Professional Documents
Culture Documents
Inspection and Test Plan FOR External Drainage System
Inspection and Test Plan FOR External Drainage System
Inspection and Test Plan (ITP) for Lightning Protection System Page 1 of 6
INSPECTION AND TEST PLAN (ITP) FOR LIGHTNING PROTECTION SYSTEM
REVISION SHEET
Rev. Item/
No. Date Description From Page
No. Line
Inspection and Test Plan (ITP) for Lightning Protection System Page 2 of 6
INSPECTION AND TEST PLAN (ITP) FOR LIGHTNING PROTECTION SYSTEM
Copy
Recipient Position Location
No.
1 MINISTRY OF DEFENSE (Employer)
2 DAR AL-HANDASAH (Employer)
3 JV PROJECT DIRECTOR BSS JV MAIN OFFICE
4 JV CONTRACTS MANAGER BSS JV MAIN OFFICE
5 JV CONSTRUCTION MANAGER BSS JV MAIN OFFICE
6 JV QA/QC MANAGER BSS JV MAIN OFFICE
Inspection and Test Plan (ITP) for Lightning Protection System Page 3 of 6
INSPECTION AND TEST PLAN (ITP) FOR LIGHTNING PROTECTION SYSTEM
Notes:
This document is based on Contract Specification, codes, standards and a good
engineering practice that is applied in Project and is intended to highlight the
Inspection and Test Plan (ITP) for Lightning Protection System Page 4 of 6
INSPECTION AND TEST PLAN (ITP) FOR LIGHTNING PROTECTION SYSTEM
minimum tests and inspections that ensure quality requirements are fulfilled within
the scope of the document.
In case of any conflict between this document and the Project Specification,
drawings and applicable codes, the project Specification shall take precedence over
this ITP.
Inspection and Test Plan (ITP) for Lightning Protection System Page 5 of 6
Drawing Review & IFC Drawing/Project
1.0 Approved Shop Drawings Document Submittals Project Manager I/P R R/A
Approvals Specification
3.0 Materials
4.0 Installation
Legend: I/P - Initiate /Perform, S - Surveillance Inspection, W - Witness Inspection Point, H - Mandatory Hold Point for Inspection, R/A - Review & Approve,
IFCD - Issued for construction Drawing, SC – Sub Contractor , PE – Project Engineer R - Review
Inspection and Test Plan (ITP) for Lightning Protection System Page 6 of 6