Professional Documents
Culture Documents
Mynice Welcome App To Control Your Home: en - Instructions and Warnings For Installation and Use
Mynice Welcome App To Control Your Home: en - Instructions and Warnings For Installation and Use
Welcome
The “My Nice Welcome” app allows users to configure and con-
1 DESCRIPTION
2 – ENGLISH
2
CONFIGURATION WITH MYNICE TECHNOLOGY
CONFIGURATION
Next
WiFi Network
ELECTRICAL CONNECTIONS
2 CONFIGURATION
l Before configuring the app, install the specific ac- Press “Start” on the welcome
page in order to start the
cessories (CORE or IT4WIFI) by following the in-
structions in their respective instruction manuals. 04 guided procedure.
Make sure you are connected
to the home WiFi network.
2.1 CONFIGURATION WITH MYNICE Press “Next” to move on to
the next page.
TECHNOLOGY
Next
Add accessory
Add Accessory
Next
ENGLISH – 3
CONFIGURATION WITH MYNICE TECHNOLOGY CONFIGURATION WITH MYNICE TECHNOLOGY
WPS connection
Next
Your WiFi router has WPS WPS connection
(only with CORE and
technology, which allows
you to connect the Log on to the
08
accessory quickly without
entering the password. Android system) accessory
12
Do you want to use
this method?
If the home WiFi router uses To log the accessory on to
WPS technology, press “OK”, the app, press “Next”.
if not, cancel.
Ok Cancel
Next
Next
Accessory WPS
button Accessory code
08a In order to pair your
Press the WPS button on the 13 accessory enter the code
accessory and then press
printed on the label and press
Next.
“Next”.
Next
Accessory ready
Your accessory has been set
14 up correctly and is ready to
be used.
Next Press “Complete”
Configuration Accessory ready
Your accessory has been set up correctly.
Make sure you are connected
09 to the home WiFi network and
enter the password.
Press “Next” to move on to
the next page. Complete
Accessory on the
Next
network
The accessory is now
11 connected to the home WiFi
network.
Press “Next” to move on to
the next page.
4 – ENGLISH
3.1.1 Adding an automation (only with CORE)
ELECTRICAL CONNECTIONS
3 ADDING OR REMOVING DEVICES
Table 3
ADDING AN AUTOMATION DEVICE
3 ADDING OR REMOVING DEVICES
Settings
Select the home Save
Go to the previously registered
Home.
Name of the
02
HOMES
02
New Automation automation
Home_Sara
Name [Name-automation] Enter the name to be used for
the new automation and save.
My Home - Primary Home
Add Home...
Add device
the automation.
DEVICES Gate
Add device... Select Type
04 Awning Select the type of automation
Select the type of you want to control.
Add device
device Door
Select the type of device you
Lights
Make sure you are near the CORE. want to add.
Select the type of device
you want to add to your Core. Alarm
(NOTE: select the sensor
type to add sirens.)
Dimmer
05 Power load
Automation New Automation
Select the icon
Lights
The app proposes one or more
Sensor 05 icons to be assigned to the
Select the icon you want to automation; select the icon you
want.
assign to the automation.
Remote control
ENGLISH – 5
ADDING AN AUTOMATION DEVICE 3.1.2 Adding a sensor
Table 4
ADDING A SENSOR
First press on the
button
07 Next
Press the indicated remote New sensor
control button to start the
To add a new sensor, enter the
association. 01
Sensor Name
name to be assigned to the
sensor.
Name Sensor Name Press “Next”
ATTENTION
Yes No
proceed, or press “No” so as
Stated
not to proceed.
Device
Brand
Attention
Manual search
07 If the sensor is not detected
automatically, proceed with
manual matching.
6 – ENGLISH
ADDING A SENSOR 3.1.3 ADDING A REMOTE CONTROL
Save
Number of buttons
Next
Sensor detected, end.
The sensor is correctly Button 1
detected with this second Press the button on the remote
11 03
press. control you want to match with
Button 1.
Press “Next” to proceed with
saving the sensor.
Next
Button 1 detected
04
Press “Next” to confirm.
ENGLISH – 7
ADDING A REMOTE CONTROL 3.2 ADDING A SCENE
A scene allows you to control one or more accessories at the
Button 1 same time.
Code detected Detection correct
When the button has been 3.2.1 With the “CORE” accessory
07 Automation detected correctly, a menu is
displayed with the possible Table 6
Control Actuator
controls to be assigned to the ADDING A SCENE
button.
Select Type Settings Menu
Go to the “Settings” Menu.
01
Settings
Subsequent buttons
Select the home
Button 3
Repeat the button detection
Detect procedure described above, if Go to the previously registered
08 you want to add other remote Home.
Button 4 control buttons. You can also HOMES
add the remaining buttons at a 02
Home_Sara
later time.
Detect
My Home - Primary Home
Add Home...
Home_Sara
Attention
Add automation
05
Devices
Press “Add automation” and
Add automation select the automation you want
from the proposed list.
Select action
06 Select the action you want from
the proposed list.
Select action
Enable action
Enable the action and, if
required, enter the delay in
07 Enable/disable the action and seconds.
enter the delay in seconds.
Go back using “<” and,
if necessary, enable the
remaining actions.
Add actions
08 2 Once you have enabled the
required actions, press “Add”.
5
8 – ENGLISH
ADDING A SCENE 3.3 AUTOMATIC ENABLING OF A SCENE
(TRIGGER) OR AN ACTION
Home_Sara
My Home - Primary Home
Add Home...
Settings Menu
01
Go to the “Settings” Menu. Select the scene
Select the scene you want to
Settings SCENES add a trigger to.
Select the home 04 Your Scene
Add trigger
Add a trigger
SCENES 05 Press “Add trigger” and select
the required item (e.g. Time
Add Scene... Add a scene Time trigger
trigger/Sensor trigger)
03 To add a new scene, press
A Scene is a set of actions of your Accessories.
“Add Scene”.
Sensor trigger
To create a Scene, in your Home you must
have at least one Accessory and be Admin.
NAME Your Scene Add a new accessory Set date and time
05 Press “Add new Accessory”
DEVICES and select the required June
accessory.
Add new Accessory...
July
SELECT ACTION
August
Select action
Select days
Friday
Saturday
Sunday
Attention
Save the trigger
Do you want to save the
09 When you have finished setting
scheduled action?
the trigger, press “Add” to
Yes No return to the previous page.
Attention
Save the trigger
Do you want to save the
12 When you have finished setting
scheduled action?
the trigger, press “Add” to
Yes No return to the previous page.
10 – ENGLISH
3.3.2 With the “IT4WIFI” accessory AUTOMATIC SAVING OF AN ACTION
Table 9
AUTOMATIC SAVING OF AN ACTION
Settings Menu
Go to the “Settings” Menu.
01
Settings
Select the home The action is enabled.
08 Save the scheduled action and
Go to the previously registered
Home. press “<” to go back.
02 HOMES
Home_Sara
My Home - Primary Home
Add Home...
MODE
ACCESSORY:
To view the information about the accessory, select “Informa-
tion” by accessing the menu:
One time
Repetition
“About” > “Settings” > “Home” > “Accessory” > “About”
SELECT ACTION
To update the Accessory, select “Update your Accessory”
Open
Set action (function only available to user with an Administrator profile).
Stop
Select the action you want the
07 device to perform and press
Close
“Save”.
a The update only works if the smartphone is con-
nected to the same WiFi network as the Accessory.
Step by step
Partial opening 1
ENGLISH – 11
4.3 FAVORITES
ELECTRICAL CONNECTIONS
4 USE
Table 12
FAVORITES
4 USE
01
HOMES
Select “System” and access
Home_Sara the previously registered Add a favourite scene
Home.
My Home - Primary Home
Select the scene you wish
Add Home... SCENES
to add or remove from the
Add Scene... favorites.
Select the automation 02
A Scene is a set of actions of your Accessories.
Press “Add Scene to
favorites” or “Remove Scene
Select the automation you want To create a Scene, in your Home you must
Home_Sara have at least one Accessory and be Admin. from favorites” and save.
to manage.
02 AUTOMATION
Name automation
Add a favourite
automation
Select the accessory and then
Manage the the automation you wish to add
automation 03
NAME
or remove from the favorites.
Press the buttons required to DEVICES
Press “Add Accessory
manage the automation. to favorites” or “Remove
03
Name automation
Accessory from favorites”
and close to save.
SCENES
Select the scene you want to
be played. Select the accessory
02 Your Scene
Accessories
Select the accessory
Add Scene... connected previously to the
03 SELECT ACCESSORY
app.
SoniaCore
12 – ENGLISH
5
USER PROFILES
Administrator role RESET
If the user profile is
ELECTRICAL CONNECTIONS
5 RESET
SoniaCore
“Administrator”, there are a
USER PROFILE
number of possible changes, 5.1 RESETTING THE APP
e.g. enable receipt of To reset the app, go to the “Settings” menu and press “Reset
USERNAME SoniaCore notifications by associated app”. All data saved in the app will be cancelled.
devices; enable, disable or
delete user.
DESCRIPTION Test
05
ROLE Administrator
User role
a If there is only one administrator after the reset of
the app, you will need to fully reset the accessory.
NOTIFICATIONS If the user profile is “User”,
there are a number of limited
5.2 RESETTING THE WIFI ROUTER
Notifications
changes. To connect to an
Devices enabled to send notifications: accessory used by other users, If the WiFi network router needs to be replaced or its password
you need to send a request modified, you can reset the accessory settings regarding the
and wait for the administrator
Remote control 1
WiFi network without having to reset the user settings.
to enable your use.
Sensor Name
To do this:
–– briefly press the accessory RESET button and select “Recon-
figure accessory” in the home settings.
ENGLISH – 13
14 – ENGLISH
ENGLISH – 15
IDV0695A00EN_28-01-2019
Nice SpA
Via Callalta, 1
31046 Oderzo TV Italy
info@niceforyou.com www.niceforyou.com