Professional Documents
Culture Documents
MP Ez
MP Ez
menu 1 {
"Post Processor:",
"&Change",
"&Run",
"",
"",
"",
"",
"",
"Run &old",
"",
"&Update PST"}
[canned text]
1. "Stop"
2. "Ostop"
3. "Bld on"
4. "bLd off"
5. "M5"
6. "M6"
7. "M7"
8. "M8"
9. "M9"
10. "M10"
[misc reals]
1. "Misc. real [1]"
2. "Misc. real [2]"
3. "Misc. real [3]"
4. "Misc. real [4]"
5. "Misc. real [5]"
6. "Misc. real [6]"
7. "Misc. real [7]"
8. "Misc. real [8]"
9. "Misc. real [9]"
10. "Misc. real [10]"
[misc integers]
1. "Work Coordinates [0-1=G92, 2=G54's]"
2. "Absolute/Incremental, top level [0=ABS, 1=INC]"
3. "Reference Return [0=G28, 1=G30]"
4. "Misc. integer [4]"
5. "Misc. integer [5]"
6. "Misc. integer [6]"
7. "Misc. integer [7]"
8. "Misc. integer [8]"
9. "Misc. integer [9]"
10. "Misc. integer [10]"
[simple drill]
1. "Drill/Counterbore"
2. "Feed rate"
3. "Dwell"
4. "Clearance..."
5. "Retract..."
6. "Depth..."
7. ""
8. ""
9. ""
10. ""
11. ""
[peck drill]
1. "Peck drill"
2. "Feed rate"
3. "Dwell"
4. "Clearance..."
5. "Retract..."
6. "Depth..."
7. "1st peck"
8. "Subsequent peck"
9. "Peck clearance"
10. ""
11. ""
[chip break]
1. "Chip Break"
2. "Feed rate"
3. "Dwell"
4. "Clearance..."
5. "Retract..."
6. "Depth..."
7. "1st peck"
8. "Subsequent peck"
9. "Peck clearance"
10. "Retract amount"
11. ""
[tap]
1. "Tap"
2. "Feed rate
3. "Dwell"
4. "Clearance..."
5. "Retract..."
6. "Depth..."
7. ""
8. ""
9. ""
10. ""
11. ""
[bore1]
1. "Bore #1 (feed-out)"
2. "Feed rate"
3. "Dwell"
4. "Clearance..."
5. "Retract..."
6. "Depth..."
7. ""
8. ""
9. ""
10. ""
11. ""
[bore2]
1. "Bore #2 (stop spindle, rapid out)"
2. "Feed rate"
3. "Dwell"
4. "Clearance..."
5. "Retract..."
6. "Depth..."
7. ""
8. ""
9. ""
10. ""
11. ""
[misc1]
1. "Fine bore (shift)"
2. "Feed rate"
3. "Dwell"
4. "Clearance..."
5. "Retract..."
6. "Depth..."
7. ""
8. ""
9. ""
10. ""
11. "Shift"
[misc2]
1. "Misc. #2"
2. "Feed rate"
3. "Dwell"
4. "Clearance..."
5. "Retract..."
6. "Depth..."
7. "1st peck"
8. "Subsequent peck"
9. "Peck clearance"
10. "Retract amount"
11. "Shift"
[drill cycle 9]
1. "Custom cycle 9"
2. "Feed rate"
3. "Dwell"
4. "Clearance..."
5. "Retract..."
6. "Depth..."
7. "1st peck"
8. "Subsequent peck"
9. "Peck clearance"
10. "Retract amount"
11. "Shift"
[drill_parm_dlg]
1. "Drill parameters"
10. ""
12. "clearance"
19. "Custom..."