QlikAway OBD II PORT TRACKING DEVICE

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

QlikAway OBD II PORT TRACKING DEVICE:

● ABS Plastic Casing - Yes


● Internal GSM antenna - yes
● Internal GPS antenna - yes
● Motion Sensor - 3 Axis Accelerometer - Yes
● Real Time Tracking - Yes
● Sending acquired data via GPRS (TCP/IP protocols) - Yes
● Smart algorithm of GPRS connections (GPRS traffic saving) - Yes
● Power failure detection - Yes
● Over the air configuration. - No
● Small and Plug & Play - Yes
● CAN and K-Line Support for Vehicle Data Acquisition - Yes
● Bluetooth: BLE 4.1 (optional) - No
● Superior automatic protocol detection algorithm - Yes
● Can read both Standard and Manufacturer Specific Parameters - yes
● Vehicle battery voltage monitoring. - yes

A GPS-GSM-RFID based Tracking and Monitoring System with OBD-II( Onboard Vehicle
Diagnostics standards 2) interface, which adds remote diagnostics capabilities to our existing
GPS Vehicle tracking platform.
Along with vehicle tracking data, other vehicle-related parameters, and diagnostic information like
Error codes, Real time speed, RPM, Fuel level, Real Time Odometer can be acquired through
OBD-II interface and sent to server through GSM/GPRS for Processing.
With Current OBD-II interface becoming standardized with all the vehicle manufacturers, this
solution opens up an opportunity to offer a wide range of services & applications to users and
huge business opportunity within in automobile ecosystem.
OBD Parameters
● Monitor status since DTCs cleared. (Includes malfunction - Yes
● Indicator lamp (MIL) status and number of DTCs.) - Yes
● Calculated engine load - Yes
● Engine coolant temperature - yes
● Intake manifold absolute pressure - yes
● Engine RPM - yes
● Vehicle speed- yes
● OBD standards this vehicle conforms to India OBD II (IOBD II)- yes
● MAF air flow rate- yes
● Distance traveled with malfunction indicator lamp (MIL) on- yes
● Fuel Rail Gauge Pressure (diesel, or gasoline direct injection)- yes
● Warm-ups since codes cleared- yes
● Distance traveled since codes cleared- yes
● Run time since engine start- yes
● Throttle position- yes
● Fuel data
● Inlet Tampreture
● Mileage
● Direction

Technical Information:-

Parameters Description

Chipset UBLOX-7

8 MB solid state Flash, 100K Erase and Program Cycle, 10 year


Memory
data retention

GSM Module Quad band 850/900/1800/1900MHz

GPS chip: UBLOX-7


Reacquisition Sensitivity: -160dBm
GPS Module Position accuracy: 5-10 CEP
Cold Start: 45s
Hot Start : 1s

Antennas Internal Antennas


Communication Interface TCP/IP on GPRS

Record Storage/buffer NA

Ports OBD II port

Speed Sensor GPS(default), Through OBD Speed Data

SIM Interface Supports SIM card: 1.8V & 3V / Embedded SIM (optional)

GPRS Packet Data Class 10 ; Class 8 (Optional), Coding Scheme CS1 to CS4

LED Indication Processing, GSM, GPS, USB Detection

Connectors Standard OBD-II connector

Power Supply Wide DC input voltage range (9V - 30V)

Current Consumption 60mA during tracking and 30mA during standby

Internal Battery NA
Support OBDII protocol, Compliant with 90% vehicle after
Protocol supported
2008,ISO-9141-2,ISO-14230(KW)KWP2000,ISO-15765, CANBUS

Operating: -20°C to +60°C

Temperature

Storage: -20°C to +85°C (Without Battery)

Dimension
58 x 48x26
(L x W x H) in mm

Weight 150g

Protocol supported CAN and KWP

Motion Sensor 3 Axis Accelerometer

You might also like