The document contains results from several simulations of plate deflection under different loading and boundary conditions. Tables show the deflection in meters of plates with thicknesses from 0.01 to 0.18 meters as calculated by MATLAB and ANSYS. The plates were subjected to point loads or uniform distributed loads. Boundary conditions included all edges clamped, all simply supported, adjacent edges clamped and simply supported, and long edge clamped and short simply supported. Deflection decreased as plate thickness increased for all conditions.
The document contains results from several simulations of plate deflection under different loading and boundary conditions. Tables show the deflection in meters of plates with thicknesses from 0.01 to 0.18 meters as calculated by MATLAB and ANSYS. The plates were subjected to point loads or uniform distributed loads. Boundary conditions included all edges clamped, all simply supported, adjacent edges clamped and simply supported, and long edge clamped and short simply supported. Deflection decreased as plate thickness increased for all conditions.
The document contains results from several simulations of plate deflection under different loading and boundary conditions. Tables show the deflection in meters of plates with thicknesses from 0.01 to 0.18 meters as calculated by MATLAB and ANSYS. The plates were subjected to point loads or uniform distributed loads. Boundary conditions included all edges clamped, all simply supported, adjacent edges clamped and simply supported, and long edge clamped and short simply supported. Deflection decreased as plate thickness increased for all conditions.
The document contains results from several simulations of plate deflection under different loading and boundary conditions. Tables show the deflection in meters of plates with thicknesses from 0.01 to 0.18 meters as calculated by MATLAB and ANSYS. The plates were subjected to point loads or uniform distributed loads. Boundary conditions included all edges clamped, all simply supported, adjacent edges clamped and simply supported, and long edge clamped and short simply supported. Deflection decreased as plate thickness increased for all conditions.
The results of deflections obtained from all clamped edge subjected to point load as follows in the table below.
S/ Thickness of Plate (m) Deflection (m)
N MATLAB ANSYS 1. 0.01 3.7994 x 10-6 4.0007 x 10-6 2. 0.03 1.2649 x 10-6 1.3336 x 10-6 3. 0.06 6.2978 x 10-7 6.6679 x 10-7 4. 0.09 4.1704 x 10-7 4.4452 x 10-7 5. 0.12 3.1002 x 10-7 3.3339 x 10-7 6. 0.15 2.4540 x 10-7 2.6671 x 10-7 7. 0.18 2.0208 x 10-7 2.2225 x 10-7 2. The results of deflections obtained from all edge Simply Supported subjected to point load as follows in the table below.
S/ Thickness of Plate (m) Deflection (m)
N MATLAB ANSYS 1. 0.01 3.7994 x 10-6 4.0009 x 10-6 2. 0.03 1.2649 x 10-6 1.3336 x 10-6 3. 0.06 6.2978 x 10-7 6.6681 x 10-7 4. 0.09 4.1704 x 10-7 4.4453 x 10-7 5. 0.12 3.1002 x 10-7 3.3334 x 10-7 6. 0.15 2.4540 x 10-7 2.6671 x 10-7 7. 0.18 2.0208 x 10-7 2.2226 x 10-7 3. The results of deflections obtained from adjacent long edge Clamped, adjacent short edge simply supported subjected to Uniform distributed Load as follows in the table below.
S/ Thickness of Plate (m) Deflection (m)
N MATLAB ANSYS 1. 0.01 4.0008 x 10-6 2. 0.03 1.3336 x 10-6 3. 0.06 6.6680 x 10-7 4. 0.09 4.4454 x 10-7 5. 0.12 3.3334 x 10-7 6. 0.15 2.6671 x 10-7 7. 0.18 -6.22583655280947e-07 2.2225 x 10-7 4. The results of deflections obtained from long edge Clamped, short edge simply supported subjected to a Point Load as follows in the table below. S/ Thickness of Plate (m) Deflection (m) N MATLAB ANSYS 1. 0.01 4.0009 x 10-6 2. 0.03 1.3336 x 10-6 3. 0.06 6.6681 x 10-7 4. 0.09 4.4454 x 10-7 5. 0.12 3.3340 x 10-7 6. 0.15 2.6672 x 10-7 7. 0.18 2.2226 x 10-7 1. The results of deflections obtained from Long Edge Simply Supported, Short Edge Clamped Subjected to Point Load as follows in the table below.