Professional Documents
Culture Documents
Certificate of Compliance
Certificate of Compliance
Issued by:
PRODUCTS
CLASS 2258 02
CLASS 2258 82
CLASS 2258 02
Ex d m IIC T5: Ambient Temperature -40 °C to +55 °C.
CLASS 2258 82
Class I, Zone 1, Groups AEx d mb IIC Gb; T5; Ambient Temperature -40 °C to +55 °C.
Model DNFT-LED-de-fg
Certificate: Master Contract:
Model DNFT-PRG-de-fg:
Model DNFT-LCC-de-fg:
Model DNFT-LED-de-fg-24v
Model DNFT-PRG-de-fg-24v:
Model DNFT-LCC-de-fg-24v:
Model DNFT-PRX-fg:
de fg
APPLICABLE REQUIREMENTS
Certificate: Master Contract:
The products listed, including the latest revision described below, are
eligible to be marked in accordance with the referenced Certificate.
ExTR :
Status*: Issued
ExTR Free Reference CA/CSA/2013/TR186200-2500541
Number*:
List of Standards Covered*: IEC 60079-0 (Ed.6.0); IEC 60079-1 (Ed.6); IEC 60079-18 (Ed.3)
Issuing ExTL*: CSA - CSA International
Endorsing ExCB*: CSA - CSA International
Manufacturer*: Terra Metrics Ltd, dba Whitlock Instruments
1300 North Texas
Odessa, TX 79761
Country of Manufacture*: United States of America
Ex Protection*: Ex d mb IIC T5 Gb
Ratings: Input - 3.6V Battery OR 24Vdc 20mA±5mA Output Swtich - 240Vdc, 2.5VA
Product*: Digital No Flow Timer
Model Reference*: DNFT LED
DNFT PRG
DNFT LCC
DNFT LED 24V
DNFT PRG 24V
DNFT LCC 24V
DNFT PRX
Related IECEx Certificates: IECEx CSA 12.0020 issue: 0 [Current]
Comment:
Attachment:
Last modified: 03/26/2013 09:08:16 PM Copyright © IEC-IECEx 2013 , Geneva, Switzerland. All rights reserved.
http://iecex.iec.ch/iecex/iecexweb.nsf/0/624E29001D7B73C4C1257AA9006BEA61?open... 3/27/2013
Certificate of Conformity: IECEx CSA 12.0020 Page 1 of 3
IECEx Certificate
of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com
Status: Current
Type of Protection: Ex d, mb
Marking:
Ex d mb IIC T5 Gb
Ta: -40°C to +55°C
Signature:
(for printed version)
Date:
IECEx Certificate
of Conformity
Certificate No.: IECEx CSA 12.0020
Page 2 of 3
This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and
found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products
covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This
certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents
as amended.
STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified
documents, was found to comply with the following standards:
This Certificate does not indicate compliance with electrical safety and performance requirements other than those
expressly included in the Standards listed above.
http://iecex.iec.ch/iecex/iecexweb.nsf/421ce8815c53a3afc1257a1e00576486/eda84d57e3c... 3/27/2013
Certificate of Conformity: IECEx CSA 12.0020 Page 2 of 3
Test Report:
CA/CSA/ExTR12.0020/00
CA/CSA/QAR09.0003/03
http://iecex.iec.ch/iecex/iecexweb.nsf/421ce8815c53a3afc1257a1e00576486/eda84d57e3c... 3/27/2013
Certificate of Conformity: IECEx CSA 12.0020 Page 3 of 3
IECEx Certificate
of Conformity
Certificate No.: IECEx CSA 12.0020
Page 3 of 3
Schedule
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
The Digital No Flow Timer (DNFT) is a device used to monitor cycles within Progressive In-line lubrications systems.
There are seven models - DNFT LED, DNFT PRG, DNFT LCC, DNFT LED 24V, DNFT PRG 24V, DNFT LCC 24V, and
the DNFT PRX. The first three models have an enclosed single 3.6 Volt lithium battery as a power source. The second
three models are powered from an external 24Vdc supply. The last model, the DNFT PRX proximity sensor model, does
not have a battery or 24Vdc power. All models except the DNFT PRX have an encapsulated PCB.
The DNFT mounts directly to a divider valve and has a spring-loaded magnetic piston exposed to the flow of lubricant. A
reed switch mounted on a circuit board within the unit senses the proximity of the magnetic piston through the material of
the unit's housing, and initiates a signal to a microprocessor (if present). The microprocessor counts lubrication cycles
and provides an LED and optional LCD display to the user. If the microprocessor does not detect a lubrication cycle
within a pre-programmed time period, an output signal is generated by transistors located on the circuit board.
CONDITIONS OF CERTIFICATION: NO
http://iecex.iec.ch/iecex/iecexweb.nsf/421ce8815c53a3afc1257a1e00576486/eda84d57e3c... 3/27/2013
EC DECLARATION OF CONFORMITY
Manufacture:
Terra Metrics INC, dba Whitlock Instruments
1300 N. Texas Ave
Odessa, Texas 79761 USA
On behalf of Terra Metrics INC, dba Whitlock Instruments, I declare that, on the date the equipment accompanied by this
declaration is placed on the market, the equipment conforms with all technical and regulatory requirements of the above listed
directives.
Race Ritchie
President of Whitlock Instruments