Professional Documents
Culture Documents
Technical Bulletin LXL: No. Subject Release Date
Technical Bulletin LXL: No. Subject Release Date
11/11/2019
TECHNICAL BULLETIN LXL
No. Subject Release
Date
2210036 Unreleased
2210037 Unreleased
2210038 rev 2 Functional Optimization Solid Waste Drawer 26/10/2011
Waste container: CPC connector fixed with nut, aerosol filter
2210039 rev 2 removed 26/10/2011
2210040 Rack for pipettor OVL probe with stainless steel shaft 22/06/2011
2210041 Software Change to Version 3.1.4.20 SP3 15/06/2011
2210042 Reagent module: Fin coating to keep specified Integral push-in 22/06/2011
and pull-out forces
2210043 Unreleased
2210044 rev 2 Cabinet Drawers 03/02/2012
2210045 rev 2 Direct Drain 10/12/2012
2210046 rev 2 Liaison XL label requirements 26/10/2011
2210047 Unreleased
2210048 rev 2 Software version 3.1.5.5. SP1 26/10/2011
2210049 rev 2 Change in 12 month PM kit 26/10/2011
2210050 rev 2 Cable tie to fix spiral cable liquid waste 26/10/2011
2210051 rev 2 Pipettor: glued gear wheel changed to injection molded version 26/10/2011
2210052 rev 1 Power supply liquid protection 20/12/2011
Improvement of the sorter outlet channel and cuvette loading to
2210053 rev 2 the incubator 28/03/2012
2210054 rev 1 SRP (VP9101) – New pin for holding clamp 28/02/2012
2210055 rev 2 Software version 3.1.5.5. SP2 in Production 26/10/2011
2210056 rev 2 Improvement of the instrument’s stability with cabinet drawers 26/10/2011
2210057 rev 4 Auger Redesign 02/11/2011
2210058 No flame retardant material in top cover 23/01/2012
2210059 rev 1 Labels on cabinet drawers 23/01/2012
2210060 rev 1 Washer: Glued gear wheel changed to injection molded version 28/03/2012
Reader module: Glued gear wheel changed to injection molded
2210061 rev 1 version 28/03/2012
2210062 rev 1 Blue Stained Springs in Washer 13/07/2012
2210063 rev 1 Additional Labels for waste bulk 23/01/2012
2210064 Unreleased
2210065 Unreleased
2210066 rev 1 Waste drawer detection optimization 20/12/2011
2210067 Tubing Lenght in TA debubbler and filter 13/07/2012
2210068 Unreleased
11/11/2019
TECHNICAL BULLETIN LXL
No. Subject Release
Date
11/11/2019
TECHNICAL BULLETIN LXL
No. Subject Release
Date
11/11/2019
TECHNICAL BULLETIN LXL
No. Subject Release
Date
2210169 rev 1 Removal of instrument label from LAS Upgrade Kit 09/02/2015
2210170 Pipettor Y-Motor: Reduce length of fixing screw 16/03/2015
2210171 Adaptation of holder for 3-layer tubing in the washer 01/07/2016
Reader module: new screw for drive wheel and additional
2210172 washer 12/03/2015
2210173 Change of syringe to Kloehn 07/04/2015
2210174 Drip Shield power supply made of PP 17/04/2015
2210175 Optimization of peltier fixation 17/04/2015
2210176 Improvement of the top cover assembly adjustment 17/04/2015
2210177 Plastic material of drive wheel black colored 17/04/2015
2210178 ZSPIP Cable can collide with the support for the flat cable 17/04/2015
2210179 rev 2 Liquid handling: check valve fixation 10/07/2015
2210180 Syringe self adjustment 16/06/2015
2210181 New label on PM kit 19/05/2015
Washer “Guiding Seals”: Fit of the guiding hole to the aspiration
2210182 needle 24/07/2015
2210183 New Software 4.1.0.2 SP2 24/07/2015
2210184 Modified downholder for tip loading tray 24/07/2015
2210185 rev 1 Adding an O-Ring to the incubator wash station spare part 26/08/2015
2210186 rev 1 Functional optimization of the measurement chamber 26/08/2015
2210187 rev 1 Obsolete Fan - Reagent Module 29/09/2015
2210188 rev 1 Tube fitting geometry change 29/09/2015
2210189 rev 1 Service access door cabinet 12/11/2015
2210190 rev 1 LAS Cabinet swivel foot accessibility 16/11/2015
2210191 rev 1 Improved packaging of spare parts with 3-layer tubing 04/12/2015
2210192 rev 1 Modified washer overflow in incubator 09/02/2016
2210193 rev 1 New Software 4.1.0.3 SP1 as part of a new software package 11/03/2016
2210194 rev 1 Instrument label with GS1 barcode, additional label on box 15/02/2016
2210195 rev 1 BCL 148 – new hardware version 07/07/2016
Change of raw material for tube elements (installed in Alitea
2210196 rev 1 peristaltic pumps) 21/09/2016
2210197 rev 1 Additional sealing around Peltier modules 07/07/2016
2210198 rev 1 Torx screws for the crates 12/07/2016
2210199 rev 2 PC with new modem 24/03/2017
2210200 rev 1 Teflon tape around the syringe 10/10/2016
Measurement chamber: Increased dark count level due to
2210201 rev 2 vibrations 17/10/2016
11/11/2019
TECHNICAL BULLETIN LXL
No. Subject Release
Date
11/11/2019