Professional Documents
Culture Documents
Catalogo Sensor Flujo y Velocidad SS 2060 HT 350 C
Catalogo Sensor Flujo y Velocidad SS 2060 HT 350 C
SS 20.60 HT 350 °C
Technical data
Measuring quantity Standard flow velocity wN normalized to Analogue output Temperature and flow
TN = 20 °C and p N = 1.013.25 hPa (to be selected when ordering)
- Voltage 0 ... 10 V
Measuring fluid Air, nitrogen. Other gases on request
- Current 0 (4) ... 20 mA
Measuring range (w N) 0 …10 / 20 m/s
Load resistance (admissible)
Lower range limit 0,2 m/s - Voltage output 10 k
Measur ing inaccuracy 3 % of meas. value (+ 0.4 % of meas. range) - Current output 400
Recovery time constant 6 s at temperature jump Pulse duration min. 1/(2 x fmax )
T air = 40 K und wN = 5 m/s Material
- Housing aluminium AlMgSiPb, anodized
Temperature dependence compensated within the operating temperature
- Probe stainless steel X6 CrNiMoTi 1.4571
range
- Probe tip ceramic(ZrO2)
Supply voltage (UB ) 24 VDC 20%
Mounting press fitting brass, G 1/2 x 12
Current consumption 100 mA typ. @ wN = 20 m/s and Tmedium = 350 °C
Mounting tolerance 5° relative to flow direction
Switch-on current 140 mA for max. 5 s
Installation position as desired, for vertical downdraft lower range
Stabilization time approx. 10 s after switch-on limit w N 2 m/s
Ele ctrical connection Dimensions
- Probe M12, 8-pole (male) - Housing 67.3 x 56.5 (mm)
2
- Connection cable M12, 8-pole (female) with cable 4 x 0.34 mm , - Probe tip (w x h x d) 12.5 x 8 x 15.2 (mm)
length = 5m, stripped core ends tinned - Probe tube 15 mm
Line length (admissible) Mounting length (L) 400 m m
- Voltage output 15 m
- Current output 100 m Weight 550 g max. (without cable)
- Digital output 100 m Protection class IP 65
Mounting parameters
Accessories
ISO calibration certificate 518 427
Art. -Nr. 517 796.02A – T echnic al modif ication reserved – Data subject to change
Power supply 24 VDC, supply 115 / 230 VAC 300 640
Scope of delivery:
DA = tube outer dimension AL = projection length Standard-Sensor is delivered with press fit mounting and electrical
SL = welding stud length R = reference length connection cable.
E = probe tube setting length L = probe tube mounting length Field bus versions are supplied without cable.
To avoid overheating of the sensor electronics E has to be
> 70 mm. No isolation in this section is allowed so tube can
function as a heat sink.
Ordering information
Article number: Description:
®
511 800 – K Y Z S F SCHMIDT Flow Sensor SS 20.60 HT