Professional Documents
Culture Documents
Enclosures: Wholesale Catalogue V1
Enclosures: Wholesale Catalogue V1
Cable Junction Boxes . . . . . DK Cable Junction Boxes (Indoor & Protected Outdoor) . . . . . . . . . 122
KF Cable Junction Boxes (Weatherproof) . . . . . . . . . . . . . . . . . . 123
WP Cable Junction Boxes (Waterproof) . . . . . . . . . . . . . . . . . . . . . 125
Features:
Material: Cold-rolled steel
Thickness: 1.2mm 200H x 200W to 600H x 600W
1.5mm 600H x 600W to 1400H x 1200W
Mounting Plate: 2mm galvanised sheet.
Sizes above 800mm height have folded edges for higher rigidity.
Depth adjustable in 12.5mm increments (Depth adjusting Brackets required)
Construction: Totally welded cabinet. Wall mounting by 4 x Ø9mm holes.
Double fold to prevent water from entering cabinet also acting as a gutter.
Earthing stud standard. Drainage hole on the base of cabinet to prevent condensation.
Door: 110˚ reversible opening. Welded reinforcement profiles for fitting accessories.
Concealed and removable hinges with quick assembly and disassembly pins.
Continuous polyurethane sealing gasket for higher IP rating.
Lock: Metal 5mm double bit lock.
Three point locking rods for cabinets of 1000H or greater as standard.
Other lock options available.
Finish: Coated in Hardened RAL 7035 Grey, UV Tolerant Polyester Powder coat or RAL 2008 Orange Epoxy Powder coat.
Corrosion resistance according to UNE-EN62208.
Ratings & UNE-EN 62208 & UNE-EN61439-1-3, UL508A,
Approvals: Bureau Veritas according to UNE-EN62208.
* Indent only.
ENCLOSURE PLINTHS
Features:
RAL 7035 Grey UV tolerant Polyester powdercoat Description Part No.
Steel Plinth 100H for 600W X 250D Grey RAL7035 ZCLA106025
Steel Plinth 100H for 600W X 300D Grey RAL7035 ZCLA106030
Steel Plinth 100H for 800W X 200D Grey RAL7035 ZCLA108020
Steel Plinth 100H for 800W X 250D Grey RAL7035 ZCLA108025
Steel Plinth 100H for 800W X 300D Grey RAL7035 ZCLA108030
Steel Plinth 100H for 1000W X 300D Grey RAL7035 ZCLA101030
Steel Plinth 100H for 1000W X 400D Grey RAL7035 ZCLA101040
Steel Plinth 100H for 1200W X 300D Grey RAL7035 ZCLA101230
LOCKS, KEYS
Description Part No.
Key lock assembly for single door (Key Code 333) KLA48456
Wing key lock assembly for single door (key code 333) WLA48457
Key metal 5mm double bit KM48460*
4WAYKEY WLA48457
Key plastic IDE 5mm double bit KP48449*
Four way enclosure key red plastic with chain 4WAYKEY
Padlock Cover 316 SS PLCMSB
THLC12130 KLA48456
Features:
Mounting Plate: 2mm Alu-zinc. Sizes above 800mm high have folded edges for added strength.
Construction: Fully welded. The front lip of the enclosure is folded to provide rigidity and forms a gutter to keep liquids from the gasket.
Door: Folded edges provide rigidity to the door. Doors open up to 120° and can be easily removed with lift-off type spring pin hinges. The gasket is
continuous formed polyurethane which provides excellent sealing and a high IP rating over a very long life. Doors are provided with stainless
steel double wing locks. A choice of locks and handles are available.
Rating & Approvals: Rated IP66, Lloyd’s Register, UL & CSA approved.
MOUNTING PLATES
Dimensions (mm)
Sheet Thickness (mm) Part No.
HxW
150 x 150 2 TBMP26300
200 x 150 2 TBMP26301
200 x 200 2 TBMP26303
300 x 150 2 TBMP26304
300 x 200 2 TBMP26305
300 x 300 2 TBMP26306
400 x 200 2 TBMP26309
400 x 300 2 TBMP26310
400 x 400 2 TBMP26311
500 x 200 2 TBMP26313
500 x 300 2 TBMP26314
600 x 200 2 TBMP26316
Features:
TERMINAL BOXES - STAINLESS STEEL
Material: Stainless steel AISI316 Dimensions (mm) Weight Part No.
Thickness: 1.5mm HxWxD (kg) Stainless Steel
Mounting Rails: 2mm Alu-zinc. 150 x 150 x 80 1.71 TS15158-6
Finish: Wet grinding (180) 300 x 150 x 80 2.63 TS30158-6
Construction: Terminal boxes are of fully welded 200 x 200 x 80 2.43 TS20208-6
type construction. The front lip of
300 x 200 x 80 3.17 TS30208-6
the enclosure is folded to provide
rigidity. 150 x 150 x 120 2.44 TS151512-6
Cover: The cover is lift-off type with 4 captive 300 x 150 x 120 3.52 TS301512-6
screws. The gasket is continuous 200 x 200 x 120 3.26 TS202012-6
formed polyurethane which provides 300 x 200 x 120 4.11 TS302012-6
excellent sealing and a high IP rating
400 x 200 x 120 4.96 TS402012-6
over a very long life.
300 x 300 x 120 5.26 TS303012-6
Ratings & Approvals: IP66 / UL & CSA approved.
ACCESSORIES
Description Part No.
Stainless steel wall mounting bracket set pk4 TSWMB
VIRDIS Fan Filter and Grill Filter units for ventilation and cooling
Features:
Rated 230V AC, 50/60Hz. Units for other voltages available on request.
Colour Grey RAL7035.
Degree of protection IP54 with IP55 filters available as an option on
some sizes.
Standard air flow “B” (from outside to inside) reversible for “A” flow.
Self-extinguishing according to UL94V-0.
UL & CSA approved.
Permanent sealing gasket in polyurethane foam.
DOOR SWITCH
Description Rated Current AC Part No.
Door switch 24-400VAC for floor standing encl 10mA - 1.8A FC001
ACCESSORIES
Description Part No.
Fixing Bracket for door limit switch SA-FC01
HEATERS
Description Rating Part No.
Heater 110-240V AC/DC 15W HWM015 #
Heater 110-240V AC/DC 30W HWM030 #
Heater 110-250V AC/DC 45W HTM045 Δ
Heater 110-250V AC/DC 60W HTM060 Δ
Heater 110-250V AC/DC 80W HTM080 Δ
Heater 110-250V AC/DC 100W HTM100 Δ
Heater 110-250V AC/DC 150W HTM150 Δ
VENTILATED HEATERS
Description Rating Part No.
Ventilated Heater 230V AC 250W HVMS250THP-230
APO ACCESSORIES
MOUNTING PLATES - PERTINAX - 5mm
Dimensions (mm)
Part No.
HxW
140 x 105 APO1MPP
228 x 139 APO31MPP
254 x 228 APO41MPP
298 x 254 APO71MPP
413 x 254 APO51MPP
484 x 254 APO81MPP
528 x 254 APO61MPP
528 x 324 APO11MPP
555 x 555 APO12MPP
APO ACCESSORIES
Description Pack Qty Part No.
Air Vents (IP44) 1 APOAV
ARIA ACCESSORIES
FULL COVER PLATES - PLAIN WITHOUT CUT-OUTS
Description Part No.
Cover Plate for ARIA32 ARIA32CP
Cover Plate for ARIA43 ARIA43CP
Cover Plate for ARIA54 ARIA54CP
Cover Plate for ARIA64 ARIA64CP
Cover Plate for ARIA75 ARIA75CP
Cover Plate for ARIA86 ARIA86CP
With Knockouts
210 x 155 x 92 DK1600G
255 x 205 x 112 DK2500G
Polycarbonate Grey
295 x 225 x 122 DK3500G
355 x 255 x 122 DK5000G
TERMINALS
Current
Description Part No.
Rating (A)
Terminal 1.5-4 mm², 5-pole, 2 clamps per pole,Use Support DKKH02/04/06 20 DKKL02*
Terminal 1.5-6 mm², 5-pole, 2 clamps per pole,Use Support DKKH04/06 32 DKKL04*
Terminal 1.5-10 mm², 5-pole, 2 clamps per pole,Use Support DKKH06 40 DKKL06*
Terminal Set 2.5-16 mm²,5-pole, 2 clamps per pole,For KF10.. 63 DKKS10
Terminal Set 6-25mm², 5-pole, 2 clamps per pole,For KF16.. 102 DKKS16
Terminal Set 6-35mm², 5-pole, 2 clamps per pole,For KF25.. 102 DKKS25
Terminal Set 16-35mm², 5-pole, 2 clamps per pole,For KF35.. 125 DKKS35
Terminal Set 16-50mm², 5-pole, 2 clamps per pole,For KF50.. 150 DKKS50
* Terminals Require a Support to mount
TERMINAL SUPPORTS
Description Part No.
Terminal Support for KF 02.. Boxes will support DKKL 02 DKKH02
Terminal Support for KF 04.. Boxes will support DKKL 02/04 DKKH04
Terminal Support for KF06../KF10.. Boxes will support DKKL 02/04/06 DKKH06
DIN RAILS
Description Part No.
Din rail 67x15x5.5mm for KF02.. with fixing screws DKTS02
Din rail 77x15x5.5mm for KF04.. with fixing screws DKTS04
Din rail 97x35x7.5mm for KF06.. with fixing screws DKTS06
Din rail 147x35x7.5mm for KF10.. with fixing screws DKTS10
Din rail 175x35x7.5mm for KF16..with fixing screws DKTS16
Din rail 218x35x7.5mm for KF25..with fixing screws DKTS25
Din rail 256x35x7.5mm for KF35..with fixing screws DKTS35
Din rail 314x35x7.5mm for KF50.. with fixing screws DKTS50
FK-FIRE RATED
CABLE JUNCTION BOXES IP65/IP66
• Polycarbonate - Orange
• Steel Powder coated - Orange
ACCESSORIES
SPARE SEALING COMPOUND
Description Part No.
Set Sealing compund for WP02.. , 350ml GH0350
Set Sealing compund for WP04.. , 500ml GH0500
Set Sealing compund for WP06.. , 850ml GH0850
Set Sealing compund for WP10.. , 1200ml GH1200
Note: Sealing plug included
DIN RAILS
Description Part No.
DIN Rail for MI01 134 x 35 x 15mm MITS15
DIN Rail for MI02 284 x 35 x 15mm MITS30
DIN Rail for MI03 434 x 35 x 15mm MITS45
DIN Rail for MI04 584 x 35 x 15mm MITS60
Spacer for DIN Rail Height 25mm MIDS25
Spacer for DIN Rail Height 50mm MIDS50
HINGES
Description Part No.
MI Hinge Set for Lids MIZS20
Lid Lock (includes cylinder lock, key, locking device insertion, dust cover) MIZS11
Orange
H-BASE 600 x 400 x 200 3 x 26 Din HMSB406020A
H-BASE 600 x 600 x 200 4 x 26 Din HMSB606020A
H-BASE 600 x 1000 x 200 6 x 26 Din HMSB106020A
Features:
H-BASE INSULATED ENCLOSURES
GE double wall (outer steel wall + inner insulated Description (mm) No. of
Part No.
extruded wall) enclosure. (W x H x D) Modules
A high impact rating of IK08 against external H-BASE 300 x 800 x 210 5 x 12 Din HBP308021
mechanical impacts. H-BASE 550 x 650 x 210 4 x 24 Din HBP556521
Includes DIN front plate & mounting rails. H-BASE 550 x 950 x 210 6 x 26 Din HBP559521
Colour RAL 9016.
Clear door
Supplied fully assembled with circuit labels and
closing handle.
IP43 Rating