Professional Documents
Culture Documents
Fh6-Dk DGBRLLZ Eng 2458
Fh6-Dk DGBRLLZ Eng 2458
HIGH POWER
SPEAKER
SYSTEM
MODEL
FH6
www.lg.com
*MFL69492458* Copyright © 2017 LG Electronics. All Rights Reserved
Getting Started 3
Getting Started
The openings shall be never be blocked by placing
CAUTION: TO REDUCE THE RISK OF ELECTRIC the product on a bed, sofa, rug or other similar
SHOCK DO NOT REMOVE COVER (OR BACK) surface. This product should not be placed in a built-
NO USER-SERVICEABLE PARTS INSIDE REFER in installation such as a bookcase or rack unless
SERVICING TO QUALIFIED SERVICE PERSONNEL. proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
This lightning flash with arrowhead NOTICE: For safety marking information including
symbol within an equilateral product identification and supply ratings, please refer
triangle is intended to alert the to the main label on the bottom or the other surface
user to the presence of uninsulated of the product.
dangerous voltage within the
CAUTION concerning the Power Cord
product’s enclosure that may be of
sufficient magnitude to constitute Most appliances recommend they be placed upon a
a risk of electric shock to persons. dedicated circuit;
The exclamation point within an That is, a single outlet circuit which powers only
equilateral triangle is intended that appliance and has no additional outlets or
to alert the user to the presence branch circuits. Check the specification page of this
of important operating and owner’s manual to be certain. Do not overload wall
maintenance (servicing) outlets. Overloaded wall outlets, loose or damaged
instructions in the literature wall outlets, extension cords, frayed power cords, or
accompanying the product. damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK appliance, and if its appearance indicates damage
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN or deterioration, unplug it, discontinue use of the
OR MOISTURE. appliance, and have the cord replaced with an exact
CAUTION: The apparatus should not be exposed to replacement part by an authorized service center.
water (dripping or splashing) and no objects filled Protect the power cord from physical or mechanical
with liquids, such as vases, should be placed on the abuse, such as being twisted, kinked, pinched, closed
apparatus. in a door, or walked upon. Pay particular attention to
WARNING: Do not install this equipment in a plugs, wall outlets, and the point where the cord exits
confined space such as a book case or similar unit. the appliance.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
4 Getting Started
Symbols
Getting Started
1 Refers to stand-by.
Table of Contents 26
26
– Improving poor FM reception
– Presetting the Radio Stations
26 – Deleting all the saved stations
27 – Seeing information about a Radio station
28 Sound adjustment
1 Getting Started 28 – Setting the sound mode
3 Safety Information 28 – Setting the USER EQ
8 Unique Features 29 Advanced Operations
8 Playable file Requirement 29 – Recording to USB
8 – Music file requirement 31 – JUKE BOX Playback
9 – Compatible USB Devices 32 Other Operations
9 – USB device requirement 32 – Turn off the sound temporarily
10 Remote control 32 – Displaying file information
12 Top panel (ID3 TAG)
14 Front panel / Rear panel 32 – DEMO
15 How to place the unit 32 – Using Microphone
33 – VOICE CANCELLER
33 – KEY CHANGER
2 Connecting 34 – LIGHTING effect
16 Optional Equipment Connection 35 Setting the Clock
16 – AUX IN Connection 35 – Setting the Clock through “Music Flow
16 – USB Connection Bluetooth” App
17 – Antenna Connection 35 – Using your player as an alarm clock
36 – Sleep Timer Setting
36 – Dimmer
3 Operating 36 Auto power down
18 Basic Operations 37 – AUTO POWER On
18 – USB Operations 37 – Auto function change
19 – Selecting a folder and 38 LG Sound Sync
an MP3/WMA file 39 Wireless Party Link Connection
20 – Deleting an MP3/WMA file
20 Playback Effect
20 – DJ EFFECT
20 – SCRATCH Effect
21 – AUTO DJ
21 – DJ PRO
22 Using BLUETOOTH® wireless technology
22 – Listening to music stored on the Bluetooth
devices
24 Using the Music Flow Bluetooth App
24 – About “Music Flow Bluetooth” App
24 – Install “Music Flow Bluetooth” App onto
Your Bluetooth Device
25 – Activate Bluetooth with “Music Flow
Bluetooth” App
26 Radio Operations
26 – Listening to the radio
Table of Contents 7
4 Troubleshooting
40 Troubleshooting
40 – General
1
5 Appendix
41 General specifications
42 Maintenance
42 – Handling the Unit 2
42 Trademarks and Licenses
5
8 Getting Started
Getting Started
USB devices.
Remote control • • • • • • • • • • • • • • a• • • • • • • • • • • • • •
1 (Standby/On) : Switches the unit ON or OFF.
LIGHTING:
1 -- Turns ON/OFF the lighting effects.
-- Press and hold to turn on/off the Flash Lighting.
Getting Started
Replacement of battery
)
(R03
(R03)
• • • • • • • • • • • • • • b• • • • • • • • • • • • • • • • • • • • • • • • • • • • c• • • • • • • • • • • • • •
REPEAT : Listens to your files repeatedly or 0 to 9 numerical buttons : Selects numbered files or
randomly. preset number.
TUNING-/+ : Selects the radio stations. CLOCK : Sets a clock and checks a time.
1
C/V (Skip/Search) : ALARM : With the ALARM function you can turn
Getting Started
-- Skips Fast backward or Forward. USB play and Tuner reception on at a desired time.
-- Searches for a section within a file. • • • • • • • • • • • • • • d• • • • • • • • • • • • • •
d/M (Play/Pause) : VOICE CANCELLER : You can enjoy the function
-- Starts or pauses playback. while playing the music, by reducing singer vocal of
music in the various source.
-- Selects Stereo/Mono (Horizon mode only).
DJ EFFECT : Selects DJ EFFECT mode. (Refer to page
INFO :
20).
-- Sees information about your music. An MP3 file
RDS/SET :
often come with ID3 tag. The tag gives the Title,
Artist, Album or Time information. -- RDS (Radio Data System)
-- Sees the name of connected all Bluetooth device -- Confirms the setting.
in Bluetooth mode. KEY CHANGER ( / ) : Changes the key to suit
-- In status of Wireless Party Link Connection, device your vocal range.
name of SLAVE unit appears in the MASTER unit DJ LEVEL +/- : Adjusts the level of DJ EFFECT sound.
and Device name of MASTER unit appears in the
PTY : Searches radio stations by radio type.
SLAVE unit.
USB REC : USB direct recording.
SOUND EFFECT : Chooses sound impressions.
BASS BLAST : Selects BASS effect directly.
SLEEP : Sets the system to turn off automatically at
a specified time.
(Dimmer : The display window will be darkened by
half.)
12 Getting Started
Top panel
1
Getting Started
b n
c m
d l
k
e
f j
i
g
h
Getting Started 13
a USB i OK / RDS
You can play or record sound by connecting the - Selects a folder when searching a file.
USB device. - RDS (Radio Data System)
b USB REC / DEMO j SEARCH
- Records to USB. Moves to folder or file in selection mode. 1
- Shows Demo mode. k BLUETOOTH
Getting Started
c MIC (Microphone) VOL +/- Changes input source to the Bluetooth.
(Even in power off mode, if you press
d VOICE CANCELLER
BLUETOOTH, then power is on and automatically
VOICE CANCELLER can reduce the Vocals of
changed to Bluetooth function.)
Singer in certain source/content allowing you to
enjoy the music. l USER EQ / BASS BLAST
Press to switch this Mode On or Off. - Selects the sound effect created by your own.
- Press and hold to select BASS effect directly.
e SCRATCH / SEARCH & LEVEL CONTROL
- Turns clockwise or counterclockwise to make m KEY CHANGER ( / )
Scratch sound. Changes the key to suit your vocal range.
- Searches a folder or a file. n WIRELESS LINK
- Adjust DJ EFFECT level. Selects Wireless Party Link mode.
f DJ EFFECT
Selects DJ EFFECT mode. (For more information
refer to page 20).
g LIGHTING
- Turns ON/OFF the lighting effects.
- Press and hold to turn on/off the Flash Lighting.
h CLUB, DRUM, USER (DJ PRO)
Press and hold to select CLUB, DRUM or USER
sound effect for mix.
(If you want to use USER, you have to register a
source with “Music Flow Bluetooth” app.)
1, 2, 3 (DJ PRO PAD)
Press a desired sound pad.
14 Getting Started
j FM ANTENNA
k AUX IN (L/R)
l Power cord
l
Getting Started 15
Getting Started
installation conditions (Horizontal or Vertical). and place the unit at a safe distance from the
child’s reach.
If the installation method is changed (‘Horizontal yy Be careful that the unit should not fall down.
Vertical’ or ‘Vertical Horizontal’), it indicated by Otherwise it may result in malfunction and
‘VERTICAL MODE’ or ‘HORIZON MODE’ in the display causing personal injury and/ or property
panel. damage.
yy Watch out the foot when you lay the unit in
Horizontal horizontally.
Vertical
,,Note
On the horizon mode, press d/M on the remote
control to change the tuner from mono to
stereo.
16 Connecting
AUX IN Connection
Connect an output of auxiliary device (Camcorder, TV,
Player, etc) to the AUX IN (L/R) connector.
2 If your device has only one output for audio (mono),
connect it to the left audio jack on the unit.
Connecting
Red
Audio cable
White
,,Note
Removing the USB device from the unit :
1. Choose a different function.
2. Remove the USB device from the unit.
Antenna Connection
Connect the supplied FM antenna for listening to the
radio.
Connect the FM wire antenna to the FM antenna
connector.
FM antenna
2
Connecting
,,Note
Be sure to fully extend the FM wire antenna.
18 Operating
To Do this
Press d/M on the remote control or
Playback
T on the unit.
Press d/M on the remote control or
Pause
T on the unit during playback.
3 Press and hold C/V on the
Searching
remote control or Y/U on the
Operating
for a section
unit during playback and release it at
within a file
the point you want to listen to.
Press 0 to 9 numerical buttons on
Selecting a file
the remote control to go to the
directly
desired file directly.
By using C/V buttons :
Press V on the remote control or
U on the unit to go to the next
file.
Skipping to Playing less than 2 seconds, press
the next/ C on the remote control or Y
previous file on the unit to go to the previous file.
Playing after 3 seconds, press C
on the remote control or Y on the
unit to go to the beginning of the
file.
Press REPEAT on the remote
control repeatedly. Refer to the note
Playing for details about the display change
repeatedly or
RPT1 -> RPT*DIR -> RPT ALL ->
randomly
RANDOM -> OFF
*DIR : Directory.
Operating 19
Operating
yy If there is no file in a folder, the folder will not
appear.
yy Folders will be presented as the following
order;
ROOT FOLDER 1 FOLDER 3
FOLDER 7 FOLDER 8 FOLDER 5
FOLDER 6
yy File will be played from $ file No.1 to $ file
No.14 one by one.
yy Files and folders will be presented in order
recorded and may be presented differently
according to the record circumstances.
yy *ROOT : The first screen you can see when a
computer recognize the USB is “ROOT”.
20 Operating
If you want to exit the current mode, press yy The DJ EFFECT mode is displayed for 3
seconds when a DJ EFFECT Key is inputted.
DELETE repeatedly until “FORMAT” appears, and
then press DELETE once again. yy The current gage level is displayed when
adjusting gage.
2. To delete file/folder or format, press and hold
DELETE. yy If the function changed or the unit is turned
off and on, DJ EFFECT mode with DJ EFFECT
>>Caution is turned off.
yy Do not extract the USB device during
operation. (play, delete, etc.)
yy Regular back up is recommended to prevent SCRATCH Effect
data loss.
You can output and mix the sound effects of the
yy The delete function may not be supported SCRATCH.
according to the USB status. (lock, etc.)
Rotating SCRATCH / SEARCH & LEVEL CONTROL
to mix the scratch sound.
-- You can hear effect of scratch sound depending
on the direction in which you rotate SCRATCH /
SEARCH & LEVEL CONTROL.
Operating 21
AUTO DJ DJ PRO
Auto DJ blends the end of one song into the It allows you to mix CLUB, DRUM or USER sound
beginning of another for seamless playback. It effect. Each mode has up to 3 sounds effect.
equalizes volume across files for uninterrupted 1. Press and hold DJ PRO (CLUB, DRUM or USER)
playback. to select a desired DJ PRO sound effect.
Press AUTO DJ on the remote control repeatedly, the 2. Press a DJ Pro. Pad (1, 2, 3) of desired sound.
display changes as followings.
AUTO DJ RANDOM -> AUTO DJ SEQUENTIAL -> ,,Note
AUTO DJ OFF yy If you want to use USER, you have to register
a source with “Music Flow Bluetooth” app. If
Display the source is not register to USER, “EMPTY”
Mode Description or “NO SOUND” appears on the display
Window
window.
OFF AUTO DJ OFF -
yy Initial DJ Pro mode is CLUB sound effect.
yy DJ Pro mode is displayed for 3 seconds when 3
The music is played
AUTO DJ you press DJ PRO (CLUB, DRUM or USER).
RANDOM randomly on this
Operating
RANDOM
mode. yy The DJ PRO sound is mixed when you press a
DJ Pro. Pad (1, 2, 3).
The music is played yy The currently playing DJ PRO sound is
AUTO DJ
REPEAT repeatedly on this stopped and the selected DJ PRO sound
SEQUENTIAL
mode. outputs if you press a different DJ Pro. Pad
(1, 2, 3) while DJ PRO sound is playing.
,,Note
yy AUTO DJ mode does not support searching
for a section within a file or to play repeatedly
or randomly.
yy If you move to other functions on AUTO DJ
mode, JUKE BOX mode, Delete mode or AUTO
DJ will be disable.
yy AUTO DJ is not supported in the music file
whose length is less than 60 seconds.
yy Only AUTO DJ SEQUENTIAL is selected when
played JUKE BOX list.
22 Operating
Bluetooth is wireless communication technology for yy Depending on the Bluetooth device type,
short range connection. some devices may have a different pairing
process. Enter the PIN code (0000) as
The sound may be interrupted when the connection needed.
interfered by the other electronic wave or you
connect the Bluetooth in the other rooms. yy You can connect this unit with up to 3
Bluetooth devices simultaneously using the
Connecting individual devices under Bluetooth same method as described above, only in the
wireless technology does not incur any charges. A Bluetooth function.
mobile phone with Bluetooth wireless technology
yy The multi pairing connection is only supported
3 can be operated via the Cascade if the connection
on Android or iOS devices. (Multi pairing
was made via Bluetooth wireless technology.
connection may not be supported depending
Operating
,,Note ,,Note
yy When using Bluetooth technology, you have yy When this unit connected with multiple
to make a connection between the unit and Bluetooth devices, only one device which
the Bluetooth device as close as possible and you are playing keeps Bluetooth connection
keep the distance. when you change the function to the others.
However, it may not work well in certain yy The sound may be interrupted when the
situations as described below : connection has interference from other
-- There is a obstacle between the unit and electronic devices.
the Bluetooth device. yy You may not control the Bluetooth device
-- There is a device using same frequency with this unit.
with Bluetooth technology such as a yy Depending on the type of the device, you may
medical equipment, a microwave or a not be able to use the Bluetooth function.
wireless LAN device.
yy You can enjoy wireless system using phone,
yy You should connect your Bluetooth device to MP3, Notebook, etc.
this unit again when you restart it.
yy The more distance between the unit and the 3
yy Even if this unit connected up to 3 Bluetooth Bluetooth device, the lower the sound quality
Operating
devices in the Bluetooth mode, you can play becomes.
and control music by using only one of the
yy Bluetooth connection will be disconnected
connected devices.
when the unit is turned off or the Bluetooth
device gets far from the unit.
yy When Bluetooth connection is disconnected,
Controls connected Bluetooth device connect the Bluetooth device to the unit
You can control connected Bluetooth device by the again.
unit; play, pause, skip.
yy When a Bluetooth device is not connected,
,,Note “BT READY” appears on the display window.
yy Only Android OS and iOS is available to use yy When you use the BT function, adjust the
this function. volume to a proper level on the Bluetooth
yy This function may not be supported device.
depending on the Bluetooth device, or yy If it is not in the BT function, only one device
operated differently. can be connected.
yy If a Bluetooth device is connected when
using LG TV, LG TV is disconnected and the
Bluetooth device is connected.
yy When you connect Bluetooth device (iOS
device etc.) to this unit or operate the device,
the volume level can be synchronized with
each other.
24 Operating
To enjoy more features, you are recommended to 2. In the search bar, type in the “Music Flow
download and install free “Music Flow Bluetooth” Bluetooth” and search it.
app. 3. In the search result list, find and tap “Music Flow
Here is introduce a few of the many features of Bluetooth” to start downloading Bluetooth app.
“Music Flow Bluetooth” app. 4. Tap an icon for installation.
Multi Juke box : Your entertainment increases three 5. Tap an icon for downloading.
fold when you connect up to 3 Bluetooth phones at
the same time. Play music from all three phone and ,,Note
create a customized playlist from all the phones. yy Make sure that your Bluetooth device is
connected to the Internet.
Sampler Creator : Record effects on your
smartphone and very simply sync them via yy Make sure that your Bluetooth device is
Bluetooth to the system. Be as creative as you can equipped with “Google Android Market
be. (Google Play Store)”.
,,Note
yy “Music Flow Bluetooth” app will be available
in the software version as follow; 3
-- Android O/S : Ver 4.0.3 (or later)
Operating
yy If you use “Music Flow Bluetooth” app for
operation, there would be some differences
between “Music Flow Bluetooth” app and
the supplied remote control. Use the supplied
remote control as necessary.
yy Depending on the Bluetooth device, “Music
Flow Bluetooth” app may not work.
yy After connection of “Music Flow Bluetooth”
app, music may be output from your device. In
this case, try connecting procedure again.
yy If you operate the other applications or
change the settings on your Bluetooth
device while using “Music Flow Bluetooth”
app, “Music Flow Bluetooth” app may operate
abnormally.
yy When “Music Flow Bluetooth” app operates
abnormally, check your Bluetooth device and
the connection of “Music Flow Bluetooth” app
and then try to connect again.
yy Depending on the smart phone's operating
system, you have some differences for “Music
Flow Bluetooth” operation.
yy Check Bluetooth setting on your Bluetooth
device if “Music Flow Bluetooth” app
connection does not work well.
26 Operating
Operating
RT (Radio Text)
A text message contains special
information from the broadcast station.
This text may scroll across the display.
On Display Description
Reinforces the treble,
BASS (BASS BLAST) bass and surround
3 sound effect.
Operating
,,Note
yy By pressing and holding
USER EQ / BASS BLAST for 3 seconds on
the unit you can directly select BASS (BASS
BLAST) effect.
yy By pressing BASS BLAST on the remote
control, you can directly select BASS (BASS
BLAST) effect.
Operating 29
Operating
Respect copyrights
During recording, press T on the unit or d/M on
the remote control to pause recording. Press it again
to restart recording.
30 Operating
,,Note
yy Do not remove the USB device or turn off
the unit during USB recording. If does not, an
incomplete file may be made and not deleted
on PC.
yy If USB recording does not work, the message
like “NO USB”, “ERROR”, “USB FULL”, “NOT
SUPPORT” or “FILE MAX” is displayed on the
display window.
yy Multi card reader device or External HDD can
not be used for USB recording.
yy A file is recorded by about 512 Mbyte when
you record for a long term.
yy You can record various sound using DJ
3 EFFECT, SCRATCH, DJ PRO or MIC.
yy You can control recorded MIC sound according
Operating
to MIC volume.
yy You may not store more than 2000 files.
yy It’ll be stored as follows.
AUX Tuner
Operating
PRESET·FOLDER W/S on the remote control Deleting JUKE BOX list
to select the JUKE BOX program number.) Deleting function only works in the edit mode.
5. Press JUKE BOX / MEMORY once again. 1. Press and hold JUKE BOX / MEMORY on the
To play the JUKE BOX list, press d/M after you make remote control to enter the edit mode.
the list. 2. Select a song by pressing PRESET·FOLDER W/S
you can display the information by pressing INFO. the MIC VOL.
yy If sound through the microphone is extremely
loud, it may be distorted. In this case, press
DEMO MIC VOL to minimum.
In the power off state, press USB REC / DEMO on
yy If your microphone’s sound feels not loud
the unit once. The unit will power on and display the
though MIC VOL is max, you can adjust only
each of functions with demo sound in the display
audio source volume lower.
window. To cancel the DEMO function, press
USB REC / DEMO once more. -- Follow below step.
1. Press and hold VOICE CANCELLER on
,,Note the unit.
yy While in DEMO, this unit will keep DEMO 2. Reduce Audio Source Volume by
status even if you unplug the power cord rotating SCRATCH / SEARCH & LEVEL
connection. CONTROL counter-clockwise on the
unit. To initialize it, power off.
yy You can enjoy other functions during the
DEMO, the DEMO will temporarily pause.
- Without input key in 10 sec, the DEMO will
play back automatically.
Operating 33
Operating
yy This function may not be initialized depending
yy This function is available to use only when a on the status of connected devices.
microphone is connected.
yy If a microphone is not connected, “NOT
SUPPORT” appears in the display window.
yy It is not available on the MONO source.
yy To initialize it, change the Function or
disconnect the microphone.
yy This function may not be initialized depending
on the status of connected devices.
34 Operating
LIGHTING effect
This function offers a party atmosphere by operating
the lighting on the unit.
Press LIGHTING on the remote control or on the
unit.
RHYTHM PARTY FIREWORK SPACE
WATER FOREST CITYGLOW (MYSTYLE)
OFF
,,Note
yy If you want to enjoy the dynamic lighting
effect, select the RHYTHM or the PARTY.
yy Lighting function is available in all functions.
3 yy Lighting mode retains its previous mode
when you first press LIGHTING, press again
Operating
to change modes.
yy If you want to use MYSTYLE, you have to
register a source with “Music Flow Bluetooth”
app.
yy On the lighting mode, you can select the
mode by using SCRATCH / SEARCH &
LEVEL CONTROL.
yy Press and hold LIGHTING button to turn on/
off the Flash Lighting.
Operating 35
Operating
,,Note
yy If you set the clock time, you can check the
Setting the Clock through time by pressing CLOCK even when the
“Music Flow Bluetooth” App player is turned off.
Install “Music Flow Bluetooth” app on your Android yy You can set alarm after you set the clock
device. (Refer to page 24) time.
Your unit’s clock will be automatically synchronized yy If you set the clock time and alarm, you
with your device by activating Bluetooth connection can check the alarm setting information
through “Music Flow Bluetooth” app. by pressing ALARM even when the unit is
turned off.
yy You can select ALARM ON/OFF mode by
pressing ALARM.
36 Operating
device.
Dimmer
Turn off the unit by pressing the power button for
Press SLEEP on the remote control once. The display
more than 5 seconds.
window will be darkened by half.
To cancel it, press SLEEP on the remote control
repeatedly until dim off.
,,Note
All the LED turns off when Dimmer is being
operated.
Operating 37
Operating
recommended to disconnect the connection
before turning off the unit. yy This function is not available during recording
yy If you try to connect to the “Music Flow or deleting.
Bluetooth” app, Bluetooth function of this yy This function only works with devices that
unit is turned on. were previously connected.
yy If you turn on the unit using LG TV or
Bluetooth function, proper function of this
unit is turned on.
yy If you have already paired with this unit,
automatically this unit can turn on by an input
source when this unit is turned off.
yy If you turn off the unit by pressing the power
button for more than 5 seconds, Auto Power
On function is disabled. To activate it, turn on
the unit.
38 Operating
Operating
yy MASTER unit and SLAVE unit may be
different depending on playback status,
source or setting.
yy Check the following information when
connecting to Bluetooth.
-- You can connect only one Bluetooth
device in the MASTER unit. You cannot
connect Bluetooth device to the SLAVE
unit.
1. Press WIRELESS LINK on the unit. PARTY LINK -- Wireless Party Link connection is only
MODE SELECT appears in the display window. supported on Android or iOS devices.
(Wireless Party Link connection may
2. Rotate SCRATCH / SEARCH & LEVEL not be supported depending on the
CONTROL on the unit or press Y/U on the connected device specifications or OS.)
unit to select MASTER or SLAVE. -- Removable/detachable Bluetooth devices
- unit : Selects MASTER. (ex. Dongle etc.) will not support Wireless
- unit : Selects SLAVE. Party Link connection.
Two units try to connect with each other. -- When Wireless Party Link is connected,
Bluetooth connection is not available in
3. When this unit is successfully connected each status of recording or deleting.
other, “Slave Device Name CONNECTED” appears
in the MASTER unit. “CONNECTED TO Master
Device Name” appears in the SLAVE unit and
change to SLAVE soon.
40 Troubleshooting
Troubleshooting
General
yy The power cord is not plugged in. Plug in the power cord.
No Power. yy Check whether electricity failed.
Check the condition by operating other electronic devices.
General specifications
General
Power requirements Refer to the main label on the unit.
Refer to the main label on the unit.
Power consumption Networked standby : 0.5 W
(If all network ports are activated.)
Dimensions (W x H x D) Approx. 818 mm x 318 mm x 388 mm
Net Weight Approx. 17.2 kg
Operating temperature 5 °C to 35 °C (41 °F to 95 °F)
Operating humidity 60 %
Inputs
Analog audio in (AUX IN) 1.2 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R)
Microphone (MIC 1/2) Sensitivity 15 mV (1 kHz), 6.3 mm jack x 2
Tuner
FM Tuning Range 87.5 to 108.0 MHz or 87.50 to 108.00 MHz
5
System
Appendix
Frequency Response 80 to 20,000 Hz
Signal-to-noise ratio More than 75 dB
Dynamic range More than 80 dB
Bus Power Supply (USB) 5V01A