Professional Documents
Culture Documents
Msds Promotor P-Ex
Msds Promotor P-Ex
Chemicals Manufacturer
id
HEAD OFFICE : Wisma Justus
Jl. Danau Sunter Utara No. 27-28, Blok O3, Jakarta 14350
(Seberang Kantor PT Toyota Astra Motor – Sunter)
Phone : (021) 6515188, 65306066; 65304880 (Hunting)
o.
Fax : (021) 65305066
E-mail : general_jsr @ justus.Co.id
Website : http://www.justus.co.id
.c
PHONE : (021) 4401616, 4400360
3. HAZARDS IDENTIFICATION :
Flammable
Causes irritation to eyes, skin and respiratory tract.
w
Important: While the descriptions, designs, data and information contained herein are presented in good faith and believed to be accurate, it is provided for your guidance only. Because
many factors may affect processing or application/use, we recommend that you make tests to determine the suitability of a product for your particular purpose prior to use. No warranties of
any kind, either expressed or implied, including warranties of merchantability or fitness for a particular purpose, are made regarding products described or designs, data or information set
forth, or that the products, designs, data or information may be used without infringing the intellectual property rights of others. In no case shall the description, information, data or designs
provided be considered a part of our terms and conditions of sales. Further, your expressly understand and agree that the descriptions, designs, data, and information furnished by PT Justus
Sakti Raya hereunder are given free and PT Justus Sakti Raya assumes no obligation or liability for the description, designs, data and information given or results obtained, all such being
given and accepted at your risk.
Page 1 of 4
PT JUSTUS SAKTI RAYA
Chemicals Manufacturer
id
Ingestion : Do not induce vomitting without medical advice. If conscious, drink plenty of water. Ingest activated charcoal.
Never give anything by mouth to an unconscious person
o.
5. FIRE-FIGHTING MEASURES :
Suitable extinguishing media :
.c
- Small fire : Use dry chemical or CO2.
- Large fire : Use foam or water spray.
us
6. ACCIDENTAL RELEASE MEASURES :
* In case of spill or leak : Keep people away and upwind. Shut off leak if this can be done without
st
risk. Contain spilled material, absorb with sand, earth or vermiculite and
sweep up or shovel into dry clean container.
Large fire; use foam or water spray. Cool container exposed to fire with water. Wear self-contained
breathing apparatus and full protective clothing including boots.
w
- Yukalac® Promoter P-EX may be stored for several months if care is taken that the containers are well closed.
- Owing to the presence of inflammable solvent, for safety reasons, it is advisable to avoid excesive storage temperature ( if possible
not exceed 250C ).
w
- The normal practices for handling and using chemical products ( wearing of gloves, gogles, protective clothing, etc) should be
followed.
Important: While the descriptions, designs, data and information contained herein are presented in good faith and believed to be accurate, it is provided for your guidance only. Because
many factors may affect processing or application/use, we recommend that you make tests to determine the suitability of a product for your particular purpose prior to use. No warranties of
any kind, either expressed or implied, including warranties of merchantability or fitness for a particular purpose, are made regarding products described or designs, data or information set
forth, or that the products, designs, data or information may be used without infringing the intellectual property rights of others. In no case shall the description, information, data or designs
provided be considered a part of our terms and conditions of sales. Further, your expressly understand and agree that the descriptions, designs, data, and information furnished by PT Justus
Sakti Raya hereunder are given free and PT Justus Sakti Raya assumes no obligation or liability for the description, designs, data and information given or results obtained, all such being
given and accepted at your risk.
Page 2 of 4
PT JUSTUS SAKTI RAYA
Chemicals Manufacturer
id
- Eye protection : Tightly fit safety goggles.
- Hand protection : Rubber gloves.
- Skin and body protection : Wear as appropriate : apron, boots.
- Hygiene measures : Avoid contact with skin and eyes. Wash hands before break and at the end of workday.
o.
.c
9. FIRE AND EXPLOSION HAZARDS :
- Yukalac® Promoter P-EX is considered inflammable owing to the presence of solvent (flash point about 25ºC).
- Fire fighting means : foam, powder and water extinguishers.
us
st
10. STABILITY AND REACTIVITY
Stability : Yukalac® Promoter P-EX is stable, if stored and handled as
prescribed.
.ju
This product belongs to the category slightly toxic. The toxicity of this product is mainly due to the presence of solvent and to that of
organic compounds.
The presence of solvent in Yukalac® Promoter P-EX may cause irritation to eyes, skin and respiratory tract. Appropriate ventilation
w
must hold solvent concentration below TLV-TWA and TLV-STEL values prescribed by existing regulations.
*Classification recommended by ECC-No. 76/907 :
Symbol : Xn (harmful)
w
R Phrase : R 10 = inflammable
R 20 = harmful by inhalation
S Phrase: S 24/25 = avoid contact with skin and eyes.
Important: While the descriptions, designs, data and information contained herein are presented in good faith and believed to be accurate, it is provided for your guidance only. Because
many factors may affect processing or application/use, we recommend that you make tests to determine the suitability of a product for your particular purpose prior to use. No warranties of
any kind, either expressed or implied, including warranties of merchantability or fitness for a particular purpose, are made regarding products described or designs, data or information set
forth, or that the products, designs, data or information may be used without infringing the intellectual property rights of others. In no case shall the description, information, data or designs
provided be considered a part of our terms and conditions of sales. Further, your expressly understand and agree that the descriptions, designs, data, and information furnished by PT Justus
Sakti Raya hereunder are given free and PT Justus Sakti Raya assumes no obligation or liability for the description, designs, data and information given or results obtained, all such being
given and accepted at your risk.
Page 3 of 4
PT JUSTUS SAKTI RAYA
Chemicals Manufacturer
Waste from residues / unused product : Depending on regulations, by incineration or controlled dumping. The product is
a ‘hazardous waste’ due to its characteristic of ignitability.
Contaminated packing : Wash containers with caustic soda, steam and water to remove flammable residues before
reconditioning or destroying. Discard in authorized landfill in accordance with all
applicable regulation. Do not incinerate containers.
id
13. TRANSPORT INFORMATION :
o.
Flammable liquid. Avoid all ignition sources. Store in accordance with State Regulations. Protect from heat, humidity and direct
sunlight.
.c
us
st
.ju
w
w
w
Important: While the descriptions, designs, data and information contained herein are presented in good faith and believed to be accurate, it is provided for your guidance only. Because
many factors may affect processing or application/use, we recommend that you make tests to determine the suitability of a product for your particular purpose prior to use. No warranties of
any kind, either expressed or implied, including warranties of merchantability or fitness for a particular purpose, are made regarding products described or designs, data or information set
forth, or that the products, designs, data or information may be used without infringing the intellectual property rights of others. In no case shall the description, information, data or designs
provided be considered a part of our terms and conditions of sales. Further, your expressly understand and agree that the descriptions, designs, data, and information furnished by PT Justus
Sakti Raya hereunder are given free and PT Justus Sakti Raya assumes no obligation or liability for the description, designs, data and information given or results obtained, all such being
given and accepted at your risk.
Page 4 of 4