Professional Documents
Culture Documents
Grade 12 Melc I Session 3
Grade 12 Melc I Session 3
EIZABETH B. TUMALIP
SHS Coordinator
Noted by:
CRISOSTOMO T. BALNEG
Principal I
Review
Direction: Identify the tools being described. Write your answer on your answer sheet.
Learning Objectives:
After Reading this discussion you must be able to
Identify parts of electrical power and hydraulic tools commonly used
during electrical wiring installation.
Now since you are done performing and answering the activities intended for
you to identify the electrical and hydraulic tools. This time let us deepen your
knowledge about electric and hydraulic tools through identifying major parts of it.
Below are the major parts of the common electric and hydraulic tools.
1. PARTS OF A NGLE GRINDER
1. TOOL REST- it is where the position of the grinder when not in use.
2. ON/OFF SWITCH- use to switch the motor ON or OFF.
3. SWITCH LOCK- a button which can keep the switch in the ON position.
4. ELECTRICAL CORD- with the plug, it is use to connect the drill to the
electric supply.
5. CORD STRAIN RELIEVER- It prevents the electric cord to suffer from
strain during and after operation.
6. HANDLE- It is held by the operator when operating for better performance.
7. GUARD- A metallic covering used in trapping the chips flying from the
work piece.
8. GRINDING DISK- Manufactured stone disk for cutting/grinding concrete/
metal materials.
9. LOCKING NUT- a nut use to hold/lock the grinding disk firmly to avoid
accident.
10. SPINDLE- Used to attach the grinding disk to the rotor of the motor.
2. PARTS OF ELECTRIC DRILL
1.____________
2. ___________
3. ___________
4. ___________
5. ___________
6. ___________
7. ___________
8. ___________
ACTIVITY 2
Direction: Can you name the picture? Identify its parts and define their uses. Write your
answers on a quiz notebook.
ACTIVITY 3
Direction: On a separate sheet of paper make a crossword puzzle to define the parts of an
angle grinder and a heat gun.
POST ASSESSMENT
Direction: Match the following descriptions to the given parts of power tools.
REFERENCES
Philippine Electrical Code; Year 2000 Edition; Volume I by the Institute of Integrated
Electrical Engineers of the Philippines. First Printing June 2002
Noel M. Espineli, Building Wiring Installation NCII Competency Based Learning
Materials Second Year, Department of Education: 2009.