Professional Documents
Culture Documents
Bare Frame Without Shear Wall IS 1893:2016 (7.6.2 (A) )
Bare Frame Without Shear Wall IS 1893:2016 (7.6.2 (A) )
2 (a))
Height of Building h
Structure type
Time Period Coefficient Ct
X
Approximate Fundamental Time Period Ta =Ct*hX
As per IS 1893:2016 Cl. 7.7.1, we have to perform RSA (Linear Dynamic Analysis) for all Buildings only ex
Gravitational Acceleration g
After Using Scale Factor (SF) we have to RUN ANALYSIS to Check NASE SHEAR EQX and EQY with RSX and R
RSX and RSY must match with EQX and EQY. If not matched than We have to rescale the SF to match the base
To save time I orefer directly running the analysis without modifyinf the 1st SF and than Check the BASE SH
30.8 m
'Awi=1 'Awi=2 'Awi=3
2
17.617 m 4.679 2.113 5.949
0.301 sec >= 0.701 sec
0.701 sec > 0.4 sec
ear Dynamic Analysis) for all Buildings only except Regular Shaped Buildings in Seismic Zone 2 with height less than 15m
1
9.807 m/s2
9806.650 m/s3 As per Etabs
5
980.665
heck NASE SHEAR EQX and EQY with RSX and RSY.
an We have to rescale the SF to match the base shear.
odifyinf the 1st SF and than Check the BASE SHEAR.
-31.5134 31.5
-29.9615 30.0
304.0249 304.0
340.3469 340.3
0.1
0.1
9806.65
1016.50
863.30
0.24
0.016
1016.50
16.264
Ct
0.085
0.075
0.080