Professional Documents
Culture Documents
UDAS Linenjacket Downloadable Resized
UDAS Linenjacket Downloadable Resized
pattern
jacket by tina lewis
Project photo on page 42;
instructions on page 89
selvedges
Linen Jacket
44” main Front (A)
Sleeve (F)
)
(E
d
an
Side Front (B)
Front (A)
rB
lla
Co
Cuff (G)
Cuff (G)
Sleeve (F)
Side Back (C) Front (A)
Back (D)
fold selvedges
selvedges
Linen Jacket
54” main
Front (A)
Sleeve (F)
14 2 3/8 yds
16-18 2 1/2 yds
Front (A)
Front (A)
selvedges
Front (A)
Side Front (B)
Cuff (G)
Cuff (G)
)
(E
d
an
rB
lla
Co
Back (D)
fold selvedges
Cuff (G)
Cuff (G)
selvedges
Side Front (B) Sleeve (F)
Sleeve (F)
Side Front (B)
Back (D) Side Back (C)
fold
selvedges
selvedges
selvedges
Side Front (B)
Sleeve (F) Sleeve (F)
Cuff (G)
Cuff (G)
Back (D) Side Front (B)
16-18 3 yds
Back (D)
Sleeve (F)
selvedges
fold
Linen Jacket
58” interfacing
2-10 1 yd
Side Front (B)
Cuff (G)
selvedges
Linen Jacket
44” lining
Sleeve (F)
fold
Back (D)
Back (D)
Sleeve (F)
Sleeve (F)
selvedges
fold
selvedges
fold
Linen Jacket
44” lining
Side Front (B)
2-12 1 yd
14-18 1 1 /8 yds
XL
L
pattern
M
XS
S
M
S
L
XS
XL
downloaded.
L
XL
1 |
S
L
When prepar-
cut on fold
M
ing to print the pdf, Button + buttonhole
XS
S
make sure that you are placement marks Solid lines indi-
XS
printing it at 100% and cate buttonholes. A large open circle is
that there is no scaling. the button symbol and shows placement.
Check the settings for
page scaling (should be Test Square XS
S Cutting lines Multisize
“None”) and check the
2" 2" M
patterns have different cutting
preview to make sure L
XL cut on fold lines for each size.
that you will be printing
at full size. Make sure
that the box labeled Place on fold bracket This is
“Auto-Rotate and a grainline marking with arrows pointing
XS
Center” is unchecked to the edge of the pattern. Place on the
S
M (instructions apply specifically to Adobe Reader; if using ASYMMETRICAL FOLDS
fold of the fabric so that SKIRT
your finished
L RIGHT FRONT
XL another pdf reader, check for similar settings). piece will be twice the size of the pattern
|
2 To ensure that the pattern has printed at the correct scale, piece,cut 2 XXxx
without adding a seam.
XL
check the size of the TEST SQUARE. The Test Square
L
should be 2" × 2". Grainline The double-ended arrow
M
|
3 To begin assembling the pattern, cut off or fold the dotted should be parallel to the lengthwise
margin around each page.
grain or fold unless specifically marked
|
4 The pages are numbered in rows, so the first row of pages as crosswise. Bias grainlines will be
ASYMMETRICAL
1a, 1b, 1c, etc. Line up FOLDS
the rows andSKIRT
XL
Use the illustrated guide to match each piece. Once the pattern
cut 2 XXxx XS
Notches Notches are triangle-
S
is complete, find your size, pin the pattern to the fabric, and fol- S
M
XS
low the coordinating line to cut out or trace the pattern. L shaped symbols used for accurately
XL
matching seams. Pieces to be joined will
Layout, Marking + Cutting Guidelines have corresponding notches.
1 |
Find the lines that correspond to your size and trace cut on fold
the pattern pieces, either on tissue paper or directly onto Darts Dashed lines and dots mark
the fabric, using tracing paper and a tracing wheel.
darts. The dashed lines show where the
|
2 If you are cutting pattern pieces on the fold or cutting stitching will be, and the dot shows the
cut two
on of the same pattern piece, fold the fabric in half,
fold XL
position of the dart point (signaling the
selvedge to selvedge, with right sides together. Note that this
L
point, at the end of the dart, where your
M
S
S
XS
1a 1b 1c 1d 1e 1f
LINEN JACKET
CUFF (G)
cut 4 main (cut 2, cut 2 reverse)
cut 2 intefacing (cut 1, cut 1 reverse)
2,4,6,8,10,12,14,16,18
LINEN JACKET
SLEEVE (F)
cut 2 main (cut 1, cut 1 reverse)
cut 2 lining (cut 1, cut 1 reverse)
2a 2b 2c 2d 2e 2f
cut 2 interfacing (cut 1, cut 1 reverse)
2, 4, 6, 8, 10, 12, 14, 16, 18
2,4,6,8,10,12,14,16,18
LINEN JACKET
COLLAR BAND (E)
cut 1 interfacing
cut 1 main
2
center front
4
6
8
3a 3b 3c 3d 10
12
14
3e 3f
16
18
4a 4b 4c 4d 4e 4f
2,4,6,8,10,12,14,16,18
LINEN JACKET
cut 2 interfacing (cut 1, cut 1 reverse)
BACK (D)
cut 2 lining (cut 1, cut 1 reverse)
cut 2 main (cut 1, cut 1 reverse)
2,4,6,8,10,12,14,16,18
LINEN JACKET
SIDE BACK (C)
cut here for main
cut here for lining
LINEN JACKET
SLEEVE (F)
cut 2 main (cut 1, cut 1 reverse)
cut 2 lining (cut 1, cut 1 reverse)
1c
LINEN JACKET
CUFF (G)
cut 4 main (cut 2, cut 2 reverse)
cut 2 intefacing (cut 1, cut 1 reverse)
2,4,6,8,10,12,14,16,18
1d
1e
1f
2a
cut 2 main (cut 1, cut 1 reverse)
cut 2 lining (cut 1, cut 1 reverse)
2b
cut 2 interfacing (cut 1, cut 1 reverse)
2, 4, 6, 8, 10, 12, 14, 16, 18
2c
LINEN JACKET
SIDE FRONT (B)
cut 2 main (cut 1, cut 1 r
cut 2 lining (cut 1, cut 1 r
cut 2 interfacing (cut 1, cut
2,4,6,8,10,12,14,16,1
2d
CKET
T (B)
ut 1 reverse) cut 4
ut 1 reverse)
1, cut 1 reverse)
4,16,18
2
4
6
2e
LINEN JACKET
FRONT (A)
cut 4 main (cut 2, cut 2 reverse)
2,4,6,8,10,12,14,16,18
center
2f
LINEN JACKET
COLLAR BAND (E)
cut 1 main
cur 1 interfacing
2,4,6,8,10,12,14,16,18
3a
3b
cu
cu
4
6
8
3d 10
12
14
16
18
nter front
c
3e
3f
cut here for main
cut here for lining
4a
LINEN JACKET
SIDE BACK (C)
cut 2 main (cut 1, cut 1 reverse)
cut 2 lining (cut 1, cut 1 reverse)
cut 2 interfacing (cut 1, cut 1 reverse)
2,4,6,8,10,12,14,16,18
4b
cut here for main
cut here for lining
4c
4d
LINEN JACKET
BACK (D)
cut 1 main on fold
cut 1 lining on fold
cut 1 interfacing on fold
2,4,6,8,10,12,14,16,18
4e
4f