Professional Documents
Culture Documents
Furse Welding Powder
Furse Welding Powder
Furse Welding Powder
3–
1 – SLIGHTLY HAZARDOUS
3
PPE CODE :
0 – NORMAL Safety
Helmet,Safety 1000 F
Shoe,Nose
BELOW
2–
Mask,Safety Goggles,Rubber HandBELOW
Gloves,Cover
2000 F
all,Disposable coverall,Rubber Boots. 1–
0
ABOVE 200 F
HAZARD PRECAUTION : 2 0
NOT BURN
1.Keep Way from Heat/Spark/Open flames/Hot surfaces-No Smoking.
0 – WILL
2.WashSPECIFIC HAZARD
thoroughly after handling.
3.Wear OXIDIZER
Protective Gloves/Eye
…………. OX protection/Face protection.
4. Use explosion-proof electrical/ventilating/lighting equipment. Wash thoroughly after
ACID …………….. ACID
handling.
INSTABILITY HAZARD
ALKALI
5. Do not …………..…
eat, drink or smokeALK
when using this product 4 – MAY DETONATE
6. SmallCORROSIVE
Spills: Sweep ……………..
up or vacuum 3 – SHOCK
up spillage and collect in suitable container
COR AND HEAT
for disposal.
Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughlyCHEMICAL
2 – VIOLENT to remove CHANGE
USE NO WATER
residual contamination.
…………… W
7. Large Spills: Wet down with water and dike for later disposal. Shovel1the
– UNSTABLE
material intoIF HEATED
waste container. Cover with plastic sheet to prevent spreading. Absorb in vermiculite, dry0 – STABLE
sand or earth and place into containers. Following product recovery, flush area with water.
Harmful .Env Explosive Flammable Corrosive Poisonous/ Toxic Harmful/ Irritant Oxidising Radio Active