Professional Documents
Culture Documents
Precision Data Working Product Wise For Various Modes of Transport
Precision Data Working Product Wise For Various Modes of Transport
Test Requirements
Characteristic
Method Limits
Repetabil Reprodu
Upper Lower
ity cibility
(A1) (A2)
770 710
Density @ 15oC, Kg/m3 P:16 0.5 1.2
P:18/ 45 10 1 3
Distillation:(E-70), % v
D:86 70 40 1 3
Distillation:(E-100), % v
90 1 3
Distillation:(E-180), % v
215 1 4
FBP
88 0 1
RON P:27
88 0.2 0.7
D:2699
40
Existent Gum, g/m3 P:29 11.87 23.33
0.05
Sulphur, Total % mass P:34 0.005 0.0112
60 35
(RVP) at 38oC kPa P:39 0.02 0.04
1 0.04 0.18
Benzene, % by Vol. D:3606
3 0.03 0.84
0.013
Lead, g/lit IP:352
0.002 0.008
ata MS BSII IS 2796
Acceptable Not OK Margins,
A1- Margins, Supplier Recipient
A2>4R; , ,
A1,A2>2
R A1-0.59R A2+0.59R A1+0.59R A2-0.59R Remarks
0 0.0097 NOT OK
Application of Precision Data HSD IS 1460 BSIIAcceptable
A1- Margins, Supplier
Test Requirements
Sl. Characteristic A2>4R;
Method Limits Repetabil Reprodu A1,A2>2
Upper Lower
ity cibility R A1-0.59R
(A1) (A2)
1 860 820 0.5 1.2 40>4.8 859.29
Density @ 15oC, Kg/m3 P:16
2 0.01
Ash, % by Mass P:4 0.01=0.01
0.003 0.005 0.007
3 0.3
RCR, %by mass P:8 0.3>0.124
0.04 0.062 0.263
4 0.25 0.04 0.05 0.25>0.1 0.22
Sulphur, Total % m P:33 0.05>0.09
5 0.05
Sulphur, Total % m IP:336 4
0.014 0.047 0.0223
6 3 3 6 15>12 0
Pour Point,oC,winter P:10
7 15 3 6 3>12 11.46
Pour,oC,summer P:10
8 48 0 2 48>4
Cetane Number P:9
9 35 1 1.5 35>3
Flash Point P:20
10 5 2 0.018 0.035 3>0.14 4.98
K V, cSt at 40 oC P:25
5 2 0.007 0.014 3>0.06 4.99
11 P:18/ 85 2 5 85>10
Distill(E-350), % v
D:86 95 2 5 95>10
Distill:(E-370), % v
12 0.2 0.1 0.2 0.2>0.4 0.08
Acidity -T, mgKOH/g P:2
13 0.05 0.1 0.2 0.05>0.4 -0.07
Water Content, % v P:40
14 0.05
Sediment P:30 0.05=0.05
0.03 0.05 0.02
BSIIAcceptable
Margins, Supplier Not OK Margins,
Recipient
0.013 BORDER
0.337 OK
0.28 OK
0.0777 NOT OK
6.54 OK
18.54 NOT OK
49.18 46.82 OK
35.89 34.12 OK
2.02 5.02 1.98 OK
2.01 5.01 1.99 OK
87.95 82.05 OK
97.95 92.05 OK
0.32 NOT OK
0.17 NOT OK
0.08 BORDER
Acceptable
Application of Precision Data HSD IS 1460 BSIII
A1- Margins, Supplier
Test Requirements
Characteristic A2>4R;
Method Limits Repetabil Reprodu A1,A2>2
Upper Lower
ity cibility R A1-0.59R
(A1) (A2)
845 820 0.5 1.2 25>4.8 844.29
Density @ 15oC, Kg/m3 P:16
0.01 0
Ash, % by Mass P:4 0.01=0.01
0.003 0.005 0.007
0.3 0
RCR, %by mass P:8 0.3>0.124
0.04 0.062 0.26
0.035>0.0
0.035 0
Sulphur, Total % mass D:4294 22
0.006 0.011 0.0285
0 51 0 2 51>4 49.82
Cetane No P:9
0 35 1 1.5 35>3 34.12
Flash Point P:2
4.5 2 0.016 0.032 3>0.14 4.48
K V, cSt at 40 oC P:25
4.5 2 0.007 0.014 3>0.06 4.49
0 95 2 5 95>10 92.05
Distillation(E-360), % v P18/ D:86
0.02 0
Water Content, %(v/v) P:40 0.02=0.02
0.003 0.01 0.01
6 0 1 2 6>4 4.82
CFPP,oC,winter P:110
18 0 0.5 1 18>2 17.41
CFPP,oC,summer P:110
0 25 6.7 13.1 25>26.2 17.27
Oxidation Stability D:2274
11 0 1.77 3.83 11>7.66 8.74
PAH, % m IP:391
0 460 63 120 460>204 389.2
Lubricity, Mu IP:450
Acceptable
0 BSIII
Margins, Supplier Not OK Margins,
Recipient
75 76 76
150oC , % v -
90 91.8 91 92
180oC , % v Min -
60 58 58
RVP at 38oC kPa 35 – 60 3.2/5.2 37.1-57.6 38-58*
3 35 36.8 37
Flash Point, Deg C, Min 1/1.5
4 Sulphur, Total Percent by mass, 0.05 0.7 225 450
Max.
5 460 388 420
Lubricity, Mu, Max 60/120
7 Copper Strip Corrosion, for3 hrs 1 Qualitative test. No
NA 1a
Precision limit
at 50 C, Max.
o
applicable
d Pipeline
Justification/Remarks
Def reqmnt-0.65
S Prod Characteristic Road/Rail Movement Coastal
1 MS Density +/-0.002 @ 15 oC +/-0.002 @ 15 oC
RON 0.5 unit > BS-II -88 0.5 unit > BS-II -88
BS-III-91 BS-III-91
Distillation 1% above of Min Range 1% above of Min Range
FBP Min 10oC < BS-II:215 oC; Min 10oC < BS-II:215 oC;
BS-III:210 oC BS-III:210 oC
Cetane No - 0.4>BS-II:48;BS-III:51
nce by Marketing/OMC under various modes of transport: Road/Rail, Coastal and Pipeline Transfers
4 ATF Density +/-0.002 @ 15 oC +/-0.002 @ 15 oC
Particulate Visual inspection- free from Visual inspection- free
Contamination sediments from sediments
S Test E:
1 Appearance
2 Density @ 15 oC
3 Flash Point
4 Existent Gum
5 Copper Strip Corrosion Test
6 Distillation
7 Doctor Test
8 Water Reaction
9 Freezing Point
Note: The Customer may take product Coastally and push into cross country pipelines at the destination. In such a eventuality, the man
have to take care of the Max/Min limits of the most stringent requirement. In ATF conductivity insisted ex Mktg Company is 250 PSM Mi
ref Tanks it has to be in the range of 350 + as per our experience factor.
Pipeline Transfers Guarantee to Customer
BS-III-91
1% above of Min Range BS-II Rec@70:10-45%;@100:40-70%
@180: 90% Min
BS-III Rec@70:10-45%;@100:40-70%
@150: 75% Min
Min 20 oC < BS-II:215 oC; BS-III:210 oC BS-II:215 oC;
{when SKO is intermediate Product}
BS-III:210 oC
0.2<3 BS-II 0.1< 1 BS-II: 3 Max
BS-III BS-III : 1 Max
BS-I:38 Min; 58 Max BS-I 35-60 Kpa BS-
III 60 Kpa Max
BS-II: 58 Max
50 ppm < BS-II:500 ppm; BS-II:500 ppm; BS-
III:150 ppm
25 ppm<BS-III:150 ppm
{when SKO is intermediate Product}
+/-0.002 @ 15 oC 775-840
BS-III 51
0.4>BS-II:48;BS-III:51 BS-II: 48;
BS-III 51
2> 35 oC BS-II/BS-III: 35 oC Min
40< BS-II/BS-III: 460 mu BS-II: 460;
BS-III 460
3<BS-III: 25 BS-II:NA
Sr Test H:
1 Density @ 15 oC
2 Temperature
3 Appearance
4 Water / Sediments
We are producing only one Grade of ATF. Since the Defence Grade is more
stringent, the Defence specs needs to be met so that we can supply to both civil as
well as defence requirements.
country pipelines at the destination. In such a eventuality, the manufacturing specs will
ent. In ATF conductivity insisted ex Mktg Company is 250 PSM Min by OMCs. Therefore at
r.
S Prod Characteristic Refinery to Mkt Road/Rail Coastal
Movement
1 MS Density <+/-0.0025 @ 15 oC +/-0.0025 @ 15 oC +/-0.0025 @ 15 oC
RON(AKI) - 0.5 unit > BS-II 0.5 unit > BS-II -88(93)
-88(93)
BS-III-91 BS-III-91
FBP - - Min 10oC < BS-II:215 oC;
BS-III:210 oC
BS-III:210 oC
< BS-II:500 ppm; 50 ppm < BS-II:500 ppm; BS-II:500 ppm;
BS-III:150
S-III:150 ppm 25 ppm<BS-III:150 ppm ppm