Professional Documents
Culture Documents
Adler Catalogue Charnieres GB
Adler Catalogue Charnieres GB
05.07.19
COUVERTURE CAT-en 4-03/17:Mise en page 1 7/04/17 10:52 Page 2
PAGE-1-V GB-03-17 - copie:Mise en page 1 7/04/17 10:53 Page 1
1
PAGES 2-3-V GB-03-17:Mise en page 1 7/04/17 10:54 Page 2
2
PAGES 2-3-V GB-03-17:Mise en page 1 7/04/17 10:54 Page 3
3
PAGE 4-5 - V-GB-03/17:PAGE 4/5 7/04/17 10:55 Page 4
Shower enclosures with sliding doors Shower enclosures with hinged doors
4
PAGE 4-5 - V-GB-03/17:PAGE 4/5 7/04/17 10:55 Page 5
Corner cubicle with door on wall and Corner cubicle with door on wall and a fixed return
a fixed return less than 35cm wide more than 35cm wide, stabilized by a stiffener
Corner cubicle with door on wall, fixed in the façade, Corner cubicle with door on wall, fixed façade,
and fixed return, screw fixed on the edge and return in double section:
of the front fixing: fixed in façade less than 35cm wide fixed in façade less than 35cm wide
Corner cubicle with door on fixed return: Corner cubicle with door on fixed return:
clean construction watertight construction
Width: 25 mm
Length
Clip-in door : 23 mm
Adler VF : 62 mm
5
PAGE 6-7 -V-GB-03-17:Mise en page 1 7/04/17 10:55 Page 6
Index by family
6
PAGE 6-7 -V-GB-03-17:Mise en page 1 7/04/17 10:55 Page 7
Contents
Index by family 6/7
Index by key words 10
646
The precision butt hinge: Capsi or Reversi 12
Capsi self-closing hinges, Isodouche type 14
Capsi self-closing hinges, for glass thickness 8 16
Reversi self-closing hinges, for glass thickness 8 17
Reversi self-closing hinges, Saloon type 17
647
Minidouche and Super Venus, Year 2000 hinges 18
Minidouche self -closing hinge 18
Super Venus indexing hinge 19
648
Isodouche, Saloon, Super Venus, Venus: classic 20
Venus indexing hinges 20
Super Saloon self-closing hinges 22
Saloon self-closing hinges 22
Isodouche self-closing hinges 23
649
Adler Selection self-closing hinges: try them!! 25
R. Fattorini self-closing hinges 25
Adler Selection self-closing butt hinges 25
Adler Selection Saloon self-closing tube hinges 26
Adler Selection single-action cushioned
self-closing hinges 27
Adler Selection double-action cushioned
self-closing hinges 28
Adler Selection Queen stainless steel hinges 29
732
Adlock in stainless steel; Adler VF in aluminium 30
Adlock offset pin tube hinges 30
Tube hinges and clips for laminated glass 55.2 31
Adlock spot fixing connectors 41
740
Clip-In Door butt and tube hinges 32
503
Capsi, Adslide, Adler clips: showers, guards 34
Capsi clips: Capsi hinges but fixed! 34
Adslide: miniaturized claws for 8 mm thickness 35
Capsi clips: range of square clips 40 x 40 35
Capsi clips: design clips in stainless steel 36
504
Adler and Venus clips: shower and handrail 37
Venus clips: clean design, always original 37
505
Adler Selection clips : shower and guard 39
Adler S clips for showers, partitions, counters 39
8
PAGES 8-9-10-V-GB-03-17:Mise en page 1 7/04/17 10:56 Page 9
698
Adler and Capsi knobs for doors and gates 44
Capsi square knob 30 44
Adler knob dia.26 44
Adler knob dia.20 45
Adler knob dia.35 45
699
Clip-on or screw-fixed stiffener, for enclosures,
partitions 46
Adslide stiffener dia.25 46
Capsi stiffener, 20 square 47
Adler adjustable clip-on stiffener 48
705
Adler Selection stainless steel handles, various types 50
Square stainless steel handle 50
707
Adlock stainless steel lever handles with
or without lock 51
Adlock round stainless steel handle 51
780
Aluminium sections: wall, threshold, edge, seal 53
Aluminium sections for shower enclosures 53
Aluminium make-up section for door panels 54
Aluminium edge section: protection and seal 55
Miscellaneous flat aluminium sections 55
790
Seals and waterproofing profiles 58
The waterproofing profiles for the Epsila range 58
Range of PVC clip-on seals and waterproofing profile 59
Standard profile for an aluminium edge groove 60
805
Adler Kit seals and waterproofing profiles 61
The range of Adler seals in Adler Kit 61
Adler Kit: seal for aluminium edge 62
Adler Kit: mitring cutter for seals 62
9
PAGES 8-9-10-V-GB-03-17:Mise en page 1 7/04/17 10:56 Page 10
Page Page
10
ADLER -11 a? 32-V-GB-03-17:CATALOGUE PAROIS DE DOUCHE 12/04/17 13:04 Page 11
646 – 649
0°
The hinge opens by 90¡ on either 0°
The hinge opens by 90¡ on either
side around its natural closed
- posi side around its natural closed
- po
tion. The automatic self- sition. The
automatic self-closing
closing operates around positions operates within an angular sector
at – 45¡ and, depending on the of – 75¡ around the closed- posi
± 80°
initial position of the door, tion: it remains just as reliable a
returns it to one of the stop areas precise after 200,000 cycles. When
(approx. 5¡) around the 3 positions: opened more than 75¡, the door
–90° +90° –90°
— 90¡, 0¡ or 90¡. stays put.
Mechanism¤ patented by ADLER
0°
The hinge opens by 90¡ on either 0°
The hinge opens by 90¡ on either
side around its natural closed
- po side around its natural closed
- po
15° 15° sition. The automatic self-closing sition. The automaticclosing
self-
operates in an angular sector of – towards the stop position at 0¡
15¡ around the closed position: it operateswhatever the
closed po
-
± 90°
remains just as sition is: it remains just as relia
reliable and precise after 200,000 and precise after 200,000 cycles.
cycles. When opened more than
–90° +90° –90°
15¡, the door stays put.
Mechanism¤ patented by ADLER
SAS.
The natural closed position of the The natural closed position of the
0° 0°
±30° hinge, hinge,
designed to be ideally at 0¡, is designed to be ideally
there
0¡,- is
0
therefore 0
fore continuously adjustable over
continuously adjustable over the the full – 90¡ opening range.
–80°
full – 90¡ opening range. Around+80° Around this adjusted position, the
this adjusted position, the
- auto hinge opens on either side to the
matic door self-closing operates – 90¡ position. The automatic
–90° +90° over a range of over – 30¡ with–90°a +90° self-closing to the
position
stop at
closing accuracy of about 0.1¡ (the 0¡ operates whatever the closed
millimetre at the door end), and position is: it
acts fast (3 to 4 seconds, virtually remains just as reliable
and pre-
without
12
ADLER -11 a? 32-V-GB-03-17:CATALOGUE PAROIS DE DOUCHE 12/04/17 13:04 Page 13
646 – 649
50 (*)
13
ADLER -11 a? 32-V-GB-03-17:CATALOGUE PAROIS DE DOUCHE 12/04/17 13:04 Page 14
A complete range of self-closing hinges uniquely advantageous to use: the door) in the Isodouche version; a fully watertight mechanism. Hinges
a patented mechanism guaranteeing self-closing precision to the designed and patented by ADLER SAS, 100% manufactured in France
millimetre at the door end enabling watertight shower cubicles to be in aluminium bronze, a traditional alloy for ironmongery 2½ times stron-
installed without seals; endurance tested to 200,000 cycles; extreme ger than brass or stainless steel. Capsi registered pattern model, with
miniaturisation (57x57 mm, 2/3 the size of a visiting card!), even for external screws and customizable cover plates: particularly robust for
heavy doors of 50 to 100 kg depending on the model; great versatility, heavy use or risk of being forced beyond +/-90°; or Reversi model with
supporting glass of 6 to 12 mm, or wood up to 21 mm,...; a self-closing visible screws on the inside: a minimalist, very clean, square product
position continuously adjustable over +/- 90°; efficient self-closing over line. Various finishes.
a minimum of +/-30° (up to +/- 45° depending on the dimensions of
Gloss chromed
64600T
Brushed nickel
64601U
Gilded
64602V
14
ADLER -11 a? 32-V-GB-03-17:CATALOGUE PAROIS DE DOUCHE 12/04/17 13:04 Page 15
Chromed
64615K
Brushed nickel
64616L
Gilded
64617M
Chromed
64644R
Brushed nickel
64645S
Gilded
64646T
Brushed nickel
64648V
Gilded
64649W
Chromed
64640M
Brushed nickel
64641N
Gilded
64642P
Chromed
64670U
15
ADLER -11 a? 32-V-GB-03-17:CATALOGUE PAROIS DE DOUCHE 12/04/17 13:04 Page 16
The existing range of Capsi and Reversi hinges designed for the existing hinges and are suitable for shower cubicle doors not generally
construction of shower cubicle faces in 8 mm coated glass: assembly weighing more than 35 kg. Steel plunger and cam for sharper self-closing;
with adequate stiffness; possible use of special types of glass, for stainless steel bearing washers suitable for doors weighing well below
example lifetime antiscale treated; optimised cost. The hinges in this 50 kg; metal shims suitable for 8 mm glass. 2 models: Capsi and Reversi.
special range represent an optimum blend of the characteristics of the 3 finishes as standard: chromed, brushed stainless steel finish, gilded.
2 possible mountings: on wall shim section 25x25-33 mm, to compensate
for inability to take the dimensions to the millimetre (before tiling for
example); or at the back of a Capsi clip to form a 180° glass/glass
hinge; or on wall, on flat wall section or combined with a counterplate
Shim kit for hinge th. 6-10 x3 set of 4 to form a 90° glass/glass hinge. Efficiency that makes real luxury
accessible in the shower.
Natural cork
64666Q
Shim kit capsi for hinge th. 10 J4 Shim kit for hinge th. 8-12 x3 set of 4
Aluminium Transparent
64679D plastic
64667R
Brushed nickel
64673X
Gilded
64674Y
Chromed
64675Z
Brushed nickel
64676A
Gilded
64677B
Chromed
64689Q
Brushed nickel
64690R
Gilded
64691S
16
ADLER -11 a? 32-V-GB-03-17:CATALOGUE PAROIS DE DOUCHE 12/04/17 13:04 Page 17
Chromed
64686M
Brushed nickel
64687N
Gilded
64688P
Chromed
64692T
Brushed nickel
64693U
Gilded
64694V
Chromed
64695W
Brushed nickel
64696X
Gilded
64697Y
The advantages of the Isodouche Capsi hinge available in the Saloon Such an extensive return over a wider range is naturally weaker: so it
application: the hinge returns over an opening of +/-90° around the should be reserved for lightweight gates and doors typically weighing
self-closing position, within a limit of +/- 90° around the hinge pin. less than 35 kg. For glass 6 to 10 mm in thickness.
Chromed
64656D
Brushed nickel
64657F
17
ADLER -11 a? 32-V-GB-03-17:CATALOGUE PAROIS DE DOUCHE 12/04/17 13:04 Page 18
If the classic is a must, MINIDOUCHE is made for you! A self-closing Super Saloon, Capsi). It stops in any position except the 15° zone on
hinge with a proven mechanism (the Isodouche® one), small in size (82 either side of the 90° position: Isodouche self-closing. Very strong die
mm x 54.5) but robust in construction, it is intended for doors of 8 and cast brass. The self-closing motor is integral with the plate casting:
10 mm thickness (up to 31 kg). For larger size, increase the number of the visible connecting screws in the Isodouche have disappeared; the
hinges per door (typically 3 hinges per door), consulting the professional construction is far more robust. Supplied with cut shims.
rules, or choose different Adler models (Isodouche, Super Venus,
White brass
64753K
Chromed
64758Q
Gilded
64760S
18
ADLER -11 a? 32-V-GB-03-17:CATALOGUE PAROIS DE DOUCHE 12/04/17 13:04 Page 19
Gilded
64756N
The Super Venus hinges form the synthesis between a high end design are intended for 8 and 10mm glass. The Super Venus hinges hold the
product line (registered pattern), an innovative mechanism (ADLER SAS door securely and provide self-closing in zones close to 0°, 90° and
patent for the spring ring self-closing mechanism, without doubt the 180°. For self-closing in an exact position, we recommend also fitting
simplest on the market) and remarkable mechanical properties: design magnetic waterproofing seals (see 790). Very strong die cast brass.
load 50 kg (2 m (H) x 1 m (l) in 10mm glass), corrosion and dirt free. They
Chromed
64700B
Matt chromed
64711P
White
64703F
Gilded
64702D
Chromed
64704G
Matt chromed
64710N
White
64707K
Gilded
64706J
Pearlised
64705H
Chromed
64708L
19
ADLER -11 a? 32-V-GB-03-17:CATALOGUE PAROIS DE DOUCHE 12/04/17 13:04 Page 20
Smaller size, high end design (registered pattern) corrosion and dirt zones close to 0°, 90° and 180°. For self-closing in an exact
resistance (ADLER SAS patent) make the VENUS hinges the ideal position, we recommend also fitting magnetic waterproofing profiles
accessory for fitting to shower gates up to 25 kg, in glass of 6 mm (see 790) or forcing a halt at the door stop on a shower cubicle
(Venus 6) or 8 mm (Venus) (1.85 m (H) x 0.90 (l) in 6 mm glass). The upright. Very strong die cast brass. The “pearlised” finish corres-
VENUS hinges hold the door securely and provide self-closing in ponds to "matt chromed". The "gilded" is electroplated.
Chromed
64860A
Matt chromed
64862C
White
64863D
Gilded
64854U
Matt chromed
64882Z
White
64883A
Gilded
64856W
Pearlised
64881Y
Matt chromed
64872P
White
64873Q
Gilded
64859Z
Pearlised
64871N
20
ADLER -11 a? 32-V-GB-03-17:CATALOGUE PAROIS DE DOUCHE 12/04/17 13:04 Page 21
White
64893M
Gilded
64864F
Pearlised
64891K
White
64823L
Gilded
64879W
Pearlised
64820H
White
64868K
Gilded
64857X
Pearlised
64866H
Matt chromed
64887F
White
64888G
Gilded
64858Y
Pearlised
64886D
Matt chromed
64877U
White
64878V
Gilded
64869L
Pearlised
64876T
21
ADLER -11 a? 32-V-GB-03-17:CATALOGUE PAROIS DE DOUCHE 12/04/17 13:04 Page 22
White
64898S
Gilded
64897R
Pearlised
64896Q
Super Saloon hinges, stop at +/-90° over a 10° range and very precise An efficient solution for side hung doors in passages: possible if they
self-closing due to a high cut-off at 0° from any other position; for are fixed to a perfectly square architrave or frame. Supplied with
quite large doors, typically up to a height of 2m10, and a width of stainless steel wood screws 5 x 40 mm and cut shims.
1m00, in 10mm thickness. Maximum load 52kg for one pair of hinges.
white epoxy
64828R
Gilded
64829S
Natural polished
aluminium
64830T
SALOON A® hinges: stop at 0° and 180° (in a zone of 10°) and self- pair of hinges, standard model = 31 kg – H x l = 180 x 70 cm; or “45”
closing on 90° in any other position; SALOON SA®: self-closing in any model: 45 kg – H x l = 190 x 95 cm. Brass. Supplied with wood screws
position on 90°; for door thickness of 8 to 10 mm. Maximum load: for one 5 x 40 mm and cut shims.
Chromed
64822K
Matt chromed
64824M
Gilded
64825N
22
ADLER -11 a? 32-V-GB-03-17:CATALOGUE PAROIS DE DOUCHE 12/04/17 13:04 Page 23
Chromed
64810W
Matt chromed
64811X
Gilded
64833W
Chromed
64812Y
Matt chromed
64814A
Gilded
64832V
Matt chromed
64817D
Gilded
64847M
648 d
Self-closing hinges
SODOUCHE hinges: stop in any position except in the 15° zone on either for one pair of hinges, standard model: 31 kg (H x l: 180 x 70 cm); or
side of the 90° position; for door thickness of 8 to 10 mm, maximum load “45” model: 45 kg (H x l: 190 x 95 cm). Brass. Supplied with cut shims.
23
ADLER -11 a? 32-V-GB-03-17:CATALOGUE PAROIS DE DOUCHE 12/04/17 13:05 Page 24
Chromed
64834X
Gilded
64835Y
24
ADLER -11 a? 32-V-GB-03-17:CATALOGUE PAROIS DE DOUCHE 12/04/17 13:05 Page 25
Queen stainless steel hinges; self-closing tube hinges for doors to chilled
cabinet, display cabinets,...; stainless steel hinges with cushioned self-closing
for secure and reliable closure of pool security doors or for advantage
replacement of floor closers in interior dividing doors; standard market hinges
at a very attractive price.
An extensive range of hinges of European manufacture meeting the capacity of 40 kg/pair, suitable for the majority of shower enclosure
standards for glazed installations: a design which is now a market classic; doors. All the other models in the Renato FATTORINI range are available
the advantage of an adjustable self-closing position (Adler-Capsi on request: no self-closing angle adjustment, with half-moon offset pin...
principle); impeccably finished in the 2 standard finishes, chromed and Consult ADLER SAS. For glass of 8mm thickness.
brushed nickel (similar to brushed stainless steel). These hinges have a
Chromed
64950Y
Brushed chromed
64951Z
Standard market self-closing hinges at a very attractive price: when attractive price. In essence, the precision found in an Isodouche type
the precision and performance of a Capsi hinge would be an hinge for cubicles traditionally designed and well made joints. Capa-
unnecessary luxury, it makes sense to opt for this solution. The ADLER city of 35 kg/pair. For glass of 6 to 12 mm thickness.
SAS range offers a product that is generally available at a very
Chromed
64952A
25
ADLER -11 a? 32-V-GB-03-17:CATALOGUE PAROIS DE DOUCHE 12/04/17 13:05 Page 26
Chromed
64953B
Chromed
64954C
Self-closing tube hinges with central pin (even hinges at top and bottom that they close fully after being opened by customers, keeping them
of door) for doors to chilled cabinets, display cabinets etc. They self-close closed the rest of the time, making these sections more convenient and
at an angle de +/-30°. They are very practical for installation of providing substantial energy savings. Maximum capacity of 50 Kg/pair.
insulated cabinet doors in a chilled cabinet section of a store, ensuring For glass of 8 to 10 mm thickness.
Pivot hinge x2
Chromed
64905Z
26
ADLER -11 a? 32-V-GB-03-17:CATALOGUE PAROIS DE DOUCHE 12/04/17 13:05 Page 27
The TRIPLE ACTION closers comprise hinges and latches for glass doors hydraulically at the end of closing, preventing the fingers being trapped
and gates of innovative, patented design. They prevent any risk of and destructive shock and vibration to the hinge and latch fixings. In
malfunction (noise, vibration, premature aging) without adjustment. The any situation, the automatic closing is faultless and cushioned for any
latches designed for swimming pool glass safety barriers are magnetic: door opening from 0° to 90°. The hinge is still very compact: its clean
the bolt emerges opposite the strike plate and cannot impede the gate forms match the varied designs of the other door components: ADLOCK
when it closes. The hinges have a dual self-closing system: mechanical handles and locks etc. These hinges are suitable for fitting to store
by magnetic torsion spring for maximum holding torque at the end of fronts, interior doors, entrances, offices etc., replacing floor pivots and
return; and a system of stainless steel dampers to brake the door tube hinges. For coated glass 10 to 12 mm thickness.
27
ADLER -11 a? 32-V-GB-03-17:CATALOGUE PAROIS DE DOUCHE 12/04/17 13:05 Page 28
Double-action stainless steel hinges with cushioned self-closing: they are an The hinge operation is double action: opening with automatic return over
effective replacement for door closers and floor or lintel pivots. Sold in pairs: +/- 85° around the closed position; holding in open position of 85 to 90°.
the top hinge is the self-closer and the bottom one limits and controls the These hinges are made of stainless steel and are very resistant to corrosive
closing speed. Regulation of the speed is very easy and reliable. For wall- environments: outdoor, swimming pool etc., and have the advantage of a
glass installation, the door can weigh up to 65 kg and measure up to 2m40; durable self-closing mechanism.
for 180 degree glass-glass installation, the door weight is limited to 45 kg.
28
ADLER -11 a? 32-V-GB-03-17:CATALOGUE PAROIS DE DOUCHE 12/04/17 13:05 Page 29
Polished stainless steel hinges of German manufacture, finished to an im- the stop angle and holding in position on the stop. Shown here in 180°
peccable quality standard, with the option during installation of adjusting glass/glass versions. Design load = 45 kg. Glass thickness = 8 or 10 mm.
stainless steel
64904Y
29
ADLER -11 a? 32-V-GB-03-17:CATALOGUE PAROIS DE DOUCHE 12/04/17 13:05 Page 30
his stainless steel tube hinge range designed by Adler is the perfect system. Easily adaptable to a different door thickness (on request).
complement to the Adlock handles (see 707) for fitting to doors made Standard finish brushed stainless steel.
from 6 to 15 mm glass. Innovative, very efficient and invisible locking
Socket, top/bottom/ J2
ea. Added fixing point for tube ea.
free pivot, wide plate
Brushed Brushed
stainless steel stainless steel
73234C 73233B
30
ADLER -11 a? 32-V-GB-03-17:CATALOGUE PAROIS DE DOUCHE 12/04/17 13:05 Page 31
ube hinge, full height free pivot – ea. Tube hinge, full height ea.
height < 3m Brushed
adjustable rectangular insert Brushed
stainless steel stainless steel
73226U 73265M
With Adlock, Adler has developed an innovative patented solution (44.2), it is possible to install the system using sheets of cork laid in
which even enable uncoated laminated glass panels to be spot fixed the gap of the clip at full height, the overhang being trimmed with the
and surface mounted on a stainless steel tube (tube hinge or connector) cutter flush with the clip after tightening. Naturally, these clips,
to form a totally reliable, purely mechanical system. With the tube lift-off hinges and tube hinges are suitable for coated glass panels
hinges and clips for laminated glass 55.2, this principle is designed for (55.2 or 10 mm monolithic). The double-action lift-off and tube hinges
clipping onto the edge of glass panels: This tightening method is very are anti-finger-trap. It is possible to make up as much as 15 mm in
efficient and can be used directly metal on glass for a supremely the width of a door by controlling the area of glass in the clip. Butt and
elegant design and greater ease of installation. For thinner lamination tube hinges are adjustable to the height of the door.
Plain Plain
Wood screws Ø5x45 73270S 73249U
supplied
Tightening by 2 M screws /
torque 7N.m / play 0.10
Brushed
stainless steel
anodized
73284H
Plain
73271T
31
ADLER -11 a? 32-V-GB-03-17:CATALOGUE PAROIS DE DOUCHE 12/04/17 13:05 Page 32
Natural anodized
74000L
Natural anodized
74004Q
Brushed
stainless steel
anodized
74003P
Natural anodized
74002N
74011X
Gloss chromed
• Dift-off hinge,
74011X full height
• 2,60
• ea.
32
ADLER-33 a? 64-V-GB-03/17:CATALOGUE PAROIS DE DOUCHE 12/04/17 12:40 Page 33
503 – 505
The Adler et Adler Selection clips for screens, dividers or guards can
be used for a variety of installations: fixed shower cubicle panels,
partitions, guards or balcony parapets made of glass. In aluminium,
brass, zamak or stainless steel, with square or rounded lines, minima-
list in 20 mm sizes or large in 50x60, they match your installation per-
fectly.
ADLER-33 a? 64-V-GB-03/17:CATALOGUE PAROIS DE DOUCHE 12/04/17 12:40 Page 34
The large model Capsi clips reproduce the design of the Reversi hinges the glass panels are the same as in the Capsi hinges, which simplifies
(smooth outer face, visible screws on the inside) and their dimensions. the overall concept and makes some panels symmetrical if required (an
Used for wall fixing of the fixed shower cubicle panels and also as a clip advantage in the case of single face anti-scale treatments etc.). They
for a 180° glass-glass hinge, they provide perfect homogeneity of are available as standard versions in chromed, brushed nickel (bru-
construction for a shower enclosure to give an extremely clean and shed stainless steel finish) and gilded. For 8 mm glass as standard. For
minimalist overall design. With the same concept as the plates and a different thickness (from 6 to 12 mm), add sets of shims 64666Q,
counterplate of a Capsi hinge and also in aluminium bronze, they offer 64667R or 64679D.
the same tightening efficiency for panels up to 100 kg. The notches in
Chromed
50330H
Brushed nickel
50331J
Gilded
50332K
Chromed
50333L
Brushed nickel
50334M
Gilded
50335N
34
ADLER-33 a? 64-V-GB-03/17:CATALOGUE PAROIS DE DOUCHE 12/04/17 12:40 Page 35
Chromed
64686M
Brushed nickel
64687N
Gilded
64688P
In many situations of installation of shower panels or office partitions, the to prevent the risk of being scratched if case of contact inside a shower
only function of the clips is to prevent the glass moving perpendicular to cubicle. The claw of the clip is doubly chamfered to allow panels to be
its plane. They do not then need to be clips: a “claw” which simply blocks installed on edge without a notch, to ensure continuous pressure of the
these free movements of the glass is enough. Adler has pushed its pur- seal on the tray and absolute watertightness. This model can have an
suit of miniaturisation to the limit and offers the Adslide clip: it is aluminium, integral cam to simplify assembly of a panel - and is then notched - and
chromed or brushed stainless steel anodized, and does not even contain pressurization of its waterproofing seals in some situations of Walk-in
cork or plastic shims; it is reduced to a small 20x20 square. A straight systems or enclosures with sliding doors.
face with very clean lines for the outside; chamfered edges on the inside
pincewithout
Clip sans encoche
notch ouv.8 20x20 ope.8 20x20 PC
ea.
Chromé
Chromed
brillant
50325B
Brushed stainless
steel anodized
50326C
Chromé
Chromed
brillant
50365V
Brushed stainless
steel anodized
50366W
Chromed
50327D
Brushed stainless
steel anodized
50328F
35
ADLER-33 a? 64-V-GB-03/17:CATALOGUE PAROIS DE DOUCHE 12/04/17 12:40 Page 36
The small model Capsi clips have the Capsi screw cover. Small (40x40 by a stiffener. Supplied as standard with cork shims for glass of 6, 8 or
mm) and square, they fade to the maximum extent into the background 10 (12 mm possible on request), they can be fitted as an optional extra
of a Capsi shower enclosure. They tighten very efficiently despite the with very hard transparent plastic shims and a plain screw cover
miniaturisation and enable panels to be fixed to threshold strip if there (without the Adler logo). In aluminium bronze, gloss chromed, brushed
is a risk of these strips flipping over under the action of a door flag nickel and gilded, as standard.
fixed to the vertical of the clip, or due to transmission of these forces
Chromed
50300Z
Brushed nickel
50301A
Gilded
50302B
Chromed
50309K
Brushed nickel
50308J
Chromed
50311M
Brushed nickel
50314Q
Gilded Gilded
50315R
Brushed nickel
50304D
Gilded
50305F
36
ADLER-33 a? 64-V-GB-03/17:CATALOGUE PAROIS DE DOUCHE 12/04/17 12:40 Page 37
The stainless steel version of the Capsi clip, refined and profiled, to harmonise with the design of the Adlock and Adslide partitions. Thick-
ness: 6 to 12 mm.
Polished
stainless steel
50312N
Brushed
stainless steel
50313P
ALU
Polished
stainless steel 50374F
Brushed
stainless steel 50375G
Polished
stainless steel 50370A
Brushed
stainless steel 50369A
37
ADLER-33 a? 64-V-GB-03/17:CATALOGUE PAROIS DE DOUCHE 12/04/17 12:40 Page 38
Clips with counterplate to form screens 6 to 10 mm in thickness. In the VENUS hinge product range. Supplied with 1mm thick cork shims.
Clip with counterplate wall/gl ea.
Chromed
50401K
Matt chromed
50420F
White
50427N
Gilded
50424K
Matt chromed
50430R
White
50436X
Gilded
50435W
Chromed
50441C
Matt chromed
50442D
White
50444G
>
Gilded
50443F
Matt chromed
50438Z
≥
White
50440B
Gilded
50439A
38
ADLER-33 a? 64-V-GB-03/17:CATALOGUE PAROIS DE DOUCHE 12/04/17 12:40 Page 39
Clips with counterplate to form screens 6 to 10 mm in thickness. In the VENUS hinge product range. Supplied with 1mm thick cork shims.
Chromed
50449M
Matt chromed
50450N
White
50475Q
Gilded
50474P
For fully functional systems, when price is a major factor, Adler has selec-
ted clips which will combine harmoniously with the traditional hinges Iso-
douche, Saloon,…or Adler Selection, or will complete your guard systems. In
brass, zamak or stainless steel and meticulously finished, these components
will fit perfectly into your plans.
The smooth and very clean design of these square and very flat counterplate produce a wide variety of panel structures and fixings in a shower and
clips allows them to blend naturally with the Isodouche, Saloon and Super fixed glass connections in full and regular partitioning, display glazing,
Saloon hinges and even to combine with the Adlock tube hinge and handle counters, sneeze guards with separators etc. For a thickness of 8 to 12 mm.
models in a self-supporting partition. The 5 options make it easy to
Chromed
50500S
Matt chromed
50501T
39
ADLER-33 a? 64-V-GB-03/17:CATALOGUE PAROIS DE DOUCHE 12/04/17 12:40 Page 40
Chromed
50508A
Matt chromed
50509B
Chromed
50504W
Matt chromed
50505X
Chromed
50506Y
Matt chromed
50507Z
Chromed
50502U
Matt chromed
50503V
40
ADLER-33 a? 64-V-GB-03/17:CATALOGUE PAROIS DE DOUCHE 12/04/17 12:40 Page 41
This range of stainless steel tube connectors designed by Adler is the adjustments facilitate installation. Standard finish brushed stainless
perfect partner for the Adlock handles (see 707) for façade or partition steel, optional mirror polished finish on special order. Very clean and
assemblies in coated glass from 6 to 15 mm. Very easy adaptation to innovative design with smooth face.
a greater thickness on request. A number of very simple alignment
Brushed
stainless steel
73268Q
Brushed
stainless steel
73256B
Brushed
stainless steel
73242M
Brushed
stainless steel
73244P
41
ADLER-33 a? 64-V-GB-03/17:CATALOGUE PAROIS DE DOUCHE 12/04/17 12:40 Page 42
Brushed
stainless steel
73257C
Brushed
stainless steel
73240K
Brushed
stainless steel
73241L
Brushed
0
stainless steel
73243N
Ø 30 73258D
Ø 60 73278A
42
ADLER-33 a? 64-V-GB-03/17:CATALOGUE PAROIS DE DOUCHE 12/04/17 12:40 Page 43
698 – 699
The Capsi knobs are matched with the hinges, clips and stiffeners that design ideas in these parts make them extremely easy to install despite
comprise this range, mainly for shower enclosures. 30 mm square with their square shape. In aluminium bronze with standard finishes chro-
a groove to make them easy to hold between wet fingers. A few clever med, brushed nickel or gilded. Glass drill hole dia.12 mm.
Chromed Chromed
69800V 69810G
Gilded Gilded
69802X 69812J
Chromed
69813K
Brushed nickel
69814L
Adler push-pull knob, originally designed as a winder knob, ergonomic Adler or Epsila shower enclosures. In brass with a chromed or brushed
and discreet in shape and easy to grasp in the hand despite its small nickel finish. Glass drill hole dia.12 mm.
size. A discreet door knob solution to maintain the total transparency of
White
69907M
44
ADLER-33 a? 64-V-GB-03/17:CATALOGUE PAROIS DE DOUCHE 12/04/17 12:41 Page 45
Adler push-pull knob, designed historically for drawers, display cabinets etc. as a single or double knob. In brass with a gloss chromed or brushed nic-
Here supplied with screws and plastic seals for tightening onto a glass door kel finish. Glass drill hole dia.12 mm.
Chromed Chromed
69880H 69881J
Chromed Brass
69950J
Red Brass
69952L
Blue Brass
69954N
Yellow Brass
69955P
Knobs for doors and gates, diameter 35 mm, with 3 very useful seals In brass, chromed, matt chromed and gilded. Glass drill hole dia.12
for easy grasping in the hand. A great classic in the Adler catalogue. mm.
Chromed Chromed
69965Z 69967B
Gilded Gilded
69966A 69968C
Chromed
69969D
Matt chromed
69975L
White
69974K
45
ADLER-33 a? 64-V-GB-03/17:CATALOGUE PAROIS DE DOUCHE 12/04/17 12:41 Page 46
The Adslide stiffeners are made of stainless steel tubing, diameter 21x25 offers exceptional tearing strength; they are fully modular and can be
(thickness 2). They are very strong and are designed to stiffen between adapted to any type of end fitting (adjustable caps, washers etc.) or
fixed panels or between panel and wall, square or parallel. They can also screw-in points perpendicular to the axis of the stiffener at any point
be used as rails for Adslide suspended roller tracks and Adlock façade on its length. Standard finishes brushed stainless steel and polished
stiffeners (typically less than 2m50 in length): any combination of these stainless steel. Glass drill hole dia.14 mm for round façade fixing and
functions is also possible. These stiffeners are fixed to the glass by dia.12 mm for square façade fixing and expander.
washers dia.25 with screw covers. The construction of the stiffeners
Plain Polished
stainless steel
69840P 73237G
Brushed
stainless steel
73233B
Plaint
69841Q
Polished
stainless steel
69845U
Stück
Square expander fixing 20x20
Polished
Expander – wall ea. stainless steel
69848X
Plain Brushed
69843S stainless steel
69849Y
46
ADLER-33 a? 64-V-GB-03/17:CATALOGUE PAROIS DE DOUCHE 12/04/17 12:41 Page 47
Brushed Brushed
stainless steel stainless steel
69834H 69835J
The Capsi stiffeners are made of square stainless steel tubing 20x20 of these stiffeners provides exceptional tearing strength; they are fully
(thickness 1). They are very strong and are designed to stiffen modular and can be adapted to any type of end fitting (on wall or glass)
between fixed panels or between panel and wall, always square: no caps or screw-in points perpendicular to the axis of the stiffener at any point
available, unlike the Adslide stiffeners. These stiffeners are fixed to the on its length. Standard finishes brushed stainless steel and polished
glass with 20mm square washers with screw covers. The construction stainless steel. Glass drill hole dia.12mm for façade fixing and expander.
Polished
stainless steel
69852X
Brushed
stainless steel
69851W
kit 1m40
Square stiffener 20x20
Polished
stainless steel
69836K
Brushed
stainless steel
69837L
kit 2 m
Polished
stainless steel
69863P
Brushed
stainless steel
69864Q
47
ADLER-33 a? 64-V-GB-03/17:CATALOGUE PAROIS DE DOUCHE 12/04/17 12:41 Page 48
699
646 cb Adjustable clip-on stiffener
The Adler stiffener with adjustable clip end fittings will stiffen any type of range of parts for invisible wall fixings or through a wall plate for weaker
glass structure easily without predrilling the glass, with any angle supports, with straight or angled start (45 degrees). Parts and tubes in
between the panels to be stiffened or between panels and wall. A complete brass, with a chromed, matt chromed or gilded finish.
Chromed Chromed
69992D 69989A
Gilded Gilded
69991C
Chromed Chromed
69980R 69986X
Gilded Gilded
69982T 69988Z
Chromed
69983U
Matt chromed
69984V
Gilded
69985W
48
ADLER-33 a? 64-V-GB-03/17:CATALOGUE PAROIS DE DOUCHE 12/04/17 12:41 Page 49
705 – 707
Door handles
and locks
Handles in polished stainless steel (brushed stainless steel finish avai- diameter 10 mm. The horizontal model (500 mm c to c) can function well
lable on request), square section 20x20: half handles with inner finger as a towel holder. The vertical model (baseplate 300 mm) is very
button. The fixings are optimized for glass 8 mm in thickness. Drill hole discreet. Drill hole Ø 10 mm.
RL
LG 50m
2m20
Lg 520 mm RL 50mmm
Lg 320
Single horizontal handle – 20x20 Single vertical handle – 20x20
Polished Polished
stainless steel stainless steel
70519B 70518A
50
ADLER-33 a? 64-V-GB-03/17:CATALOGUE PAROIS DE DOUCHE 12/04/17 12:41 Page 51
Range of single or double stainless steel lever handles Ø20 to 45 mm as technical sales. Short lead times. French manufacture. Standard finish
standard for doors from 6 to 16 mm (very easily adaptable to doors of “brushed stainless steel” grain 400. Optional “mirror polished” finish to
any thickness). These handles are available from stock (some standard be added to the order: code 70756K for single handles or 70757L for
sizes) or, more generally, are bespoke manufactured: length, c to double handles. Can also be produced in other materials, shapes and
C distances, additional spacers to be defined by the customer on an finishes.
order form available to download on our website or obtainable from our
Brushed Brushed
stainless steel stainless steel
70766V 70765U
Polishing
Single handle 70756K
Polishing
Double handle 70757L
51
ADLER-33 a? 64-V-GB-03/17:CATALOGUE PAROIS DE DOUCHE 12/04/17 12:41 Page 52
For easy, reliable fixing on any type of shower enclosure wall or wall and finally screw fixing after back-drilling the wall and are a simple and
covering, with very low play and without joints or framing sections, Adler effective method for correcting wall flatness and verticality defects. They
has developed a range of aluminium sections, chromed or anodized with also mean that clips can be fixed to the tray without drilling it. And the
a brushed stainless steel finish, each integrating multiple functions: sections, called make-up models, can also compensate for +/-4 mm of
anchorage and retention of sealing mastic on a wide variety of substrates; play or defect and make some shower cubicle models reversible: ideal for
screw points for the fixings (clips) or hinging parts (hinges); grooves for the distribution and factory assembled sectors. The wall sections are
durable fixing of any deflector, sealing/braking, waterproofing or designed to take Capsi hinges and clips and Clip-In Door and Adler
anti-finger trap sections. These sections are for shimming, then bonding VF lift-off hinges as standard.
78022Z/78023A: Lg 1m
Threshold strip 14x5 78024B/78025C: Lg 1m70 Screw fix point ea.
78026D/78027F: Lg 2m70
Plain
Chromed 78028G
78022Z
78024B
78026D
Anodized
stainless steel finish
78023A
78025C
78027F
Flat section 38x5 78004F: Lg 2m14 Flat section 38x5 78002 : Lg 2m14
centre to centre distance 1550 78005G: Lg 2m80 centre to centre distance 1800 78003D: Lg 2m80
Chromed Chromed
78004F 78002C
Anodized Anodized
stainless steel finish stainless steel finish
78005G 78003D
Plain Unbehandelt
78034N 78013Q
* Delivered with 1 flexible seal for waterlightness and 1 hard seal for Capsi usage.
53
ADLER-33 a? 64-V-GB-03/17:CATALOGUE PAROIS DE DOUCHE 12/04/17 12:41 Page 54
Anodized Anodized
stainless steel finisht stainless steel finisht
78021Y 78033M
Plain Plain
78019W 78031K
Make-up section – 25x25 centre 78011N: LG 2m14 Make-up section - 25x25 78017U: LG 2m14
78012P: LG 2m80 78018V: LG 2m80
to centre distances 1550 & 1800* 78010M: LG 2m80 centre distances 1550 & 1800 / 78016T: LG 2m80
stiffener*
Chromed Chromed
78011N 78017U
Anodized Anodized
stainless steel finisht stainless steel finisht
78012P 78018V
Plain Plain
78010M 78016T
* Delivered with 1 flexible seal for waterlightness and 1 hard seal for Capsi usage.
The range of aluminium sections for shower cubicles is completed by used to remedy more serious defects of parallelism between walls or
more solid sections for heavy fixings and intensive use. They can also be dimensional errors. They take standard half-plate wall hinges.
Anodized Anodized
stainless steel finisht stainless steel finisht
78009L 78007J
54
ADLER-33 a? 64-V-GB-03/17:CATALOGUE PAROIS DE DOUCHE 12/04/17 12:41 Page 55
Adler develops innovative systems for clip-on and sport fixing of uncoated Double glass start section
laminated glass. To protect the fragile edges and form an initial barrier LG:2m45
glass 10mm – ADLER VF
to moisture diffusion in the PVB insert, for example, Adler has designed
a very fine adhesive aluminium section for bonding around 55.2 glass. Anodized
This very fine section contains a groove in which to fit a specially deve- stainless steel finisht
loped seal profile which is used for indexing in the closed position and 78072A
total waterproofing of a door on an Adlock pivot or Adler VF hinge. This
section is also ideal for forming a seal on the free edge of a Clip-In Door Polished gloss
without damaging the exceptional transparency of that product. 78073B
ALU
The wall flats 38 mm wide used to fix Capsi hinges to walls which are not
78029H: LG 2m14
flat or vertical can be usefully installed as threshold strips or plinths to Flat section 38x5
start and support the construction of self-supporting structures. With 78030J: LG
these sections, a frame is made on the floor which is perfectly to size and
Chromed
level and absolutely horizontal and into which the various connectors 78029H
supporting the partition can be screw fixed directly; the sections are
therefore supplied finished but without machining; this can consist simply Anodized
of milled holes to be drilled at the time of assembly to match the actual stainless steel finisht
dimensions of the installation. 78030J
55
ADLER-33 a? 64-V-GB-03/17:CATALOGUE PAROIS DE DOUCHE 12/04/17 12:41 Page 56
56
ADLER-33 a? 64-V-GB-03/17:CATALOGUE PAROIS DE DOUCHE 12/04/17 12:42 Page 57
790 – 805
The Epsila range of Capsi, Clip-In Door, Adler VF, Adslide and Adlock tallation is impeccable; the installation time is significantly reduced.
shower enclosures embodies the Adler research to achieve transparent At the base of the door, Adler recommends bonding of deflector
solutions without seals or frames but watertight in use. The few profiles which force the water back inside of the shower cubicle:
linings that remain essential, between fixed panels and walls for never use seals, which obstruct the free movement of the door and
example, can be obtained simply by pre-bonding silicone profiles on its very precise closure.
the matching edges of the fixed panels. The finish quality of the ins-
Bonded square seal profile Lg 2m20 Water drain deflector profile Lg 1m95
8x8 mm adhesive 13x13mm Transparent
Transparent PMMA
79036K polycarbonate
79043S
Rl 10m
Tpe-p-s
79091U
Rl 3m50
Translucent silicone
79062N
Rl 25m
Translucent silicone
79016N
58
ADLER-33 a? 64-V-GB-03/17:CATALOGUE PAROIS DE DOUCHE 12/04/17 12:42 Page 59
A complete range of seals and waterproofing profiles fixed with a PVC example, and to yellowing. Where appropriate, the lips of the seals are
clip. Some profiles are deflectors, some have a lip or bead acting as a grained to limit the risk that they might stick together during prolonged
seal and others integrate both functions in the same profile All are at closure; and the risk of premature damage to the seals – by tearing
least half hard: the clip is rigid when the lips have to remain flexible. or pull-of. In the latest version of the magnetic seals, they are reversible
Sometimes the clip contains internal stops and small, flexible PVC lips (called multipolar), preventing any risk of confusion between North
for adaptation to various glass thicknesses and good adhesion to the and South seals. These advantages of versatility and mechanical, UV
edge of the panel. The materials are constantly developing and the and sticking resistance again slightly limit the transparency of the seal:
majority of Adler seals offer maximum resistance to UV radiation, for it remains translucent.
Central lip seal profile Lg 2m20 Central lip seal profile Lg 2m20
6mm 8mm
Translucent PVC Translucent PVC
79001W 79002X
59
ADLER-33 a? 64-V-GB-03/17:CATALOGUE PAROIS DE DOUCHE 12/04/17 12:42 Page 60
Offset lip seal profile LG: 2m magnetic seal profile – North LG: 1m 95
6-8mm 90deg - 6-8mm
Translucent PVC White PVC
79048X
79045U
magnetic seal profile – South LG: 1m 95 magnetic seal profile – Multipolar LG: 2m
90deg - 6-8mm 6-8mm White PVC
White PVC
79046V 79051A
Adler also offers a waterproofing profile model to slide into a standard LG: 1m
Tubular seal profile / aluminium
groove in aluminium edge sections.
section 10mm
PVC grey
79052B
60
ADLER-33 a? 64-V-GB-03/17:CATALOGUE PAROIS DE DOUCHE 12/04/17 12:42 Page 61
Adler kit for waterproofing profiles, PVC clip-on or polycarbonate bonded: see in detail in 790a and 790b.
Offset lip seal profile 2 x 1m Adhesive water drain deflector LG: 1,95 m
6-8mm profile – 13x13mm transparent PMMA
Translucent PVC 80526D
80524B
Magnetic seal profiles -North/South 90° - 2x 1m95 Offset lip seal profile LG: 2 m
6-8mm (180° applicataion take 2 seals 6-8mm
with same polarity - eg. : N/N ou S/S) White PVC Translucent PVC
6-8mm 80530J 80532L
Perpendicular lip seal profile LG: 2m Offset lip seal profile LG: 1 m
6-8mm 4-6mm
Translucent PVC Translucent PVC
80533M 80535P
Perpendicular lip seal profile LG: 1m Water drain lip seal profile LG: 1 m
4-6mm – 4-6mm
Translucent PVC Translucent PVC
80536Q 80538S
61
ADLER-33 a? 64-V-GB-03/17:CATALOGUE PAROIS DE DOUCHE 12/04/17 12:42 Page 62
Adler kit for waterproofing profiles fixed in an aluminium section: see in detail in 790c.
Adler kit offers a very precise and safe mitring cutter for easy trim- sary to adapt the length of the standard profiles to the actual di-
ming of waterproofing profiles. This cutter will prove an essential mensions of the installation.
tool for repeated shower cubicle installations whenever it is neces-
Stück
Seitenschneider für Dichtungen
80518V
62
ADLER-33 a? 64-V-GB-03/17:CATALOGUE PAROIS DE DOUCHE 12/04/17 12:42 Page 63
Stiffener
699 b
69836K
Hinge
646 b
64672W
& 64689Q
Clip
Hinge 503 a
50333L
646 b
64672W
Aluminium
section
780 a
78014R
Aluminium
section
780 a
78002C
& 78028G
Aluminium
section
780 a
78022Z
Waterproof- Aluminium
ing profile section
790 a 780a
79043S 78022Z
& 78028G
Clip
503b
50325B
63
ADLER-CAT -GB -PAGE 64:CATALOGUE PAROIS DE DOUCHE 7/04/17 11:10 Page 1
INNOVATION
1,500
500
Miniaturisation of the hinge owing to optimised dis-
tribution of mounting points on the glass and wall.
Original shimming method (cork - butyl or 100%-
0 recyclable rigid transparent shims).
0 500 1,000
Width (mm)
i.e. +/–35 mm
3.50 10,00
CAPSI 5,00
ISODOUCHE
3.00 0
in any position
0
1.50
9 sec
s
15 35°
1.00
6 sec
25°
4 sec
15°
0.50