Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

UPTIME MAINTENANCE PLANNER

Service Intervals
870GLC Excavator (PIN: 1FF870GX_ _F890001— )

As Required
□ Drain fuel tank sump □ Drain primary water separators
□ Remove and clean fuel tank inlet screen □ Drain primary fuel filter and water separators
□ Clean radiator air inlet screen □ Check windshield washer fluid level
□ Check and adjust air conditioner V-belt □ Check and adjust track sag
□ Clean or replace diesel exhaust fluid (DEF) tank inlet screen □ Clean rear camera lens
□ Check and clean air cleaner dust unloader valve
Every 10 Hours or Daily
□ Check coolant level in recovery tank □ Lubricate working tool pivots and links
□ Check engine oil level □ Lubricate hydraulic coupler (if equipped)
□ Check hydraulic tank oil level
Every 50 Hours
□ Lubricate front end pin joints
Every 100 Hours
□ Inspect and re-torque track hardware
Every 250 Hours
□ Check battery electrolyte level and terminals □ Check pump drive gear case oil level
□ Check swing gear case oil level □ Drain water and sediment from hydraulic tank sump
□ Check travel gear case oil level □ Take engine oil sample
Every 500 Hours
□ Lubricate swing bearing gear □ Lubricate swing bearing
□ Drain and refill engine oil and replace filters □ Take hydraulic oil sample
□ Check air intake hoses □ Take swing gear case oil sample
□ Replace primary fuel filter and water separators □ Take pump drive gear case oil sample
□ Replace final fuel filters □ Take travel gear case oil sample
□ Replace pump case drain filter □ Take diesel fuel sample
□ Clean cab fresh air and cab recirculating air filters (replace every 6th □ Take engine coolant sample
cleaning)
Every 1000 Hours
□ Drain and refill swing gear case oil □ Replace air conditioner V-belt
□ Drain and refill pump drive gear case oil □ Replace air cleaner elements
□ Check coolant condition □ Replace pilot system oil filter
□ Adjust engine valve lash □ Replace hydraulic tank oil filters
Every 2000 Hours
□ Drain and refill travel gear case oil □ Replace primary water separators
Every 4000 Hours
□ Drain and refill hydraulic tank oil and clean suction screen □ Drain, flush, and refill cooling system
□ Replace hydraulic tank vent cap filter
Every 4500 Hours
□ Replace diesel exhaust fluid (DEF) dosing unit filter
KR46761,00014FF -19-21MAR17-1/1

T364688X19(05APR17)(ENGLISH) Worldwide Construction


And Forestry Division
PRINTED IN U.S.A.
Required Parts
Every Every Every Every Every Every
Description Part Number 250 500 1000 2000 4000 4500
Hours Hours Hours Hours Hours Hours
Engine Oil Filter Element 1132402322 2 2 2 2 2
Final Fuel Filter Element 8982394641 2 2 2 2 2
Primary Fuel Filter Element 4676385R 2 2 2 2 2
Pump Case Drain Filter Element 4363399 1 1 1 1 1
Hydraulic Tank Oil Filter Element 4654745 2 2 2
Primary Air Filter Element AT175223 2 2 2
Secondary Air Filter Element AT175224 2 2 2
Pilot System Oil Filter Element 4630525 1 1 1
Air Conditioner V-Belt 4612763 1 1 1
Engine Rocker Arm Cover Gasket 1111731191 1 1 1
Primary Water Separator Element YA00002973 2 2
Hydraulic Tank Vent Cap Filter Element 4437838 1
Diesel Exhaust Fluid (DEF) Dosing Unit Filter 8981694030 1
Cab Fresh Air Filter Element 4S00686R As Required
Cab Recirculating Air Filter Element FYA00001490 As Required
Dust Unloader Valve 4486015 As Required
John Deere Plus-50™ II Engine Oil and 57.0 L 63.2 L 63.2 L 63.2 L 57.0 L
TY26674
Pump Drive Gear Case Oil1 (15.1 gal) (16.7 gal) (16.7 gal) (16.7 gal) (15.1 gal)
API GL-5 Swing Gear Case and Travel Gear 31.4 L 69.0 L 69.0 L
TY6296
Case Oil1 (8.3 gal) (18.2 gal) (18.2 gal)
Hitachi SUPER EX 46HN Hydraulic Oil1 500.0 L
2908-050
(132.1 gal)
John Deere Cool-Gard™ II Pre-Mix 124.0 L
TY26575
(32.8 gal)
Fluid Analysis Kits2
Diesel Engine Oil AT346594 1 1 1 1 1 1
Travel Gear Case Oil AT346594 2 2 2 2 2
Hydraulic Oil AT346594 1 1 1 1 1
Swing Gear Case Oil AT346594 1 1 1 1 1
Pump Drive Gear Case Oil AT346594 1 1 1 1 1
Diesel Fuel AT180344 1 1 1 1 1
Engine Coolant TY26873 1 1 1 1 1
1
See operator's manual for recommended oil type and oil viscosities based on operating temperatures.
2
Based on fluid analysis results, intervals may need to be adjusted for operating conditions. Consult an authorized John Deere dealer.
Plus-50 is a trademark of Deere & Company
Cool-Gard is a trademark of Deere & Company
KR46761,0001500 -19-21MAR17-1/1

Original Instructions. All information, illustrations and specifications COPYRIGHT © 2017


in this manual are based on the latest information available at the DEERE & COMPANY
time of publication. The right is reserved to make changes at any All rights are reserved
time without notice. A John Deere ILLUSTRUCTION ® Manual
Previous Edition 2015, 2016

You might also like