/RTC/002 KAM/CDC/001/B
KAD/SBC/101 KAM/CDC/001/C
KAD/SDC/002/90V KAM/DPI/001
KAD/SDI/001 KAM/ENC/002
KAD/SIG/101 KAM/ENC/003
KAD/TCG/001 KAM/ENC/006
KAD/TCG/001/B KAM/ENC/006/X3
KAD/TDC/001/10K KAM/ENC/006/X4
KAD/TDC/001/2K2 KAM/ENC/007
KAD/TDC/002/ET/00 KAM/FBM/001
KAD/TDC/002/B/00 KAM/MAT/001/00
KAD/TDC/002/B/ET/00 KAM/MEM/001
KAM/MEM/002/00
KAM/MEM/003
KAM/MEM/003/B
KAM/MEM/003/C
KAM/MEM/003/D
KAM/MEM/003/E
KAM/MSB/002
KAM/MSB/002/B/TC/
KAM/TCG/102
KAM/TCG/102/B
KAM/TDC/003
KAM/UAR/002
KAM/VID/002
KAM/WSI/101
MKM/ADC/005
MKM/SDC/001
MKM/ADC/014/R3
MKM/ADC/114/AL1
MKM/CHS/02U
MKM/ADC/014/R1
MKM/ADC/014/R2
MKM/BCU/101
MKM/BCU/101/B
MKM/UAR/102
NET/SWI/004/EM1
SSR/CHS/001
CSS DST
Correlated Source Selection. Diversity receiver method Data SheeT. Every product must have a data sheet outlining
where two streams with roughly the same signal-to-noise the features, applications specifications, and revision history
ratio and data error rates are aligned (correlated) and voting as well as any other technical data required to use it. The
or soft-bits are used to decide on a bit-by-bit basis. front leaf of the data sheet is used by Sales as a short-form
data sheet which they give to potential customers.
D/A
DV
Digital to Analog. Conversion of digital signals to analog.
Design Verification. The stage between handover after unit
DAS test and product release; it culminates in a Design
Data Acquisition System. Verification Report (DVR). DV is also an acronym for the
Design Verification department.
DAS Studio 3
DVP
DAS Studio 3 uses a multi-threaded design, which utilizes
multi-core processors to improve performance. DAS Studio 3 Design Verification Plan.
lets you configure Data Acquisition Units (DAUs), network
iNET kbps
Integrated Network Enhanced Telemetry. A program, led by KiloBits Per Second. A unit of data transfer rate equal to one
Southwest Research Institute that is developing a standard thousand bits per second.
for next-generation data acquisition systems. A key objective
ksps
of iNET is to adopt open standard network-based
technologies to ensure reduced costs and equipment KiloSamples Per Second. One thousand samples per
interoperability. second.
KGV-69 MBps
A chip designed to be a ‘bare bones’ encryptor for use in very MegaBytes Per Second. One million bytes per second. 1MB=
high risk applications. The KGV 69 encrypts and decrypts 1024kB.
serial data at up to 50Mbps.
MHz
KSM-500 MegaHertz. One million cycles per second. It is used to
The software tools used to support Acra KAM-500 hardware. measure the transmission speed of electronic devices,
including channels, buses, and the computer's internal clock.
kV
KiloVolt. One thousand volts. MIL-STD
Military Standard. A detailed technical specification for a
L/ESS product that is purchased by a U.S. military agency.
Loads and Environmental Spectra Survey. Mostly airframe
strain gauges. Misses to loss
The number of sync words (1-16) which fail the match
LNA tolerance before data is considered invalid.
Low-Noise Amplifier. An amplifier used in communication
systems to amplify very weak signals. ms
MilliSecond. One thousandth of a second.
LXI
LAN eXtensions for Instrumentation. A standard developed Msps
by the LXI Consortium. The LXI standard defines devices MegaSamples Per Second. One thousand samples per
using open-standard LAN (Ethernet) for system inter-device second.
communication.
MTBF
mA Mean Time Between Failures. The mean (average) time
MilliAmpere. One thousandth of an amp. between failures of a system.
MAC MTU
Medium Access Control. The MAC layer adds source and Maximum Transmission Unit. Maximum packet size allowed
destination hardware address identification to MAC frames to be carried on the network segment. Any packet that
transmitted across the Ethernet. The MAC layer also defines exceeds the MTU is fragmented by the intermediate router or
the protocol governing the transmission of Ethernet frames switch or may be discarded. Typically the MTU of an Ethernet
over the medium. The MAC layer of wired IEEE 802.3 frame is 1522B on an IEEE 802.3 100BaseTX Ethernet
Ethernet is CSMA/CD whilst the MAC layer of wireless IEEE network segment.
802.11 is CSMA/CA.
mV
MAC address MilliVolt. One thousandth of a volt.
A hardware address which uniquely identifies each node of a
network. In IEEE 802 networks, the Data Link Control (DCL) NDA (IP)
layer of the OSI reference model is divided into two Non-Disclosure Agreement (Intellectual Properties). A legal
sublayers—the Logical Link Control (LLC) layer and the contract, between at least two parties, that outlines
Media Access Control (MAC) layer. The MAC layer interfaces confidential materials or knowledge which the parties wish to
directly with the network medium. Consequently, each share. As part of the contract, the parties agree not to
different type of network medium requires a different MAC disclose information covered by the agreement.
layer.
NRE
Matched filter
Non-Recurring Engineering. Any task to be carried out by
The optimum filter required to maximise the signal-to-noise product development becomes an active NRE. Every active
ratio in receivers. The GTS/DEC/003 uses a fully NRE culminates in a DVR.
programmable digital matched filter.
NRZ-L
Matches to lock
Non-Return to Zero Level. See PCM Codes.
The number of valid sync words (1-16) required after loss
before the data is considered valid.
ns PHM
Nano Second. One billionth of a second (1E-9 seconds). Prognostic Health Monitoring. Like CBM, originally used for
wind turbines and generators.
NTP
PHUMS
Network Time Protocol. Internet time synchronization
protocol with millisecond accuracy. Prognostic HUMS. See HUMS.
OLM PING
Operational Loads Monitoring. Mostly airframe strain gauges. Packet Inter-Network Groper (ICMP Echo Request). An
Internet utility used to determine whether a particular IP
OSI (model) address is reachable by sending out a packet and waiting for
a response. PING is used to test and debug a network as well
Open System Interconnection. An ISO standard for
as see if a user or server is online.
worldwide communications that defines a framework for
implementing protocols in seven layers. Control is passed PO
from one layer to the next, starting at the application layer in
one station, proceeding to the bottom layer, over the channel Purchase Order. Document issued by a buyer to a seller,
to the next station and back up the hierarchy. indicating the type, quantities and agreed prices for products
or services the seller will provide to the buyer.
Package
Port
An element of XidML that describes how data is transported.
For example, when starting kExcel we have to select the A number used, in conjunction with the IP address, to
package (PCM format) to be loaded in SAM/DEC/007. indicate one end of an Ethernet conversation. Some port
numbers are reserved for particular services. The port
PAM number identifies what type of port it is. For example, a
server listening for HTTP traffic listens on port 80. Port
Pulse Amplitude Modulation. Pulse modulation in which a
numbers range from 0 to 65536, but only port numbers 0 to
voltage is sampled periodically, then transmitted as an analog
1024 are reserved for privileged services and designated as
signal whose amplitude is proportional to the sampled
well known ports. For more information, see
voltage. Because PAM is susceptible to transmission noise, it
http://www.iana.org/numbers
has been replaced by PCM in most telemetry applications.
For more information, see TEC/NOT/024, Evolution of Pulse PTP
Code modulation (PCM).
Precision Time Protocol, IEEE 1588. GPS-triggered time
Parser synchronization protocol with sub-millisecond accuracy.
Primarily an Curtiss-Wright word for a bus monitor that stores PPM
whole packets in triple buffers (received, interim, and read) so
that specific words from specific packets can be included Parts Per Million.
coherently.
Pps
pBIT Packets Per Second. The measurement of activity in a local
Periodic Built-In-Test. area network.
PCB QoS
Printed Circuit Board. A rigid, flat board that holds chips and Quality of Service. A measure of performance in a data
other electronic components. A PCB legend on a PCB communications system, which may comprise of one or more
indicates its part number and serial number. metrics. In networked-based systems typical QoS metrics
include latency, jitter, throughput, and loss. QoS provisioning
PCM mechanisms are used to ensure that the system’s
performance meets the target QoS goals as defined by the
Pulse Code Modulation. The primary way analog signals are
relevant QoS metrics.
converted into digital form by taking samples of the
waveforms from 8 to 192 thousand times per second (8 to QPSK
192kHz) and recording each sample as a digital number from
8 to 24 bits long. Quadrature Pulse Shift Keying. A digital modulation scheme
that conveys data by changing, or modulating, the phase of a
reference signal (the carrier wave). See FSK.
Return code RX
Represents the success condition of a tool. '1' means Receive. A communications abbreviation for receive.
success; '0' means failure. Contrast with TX.
RDAU RZ
WLAN
Wireless Local Area Network (IEEE 802.11). A local area network that transmits over the air typically in the 2.4GHz or 5GHz
unlicensed frequency band.
XdefML
XidML Definition Markup Language. A published (on www.xidml.org) validation schema that can optionally be used in
conjunction with XidML to allow vendors to specify constraints for their XidML instrument definitions.
Xid
eXtensible Instrumentation Definition. Old metadata standard, now replaced by XidML.
XidML
eXtensible Instrumentation Metadata exchange Mark-up Language. A published metadata schema for how telemetry systems
are configured. XidML supersedes XID and Curtiss-Wright’s XML. It includes hardware, packet, and processing setup
information.
XHUMS
Experimental HUMS. See HUMS.
X-Tools
Versions of some of Curtiss-Wright’s software tools, such as X-Setup, X-Report, X-Translate, and X-Validate; introduced in an
attempt to popularize XidML.
Text and specifications are subject to change without notice. © 2017 Curtiss-Wright. All rights reserved.