Professional Documents
Culture Documents
Increased Tightening Torque For Compressor Insert Fasteners: Instructions
Increased Tightening Torque For Compressor Insert Fasteners: Instructions
* Next opportunity: Action is necessary or recommended, but can be taken at the next opportunity.
Introduction
The enclosed service bulletin from Napier Turbochargers Ltd. provides information about
the increased tightening torque settings.
Enclosure
SB-358-NT1-12-A-090-02, Compressor Insert Fasteners, 3 pages.
Contacts
If technical support is needed, please create a TechRequest in Wärtsilä Online.
For services, spare parts and/or tools, please contact your nearest Wärtsilä
representative or the Customer Support Centre (CSC):
www.wartsila.com/csc
Mandatory
SUBJECT: COMPRESSOR INSERT FASTENERS.
A. TURBOCHARGERS AFFECTED
This bulletin applies to all NA358 and NT1-12 turbochargers.
C. SCOPE
Increasing the compressor insert fastener torque to 120Nm.
1. With the compressor inlet casing or air filter silencer removed the fasteners
will be exposed.
SB-358-NT1-12-A-090-02 Page 1 of 3
Napier Turbochargers Limited
Ruston House Registered Office: Napier Turbochargers
Limited
P.O. Box 1 Howard House, Graycar Business Park,
Barton Turn,
Waterside South Barton Under Needwood,
Lincoln LN5 7FD UK Burton on Trent
Tel: +44 (0) 1522 516665 Staffordshire DE13 8EN England
Fax: +44 (0) 1522 516669 Registered in England No. 06512358
Figure 1 compressor insert fastener locations
SB-358-NT1-12-A-090-02 Page 2 of 3
D. IMPLEMENTATION
This bulletin is graded MANDATORY. This activity can be performed at the next
service interval or maintenance opportunity.
Author J.Hallam
Product Support Engineer
Authorised
SB-358-NT1-12-A-090-02 Page 3 of 3