Professional Documents
Culture Documents
Statement: Wirelsee Kit
Statement: Wirelsee Kit
Statement: Wirelsee Kit
KIT
Statement
Thank you for purchasing our product! This quick user guide will talk about main usages of the
product.More information can be found on our website and the help center. This user guide may
contain inaccurate content due to hardware and software upgrade.It is subject to change without
previous notice.
Safety Caution
1.Please do not put any fluid container on the product.
2.Please use the product in ventilated environment and prevent blocking the vents.
3.Please use included power supply with the product to prevent damage to the product.
4.Please use the product under its standard working temperature and humidity.(advised in this
manual or distributor’s website)
5.Dust on PCB may cause short circuit.It is suggested to clean the dust on PCB timely to make the
product work properly.
6.Please obey the regulation and policy in your country and area during the installation of this.
Before Installation
This product may require cabling , we suggest to test all products&parts before installation and
cabling.
NVR
1、WIFI Antenna Ports:Double antennas to WIFI range
2、WAN Port:Connect your NVR to Internet
3、VGA Port:For viewing on VGA monitor
4、HDMI Port:For viewing on HDTV
5、USB Ports:For mouse and backup
6、Power Input
IPC
1. IPC with RJ45 connector
①W WIFI antenna:: WiFi connecction with NV VR;
②DC C Port: input power 12V 11A;
③RJJ45 Port: for matching cod de and wiredd connection between IPC and NVR. Ouur WIFI NVR KIT is
alreaady matchedd code beforre leaving faactory. If use
ers need to re‐match coode or use wired
w
connnection, please refer to ho
ow to add IP camera as be elow.
2. IP
PC without RJ45 conne
ector
①WWIFI antenna:: WiFi connecction with NV VR;
②DC C Port: input power 12V 11A;
③Reeset button::press reset button for 110 seconds to
t restore fa
actory settingg and enter into
matcching‐code mmode.
Insttallation IInstruction Of WIFI NVR KIT
Notte:
Wireless NVR can’t
c be co
onnected too WIFI route
er wirelessly at presennt. They can be
onlyy connected
d by networrk cable.
Settup The Syystem
This system
m is standalone with eembedded Linux Operrating Systeem in the NVR.
N
Justt like a deskktop PC, neeed to hookk a screen tto the NVR to enter thhe OS. Any TV ,
mon nitor with VVGA or HDM MI input shoould work fo
or it.
1、IInstall antenn nas for camerras and the N
NVR;
2、C Connect a scrreen to the N
NVR via its HDDMI or VGA port(HDMI and VGA cable not included);
3、P Plug the NVR to power(use bigger 12V V 2A power ad dapter);
4、P Plug camerass to power(usse smaller 12V V 1A power aadapters);
5、W Within seconds, you should see camerra’s images on the screen;
6、P Plug the mouse(included) to an USB poort on back off NVR. You sh hall then be aable to operatte on
the ssystem.
In th
he OS you caan find fullestt functionalitties includingg live view, re
ecord, playbaack, video baackup
and all settings.
Defaault ID: admin Password: none (meanss leaving the password em mpty, just clicck login)
Tips:To protectt your privacyy, please set your passwo ord at earliesst conveniencce. Right click the
mou use→Go to Syystem Setup→ →System Ad min →User Management to set passw word.
HD Install
the system may not include hard disk deepending on the kit you selected.
s the NVR works most
3.5" SATA HDD o
or 2.5"SATA H
HDD
Unplug your NVR from po
1、U ower,unscrew
w and remove
e the top cove
er.
2、C
Connect the SATA power and data ca bles from the NVR to the
e correspond ing ports on your
HDD
D (as shown).
3、h holding the hard
h drive an
nd the DVR ,,gently turn it over and line up the hholes on the hard
drivee with the hooles on the NNVR. using a pphillips screw wdriver,screw w the provideed screws into o the
holees and assemble the coverr.
Notee:New HDD D have to be fformatted beefore recordin ng.
To get better WIFI sign
nal, it had bettter place the
e NVR in open area and hiigh position.
Reccord Video
o
Recoord video is vvery easy on ccamera syste m.
1、TTime Recordiing: Setup pe eriod of timee of recordingg on NVR GU UI .Right clickk mouse→Syystem
Setu
up→Record setup→Reco ord Plan.Clicck “time”aand put mo ouse icon onn the upperr left
corn
ner(for examp ple“1”as p picture showss),press and drag the mou use to the rigght to choosee the
timee.The list will turn to red.
2、M Motion Reco ording: Only detect motio
d on and then start recordin
s ng.Right clickk mouse→Syystem
Setu
up→Record setup→Reco ord Plan.Clickk“motion”and put mo ouse icon onn the upperr left
corn
ner(for examp ple“1”as p picture showss),press and drag the mou use to the rigght to choose e the
timee. The list willl turn to gree
en.
3、A Alarm record ding: Right click mousee→System Setup→Reco
S rd setup→RRecord Plan.Click
“Allarm”and put p mouse icon on thhe upper le or example “1”as piccture
eft corner(fo
showws),press and d drag the mo ouse to the riight to choose the time. The list will tu rn to yellow.
Notee: Users can setup any period
p me they want,for example
of tim e 0:00:00‐23: 59:59,That’s 24
hourrs *7 days recording.Whe en NVR deteccts hard disk,tthe default setting will bee 24 hours*7 days
reco
ording.
Vid
deo Playbaack
Step ps:right clik mouse
m in maain menu→V Video playbaack→choose date,channeel,record mode→
clickk search→theen can view p playback file.
Warrm prompt:
1. IIIustration fo
or playback b
button: play, pause: fast forward *2,*4,*8;
2. Play file: Cho
oose the recoording file in file list,as nu umber“1”sshown in piccture. Choose e one
of the recordding, click “p
play”to playy to recordingg file;
3. Video backup: Choose thhe recording file in file lisst,as numberr“1”shownn in picture.insert
the U flash disk, click “video backup” ”to backup tthe file;
4. Timeline: Click “date”a and “time” ”at left bottom to check k the timelinee of recordin
ng, as
number“2” ”shown in picture;
5. On the timeline with reco ording file,leftt click the mo ouse, the can playback thee file.
Vid
deo Backup
Usee U disk to
o copy vide
eo,so easyy and convvenient!
1、22 USB ports: Plug U flash d
disk into the USB port of N
NVR. Right click on main m
menu→Video
o
backkup→choose backup chan
nnel→choosee video mode →search→cho
e→setup searching time→ oose
reco
ording file on the list→video backup (s upport 32G U
U flash disk a
at max. Recorrding file is
packked one hourr per time.)
2、11 USB port: Riight click on m →video backup→choose b
main menu→ backup channnel→choose vvideo
de→setup seaarching time→search→chhoose record
mod ding file on the list→videoo backup, inse
ert U
h disk within reminding 1 minute, thenn the system w
flash will backup re
ecording file to U flash dissk.
Vieew On PC V
Via IE(Inte
ernet Explorer)
1、W
When your PC is in same LLAN with the NVR(normally means th
hey are conneected to the ssame
routter)
Step
p1.Find the IP address an
nd port# of yyour NVR(IP address can be found inn System Setup→
Netwwork Setup).
Step
p2.Enter the N NVR’s IP ad ddress in yourr IE browser ffor example: http://192.11.1.7(If the de
efault
WEBB port 80 hass been changed e.g. to 1000,you’ll need to add new port numbber when inp put IP
addrress in the brrowser, for exxample: http:://192.168.1..7:100).
2、W When your PC P is out of local area nnetwork with
h the NVR(Foor example: view your home
h
cameras from your office PC).Access with D Device Cloud
d ID
Step
p 1. Open you ur Internet Exxplorer(IE) broowser and vissit:www.e‐se eenet.com.
Step
p2. Input Device ID, User n name and passsword to loggin.
(Devvice ID can be found at the right bbottom corneer of the NV
VR monitor, status should be
“ONLINE”, default User name is “admin”, aand default Paassword is em mpty.)
Vieew On Mo
obile
1、D Download thee APP “IP PRO O3.0”
Userrs can use cellphone to sccan the QR coode below to
o install the A
APP free of chharge,or users can
searrch “IP Pro 3
3.0”on APP store or Googgle Play then install the APP .
Notee:For IOS systtem,it require
es IOS 8.0 verrsion or abovve.For android
d, android 4.44 or above.
2、A Add the NVR system to yo our APP devicce list
Run the APP “IP P with your accoount or choosse Trial→Click“+”to “A
PRO”, login w Add device b by ID”
(fin VR’s Networkk setup, or rright bottom corner on screen),Descr
nd it the NV s ription(e.g. Home
H
Cammera), User naame (default user name iis “admin”)an nd password(default is em mpty)→Subm mit to
back to your device list→C
get b Click the deviice to view th he cameras.
Tips: if you’ve sett a password on your NVR R system, pleaase update yo our passwordd on APP to view.
Playback On Mobiles
In th
he IP PRO AP k Playback, yyou will enter the
PP,while viewing live vvideo of the system, click
remote playbackk menu. The A APP automattically playbaack camera 1, you can sw witch channels the
CH.
Tips: Videos in playback are HHD@real timee which requ uires very goo od transmissiion condition n. We
sugggest to playbaack in LAN. R
Remote playbback out of LA AN may not 100% work ddue to connection
& neetwork condittion.
MEENU‐DO W
What
Meenu bar
n you can entter the main menu; click right button again you ca n exit the current
Clickk right button
men nu or return.
Splitt screen: chaange status oof live view. YYou can chooose to view mmultiple cameeras or any ssingle
camera.
Videeo Manage: m manage IP cameras and NV VR channels.
System setup: all system settings.
Videeo playback: playback reco orded videoss.
Videeo backup: baackup recorded videos.
or adjust: adjust the image
Colo e setting of e ach camera.
Man nual record: sshortcut to chhange the reccord settings..
Volu
ume: Adjust vvolume of aud dio cameras(w works only fo
or audio cameeras).
Setu
up Wizard: steep by step gu uide of 1st tim
me general se ettings.
Fast Network: sh hortcut to nettwork settinggs.
Wifi add: add IP cameras into o NVR channeels wirelessly.
Adjuust channel: aadjust the ordder of the NV VR channels.
Exit System: logo out, reboot, close screen ooutput and sh hut down thee system.
Sysstem Setup
Clickk right button n→Choose Syystem setup;; you then sh
hall enter the menu that eenables you tto do
all seettings relateed to this systtem.
General setup(This enab bles you to seet)
Langguage
Timee
Dispplay resolution
HDD D informaion
System adm min(This enab bles you to seet)
System version
System maintenaance including system upggrade
Userr and passwo ord managem ment
Resttore to default settings
System log
Record setu up(This enables you to sett)
Reco ord plan for eeach channel video detecttion
Network settup(This enables you to seet)
All network relaated settings
Channel settup(This enab bles you to seet)
Man nage channelss and camera as
Add
d wirelesss camera
Befoore leaving faactory, NVR kit is already m matched code, the image will come ouut when the kit is
powwered. Anywaay, there is range limitatioon for the WIFI signal from m NVR. Whenn cameras are e out
his range, they can’t be connected
of th c too NVR wirelessly. Then ussers can use network cab
ble to
conn nect camerass and NVR, as picture show wed below:
Stepp 1: plug NV VR and cammeras to pow wer, after N NVR start, right click moouse→Wifi add
→m match‐code interface, NVR will search camera unde er matchinng code model
auto omatically.
Stepp 2: wirelesss camera has
h two kinnds, includiing camera with RJ45 connector and
cammera withou ut RJ45 conn nector, theirr way to maatch code ass below:
① for camera with RJ45 connector,, after startt, use network cable tto connect with
NVR R, match code automattically, no n eed to resto ore.
② for camera without RJ45 connecttor, after staar, hold the bottom lin e of cameraa for
10 sseconds to get in mattch code m odel, it will match cod
de automattically, no need
n
netw work cable..
Stepp 3: when yyou can find d IP addresss of cameraa on screen,, matching ccode complete,
clickk “Exit” to ffinish.
Nottes: for cam mera withou ut RJ45 connnector, its p process of g getting into matching ccode
will last 10 minuets. Afte
er 10 minueets, please restore cam mera to gett into matcching
code model again.
Exttend WIFI Range
Wireeless connecttion is easy a
and convenieent, but it’ss not universal applicationn. Because o
of the
charracter of WIFI, the WIFI signal will ddecrease wh
hen going through some obstacles. Some
S
methods can be aapplied to byypass obstaclees and extend WIFI range.
1、Position The Anten
nna Correectly
WIFI range is likee an apple and
d the antenn a of NVR is in of it. WIFI signnal is strong all
n the center o
und the WIFI range. Anten
arou nna of NVR shhould be put straight up, if not, WIFI siignal will be w
weak.
Acco
ording to the signal transm
mission charaacter of anten
nna, the antenna of camerras should
overrlap or paralleel to NVR WIFI range, as ppictures show
wed below:
2、Use Ante
enna Exten
nsion Cord
d to prolo
ong WIFI d
distance
Instaallation meth
hod of antenn
na extension cord
Notees:When WIFFI signal is not strong enouugh against w walls,users can take off thee original antenna
and subtitute an
ntenna extennsion cord. D
Drill a hole on
o the wall to let the eextension corrd go
thro
ough and simp ply it where W
WIFI signal is strong.
Sett up cascading conn
nection in
n a reasonable soluttion,extennd wifi siggnal
tran
nsfer distaance
Notee:
1. Reepeater functtion can’t sstrengthen W
WIFI signal for wireless NVR
R kit, but can extend the
distaance by repeaaters ‐‐ WIFI cameras.
2. Only when thee repeater cameras and reepeated came
eras are posittioned correcctly, WIFI
distaance will be eextended.
3. Reepeater functtion and 3 meters antennna extension ccord are two methods to eextend WIFI
rangge. Users can choose one a
according to real situation
n.
Rep
peater Settup
Step GUI, left clickk “video management”→
p 1: Right click on NVR’S G → then left cclick “repeatter”
Step
p 2: Add repeater
As p
picture shown
n below, clickk icon + besidees channel 3,, choose othe
er channel.
Step
p 3: As picturee shown belo ected to NVR through IPC22 and IPC3. IP
ow, it means IPC1 is conne PC2
is co
onnected to N
NVR through IPC3. IPC3 is connected to
o NVR directlyy.
p 4: Click “Apply” and th
Step hen click “reefresh” to ccheck if the se
etting is succeessful.
Dellete Repeaater
Movve the mousee to targeted channels, left ete, and then click “Applly” and “O
ft click to dele OK”.
App
plication EExample
As p
picture shown
n above, when IPCAM1 is put somewhe
ere is out of N
NVR WIFI rannge, and there is
IPCA
AM2 between
n them with sstrong WIFI s ignal, users ccan put IPCAM
M1 close to N
NVR and powe
er it,
setu
up IPCAM1 repeated by IPCAM2, and thhen install IPCAM1 to the presupposedd place.
warning
otes:
No
Devvice will not in
n guarantee if caused by bbelow reason n:
A.Acccident;negligence;disaste er; mis‐operaation.
B.Doo not conform to the environment
e and conditioons,such as power imprroper, workin
ng
tem
mperature Too o hight or too
o low, lightninng stroke.ectt.
C.Evver be maintaained by othe er center whiich not belong to the real factory.
D.G
Goods alreadyy sold more tthan 12 montths.
FCC
C RADIATION NORM
M
FCC
C
This device complies with Pa
art 15 of thee FCC Rules. Operation is subject to tthe followingg two
condditions: (1) th
his device maay not causee harmful inte erference, annd (2) this deevice must acccept
any interference received, inccluding interfeerence that m may cause undesired operration.
FCC
C Compliance Statement
This equipment h has been testted and founnd to comply with the limits for a Classs B digital de evice,
purssuant to part 15 of the FCC Rules. Thesse limits are designed to provide reasoonable protection
against harmful iinterference in a residenttial installatio on. This equip pment generaates uses and d can
radiaate radio freqquency energgy and, if nott installed and d used in accordance withh the instructtions,
mayy cause harmful interferen nce to radio communicattions. However, there is nno guarantee e that
interrference will not occur in
i a particulaar installatio on. If this equipment doees cause harrmful
interrference to raadio or televiision receptioon, which can n be determined by turninng the equipment
ouraged to trry to correctt the interferrence by onee or more of the
off aand on, the user is enco
follo
owing measurres:
‐ Reo orient or relo
ocate the rece eiving antennna.
‐ Inccrease the sepparation betw ween the equuipment and receiver.
‐Con nnect the equipment into o an outlet oon a circuit different from that to whicch the receivver is
conn nected.
‐Con nsult the dealler or an expe erienced radiio/TV techniccian for help.
FCC
C Radiatio
on Exposure Statem
ment:
This equipment complies with
w FCC rad iation expossure limits set forth for an uncontrrolled
environment. Th
his equipmen
nt should be installed and
d operated with
w minimu m distance 20cm 2
betw
ween the radiator & your b
body.
CAU
UTION!
The Federal Com
mmunicationss Commissionn warns the user that changes or moodifications too the
unit not expresssly approved
d by the parrty responsib
ble for comp
pliance couldd void the user’s
u
auth
hority to operrate the equippment.