Professional Documents
Culture Documents
Infusion Pump
Infusion Pump
Infusion Pump
Step 1:
Step 2:
1. Prepare fluid that will be administered to the patient and prime the IV tubing
2. Ensure that the machine is plugged correctly into suitable electrical socket
3. Open the channel door of the infusion pump and align the IV tubing to the
channel and close it
4. Set up the desired rate to be infused per hour and the total amount of volume to
be infused
5. Press start and always remember to open the roller clamp of the tubing
References:
https://www.bbraun.com/content/dam/catalog/bbraun/bbraunProductCatalog/S/AE
M2015/en-01/b6/meliseptol-
wipessensitivecleaninganddisinfectionspacestation4005.pdf
http://its.uvm.edu/FAHC_Alarms/Shep3South/Alaris.html