Professional Documents
Culture Documents
RCA System Link 6av Remote
RCA System Link 6av Remote
Note: For users of RCA, GE and ProScan DBS Products, older DBS
models require that the INFO Button on this remote be used to
make program selections. Use the SELECT button for making
program selections on newer RCA, GE and ProScan DBS models.
Battery Installation
Your Universal Remote requires 2 new AAA alkaline batteries.
2
RCU600RS manual 4/11/01 12:15 PM Page 4
Button Description For Video Operation Button Description For Audio Operation
INDICATOR LIGHT AUDIO OPERATION (Rose Colored Graphics)
The Indicator Light flashes to show that the remote is working. Press AUDIO button to enable the AUDIO mode
ON•OFF
The ON•OFF button operates the same as your original remote LEVEL+/LEVEL-
Note: Some RCA, GE and ProScan models require you to press the Sets the level of the speakers
device button to turn the device on and the ON•OFF button to during test tone mode.
turn the device off.
DSP ON•OFF
TV, VCR, DVD, DBS•SAT, AUDIO, CABLE Enables the receiver’s Digital
The TV, VCR, DVD, DBS•SAT, AUDIO, and CABLE buttons are Signal Processing mode.
used to select the device you want to control.
VOL & CH DSP MODE
The VOL (Volume) and CH (Channel) buttons increase or decrease When the DSP mode is
the channel numbers or volume. enabled, pressing this button
allows the user to cycle
MUTE through the various DSP
Mutes volume on the TV. modes.
GO BACK
The GO BACK button allows you to go to the previous channel CD, TAPE, TUNER, TV,
you selected. Operates the same as Last Channel, Previous VIDEO 1, VIDEO 2
Channel, or Recall button on your original remote. For new RCA brands, these
buttons will turn the selected
CODE SEARCH device on.
Used to program the remote or to search through codes.
AM•FM
GUIDE
The AM•FM button allows
Brings up the on-screen TV program guide if your TV has that feature.
you to select the AM•FM
INFO band on you audio receiver.
Shows the date and the time if your TV or VCR has that feature.
Functions the same as a Display button. FUNCTION
Selects the different audio
NAVIGATION BUTTONS & SELECT
input devices. The number
Used to move through on screen menuing and guides. With some
buttons also select the func-
DBS models the INFO button should be used to select the hig
tion labeled below the but-
lighted item. Use the navigation buttons to move the highlighted
tons when in AUDIO mode.
choice up, down, left, or right.
MENU•PROG DELAY-, ON, DELAY+
Brings up the Main Menu. If you are already in the menu system, Increases or decreases the
press SELECT to select a highlighted choice. Use the arrow buttons delay between the surround
to move through the Menu Selections. and main speakers when the
receiver is in the surround
CLEAR
sound mode.
Removes the on screen display to return to normal viewing.
0-9 ON•OFF, SURR, MODE
The number buttons operate the same as on your original remote, ON•OFF SURR toggles the
and are used for entering device codes. surround modes on and off.
SURR MODE cycles through
ENTER the receiver’s various
The ENTER button is used to complete channel selection for some surround sound mode
brands of TV. It is also used to complete the code entry process. settings.
TV•VCR
In VCR mode, the TV•VCR button operates the TV•VCR function FRONT, CENTER, REAR,
of your VCR. TEST
Adjust the levels of the front,
REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE center, and rear speakers
These buttons operate the same as on your original VCR or DVD respectively used with Level
remote. You must press the REC button twice to begin recording. + / Level - . The test tone
PIP, SWAP, & INPUT must be enabled first by
PIP (Picture-in-Picture) and SWAP operate your Television’s Picture pressing the TEST button.
in-Picture features. INPUT selects the video inputs of your TV if
equipped with this feature. PRESET
Used to operate preset
SLEEP channels while in Audio
The SLEEP button allows you to set a time for you to turn off your Mode.
TV automatically.
3 4
RCU600RS manual 4/11/01 12:15 PM Page 6
INDICATOR
2. Press and hold the CODE SEARCH LIGHT 2. Press and hold the CODE SEARCH INDICATOR
LIGHT
button until the INDICATOR LIGHT CODE
SEARCH button until the INDICATOR LIGHT CODE
SEARCH
lights, then release the CODE SEARCH lights, then release the CODE
button. SEARCH button.
(BLINK) (BLINK)
3. Press and release the DVD button DVD 3. Press and release the DBS•SAT button DBS•SAT
(The INDICATOR LIGHT will blink (The INDICATOR LIGHT will blink then
then remain lit). remain lit).
4. Enter the code using the Number 4. Enter the code using the Number
Buttons. Buttons.
(OFF)
After your code is entered, the (OFF)
After your code is entered, the
INDICATOR LIGHT will turn off. If INDICATOR LIGHT will turn off. If
the code is not valid, the INDICATOR the code is not valid, the INDICATOR
LIGHT will blink. Check the code list LIGHT will blink. Check the code list
and repeat process. and repeat process.
5. Aim the remote at your DVD System ON OFF 5. Aim the remote at your DBS System ON OFF
and press the ON•OFF button. Your and press the ON•OFF button. Your
DVD System should turn off. DBS System should turn off.
6. If the DVD System responds, no further Note: If your DBS System does not respond,
programming is required. try all the codes for your brand. If the codes do
not work, or your brand is not listed, try the
Code Search method on page 16.
Note: If your DVD does not respond, try all the
codes for your brand. If the codes do not work,
or your brand is not listed, try the Code Search 6. With your DBS System on, press CH+
method on page 16. (CHANNEL UP). If the satellite system
responds, no further programming is
7. Enter your code here for easy reference. DVD CODE required. SATELLITE CODE
DVD Codes
Aiwa ........................................350 Satellite Codes
Hitachi ......................................351
JVC....................................161, 352 Alphastar..................................079 Panasonic ................................075
Konka ..............................353, 354 Echostar (Dish System) ..........089 Philips ......................................085
Magnavox ................162, 356, 357 Echosphere (Dish Net) ..........079 Primestar ..................................076
Mitsubishi ................................163 GE..............................071, 080, 081 Proscan ....................071, 080, 081
Panasonic ................................355 Hitachi SYS I............................084 RCA ..........................071, 080, 081
Philips ......................162, 356, 357 Hitachi SYS II ..........................083 Sony ..........................................072
Pioneer......................................165 Hughes ............................077, 090 Toshiba......................................073
ProScan ....................................160 Magnavox ................................085 Uniden ......................................086
RCA ..........................................160 JVC ............................................082
Sanyo ........................................359
Sony ..........................166, 360, 361
Toshiba ....................167, 362, 363
Zenith ......................................364
9 10
RCU600RS manual 4/11/01 12:15 PM Page 12
3. Press and release the CABLE button CABLE (BLINK) Find the three digit code for your
(The INDICATOR LIGHT will blink AUDIO system in the code list on the
then remain lit) next page.
INDICATOR
2. Press and hold the CODE SEARCH CODE
LIGHT
SEARCH
4. Enter the code using the Number button until the INDICATOR LIGHT
Buttons. lights, then release the CODE
(OFF) SEARCH button.
After your code is entered, the
INDICATOR LIGHT will turn off. If (BLINK)
3. Press and release the AUDIO button AUDIO
the code is not valid, the INDICATOR (The INDICATOR LIGHT will blink
LIGHT will blink. Check the code list then remain lit).
and repeat process.
5. Aim the remote at your Cable Box and 4. Enter the code using the Number
ON OFF
press the ON•OFF button. Your Cable Buttons.
Box should turn off. After your code is entered, the (OFF)
Note: If your Cable Box does not respond, try INDICATOR LIGHT will turn off. If
all the codes for your brand. If the codes do the code is not valid, the INDICATOR
not work, or your brand is not listed, try the LIGHT will blink. Check the code list
Code Search method on page 16. and repeat process.
6. With your Cable Box on, press CH+ 5. Aim the remote at the device you wish ON OFF
(CHANNEL UP). If the Cable Box to control and press the ON•OFF button.
responds, no further programming The device should turn off.
is required. CABLE BOX CODE
Note: If your device does not respond, try all
7. Enter your code here for easy reference. the codes for your brand. If the codes do not
work, or your brand is not listed, try the Code
Search method on page 16.
13 14
RCU600RS manual 4/11/01 12:15 PM Page 16
1. Sleep timer program will be cancelled Important: You may have to press
ON OFF ON•OFF up to 200 times.
and reset to zero by either of the
(BLINK)
following:
5. When your device turns off, press
Press and hold SLEEP button until ENTER, the INDICATOR LIGHT will
INDICATOR LIGHT blinks or press ENTER
turn off.
ON•OFF button, turning TV OFF. (OFF)
to view the menu of the device chosen. 2. Press and release the device button for
The menu should now be visible on the code you are retrieving. The
DVD DBS•SAT
your television. Indicator Light will blink once.
AUDIO CABLE
MENU button applies the highlighted 5. The number which causes the indicator
menu item. light to blink is the first digit of your
code.
SELECT button may also be used to
select the menu item, especially in 6. Repeat step 4 until you have retrieved all
DVD. three numbers in the code.
Not all functions in competitive models
and brands of televisions may be fully
supported.
EXITING THE MENU MODE
Push the CLEAR key to return to
normal operation.
15 16
RCU600RS manual 4/11/01 12:15 PM Page 18
For Customer Service, contact the RCA Help Center at: www.rca.com
17 18
RCU600RS manual
4/11/01
12:15 PM
Page 20
First Class
Postage
Required
Thank you for filling out this card. This information will help us better serve
you and others who purchase RCA Consumer Electronics Products. We will
not share your information with any other companies.