Professional Documents
Culture Documents
Zimo Decoder Catalog 2016 06 English
Zimo Decoder Catalog 2016 06 English
ZIMO Decoders . . .
. . . are supplemented by high-quality accessories: for example,
ZIMO exhbition booth, the decoder-wall a wide range of speakers for sound decoders. In addition to the
usual round speakers, miniature rectangular speakers with
Even today there are a number of unique features of ZIMO There are no derated "Basic decoders" in the ZIMO product specially-made bodies and resonant bass reflex speaker boxes
decoders, such as: • the "HLU" concept and ZIMO train number line. This product policy not only eliminates the waste of our provide very good sound from an extremely small space. Energy
recognition • "Swiss mapping," an alternative to NMRA function valuable labor to develop inferior products, but it's also advanta- storage electrolytic capacitors, tantalum and Gold Caps offered
mapping that links complex lighting conditions to adjust to geous to the user: the use of a decoder which exploits the latest by ZIMO (as components and modules) are particularly useful
individual desires (appropriate not only for the Swiss...) • the high technology options may not always be evident at the time of and recommended.
level of configurability of ZIMO‘s sound capabilities • "Input purchase, but can be relevant when it comes to adapting to new
A range of adapters and locomotive boards facilitate the
Mapping," which is the combined function mapping upstream of operations later, for example when new feedback options are
installation and increase the performance of our
the assignment of function keys. needed.
4
The Important Characteristics of ZIMO (Sound) Decoders
(all decoders are largely functionally identical)
ª
Basic Properties Motor Control and Regulation Functions and Function Outputs
ª DCC-addresses 1 ...10239 Composite addresses 1 ...127, ª Low-noise, high frequency PWM control, selectable 20/40 ª Full NMRA Function Mapping, with extensions (direction
MM-addresses 1 ...80, functions F0 ...F28. kHz. Alternatively, low-frequency (adjustable 30 to 150 Hz) - dependence, asymmetric lighting, etc.).
ª 14, 28, 128 external speed steps; 256 or 1024 internal. for certain older engine types. ª ”Swiss Mapping” (not only for the Swiss!), with multiple
ª Programming in "Service Mode" and "Operational Mode”; ª Suitable for all DC motors including coreless motors lighting conditions defined for cases of: locomotive without
CV-readback in “Operational Mode” with RailCom. (Faulhaber, Maxxon), "difficult cases" such as Fleischmann- train, locomotive pulling train and locomotive pushing train,
round motor, with additional diodes for field coil motors. and the key combinations to activate them.
ª DC-Analog operation, with optional unregulated or load-
ª Partial self-optimizing control, and numerous possibilities for ª ZIMO input mapping, ‘forward-connected’ to the desired
regulated motor control.
manual adjustment. key-function mappings which permits setting of the key
ª AC-Analog operation, including direction-reversal using
ª Speed steps either relative to a three-point curve or allocations as desired; especially useful for decoders in which a
Märklin-standard current-surge impulse. ready-to-use sound project has been loaded.
programmable in 28 steps.
ª SUSI-interface: included on smaller decoders on solder pads; ª Dimming, flashing, American and other lighting effects: Mars
ª Alternative km/h control (1/2, 1, or 2 km/h per speed step)
on larger decoders on connector. instead of the conventional speed step control. ditch, strobe ... Soft start, brake light, flickering...
ª Software update capability: New software versions may be ª Adjustable balance of the transmission neutral position upon Smoke special functions - heating element and fan.
loaded into the decoder with the help of the ZIMO MXULF direction reversal for the avoidance of starting jolt. ª High beam/low beam headlight switching via function key.
decoder update device (or its predecessor MXDECUP) or via ª Time-limiting of coupling control for overload protection of
ª Acceleration settings (NMRA standard) and additional
MX10 base unit (the ZIMO command station). This can be
"exponential acceleration and braking" for soft start/stop and Krois, Roco, or other digital couplers and ‘coupling-waltz’
accomplished on the track without opening the locomotive.
"adaptive acceleration and braking" to avoid sudden jolts. (automatic push and release).
Sound projects are similarly loaded.
ª Distance controlled stopping (constant stopping distance) for ª Besides the actual 2 (or 4, depending on the decoder)
Operational Safety Features precise stopping in front of a red signal by HLU or ABC. function outputs, additional "logic level" outputs are included,
ª Shunting ("Switcher") functions: half-speed, reduction or which be used as control lines for standard servo drives for
ª Overcurrent protection for motor and function outputs with couplers, pantographs and other mechanical elements.
shutdown and automatic reset. disconnection of the starting/braking times.
ª Automatic motion continuation during interruption of ª Servo configuration with special CVs for end and middle
ª Over temperature protection by automatic shutdown at
about 100° C (212° F). wheel/rail contact (dirty track, switches, etc.) until reliable
supply resumes (Assumes installation of an energy storage
ª Protection elements (suppressor diodes) against voltage device in the locomotive).
spikes from motor inductance and external sources.
ª Overvoltage protection min. 35 V, typically 50 V.
5
Train Control and Feedback ª Acceleration and load dependent sound playback; automatic Energy Storage Interface
measuring trip for ‘training’ load-sensitivity, both for steam
ª Braking distances by DC, ABC (= stopping by asymmetric ª With external energy storage (electrolytic, tantalum, Goldcap
engines and for diesel and electrical locomotives.
DCC signal), "Märklin braking distance". capacitors) continuous locomotive motion during a break in
ª Synchronization of steam ‘chuffs’ alternatively by an axle cam
ª ZIMO HLU - "signal controlled speed influence" with speed wheel/rail contact, eliminating flickering lights and sound
limits in 5 steps and stop. Only in conjunction with ZIMO detector (mechanical contact, opto-detector, Hall-effect disruption, also compensating for any loss of energy through
digital system (MX1, MX31ZL, MX10, MX32ZL as controller) sensor) or by the software-simulated axle detector. RailCom and HLU gaps.
and ZIMO track section modules (MX9, "StEin"). Adjustment options for various steam sound effects with
ª Energy storage up to 5000 µF may be connected directly
overlapping.
ª ZIMO train number message signal via high-current pulse. (without additional components) to all decoders and sound
Only in conjunction with ZIMO digital system (MX1, ª Numerous sound CVs for real-time adaptation of the loaded decoders that have a length of more than 20 mm, offering full
MX31ZL, MX10, MX32ZL as controller) and ZIMO track sound project, in particular for diesel and electric locomotives: effect without disrupting programming or train-number
section modules (MX9, "StEin"). the volume and speed (or pitch) curves for turbochargers, impulses or altering limitations defined by in-rush current.
ª RailCom, already deployed applications: "On-the-main"
thyristor and electrical motor noise, and many others.
ª Goldcaps with unlimited capacity may be connected directly
programming and CV with confirmation reading, RailCom ª Loading of sound projects (= overwrite the project already to some small decoders and to all large-scale decoders.
address feedback, feedback of the current speed. Many other loaded in the decoder) using the ZIMO decoder update
applications planned in future software releases. module MXULFA (or its predecessor MXDECUP) or the base Special Large-scale Features
unit MX10 (ZIMO command station), i.e. with the same ª Synchronous rectifier instead of diodes to reduce voltage drop
Sound Playback equipment and similar methods as for a decoder software and heat loss, offering continuous current up to 6 A without a
ª Powerful Sound Amplifier: in miniature sound decoders, 1 update. It's possible to load a sound project on the track heat sink.
Watt for 8 Ohm speaker. In H0 sound decoders, 3 Watts for 4 without opening the loco (which takes about 10 minutes), or ª One, two or three function low voltage sources (up to 1 A)
or 8 Ohm speaker (or two 8 Ohm in parallel), in large-scale alternatively via the SUSI interface (approx. 1 min). depending on decoder type: 5 V (as servo supply, also often
decoders, 10 Watts for 4 or 8 Ohm speakers (or two 8 Ohm ª Sound collection as a special form of sound project: sound used for smoke fan and lights); 10 V; and adjustable low voltage
in parallel) at 10 V. samples and parameters for several series are included. For of from 1.2 V to just below track voltage.
ª Playback rate 22 kHz (used by default) and 11 kHz (for long example, "European Steam/Diesel Collection" with 5 steam ª Up to 14 "normal" function outputs (1A total load per group of
sequences such as announcements), Flash memory 32 Mbit ‘chuff’ sets, 10 whistles, 2 bells, ... Real-time selection of the 4) depending on the decoder type; additionally, a special
available samples allows you to create an individual sound for output for a smoke fan.
(3-6 min playing time), 6 sound channels can be mixed and
played back simultaneously (e.g. steam ‘chuffs’ on two each locomotive. ª 4 servo outputs, depending on the decoder type, via
control lines, or included 3-pin connectors.
ª Acceleration sensor to automatically adjust
6 Comparison Table: Locomotive (Sound) Decoders for smaller scales
Each decoder family
includes several types
(= Different types of connection) Flat decoder Miniature Standard H0 High end H0 High power H0, 0 SOUND SOUND SOUND
Decoder Family > MX600 MX618 MX621 MX622 MX623 MX630 MX633 MX634 MX635 MX636 MX644 MX645 MX648
Dimensions mm (in.) 25 x 11 x 2 15 x 9.5 x 2.8 12 x 8.5 x 2.2 14 x 9 x 2.5 20 x 8.5 x 2.5 20 x 11 x 3.5 22 x 15 x 3.5 20.5 x 15.5 x 3.5 26 x 15 x 3.5 26 x 15 x 3.5 30 x 15 x 4 30 x 15 x 4 20 x 11 x 4
circuit board (without heat shrink tubing) (1 x .43 x .08) (.6 x .37 x .11) (.47 x .33 x .09) (.55 x .35 x .1) (.79 x .33 x .1) (.79 x .43 x .14) (.87 x .6 x .14) (.8 x .61 x .14) (1 x .6 x .14) (1 x .6 x .14) (1.2 x .6 x .16) (1.2 x .6 x .16) (.79 x .43 x .16)
Continuous Current 0,8 A 0,7 A 0,7 A 0,8 A 0,8 A 1,0 A 1,2 A 1,2 A 1,8 A 1,8 A 1,2 A 1,2 A 0,8 A
Sum of Motor and Function Outputs
Servo/Logic Out - 2 - 2 2 2 2 2 2 2 2 2 2
optional logic-level outputs on SUSI-Pins
alternatively alternatively
Function Low-Voltage - - - - - - - - 14 V, 5 V, 1,5 V 14 V, 5 V, 1,5 V only low-current:
5V / 200 mA
only low-current:
5V / 200 mA
-
0,8 total 0,8 A total
MX600
- - MX621 MX622 MX623 MX630 MX633 MX635 - - MX645 MX648
Next-Plug MX600R MX621R, -F MX622R, -F MX623R, -F MX630R, -F MX633R, -F MX635R, -F MX645R, -F MX648R, -F
Energy-storage conn. - - - - - - yes (16V) yes (25V) yes (16V) yes (16V) yes (25V) yes (16V) -
(for 16V or 25V electrolytic to 5000 µF) also Goldcap also Goldcap also Goldcap
*) The wired decoders have more function outputs than the PluX types because the PluX plug has one pin missing ("Index-pin" used as a safeguard against false insertion: "22-pin" connector actually has only 21 pins)
**) Decoders with MTC interface have depending on type some logic level function outputs: „C” versions (FA3, FA4 logic level, vs „D” FA3, FA4 normal outputs), in case of MX636 there exist also „RailCommunity”-conforming types
7
Select by type of connection, dimensions, sound or non-sound
Decoder with connectors Wired decoders
SOUND SOUND Within almost all decoder families
Next18 NEM 651 direct PluX12, PluX16 PluX22 21MTC a through-hole version is available
MX649 MX658 with or with plug on wires per
free wires (.) NEM 652 (R) NEM 651 (F)
23 x 9 x 4 25 x 10,5 x 4
(.9 x .35 x .16) (.98 x .41 x .16) MX618N18 MX621N MX623P12 MX633P22 MX634D, -C
0,7 A 0,8 A for example:
MX649 .
MX649R, -F
m m
4m m 4m
5x 4m 15 x
x 10, 11 x 30 x
- - 25 mm 20 x
x4
x9
23 4m
m
15 x
30 x
8 Comparison Table: Large Scale (Sound) Decoders
Each decoder family MX699 MX696 MX697
I
I
I
I
includes several types
(= Different types of connection)
SOUND SOUND SOUND
MX699LS MX699KS SOUND
MX696N MX696S MX696KS MX697S SOUND
Decoder Family > MX695KN SOUND MX699LV SOUND MX699KV SOUND MX696V SOUND MX696KV SOUND MX697V
Dimensions mm (in.) 50 x 40 x 13 50 x 40 x 13 50 x 40 x 13 55 x 29 x 16 55 x 29 x 16 68 x 29 x 20 60 x 32 x 21
(Length without 2 x 6 mm breakoff) (2.0 x 1.6 x .5) (2.0 x 1.6 x .5) (2.0 x 1.6 x .5) (2.2 x 1.2 x .63) (2.2 x 1.2 x .63) (2.5 x 1.2 x .7) (2.2 x 1.3 x .83)
Continuous Current 6A 6A 6A 4A 4A 4A 4A
Sum of Motor and Function Outputs
Function Outputs 14 8 15 8 15 4 8 14 8 14 10
including two headlamp outputs
Connector type 4 x 3- pins Solder pads Solder pads Solder pads Solder pads
Solder pads 4 x 3 pins
.
. .
*) the internal energy storage of the MX699 makes the MX699 run continuously for 1 ... 5 sec, reduced speed, but sound with full volume.
9
Select by type of connection, dimensions, sound or non-sound
m m
29 x 18
55 x
50 x 40 x 13
mm
Types MX699KS, MX699KV Types MX699LS, MX699LV Types MX696S, MX696V Types MX697S, MX697V
Photo: MX699KV Photo: MX699LV Photo: MX696V Photo: MX697V
D
D
SOUN
D
SOUN
SOUN
ND
SOU
m
18 m
x 29
x 1 mm
55 3 2x2
60 x
50 x 40 x 13 50 x 40 x 13
mm mm
6
10
Comparison Table: Function decoders Select by type of connection
Each decoder family Function decoders derived from loco decoders: Function decoder with connectors Wired ...
includes several types 6
(= Different types of connection) SOUND Within almost all decoder families
MX681 MX685 MX686 MX687 MX689 NEM 651 direct PluX-16, -22 21MTC
Decoder Family > a through-hole version is available
with or with plug on wires per
.
Dimensions mm (in.) 12 x 8.5 x 2.2 20 x 11 x 3.5 20.5 x 15.5 x 3.5 26 x 15 x 3.5 30 x 15 x 4 free wires (.) NEM 652 (R)
circuit board (without heat shrink tubing) (.47 x .33 x .09) (.79 x .43 x .14) (.8 x .61 x .14) (1.0 x .6 x .14) (1.2 x .6 x .16)
MX681N
Continuous Current 0,7 A 1,0 A 1,2 A 1,2 A 1,2 A
Sum of Motor and Function Outputs
Function Outputs 6 8 8 8 10
including two headlamp outputs
mm
x 2,2
8,5 examples:
Servo/Logic Out - 2 2 2 2 12 x MX685P16 MX686D
optional logic-level outputs on SUSI-Pins
MX820E
MX820V
Decoder Families > MX820 MX821
I
7 decoder models in all,
in 2 decoder families
Decoder Models> MX820E MX820D MX820V MX820X MX820Y MX820Z MX821V
Inputs 2 2 4 2 4 - 16
control circuits or location signals
MX820X
Light Output - - - 8 16 16 16
each will drive one LED/ lamp @100 mA
Servo/Logic level - - - - - - 8
output also for Multiplex Signal
MX820Y
Servo Low-Voltage - - - - - - yes
5V
H0, ... (Nicht-Sound) N, H0e, TT, ... (NO SOUND) N, H0e, TT, ... (NO SOUND) N, H0e, TT, ... (NO SOUND)
MX600P12
r
ode NEM 658
dec
Flat
directly MX618N18
on decoder MX621N MX622N
RCN-118 . NEM 651 . NEM 651
directly directly directly
on decoder on decoder on decoder
X12 8
Plu xt1
Ne
DCC + RailCom, DC-analog DCC + RailCom, DC-analog, MM DCC + RailCom, DC-analog DCC + RailCom, DC-analog, MM, AC-analog
25 x 11 x 2 mm 15 x 9,5 x 2,8 mm 12 x 8,5 x 2,2 mm 14 x 9 x 2,5 mm
0,8 A motor, total (peak 1,5 A)
0,7 A motor, total (peak 1,5 A) 0,7 A motor, total (peak 1,5 A) 0,7 A motor, total (peak 1,5 A)
4 function outputs
4 function outputs 4 function outputs 4 function outputs
The new budget-priced 4 logic level outputs for more 2 logic level outputs for more
decoder, with full feature set functions, servo control line or SUSI functions, servo control line or SUSI
MX621
iat ur wires only lity
Su bmin nctio
na
MX621R l l f u MX622
MX600 No version with wires available NEM 652 ith fu wires only
on wires u re w
iniat
wires only
M MX622R
MX621F NEM 652
NEM 651 on wires
MX600R on wires
MX622F
NEM 652 NEM 651
on wires on wires
RailCom ist ein Markenzeichen der Lenz Elektronik GmbH RailCom ist ein Markenzeichen der Lenz Elektronik GmbH RailCom ist ein Markenzeichen der Lenz Elektronik GmbH RailCom ist ein Markenzeichen der Lenz Elektronik GmbH
MX623 TT, H0, ... (NO SOUND)
MX630 H0, 0m, ... (NO SOUND)
MX633 H0, 0m, ... (NO SOUND)
MX634 H0, 0m, ... (NO SOUND)
13
MX633P22 MX634D
. NEM 658 .MTC directly
directly on decoder
MX623P12 MX630P16 on decoder
. NEM 658 . NEM 658
directly directly
on decoder on decoder
22
PluX
12 PluX 21M
TC
16
PluX
DCC + RailCom, DC-analog, MM, AC-analog DCC + RailCom, DC-analog, MM, AC-analog
DCC + RailCom, DC-analog, MM, AC-analog DCC + RailCom, DC-analog, MM, AC-analog 22 x 15 x 3,5 mm 20,5 x 15,5 x 3,5 mm
20 x 8,5 x 2,5 mm 20 x 11 x 3,5 mm 1,2 A motor, total (peak 2,5 A) 1,2 A motor, total (peak 2,5 A)
0,8 A motor, total (peak 2,5 A) 1,0 A motor, total (peak 2,5 A) 10 function outputs 6 function outputs
(„only“ 9 function outputs on PluX-22 available) (2 of them - FA3, FA4 - switchable to logic level)
4 function outputs 6 function outputs 2 logic level outputs for more 2 logic level outputs for more
2 logic level outputs for more functions, servo 2 logic level outputs for more functions, servo control line or SUSI functions, servo control line or SUSI
control line or SUSI functions, servo control line or SUSI direct connection for external energy storage direct connection for external energy storage
MX630 uts MX623 MX623
MX623 r outp
wires only tselle wires only nctio
n wires only wires only
Th e b es 10 fu
MX623R MX630R
NEM 652 NEM 652
on wires on wires
MX623R MX623R
MX623F MX630F NEM 652 NEM 652
Sample capacitor
Sample capacitor
NEM 651 NEM 651 on wires on wires
on wires )
64KB
enclosed
enclosed
on wires B )
64 K MX623F ory ( es MX623F
e mory ( es NEM 651 m e m
tur NEM 651
m
more ture fea
tu r on wires more ture fea on wires
u
for f
u for f
RailCom ist ein Markenzeichen der Lenz Elektronik GmbH RailCom ist ein Markenzeichen der Lenz Elektronik GmbH
RailCom ist ein Markenzeichen der Lenz Elektronik GmbH RailCom ist ein Markenzeichen der Lenz Elektronik GmbH
MX632 MX635 MX636 MX644
14
phased-out type, H0, 0m, 0, ... (NO SOUND) H0, 0m, 0, ... (NO SOUND H0, (0) ... (SOUND)
replaced by ´
MX635, MX636 MX644D
MX632D MX635P22 MX636D .MTC directly
on decoder
.MTC directly .NEM 658 MX636C
on decoder directly
noch kein Foto on decoder still no photo MTC directly MX644C
MX632C dieses Decoders on decoder .MTC directly
.MTC directly CAD Layout on decoder
on decoder (no photo)
TC TC
21M X22 TC 21M
Plu MX635VP, MX632WP 21M MX636VD, MX636WD
DCC + RailCom, DC-analog, MM, AC-analog variantions with low voltage 1,5 V resp. 5 V mit Niederspannung 1,5 V bzw. 5 V
DCC + RailCom, DC-analog, MM, AC-analog
28 x 15,5 x 3,5 mm DCC + RailCom, DC-analog, MM, AC-analog DCC + RailCom, DC-analog, MM, AC-analog 30 x 15 x 4 mm
1,6 A motor, total (peak 2,5 A) 26 x 15 x 3,5 mm 26 x 15 x 3,5 mm 1,2 A motor, total (peak 2,5 A)
8 function outputs 1,8 A motor, total (peak 2,5 A) 1,8 A motor, total (peak 2,5 A) 8 function outputs
(2 of them - FA3, FA4 - at C-type as logic levels) 10 function outputs 8 function outputs (2 of them - FA3, FA4 - at C-type as logic level)
2 logic level outputs for more 2 logic level outputs for more 2 logic level outputs for more 2 logic level outputs for more functions,
functions, servo control line or SUSI functions, servo control line or SUSI functions, servo control line or SUSI servo control line or SUSI
direct connection for external energy storage direct connection for external energy storage direct connection for external energy storage function low voltage 5 V (200 mA)
(also allowed goldcap modules with more than 5000 µF) (also allowed goldcap modules with more than 5000 µF)
direct connection for external energy storage
MX623 CAD Layout
3 Watts audio, 4 - 8 Ohm, 32 Mbit, 6 channels
wires only (no photo) MX635
wires only
noch kein Foto .
NEM 652 ,
Sample capacitor
.
on wires
MX623F MX635V, MX632W
enclosed
enclosed
RailCom ist ein Markenzeichen der Lenz Elektronik GmbH RailCom ist ein Markenzeichen der Lenz Elektronik GmbH RailCom ist ein Markenzeichen der Lenz Elektronik GmbH RailCom ist ein Markenzeichen der Lenz Elektronik GmbH
MX645 MX648 MX649 MX658
15
H0, (0) ... (SOUND) N, TT, H0e, H0, ... (SOUND) N, TT, H0e, H0, ... (SOUND) N, H0e, TT, ... (SOUND)
MX645P16 er
.NEM 658 de cod er
directly o und de cod MX649N
re s und
iatu
on decoder
so .NEM 651
Min iatu
re directly
MX645P22 Min on decoder
.NEM 658
directly MX649L MX658N18
MX648P16
t18
on decoder .NEM 651,
2
16, 2 X16 .NEM 658 - curved -
Nex
. RCN-118 (NEM 662)
PluX Plu directly
on decoder
directly
on decodere
directly on decoder
DCC + RailCom, DC-analog, MM, AC-analog DCC + RailCom, DC-analog, MM, AC-analog DCC + RailCom, DC-analog, MM, AC-analog DCC + RailCom, DC-analog, MM, AC-analog
30 x 15 x 4 mm 20 x 11 x 4 mm 23 x 9 x 4 mm 25 x 10,5 x 4 mm
1,2 A Motor, total (Peak 2,5 A) 0,8 A motor, total (peak 1,5 A) 0,7 A motor, total (peak 1,5 A) 0,8 A motor, total (peak 1,5 A)
10 funktion outputs 6 function outputs 4 function outputs 4 function outputs
(„only“ 4 function outputs on PluX-16 available) 2 logic level outputs for more functions, 2 logic level outputs for more functions,
2 logic level outputs for more functions,
2 logic level outputs for more functions, servo control line or SUSI servo control line or SUSI
servo control line or SUSI
servo control line or SUSI 1 Watt audio, 8 Ohm, 32 Mbit, 6 channels 1 Watt audio, 8 Ohm, 32 Mbit, 6 channels
function low voltage 5 V (200 mA)
1 Watt audio, 8 Ohm, 32 Mbit, 6 channels
direct connection for external energy storage
3 Watts audio, 4 - 8 Ohm, 32 Mbit, 6 channels MX649
r wires only
code r
sou nd de MX648 code
MX645 ture wires only sou nd de MX649R
Minia ia ture NEM 652
Sample capacitor enclosed
RailCom ist ein Markenzeichen der Lenz Elektronik GmbH RailCom ist ein Markenzeichen der Lenz Elektronik GmbH RailCom ist ein Markenzeichen der Lenz Elektronik GmbH RailCom ist ein Markenzeichen der Lenz Elektronik GmbH
Adapter Boards
16
16 TC
PluX TC 21M
21M
DCC + RailCom, DC-analog, MM DCC + RailCom, DC-analog, MM, AC-analog DCC + RailCom, DC-analog, MM, AC-analog DCC + RailCom, DC-analog, MM, AC-analog
12 x 8,5 x 2,2 mm 20 x 11 x 3,5 mm 20,5 x 15,5 x 3,5 mm 28 x 15,5 x 3,5 mm
0,7 A total current 1,0 A total current 1,2 A total current 1,2 A total current
6 function outputs 8 function outputs 8 function outputs 8 function outputs
2 logic level outputs for more 2 logic level outputs for more 2 logic level outputs for more
functions, servo control line or SUSI functions, servo control line or SUSI functions, servo control line or SUSI
direct connection for external energy storage direct connection for external energy storage
MX687W
only wires
MX687V, MX687W
variations with low voltage 1,5 V respectively 5 V
RailCom ist ein Markenzeichen der Lenz Elektronik GmbH RailCom ist ein Markenzeichen der Lenz Elektronik GmbH RailCom ist ein Markenzeichen der Lenz Elektronik GmbH RailCom ist ein Markenzeichen der Lenz Elektronik GmbH
MX688 MX689
19
MX688N18
. RCN-118 (NEM 662)
directly
on decoder Customized loco decoder for Roco N-Spur Taurus
ext18 MX689P22
N
22 .NEM 658(22 pin)
PluX directly on decoder
>220 uF
20 V
The SUSI outputs can alternatively
be used as servo outputs:
MX645 wires only Top Side + - MX645P22 Top Side (with PluX22)
Programming pads, Function output FO3 + - Programming pads, The SUSI outputs can alternatively
do not touch ! Switch input
SUSI Data (Servo 2) SUSI Clock (Servo 1)
Cap. do not touch ! be used as servo outputs:
orange
Motor right Cap. Capacitor positive Ground
White gray
Front headlight Motor left Motor right Front headlight
blue red
Common power (+)
black
Right rail pos. Motor left Common positive (+)
Right rail --- (Index)
yellow Left rail Left rail Rear headlight
green Rear headlight
purple
purple
Speaker Function output FO1 Speaker
Speaker brown Function output FO1 Function output FO2 Speaker
Function output FO2
Function output FO5 FO4
Function output FO 4 Function output FO7 FO6
Function output FO 5
Function output FO 6 Function output FO8
Function output FO 7
21
MX658N18 MX622, MX622R, MX622F MX620N or MX622N (with 6-pin plug on board)
Plug Side (Next 18) Connection Side Controller Side
(= where the wires are soldered to !) Wires (this is also the correct installation position !)
SUSI (Data) or FO4 + Positive Function output FO1 Rail (red) Left rail
GROUND GROUND Positive for “SUSI” or capacitor Right rail
“SUSI” CLOCK or FO3
Rail (black)
+ Positive SUSI (Clock) or FO3 Lfor (white) Motor left
Speaker Fu-Output FO1 “SUSI” DATA or FO4
Rear headlight Lr Motor right GROUND Lrev (yellow) Motor right
Right rail Right rail Programming pads,
Note FO3, FO4: do not touch !
are logic level Fu-Outputs
on the SUSI pins, when
CV #124, Bit 7 = 1
>220 uF
FO3 and FO4 on the MX644C are logic level Capacitor as back-up power.
Attention:
35 V
outputs, but ”normal” outputs on the (If not mounted on loco board and connected via plug)
MX644D. There are engines
where the decoder
(Is the same
- + as common must be plugged in
MX644D, C Top View (with 21-pin „MTC“ connector)
positive)
MX644D, C Bottom View normal (with the side
CAP.
Pos. top up) while on others
+ 5 V (200 mA) GROUND it must be inserted
Blue upside down.
Function output FO3 Speaker
MX644
MX695KN
Large scale decoder (NO SOUND) with screw terminals
MX699KS
Large scale decoder (SOUND) with screw terminals
MX699KV Large scale decoder (SOUND) with screw terminals
DCC + RailCom, DC-analog, MM, AC-analog DCC + RailCom, DC-analog, MM, AC-analog DCC + RailCom, DC-analog, MM, AC-analog
50 x 40 x 13 mm (without break-off plates) 50 x 40 x 13 mm (without break-off plates) 50 x 40 x 13 mm (without break-off plates)
6 A motor, total (peak 10 A) 6 A motor, total (peak 10 A) 6 A motor, total (peak 10 A)
14 function outputs 8 function outputs 15 function outputs
1 smoke fan connector 2 smoke fan outputs 2 smoke fan outputs
4 gate Inputs 4 gate Inputs
3 gate inputs
4 complete servo control outputs (control line, minus, 5 V)
4 complete servo outputs (control line, minus, 5 V) 4 complete servo control outputs (control line, minus, 5 V)
3 function low voltages
3 function low voltages 2 function low voltages (5 V, 10 V) (5 V, 10 V, code switch adjustable 1,5 - 6,5 - 14 - 19 V)
(5 V, 10 V, variable: 1,5 V to track voltage) SUSI (with 4 pin plug) SUSI (with 4 pin plug)
SUSI (with 4 pin plug) 3 supercaps (3F each) as internal energy storage 3 supercaps (3F each) as internal energy storage
direct connection for external energy storage direct connection for external energy storage direct connection for external energy storage
(capacitors, Goldcaps or battery-switch) (capacitors, Goldcaps or battery-switch) (capacitors, Goldcaps or battery-switch)
10 Watts audio, 4 - 8 Ohm, 32 Mbit, 6 channels 10 Watts audio, 4 - 8 Ohm, 32 Mbit, 6 channels
RailCom ist ein Markenzeichen der Lenz Elektronik GmbH RailCom ist ein Markenzeichen der Lenz Elektronik GmbH RailCom ist ein Markenzeichen der Lenz Elektronik GmbH
MX699LS, -LLS MX699LV, -LLV MX699LM
Large scale decoder (SOUND) with pin connectors Large scale decoder (SOUND) with pin connectors Large scale decoder (SOUND) for Märklin interface
23
r.
9LLV
nnecto
X699LV)
side)
in Märklin co le
ssib
LS und MX69
above board)
ove board)
n: MX699L
length 6 mm standard version (MX6
r is inserted
(= 10 mm ab
et (= 16 mm
n in
,w
as MX699LV
io
above socket
m above sock
special vers
rs
Pin connecto
length 12 m
DCC + RailCom, DC-analog, MM, AC-analog DCC + RailCom, DC-analog, MM, AC-analog DCC + RailCom, DC-analog, MM, AC-analog
50 x 40 x 13 mm (without break-off plates) 50 x 40 x 13 mm (without break-off plates) 50 x 40 x 13 mm (without break-off plates)
6 A motor, total (peak 10 A) 6 A motor, total (peak 10 A) 6 A motor, total (peak 10 A)
8 function outputs 15 function outputs 15 function outputs
2 smoke fan outputs 2 smoke fan outputs 2 smoke fan outputs
4 gate Inputs 4 gate Inputs 4 gate Inputs
4 complete servo control outputs (control line, minus, 5 V) 4 complete servo control outputs (control line, minus, 5 V) 4 complete servo control outputs (control line, minus, 5 V)
3 function low voltages 3 function low voltages
2 function low voltages (5 V, 10 V) (5 V, 10 V, code switch adjustable 1,5 - 6,5 - 14 - 19 V) (5 V, 10 V, code switch adjustable 1,5 - 6,5 - 14 - 19 V)
SUSI (with 4 pin plug) SUSI (with 4 pin plug) SUSI (with 4 pin plug)
3 supercaps (3F each) as internal energy storage 3 supercaps (3F each) as internal energy storage 3 supercaps (3F each) as internal energy storage
direct connection for external energy storage direct connection for external energy storage direct connection for external energy storage
(capacitors, Goldcaps or battery-switch) (capacitors, Goldcaps or battery-switch) (capacitors, Goldcaps or battery-switch)
10 Watts audio, 4 - 8 Ohm, 32 Mbit, 6 channels 10 Watts audio, 4 - 8 Ohm, 32 Mbit, 6 channels 10 Watts audio, 4 - 8 Ohm, 32 Mbit, 6 channels
RailCom ist ein Markenzeichen der Lenz Elektronik GmbH RailCom ist ein Markenzeichen der Lenz Elektronik GmbH RailCom ist ein Markenzeichen der Lenz Elektronik GmbH
24
DCC + RailCom, DC-analog, MM, AC-analog DCC + RailCom, DC-analog, MM, AC-Analog DCC + RailCom, DC-analog, MM, AC-Analog
55 x 29 x 16 mm (without break-off plates) 55 x 29 x 13 mm (without break-off plates) 55 x 29 x 16 mm (without break-off plates)
4 A motor, total (peak 10 A) 4 A motor, total (peak 10 A) 4 A motor, total (peak 10 A)
8 function outputs 8 function outputs 14 function outputs
1 smoke fan connector 1 smoke fan connector 1 smoke fan connector
3 gate inputs 3 gate inputs 3 gate inputs
4 servo outputs (+ 6 V low voltage total) 4 servo control outputs (5 V external needs to be provided) 4 servo outputs (4 control lines, 5 V from variable low-voltage)
2 funktion low voltages 1 funktion low voltage (10 V) 2 funktion low voltage
(6 V, 10 V) SUSI (with 4 pin plug) (10 V, variabel 1,5 V to track voltage)
SUSI (with 4 pin plug) direct connection for external energy storage SUSI (with 4 pin plug)
direct connection for external energy storage (capacitors, Goldcaps or battery-switch) direct connection for external energy storage
(capacitors, Goldcaps or battery-switch) 10 Watts audio, 4 - 8 Ohm, 32 Mbit, 6 channels (capacitors, Goldcaps or battery-switch)
10 Watts audio, 4 - 8 Ohm, 32 Mbit, 6 channels
RailCom ist ein Markenzeichen der Lenz Elektronik GmbH RailCom ist ein Markenzeichen der Lenz Elektronik GmbH RailCom ist ein Markenzeichen der Lenz Elektronik GmbH
MX697N
large scale decoder (NO SOUND) for „american interfaces”
MX697S
large scale decoder (SOUND) for„american interfaces,
usually directly to insert in Bachmann locos
MX697V
large scale decoder (SOUND) for„american interfaces,
usually directly to insert in Bachmann locos;
25
No picture available;
MX697N (Large Scale Decoder for american locos
WITHOUT SOUND) produced only on request.
DCC + RailCom, DC-analog, MM, AC-analog DCC + RailCom, DC-analog, MM, AC-analog DCC + RailCom, DC-analog, MM, AC-analog
56 x 32 x 21 mm 56 x 32 x 21 mm 56 x 32 x 21 mm
4 A motor, total (peak 10 A) 4 A motor, total (peak 10 A) 4 A motor, total (peak 10 A)
10 function outputs 10 function outputs 10 function outputs
1 smoke fan connector 1 smoke fan connector 1 smoke fan connector
3 gate inputs 3 gate inputs 3 gate inputs
4 servo control outputs (control line, minus, 5 V) 4 servo control outputs (5 V power needs to be provided externally) 4 servo control outputs (control line, minus, 5 V)
3 funktion low voltage 1 funktion low voltage (10 V) 3 funktion low voltage
(5 V, 10 V, variable 1,5 V to track voltage) SUSI (with 4 pin plug) (5 V, 10 V, variable 1,5 V to track voltage)
SUSI (with 4 pin plug) direct connection for external energy storage SUSI (with 4 pin plug)
direct connection for external energy storage (17V: capacitors, Goldcaps or battery-switch) direct connection for external energy storage
(17V: capacitors, Goldcaps or battery-switch) 10 Watts audio, 4 - 8 Ohm, 32 Mbit, 6 channels (17V: capacitors, Goldcaps or battery-switch)
10 Watts audio, 4 - 8 Ohm, 32 Mbit, 6 channels
RailCom ist ein Markenzeichen der Lenz Elektronik GmbH RailCom ist ein Markenzeichen der Lenz Elektronik GmbH RailCom ist ein Markenzeichen der Lenz Elektronik GmbH
Loco Board Loco Boards Loco Boards
26
designed for use with large scale sound decoder MX695LS designed for use with large scale decoder MX696 (all types) passend für Großbahn-Decoder MX696S
LOKPL95BV
Loco board für MX695 will be replaced
by board for MX699. two 20 pin sockets for plugging in a 64 x 26 x 6 mm 20 pin sockets fpor plugging in a 75 x 42 x 10 mm
decoder MX696 and solder pads for all LOKPL96BS
outside connections:
decoder MX696. LOKPLSHMAL
or: with two 10 pin 6BS
)
S)
PL9 L96B
screw terminals: (LOK LOKP
(Bild:
or:
LOKPL96KS
with sockets to plug in the decoder
and 34 solder pads for loco wiring KS)
PL96
62 x 40 x 10 mm (LOK
LOKPL96KV
V)
96L
KPL
(LO
combination of
Some demands can be fulfilled most easily by little
LOKPL96KV and MX696V modifications of serial products, e.g. for special energy
storage solutions or a train bus which is not fully
slim m conformant to the standard.
5KS, b
ut , but sli
a MX
69 a MX695KV
nearly nearly
placement in a
32 mm boiler
DCC + RailCom, DC-analog, MM, AC-Analog DCC + RailCom, DC-analog, MM, AC-Analog
64 x 29 x 18 mm 64 x 29 x 18 mm
4 A motor, total (peak 10 A) 4 A motor, total (peak 10 A) Märklin-LGB G scale „Allegra” (RhB ABe) after installing supercap
energy storage, speaker, and decoder MX695LS.
8 function outputs 14 function outputs (8 on clamps, 6 as pins)
1 smoke fan connector 1 smoke fan connector
1 gate input on clamp (+ 2 as solder pads) 3 gate inputs (1 on clamp, 2 as pins)
4 Servo control outputs on solder pads (5 V power needs to be 4 complete servo outputs (control line, minus, 5 V)
provided externally)
2 function low voltages
(5 V, adjustable 1,5 V to track voltage)
SUSI (with 4 pin plug)
SUSI (with 4 pin plug)
direct connection for external energy storage
direct connection for external energy storage
(capacitors, Goldcaps or battery-switch)
(capacitors, Goldcaps or battery-switch)
10 Watts audio, 4 - 8 Ohm, 32 Mbit, 6 channels
10 Watts audio, 4 - 8 Ohm, 32 Mbit, 6 channels Trainline HSB Mallet, installation of
loco board LOKPLSHMAL and inserted
Large scale Sound decoder MX696S
RailCom ist ein Markenzeichen der Lenz Elektronik GmbH RailCom ist ein Markenzeichen der Lenz Elektronik GmbH
28
Connecting decoders
MX699
MX697
29
MX820 MX820 MX820 MX820
30
30 31
E, D V X, Y Z
accessory decoder for 1 switch accessory decoder for 2 switches accessory decoder with light outputs accessory decoder with light outputs
RailCom ist ein Markenzeichen der Lenz Elektronik GmbH RailCom ist ein Markenzeichen der Lenz Elektronik GmbH RailCom ist ein Markenzeichen der Lenz Elektronik GmbH RailCom ist ein Markenzeichen der Lenz Elektronik GmbH
Connecing accessory decoders 31
MX821S MX821V
32
accessory decoder for 8 servos accessory decoder for 8 servos, 16 inputs and 16 outputs
DCC + RailCom
DCC + RailCom 105 x 50 x 12 mm
105 x 50 x 12 mm 8 complete servo outputs
(control, minus, 5 V from own voltage regulator)
8 complete servo outputs
(control, minus, 5 V from own voltage regulator) Low voltage for servo supply and
16 loads at the outputs
Low voltage for servo supply
(5 oder 6 V, 3 A)
(5 oder 6 V, 3 A)
16 inputs for forced switching or
stance contacts
16 outputs for relais or
or signal lights
RailCom ist ein Markenzeichen der Lenz Elektronik GmbH RailCom ist ein Markenzeichen der Lenz Elektronik GmbH
Connecting accessory decoders MX821 33
...
low restistance motors,
+ to compensate for energy losses due to HLU and RailCom gaps. for 2 to 4 ZIMO decoders (10 to 20 per decoder)
Many ZIMO decoders (see decoder summary and descriptions) with direct energy storage connection „16 V”
are equipped with a „direct connection for external energy stora- i.e. for MX633, MX645 and large scale decoders MX695, MX696, ...
ge”, in which case electrolytic, tantalum or Goldcap capacitors
H0 decoder can be connected without further action by the appropriate pins
with Elko or wires. For other decoders (especially miniature types) additio- GOLDSORG Goldcap-assortment (15 x 1 F, 8 x 12 mm)
nal components are needed. The following ranges of capacitors for ZIMO large scale decoders and
are available at ZIMO (alternatively, such components can be
Large scale decoder purchased on the electronics market). certain H0-decoders (series of 7 Goldcaps)
with Goldcap modul Small decoders do not have a „direct connect”, but with some i.e. for MX695, MX696, ..., MX633, possibly further enhanced types
addirionel components a energy storage (at almost no cost) is
possible.
GOLMRUND Goldcap - ready-to-use-module (board with 7 pieces, 140000 µF)
25 x 14 mm for ZIMO large scale decoders and certain H0-decoders
The following assortments and modules are i.e. for MX695, MX696, ..., MX633, possibly further enhanced types
available from ZIMO:
GOLMLANG Goldcap - ready-to-use-module (board with 7 pieces, 140000 µF)
SPEIKOMP Assortment of capacitors, inductors, diodes, resistors 60 x 8 x 14 mm for ZIMO large scale decoder and certain H0-decoders
for a ZIMO decoder i.e. for MX695, MX696, ..., MX633, possibly further enhanced types
WITHOUT direct energy storage connection,
i.e. for MX621, MX622, MX623, MX630, MX646, MX648
SUPERCAP68 Goldcap - ready-to-use-module with 6800 µF
ELKSODR Assortment of capacitors, inductors, diodes, resistors
... for 10 ZIMO decoders
WITHOUT direct energy storage connection,
27 x 15 x 5,5 mm for all ZIMO decoders with 16 V energy connection
i.e. for MX633, MX645, ...
ZIMO large scale decoders such as MX696, MX697, MX699 supply the sound
36
Sound providers
These pages show ZIMO partners who make sound
projects for ZIMO sound decoders. They are not Gabriel Meszároš (SK) Matthias Henning (D)
employed at ZIMO, selling their projects directly, but (Artol s.r.o., Slovakia) (Modellbahnwelt Henning)
are a part of ZIMO‘s human resources.
(Self introduction) My first attempt with (Self introduction) Born in the DDR
sound projects is dated to 2008, when I was (GDR - German democratic republic)
Heinz Däppen (CH) asked to prepare a sound project for steam I got my first PIKO model railway in
(Sound Design) locomotive Class 556.0 "Stoker". Then I the year 1961. In the eighties I started
started working on some other sound projects. It required to make sound and substandard film recordings from
... has started in the year 2009 to design sound locomotivs. From this early activities I could use something
study of decoder features and orienting in th options. I like
projects commercially. He together with ZIMO much later for my sound projects.
the large variability of sounds matching options and work
invented the „coded” project, where a load code
with them via settings in the decoder. It is not always easy, My special field are the locomotives from the former
has to be written to the CVs # 260 - 263 before
but hope that my aim to achieve realistic sound is fulfilled. „Deutsche Reichsbahn”, epoch III and iV. In the year 2000 I
loading the sound project itself. This is the basis
for all sound providers to get money from the I prefer working on diesel locomotive projects, whose sound started to make sound projects for other decoder manufactu-
customers using their projects. can be quite different depending on the operating mode. It rers, from the year 2010 for ZIMO sound decoders.
is always a challenge, as the best record sounds, process
Heinz Däppen also works for famous Currently (when this text is written, in the year 2015) i am
them, snip and assemble them into a final sound project.
model railway manufactures which pre- working on sound projects for the „sächsische VIIK”, the
Continue to update older sound projects as new decoders
install his sound projects in their locos. „996102" and the „VT2.09"
brings new possibilities or I have the opportunity to record
Heinz Däppen together with Matthias new sound to achieve better experience for model railroad- www.henning-modellbahn.de
Henning defined the „ZIMO Advanced ers enthusiasts. Die BR118 DR, PIKO Modell in TT
Standard” for assigning functions to Switzerland (RhB) ...)
www.artol.sk
lighting and sound effects. Now there
exists also a „ZIMO US Standard”. kl
oder bei ZIMO.
the sound portfolio of Heinz Däppen
contains Swiss and USA vehicles,
mostly narrow-gauge prototypes.
www.sound-design.white-stone.ch ... and USA (Mogul)
37
Oswald Holub
cases as results of cooperation between ZIMO and Roco sound Sound projects are made as own products ber 2015.
ZIMO
specialists, sometimes also with the help of external sound (for free download from the sound data-
providers. Most of theses sound projects are now available on Although standard gauge mainline locomotives and multiple
base) or on order of loco manufacturers.
the ZIMO sound database for frei download. units form a large part of his portfolio Paul continues to support
the needs of Industrial and Narrow Gauge modellers with a
Besides of standard locomotives there
range of custom projects.
Quang Nguyen
exist special cases, which demonstrate Beilhack
what ZIMO technology is able to do: Chetter sound projects are „preloaded” only in ZIMO decoders
rotary snow plow
e.g. turning and lowering/lifting the (a Roco model) or in ZIMO equipped UK locos, availabe from UK dealers. See
vehicle body, snow blowing, of course Sound database on ZIMO Website and contact directly the
„Advanced dealers or ZIMO‘s distributor for UK: office@philipsutton.com
everything with original sound.
38