NOTES:
1. Lead tolerarce:
a. For 2 inches 40.006 inch
b, Reet threads i stretch exceeds 0.006 inch in 2 inch
2. At Outside Diameter less than 3.281, Bevel Diameter is void and
1/82" x 48 becomes effec
3. Are of the conection where ptng is not permitted inthe thread roots.
(POOL NETAL-TO-METAL SEAL SURFACE)
Burish marks on seal surface show contact are between pin and
box members. Refer to field inspection procedure for surface
condition of sea
Ins Pit Free Zone =|
See Note 3
WILT PO
+0000
3.625 “ons
(PIN CONNECTON LENGTH)
1,625 Min,
PRIMARY | MAKE-UP SHOULDER
(SEAL)
[3219 #941
J Bevel Dia
NX
Thread taper 0.750 per ft.
35 Threads per inch
SECONDARY MAKEUP SHOULDER
(PIN NOSE / MECHANICAL STOP)
2.424 Ref,
(PIN NOSE DIAMETER)
Assigned To: ' SIS|*
5 TLE?
Date: , sl5|
CT-M™ 26 PIN
FIELD INSPECTION DIMENSIONS.
Break Edge
1/32" Max. x 45° Ref.
See Note 5
‘ OINENSioNS wmHouT |”
Grant Prideco| rues ie FOR
Ney =|
NOY Erte INFORMATION ONLY
feeiearae curs aaneomcear aT ne
2
tof 1
P*1H6/2