Professional Documents
Culture Documents
Design of A Two Phase Interleaved Boost Converter: Project Report Submitted To IIIT Bhubaneswar For The Degree OF
Design of A Two Phase Interleaved Boost Converter: Project Report Submitted To IIIT Bhubaneswar For The Degree OF
Design of A Two Phase Interleaved Boost Converter: Project Report Submitted To IIIT Bhubaneswar For The Degree OF
BOOST CONVERTER
Project report submitted to IIIT Bhubaneswar for the degree
OF
BACHELOR IN TECHNOLOGY
IN
ELECTRICAL AND ELECTRONICS ENGINEERING
BY:
SAURANSHU DASH (B312037)
SIMANT MOHANTY (B312043)
SWATI MISHRA (B312053)
SUSHWETA MAHARANA (B312050)
ANKIT KUMAR LAL (B312058)
This is to certify that the project work entitled “ A two phase Interleaved Boost
Converter” is an original work carried out by Sauranshu Dash(B312037), Simant
Mohanty(B312043), Swati Mishra(B312053) , Sushweta Maharana(B312050) and Ankit
Lal(B312058) in partial fulfillment for the award of degree of Bachelor of Engineering in
Electrical and Electronics Engineering of International Institute of Information
Technology , Bhubaneswar during the year 2015 to 2016 .The Project report has been
approved as it satisfies the academic requirements in respect of Project work prescribed
for the Bachelor of Engineering Degree.
(Project Guide)
EEE, Department
There have been vast technological advancements in the electronics industry, automotive
industry, the Silicon Technology and other various other fields like in Renewable energy
sources in the past few decades. This has led to an increase in the power requirement and
a need for compact power electronics. To meet this ever-increasing demand, the
interleaved boost designs have become crucial in order to keep input currents manageable
while increasing efficiency and still maintaining good power density.
Certificate.........................................................................................................(i)
Acknowledgement……………………………………………………………………........(iii)
Abstract…………………………........................................................................................ (iv)
1. Introduction……………………………………………………………………….....1
2. Boost Convertor………………………………………………………………….......2
2.1. Principle of Operation…………………………………………………........... 2
2.2. Circuit Diagram…………………………………………………………..........3
2.3. Mode of Operation……………………………………………………….........3
2.4. Applications…………………………………………………………………...7
3. Interleaved Boost Convertor ……………………………………………………........8
3.1. Principle of Operation…………………………………………………………8
3.2. Two Phase shift……………………………………………………………......8
3.3. Design aspects of IBC………………………………………………………....9
4. Simulation……………………………………………………………………………13
5. Conclusion…………………………………………………………………………...15
6. Future Work………………………………………………………………………… 15
7. References....................................................................................................................16
LIST OF FIGURES: