DETAIL _A
A Ref.
| fe 0125
See Note 3
2.152 Ref.
Benchmark Dia.
NOTES:
1. Lead tolerance
1. For 1.5 inches +0.006 inch,
. Recut threads if strech exceeds 0.006 inch in 1.5 inch
2. At Outside Diameter ess than 2.531, Bevel Diameter is void and
0.051 x 45° becomes effective
3. 0.125 is new condition, may be 0.062 min. after refacng
RO.031 Ref.
4. Minimum 0.2. based on min. wall thickness at counterbore. Larger 0.
may be required for specific grade performance. Refer to catalog
2.180 47>]
PRIVARY MAKE-UP (@0x coNNeCTON LENGTH)
‘SHOULDER A
(SEAL)
wa See DETAL
2.438 +405
Bevel Dia. ‘MAKE-UP SHOULDER
2.500 Win. See Note 2 (uecHacaL sToP) 1.835 Ref.
Outside Dia 2.43240.010 4 - - - Cylindrical
See Note 4 Core Dia Dia
i 2
wr
SECONDARY
|
0.031 x 45° MIN. vane Win.
See Note 2
‘or "Performance Sheet” for specific minimum O.D. requirement. In case
‘of dispute, the larger of the two 0.D's shall gover.
sls] Drilling Products & Services
Assigned to: as
: ShsI MW20 BOX
By: FIELD INSPECTION DIMENSIONS
|= Exsceeminenteran Top P09/07/1 =—]R
We Pi ai] eee ee no Ira I