Professional Documents
Culture Documents
Machining Process
Machining Process
Machining Process
Machining process
2. Facing
All surfaces go through facing process to smoothen the
side/surface.
3. Flat turning = 1mm
The cylindrical material goes through flat turning to change the
dimension of the diameter.
4. Grooving
To cut the cylindrical material with certain depth
5. Chamfering
To change the sharp material into dull material before it goes to
threading. Chamfering happens on both ends after drilling, to
smoothen out the rough surface, and happen after grooving with a
certain angle according to the shape of the wanted piece.
7. Knurling
To make certain pattern on the cylindrical work piece
Knurling
8. Cut off
Cut off the clamp part for the finish product