Professional Documents
Culture Documents
Catalogo Parker Scem PDF
Catalogo Parker Scem PDF
Catalogo Parker Scem PDF
Bulletin GPSV-GB
General Specifications
Engineering Specifications • Sealing materials (“O” rings, discs, diaphragms):
NBR (N)
• Solenoid valves suitable for water, air, inert gasses, light Viton (\/)
oils and other non corrosive fluids compatible with brass Ethylene Propilene (H)
and viscosity not exeeding 2 °E. Ruby (R)
Teflon (T)
• Models suitable for operation with hot water and steam up • Enclosing tube:
to 180 °C. Stainless Steel AISI 304.
• Plungers (fixed and movable):
• Other versions suitable for natural gas and combustible oils Stainless Steel AISI 430 FR.
with viscosity from 2 up to 7 °E. • Plunger spring:
Stainless Steel AISI 302.
• Braize material:
TYPES Silver Alloy (56% Ag.)
• Shading ring:
• 2/2 Way N.C. (Normally Closed) direct or pilot (diaphragm), Copper (98% Cu) tropical.
operated, hung diaphragm (drawn diaphragm), piston type, • Cover screws:
with threaded connections from 1/8” to 3” Zinc Plated C 35 B steel.
• 2/2 Way N.O. (Normally Open) direct or pilot (diaphragm)
operated with threaded connections from 1/4” to 2” INSTALLATION
• 3/2 Way N.C. (Normally Closed) or Universal, direct The solenoid valves may be mounted in any position as long
operated with threaded connections of 1/8”, 1/4” as the coil is not below the center line of the body. This is to
and flanged connection. prevent foreign particles entering the enclosing tube.
PACKING
The majority of the solenoid valves are supplied with valve
MATERIALS body (PM) and coil packed separately.
• Valve body: CONNECTIONS:
Forged Brass OT58 - UNI 5705 Connections according with UNI-ISO 7/1 standards with "G"
type ends for all the models except for 131.4 which has "R"
type ends.
B
R
A C
Fig. 1
Series ØG A B C D Series ØG A B C D
[“] [mm] [mm] [mm] [mm] [“] [mm] [mm] [mm] [mm]
146 FV 1/8 40.0 75.5 18 37.5 174.4 FV 1/8* 30 56 14 36
146 HV 1/8 40.0 75.5 18 37.5 174.4 WV 1/4 30 58.5 18 36
146 WH 1/4 40.0 74.5 18 37.5
146 YV 1/4 40.0 75.5 18 37.5
146.3 KV 1/4 40.0 75.5 18 37.5
146.3 ABW 1/4 40.0 75.5 18 37.5
D
D
B
B
G
G
M4x8*
A C A C
Fig. 2 *Not available on 146.3 Fig. 3 *174 AV/BV/FV (w/o mount. bkt.)
Series ØG A B C D Series ØG A B C D
[“] [mm] [mm] [mm] [mm] [“] [mm] [mm] [mm] [mm]
133 IN 3/8 69,0 92,5 40,0 37,5 168.1 IN 3/8 69.0 93.5 40.0 37.5
133 AN 1/2 72,0 94,5 40,0 37,5 168.1 AN 1/2 72.0 95.5 40.0 37.5
133 CN 3/4 100,0 100,0 65,0 37,5 168.1 CN 3/4 100.0 101.0 65.0 37.5
133 DN 1 104,0 105,5 65,0 37,5 168.1 DN 1 104.0 106.5 65.0 37.5
133.2 EN 1 1/4 145,0 127,0 102,0 37,5
133.2 FN 1 1/2 145,0 127,0 102,0 37,5
133 GN 2 173,0 141,0 118,0 37,5
133 LN 2 1/2 245,0 188,0 184,0 37,5
133 MN 3 250,0 188,0 184,0 37,5
D
D
B
B
G
G
A C
A C
Dis. 4 Fig. 5
Series ØG A B C D Series ØG A B C D
[“] [mm] [mm] [mm] [mm] [“] [mm] [mm] [mm] [mm]
173 IN 3/8 60 86 40 36 123 IV 3/8 69 83 40 37.5
173 AN 1/2 60 86 40 36 123 AV 1/2 72 85 40 37.5
123 CV 3/4 100 120 65 59
123 DV 1 104 125 65 59
D
B
B
G
A C
A C
Fig. 6 Fig. 7
Series ØG A B C D Series ØG A B C D
[“] [mm] [mm] [mm] [mm] [“] [mm] [mm] [mm] [mm]
151 GV 1/4 40.0 82.5 18 45.5 136 Y 1/4 40 81 17 43
151 HV 1/4 40.0 82.5 18 45.5
90°
Connection at
D
D
B
B
Nut
G
G
M4x8*
Fig. 8 Ø M4 x 6 8 Fig. 9 A C
A C
Series ØG A B C D Series ØG A B C D
[“] [mm] [mm] [mm] [mm] [“] [mm] [mm] [mm] [mm]
143 IN 3/8 69 92,5 40 43 169.1 IN 3/8 69.0 101.0 40.0 43
143 AN 1/2 72 94,5 40 43 169.1 AN 1/2 72.0 103.0 40.0 43
143 CN 3/4 100 100,0 65 43 169.1 CN 3/4 100.0 108.5 65.0 43
143 DN 1 104 105,5 65 43 169.1 DN 1 104.0 114.0 65.0 43
143.2 EN 1 1/4 104 127,0 102 43
143.2 FN 1 1/2 104 127,0 102 43
143 GN 2 104 141,0 118 43
143 LN 2 1/2 245 188,0 184 37,5
143 MN 3 250 188,0 184 37,5
D
D
B
B
G
G
A C
Fig. 10 Fig. 11
A C
D
141 AV 1/8 40 82.5 18 45.5
D
141 BV 1/8 40 82.5 18 45.5
B
141 FV 1/4 40 82.5 18 45.5
141 GV 1/4 40 82.5 18 45.5
G
Ø M4 x 6 8
C A C
A
Fig. 12 Fig. 13
NOTES TO TABLES:
1) For use with air the Max. Differ. Pressure (M.O.P.D.) 3) Models suitable for high cycle operation.
is 25% higher than shown. 4) For natural gases at 2000 mm H2O pressure minimum.
2) Sizes up to 1” port available with Viton diaphragm. 5) Models available with man. operator and closure speed control.
Flow capacity table (water m3/h) in function of pressure drop (∆P)
Series Orif. Kv ∆P
[mm] [m3/h] [bar]
0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 1 1,5
174AV 1,5 0,06 00,2 0,03 0,03 0,04 0,04 0,05 0,05 0,05 0,06 0,07
174BV 2,0 0,11 0,03 0,05 0,06 0,07 0,08 0,09 0,09 0,10 0,11 0,13
174FV-WV 2,5 0,14 0,04 0,06 0,08 0,09 0,10 0,11 0,12 0,13 0,14 0,17
146FV-WV 2,5 0,20 0,06 0,09 0,10 0,12 0,14 0,15 0,16 0,17 0,20 0,24
146HV-YV 3 0,27 0,08 0,12 0,15 0,17 0,19 0,20 0,22 0,24 0,27 0,33
146,3KV 4,5 0,53 0,16 0,23 0,29 0,33 0,37 0,41 0,04 0,47 0,53 0,64
146,3ABV 6 0,75 0,24 0,33 0,41 0,47 0,53 0,58 0,62 0,67 0,75 0,92
123IV-AV 13 2,40 0,75 1,07 1,31 1,51 1,69 1,85 2,00 2,14 2,40 2,93
133IN-AN* 13 3,00 0,95 1,34 1,64 1,89 2,12 2,32 2,50 2,68 3,00 3,67
123CV 20 6,00 1,89 2,68 3,28 3,79 4,24 4,64 5,01 5,36 6,00 7,34
133CN-143CN 20 8,40 2,75 3,75 4,59 5,30 5,92 6,50 7,02 7,50 8,40 10,28
123DV 25 7,00 2,21 3,12 3,82 4,42 4,94 5,41 5,85 6,25 7,00 8,56
133DN-143DV 25 9,60 3,03 4,29 5,25 6,06 6,78 7,43 8,02 8,58 9,60 11,75
133,2EN-143,2EN 35 25,20 7,96 11,26 13,78 15,92 17,81 19,50 21,06 22,52 25,20 30,84
133,2FN-143,2FN 40 30,00 9,48 13,41 16,41 18,96 21,21 23,22 25,08 26,82 30,00 36,72
133GN-143GN 50 37,20 11,75 16,62 20,34 23,51 26,30 28,79 31,09 33,25 37,20 45,53
133LN-143LN 65 66,00 – 29,52 36,15 41,74 46,67 51,12 56,22 59,03 66,00 80,83
133MN-143MN 75 80,00 – 35,78 43,82 50,60 56,57 61,97 66,93 71,55 80,00 97,98
Series ØG A B C D Series ØG A B C D
[“] [mm] [mm] [mm] [mm] [“] [mm] [mm] [mm] [mm]
126YH 1/4 40 75.5 18 37.5 158 IH 1/4 57 82 18 37.5
126YT 1/4 40 75.5 18 37.5 158 IT 1/4 57 82 18 37.5
D
D
B
B
G
G
M4x8* G
Fig. 14 A C
Fig. 15 A C
Series ØG A B C D Series ØG A B C D
[“] [mm] [mm] [mm] [mm] [“] [mm] [mm] [mm] [mm]
161.4 AV 1/8 32 56 14 37.5 133 IH 3/8 69 92.5 40.0 37.5
161.4 EV 1/4 38 60 16 37.5 133 AH 1/2 72 94.5 40.0 37.5
133 CH 3/4 100 100.0 65.0 37.5
133 DH 1 104 105.5 65.0 37.5
133.2 EN 1 1/4 145 127.0 102.0 37.5
133.2 FH 1 1/2 145 127.0 102.0 37.5
133 GH 2 173 141.0 118.0 37.5
D
B
D
B
G
C
Fig. 16 A
Fig. 17 A C
C
D
B
B
G
A C
G
Fig. 18 Fig. 19
B
G
A C
A C
Fig. 20 Fig. 21
Series Type A B C D
[mm] [mm] [mm] [mm]
128 GR 128 G 32 63.5 32 43
128 GR-UL 128 G 32 63.5 32 43
NOTES TO TABLES:
D
1) UL approved.
2) Max. static pressure 14.5 bar.
3) Max. pressure for steam 4 bar (140°C). A C
Fig. 22
Series ØR A B C D Series ØG A B C D
[“] [mm] [mm] [mm] [mm] [“] [mm] [mm] [mm] [mm]
131 IN 1/8 30 53 16 37.5 131 NX 1/8 30 53 16 37.5
131 AN 1/8 30 53 16 37.5
B
D
G
R
A C
A C
Fig. 23 Fig. 24
Series ØR A B C D Series ØG A B C D
[“] [mm] [mm] [mm] [mm] [“] [mm] [mm] [mm] [mm]
131.4 CG 1/8 38 60 60 37.5 140 IR 1/8 40 75.5 18 37.5
131.4 GG 1/4 38 60 60 37.5 140 CR 1/4 40 75.5 18 37.5
140 DR 1/4 40 75.5 18 37.5
140.4 AR 1/8 40 71 18 37.5
140.4 DR 1/4 40 71 18 37.5
7
x
4
M
D
D
B
B
G
R
M4x8*
A C
A C
Fig. 25 Fig. 26
D
B
B
G
G
M4x8
A C
A C
Fig. 27 Fig. 28
Series ØG A B C D Series ØG A B C D
[“] [mm] [mm] [mm] [mm] [“] [mm] [mm] [mm] [mm]
153 BV 3/8 53 77.5 26 37.5 120.4 IR 1/8 40 75 18 37.5
153 GV 1/2 53 77.5 26 37.5 120.4 AR 1/4 40 75 18 37.5
D
B
B
G
G
FILTRO 0.2
A C A C
Fig. 29 Fig. 30
NOTES TO TABLES:
1) DIN approved.
2) DIN DVGW and BS approved.
3) DIN approved (w/o MNTG. hole).
4) UL approved.
5) Italian Min. of Int. approved.
5.5-1
0
5.5 21 L ±10
26.5 10 ±0.1
1.5 ± 0.3
+0.2
6.7 0 35
+0.2
0
1.1+0,20
5.2
Ø 3M
2.5±0.1
M3
18 ±0.1
+1.5
Ø 28
29x29
Ø 8.2
26.5
+1
27 -0
42
2+0.30
+0,7
0.5 0
+0.2
stagn
ato 8
1.1 0
5
Ø 6÷10 26.5
+1.5
0 2.5
1.1
28
18
Three pin Connector DIN 43650 B
(WB Coil)
1.1
6.7
18
28
20
30 11
+0,2
28 6.7
L ±10 Part. No
± 0.1
1.1+0.2
8.5
500 mm 169110
1000 mm 169150
14.5
31
28
6.3
1 2
M3
40
+ 0.2
1.5 1.1
5.5 Special plug with three core cable
(X Coil)
Ø 6÷10 Ø 18
The manual control is used to open the valve without The closure time of the models 133 CNCMV, 133 DNCMV,
supplying voltage to the coil. The control consists of a 133.2 ENCMV, 133.2 FNCMV, 133 GNCMV can be
slotted-head screw for a screwdriver and it has two changed by means of the adjusting screw (Fig. 2 and 3).
possible positions: The latter, by acting as a throttle on the inlet equalisation
(pilot) hole of the valve, slows down the closure speed of
CLOSED When the letter «C» is in the the valve, thus reducing water hammer.
upper position on the screw head (Fig. 1). The regulation range is from:
OPENED When the letter «A» is in the
upper position on the screw head (Fig. 1). SCREW FULLY OPEN
fig 2 max. closure speed
In the closed position the valve operates normally when SCREW FULLY CLOSED
coil is energized/deenergized. fig 3 valve always open, i.e.
the pilot hole of the valve is
closed completely.
C
A
G
Coil Type « Z »
Types available:
•ZB12 = 12 W d.c.
•ZB14 = 25 VA - 14 W a.c. Service (33 VA Inrush)
+0.4
43 12
- 0.2
•ZB16 = 16 W d.c.
2) Class H (180°C)
•ZH14 = 25 VA - 14 W a.c. Service (33 VA Inrush)
34.2
•ZH16 = 16 W d.c.
+0
- 0.4
10
Coil Type « Y »
Coil manufactured from class H
copper wire, moulded in thermoplastic:
ø 14.2
- (polyester) with 30% glass fiber;
31.5
Features:
Types available:
1) Class F (155°C)
❉ ❉ ❉ •YB09 = 15 VA - 9 W a.c. Service
(24 VA Inrush)
•YB12 = 12 W d.c.
•YB14 = 24 VA - 14 W a.c. Service
(32 VA Inrush)
•YB16 = 16 W d.c.
2) Class E (120°C)
•YEO9 = 15 VA - 9 W a.c.
Coil Type « J »
Features:
Types available:
61
❉ IMQ approved for standard voltages
ø 14.2
1) Class F (155°C)
•JB14 = 30 VA - 14 W a.c. Service (55 VA Inrush)
55
•ZB16 = 16 W d.c.
+0.4
- 0.2
49 12
47
+0
- 0.4
10
Coil Type « K »
Coil manufactured from class H
❉
copper wire, moulded in thermoplastic:
- (polyammide) with 30% glass fiber;
Features:
Types available:
1) Class F (155°C)
32
36
- 0.2
12 •KP10 = 10 W d.c.
2) Classe H (180°C)
32.5
Coil Type « X »
Features:
Types available:
36 12
32.5
Coil Type « W »
Coil manufactured from class H
❉
copper wire, moulded in thermoplastic:
- (polyester) with 30% glass fiber;
❉ Features:
Types available:
•WB5.0 = 5 W d.c.
•WB8.0 = 11 VA - 8 W a.c. Service (17 VA Inrush)
+0.4
- 0.2
32.5 12
22
+0
- 0.4
10