Professional Documents
Culture Documents
Requirements Sauna wk2103.7
Requirements Sauna wk2103.7
Requirements Sauna wk2103.7
4070 x3125
Between the shower and the washstand is planned a transparent partition wall.
The second part the room is planned for sauna.
The sauna sizes are indicative and you can change them a bit, at your discretion
3125 x2250
https://megasauna.de/Saunaofen-Huum-Hive-inkl-Steuerung-HUUM-UKU-App-WIFI-15kW-ohne-
Saunasteine
Plus I liked their idea with a glass door for complete wall.
But the width there is only 2000mm. Here is an option to either ask the manufacturer to make the side
panels wider, I think it is possible (1100 mm instead of 600 mm), or use as is and add insulated sections.
What would be would you advice?
According to the manufacturer recommendations each m2 of the glass 1.5m3 of heater needed
So heater capacity must be 14 + 6x1.5 =~ 23m3
15kW HUUM heater should be OK. What do you say about this calculation?
Building materials
In terms of logistics and discounts, it would be best to order everything in one place, such as
megasauna.de.
The main material used for shelves is a thermo alder or a thermo aspen, and what do you say about Thermo
Abachi?
They say it is a very good material and costs 2 times cheaper than a thermo alder or a thermo aspen
https://www.saunainter.com/en/sauna-building/sauna-bench-materials/thermo-abachi-bench-wood-a-
26x90mm-2400mm/26902450tab/?description_view=show&menu_rule=270
https://megasauna. en/Sauna-Buildingmaterials
https://www.saunainter.com/en/sauna-building
https://www.holzhandel-owl.de/shop/profilholz-nordische-sibirische-fichte/
https://holz-kahrs.de/sauna-profilholz/
https://sauna-life.com/Sauna-wood:::5.html
https://www.profishop.holz-junge.de/browse/Hobelware-2990#PageNumber=1&StockFilter=false
Drawings required:
1. Assembly of sauna internals indicating the construction of regiments and all elements (shop drawings)
Where to fasten the straps, insulation, thickness, other materials, etc. laying communications,
installation of ventilation
Studs
Shop lighting
Power temperature sensor
Illumination panels
3. Lighting plan
5. Ventilation plan