Professional Documents
Culture Documents
200Khz, 4Μa, Rail-To-Rail I/O Op Amps With Shutdown: General Description Features
200Khz, 4Μa, Rail-To-Rail I/O Op Amps With Shutdown: General Description Features
200Khz, 4Μa, Rail-To-Rail I/O Op Amps With Shutdown: General Description Features
MAX9910–MAX9913
The single MAX9910/MAX9911 and dual MAX9912/ o 200kHz GBW
MAX9913 operational amplifiers (op amps) feature a
maximized ratio of gain bandwidth (GBW) to supply o Ultra-Low 4µA Supply Current
current and are ideal for battery-powered applications o Single 1.8V to 5.5V Supply Voltage Range
such as portable instrumentation, portable medical
equipment, and wireless handsets. These CMOS op o Ultra-Low 1pA Input Bias Current
amps feature an ultra-low input-bias current of 1pA, rail- o Rail-to-Rail Input and Output Voltage Ranges
to-rail inputs and outputs, low supply current of 4µA,
and operate from a single 1.8V to 5.5V supply. For o Low ±200µV Input Offset Voltage
additional power conservation, the MAX9911/MAX9913
o Low 0.001µA Shutdown Current
feature a low-power shutdown mode that reduces sup-
ply current to 1nA, and puts the amplifiers’ outputs in a o High-Impedance Output During Shutdown
high-impedance state. These devices are unity-gain (MAX9911/MAX9913)
stable with a 200kHz GBW product.
o Unity-Gain Stable
The MAX9910 is available in a 5-pin SC70 package. The
MAX9911 is available in tiny 6-bump WLP and a 6-pin o Available in Tiny WLP, SC70, SOT23, and µMAX
SC70 packages. The MAX9912 is available in an 8-pin Packages
SOT23 package, and the MAX9913 is available in a 10-
pin µMAX® package. All devices are specified over the
-40°C to +85°C extended operating temperature range.
Ordering Information
Applications
PIN- TOP
Portable Medical Devices PART TEMP RANGE
PACKAGE MARK
Portable Test Equipment MAX9910EXK+T -40°C to +85°C 5 SC70 AGA
Laptops MAX9910EXK-T -40°C to +85°C 5 SC70 AGA
Data-Acquisition Equipment MAX9911EXT+T -40°C to +85°C 6 SC70 ACA
MAX9911EXT-T -40°C to +85°C 6 SC70 ACA
Typical Operating Circuit MAX9911EWT+ -40°C to +85°C 6 WLP BQ
MAX9912EKA+T -40°C to +85°C 8 SOT23 AEJY
1.8V TO 5.5V
MAX9912EKA-T -40°C to +85°C 8 SOT23 AEJY
OUTA
VDD
MAX9913EUB -40°C to +85°C 10 µMAX —
VOUT MAX9913EUB+ -40°C to +85°C 10 µMAX —
INA- OUTB
+Denotes lead(Pb)-free/RoHS-compliant package.
25kΩ
INA+ INB-
VMID
INB+
VSS VMID + VBIAS
MAX9913
Selector Guide
ON ON
SHDNA SHDNB
AMPLIFIERS SHUTDOWN
OFF OFF PART
PER PACKAGE MODE
MAX9910EXK-T 1 No
1MΩ
RE
MAX9911EXT-T 1 Yes
GLUCOSE
CE WE
SENSOR MAX9912EKA-T 2 No
MAX9913EUB 2 Yes
THREE ELECTRODE GLUCOSE METER APPLICATION WITH SHUTDOWN
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.mxim-ic.com.
200kHz, 4µA, Rail-to-Rail
I/O Op Amps with Shutdown
ABSOLUTE MAXIMUM RATINGS
MAX9910–MAX9913
Power-Supply Voltage (VDD to VSS) ......................-0.3V to +6.0V 8-Pin SOT23 (derate 9.1mW/°C above +70°C)........... 727mW
IN_+, IN_-, OUT_, SHDN_............... (VSS - 0.3V) to (VDD + 0.3V) 10-Pin µMAX (derate 5.6mW/°C above +70°C) ...........444mW
Current into IN_+, IN_- ......................................................±20mA Operating Temperature Range .......................... -40°C to +85°C
Output Short-Circuit Duration to VDD or VSS ..............Continuous Junction Temperature .....................................................+150°C
Continuous Power Dissipation (TA = +70°C) Storage Temperature Range ............................-65°C to +150°C
5-Pin SC70 (derate 3.1mW/°C above +70°C) ............. 247mW Lead Temperature (excluding WLP, soldering 10s) ........+300°C
6-Bump WLP (derate 10.5mW/°C above +70°C).........840mW Soldering Temperature (reflow)
6-Pin SC70 (derate 3.1mW/°C above +70°C) ............. 245mW Lead(Pb)-Free Packages.............................................+260°C
Packages Containing Lead(Pb)...................................+240°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VDD = 1.8V to 5.5V, VSS = 0V, VCM = 0V, VOUT = VDD / 2, RL = ∞ connected to VDD / 2, SHDN_ = VDD, TA = +25°C, unless otherwise
noted.) (Note 1)
2 _______________________________________________________________________________________
200kHz, 4µA, Rail-to-Rail
I/O Op Amps with Shutdown
ELECTRICAL CHARACTERISTICS (continued)
MAX9910–MAX9913
(VDD = 1.8V to 5.5V, VSS = 0V, VCM = 0V, VOUT = VDD / 2, RL = ∞ connected to VDD / 2, SHDN_ = VDD, TA = +25°C, unless otherwise
noted.) (Note 1)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
VDD = 1.8V to 3.6V, MAX9911/MAX9913 0.4
SHDN_ Logic Low VIL V
VDD = 3.6V to 5.5V, MAX9911/MAX9913 0.8
VDD = 1.8V to 3.6V, MAX9911/MAX9913 1.4
SHDN_ Logic High VIH V
VDD = 3.6V to 5.5V, MAX9911/MAX9913 2
IIL SHDN_ = VSS, MAX9911/MAX9913 (Note 2) 1
SHDN_ Input Bias Current nA
IIH SHDN_ = VDD , MAX9911/MAX9913 500
SHDN_ = VSS, VOUT = 0V to VDD,
Output Leakage in Shutdown IOUT(SHDN_) 1 500 nA
MAX9911/MAX9913
Gain-Bandwidth Product 200 kHz
Slew Rate 0.1 V/µs
AV = 1V/V 30
Capacitive-Load Stability (See
No sustained AV = 10V/V 250
the Driving Capacitive Loads CLOAD pF
oscillations RL = 5kΩ, AV = 1V/V 200
Section)
RISO = 1kΩ, AV = 1V/V 100
Input Voltage-Noise Density f = 1kHz 400 nV/√Hz
Input Current-Noise Density f = 1kHz 0.001 pA/√Hz
Settling Time To 0.1%, VOUT = 2V step, AV = -1V/V 18 µs
IDD = 5% of normal operation,
Delay Time to Shutdown tSH 2 µs
VDD = 5.5V, VSHDN_ = 5.5V to 0 step
VOUT = 2.7V, VOUT settles to 0.1%,
Delay Time to Enable tEN 30 µs
VDD = 5.5V, VSHDN_ = 0 to 5.5V step
Power-Up Time VDD = 0 to 5.5V step 5 µs
ELECTRICAL CHARACTERISTICS
(VDD = 1.8V to 5.5V, VSS = 0V, VCM = 0V, VOUT = VDD / 2, RL = ∞ connected to VDD / 2, SHDN_ = VDD, TA = -40°C to +85°C, unless
otherwise noted.) (Note 1)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Supply Voltage Range VDD Guaranteed by PSRR test 1.8 5.5 V
MAX9910/MAX9911 5.5
Supply Current IDD VDD = 5.5V µA
MAX9912/MAX9913 11
Shutdown Supply Current IDD(SHDN_) SHDN_ = GND, MAX9911/MAX9913 1 µA
Input Offset Voltage VOS ±5 mV
Input-Offset-Voltage
TCVOS ±5 µV/°C
Temperature Coefficient
_______________________________________________________________________________________ 3
200kHz, 4µA, Rail-to-Rail
I/O Op Amps with Shutdown
ELECTRICAL CHARACTERISTICS (continued)
MAX9910–MAX9913
(VDD = 1.8V to 5.5V, VSS = 0V, VCM = 0V, VOUT = VDD / 2, RL = ∞ connected to VDD / 2, SHDN_ = VDD, TA = -40°C to +85°C, unless
otherwise noted.) (Note 1)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Input Bias Current IB ±30 pA
Input Offset Current IOS ±20 pA
VSS - VDD +
Input Common-Mode Range VCM Guaranteed by CMRR test V
0.05 0.05
Common-Mode Rejection Ratio CMRR -0.05V < VCM < VDD + 0.05V, VDD = 5.5V 60 dB
Power-Supply Rejection Ratio PSRR 1.8V < VDD < 5.5V 59 dB
25mV < VOUT < VDD - 25mV,
85
RL = 100kΩ, VDD = 5.5V
Open-Loop Gain AVOL dB
150mV < VOUT < VDD - 150mV,
80
RL = 5kΩ, VDD = 5.5V
RL = 100kΩ 5
Output-Voltage-Swing High VOH VDD - VOUT mV
RL = 5kΩ 90
RL = 100kΩ 5
Output-Voltage-Swing Low VOL VOUT - VSS mV
RL = 5kΩ 90
VDD = 1.8V to 3.6V 0.4
SHDN_ Logic Low VIL V
VDD = 3.6V to 5.5V 0.8
VDD = 1.8V to 3.6V, MAX9911/MAX9913 1.4
SHDN_ Logic High VIH V
VDD = 3.6V to 5.5V, MAX9911/MAX9913 2
IIL SHDN_ = VSS, MAX9911/MAX9913 5 nA
SHDN_ Input-Bias Current
IIH SHDN_ = VDD, MAX9911/MAX9913 1000 nA
SHDN_ = VSS, VOUT = 0V to VDD,
Output Leakage in Shutdown IOUT(SHDN_) 1000 nA
MAX9911/MAX9913
Note 1: Specifications are 100% tested at TA = +25°C (exceptions noted). All temperature limits are guaranteed by design.
Note 2: Guaranteed by design, not production tested.
4 _______________________________________________________________________________________
200kHz, 4µA, Rail-to-Rail
I/O Op Amps with Shutdown
MAX9910–MAX9913
Typical Operating Characteristics
(VDD = 3V, VSS = VCM = 0V, RL to VDD / 2, TA = +25°C, unless otherwise noted.)
MAX9910 toc02
MAX9910 toc03
8 DUAL TA = -40°C SHUTDOWN SUPPLY CURRENT (nA) 750
10
7 500 TA = -40°C
8
6 TA = +85°C 250 TA = +25°C
VOS (µV)
TA = +25°C
ICC (µA)
5 TA = -40°C 6 0
TA = +25°C
4 SINGLE -250
4
3 -500
TA = +85°C 2
2 -750
TA = +85°C
1 0 -1000
1.8 2.6 3.4 4.2 5.0 5.5 -40 -15 10 35 60 85 0 0.5 1.0 1.5 2.0 2.5 3.0
VSUPPLY (V) TEMPERATURE (°C) VCM (V)
MAX9910 toc06
150 6 4
100 5 3
50 4 2
0 IB-
3 1
VOS (µV)
IB (pA)
-50
IB (pA)
2 0
-100
1 -1
-150
0 IB+ -2
-200
-250 -1 -3
-300 -2 -4
-350 -3 -5
-40 -15 10 35 60 85 -40 -15 10 35 60 85 -0.5 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5
TEMPERATURE (°C) TEMPERATURE (°C) VCM (V)
MAX9910 toc09
MAX9910 toc07
-10
120
-20
-20
100 -30
-40
CMRR (dB)
CMRR (dB)
-40
PSRR (dB)
80
-60 -50
60
-60
-80
40 -70
-80
-100 20
-90
-120 0 -100
0.1 1 10 100 1k 10k -40 -15 10 35 60 85 1 10 100 1k 10k 100k
FREQUENCY (Hz) TEMPERATURE (°C) FREQUENCY (Hz)
_______________________________________________________________________________________ 5
200kHz, 4µA, Rail-to-Rail
I/O Op Amps with Shutdown
MAX9910–MAX9913
MAX9910 toc12
MAX9910 toc10
MAX9910 toc11
VOL = VOUT - VSS
0.5 RL = 1kΩ RL TO VDD
100 RL = 5kΩ
0.2
0.1 100
0 RL = 5kΩ
10 RL = 100kΩ
-0.1
RL = 100kΩ 10
-0.2 RL TO VSS
-0.3 VOH = VDD - VOUT
-0.4 1 1
1.8 2.6 3.4 4.2 5.0 5.5 -40 -15 10 35 60 85 -40 -15 10 35 60 85
SUPPLY VOLTAGE (V) TEMPERATURE (°C) TEMPERATURE (°C)
40 90
100 100 RL = 5kΩ
PHASE (DEGREES)
RL = 5kΩ 20 45
GAIN (dB)
AVOL (dB)
AVOL (dB)
80 80 PHASE
RL = 1kΩ 0 0
RL = 1kΩ
60 60
-20 -45
40 40
-40 -90
20 20 -60 -135
0 0 -80 -180
-40 -15 10 35 60 85 -40 -15 10 35 60 85 1 10 100 1k 10k 100k 1M
TEMPERATURE (°C) TEMPERATURE (°C) FREQUENCY (Hz)
AV = 1000V/V MAX9912/MAX9913
80 180 -15
GAIN -20
60 135
-25
40 90
PHASE (DEGREES)
-35
CROSSTALK (dB)
-40
THD+N (dB)
20 45
GAIN (dB)
PHASE -45
0 0 -60
-55
-20 -45
-80 -65
-40 -90
-135 -75 VOUT = 2VP-P
-60
-100
-80 -180 -85
-100 -225 -120 -95
1 10 100 1k 10k 100k 1M 10 100 1k 10k 100k 10 100 1k 10k
FREQUENCY (Hz) FREQUENCY (Hz) FREQUENCY (Hz)
6 _______________________________________________________________________________________
200kHz, 4µA, Rail-to-Rail
I/O Op Amps with Shutdown
MAX9910–MAX9913
Typical Operating Characteristics (continued)
(VDD = 3V, VSS = VCM = 0V, RL to VDD / 2, TA = +25°C, unless otherwise noted.)
MAX9910 toc20
AV = 1V/V
7000 FOR AV = 10V/V
NO RISO NEEDED VDD
6000
VOLTAGE NOISE (nV/√Hz)
1V/div
5000
RISO (Ω)
1000 4000
3000
OUTPUT
2000
500mV/div
1000 IN+ = VDD / 2
AV = 1V/V
100 0
1 10 100 1k 10k 100k 10 100 1000 10,000 500ns/div
FREQUENCY (Hz) CLOAD (pF)
1.5V
OUTPUT OUTPUT
OUTPUT 50mV/div
50mV/div
0V
AV = 1V/V AV = 10V/V
IN+ IN+
1V/div 100mV/div
OUTPUT OUTPUT
1V/div 1V/div
10µs/div 100µs/div
_______________________________________________________________________________________ 7
200kHz, 4µA, Rail-to-Rail
I/O Op Amps with Shutdown
Typical Operating Characteristics (continued)
MAX9910–MAX9913
(VDD = 3V, VSS = VCM = 0V, RL to VDD / 2, TA = +25°C, unless otherwise noted.)
MAX9910 toc28
MAX9910 toc27
AV = +1V/V AV = +1V/V
8 VOUT = 100mVP-P 3 VOUT = 2VP-P
CLOAD = 15pF CLOAD = 15pF
6
2
4
1
2
GAIN (dB)
GAIN (dB)
0 0
-2 -1
-4
-2
-6
-8 -3
-10 -4
1 10 100 1000 1 10 100
FREQUENCY (kHz) FREQUENCY (kHz)
AV = 1V/V AV = 1V/V
3.5 RL = 1MΩ
IN+
3.0 50mV/div
OVERSHOOT (%)
2.5
RL = 100kΩ
2.0
1.5
OUTPUT
50mV/div
1.0
0.5 RL = 10kΩ
0
0 20 40 60 80 100 20µs/div
CLOAD (pF)
AV = 1V/V
IN+
50mV/div
OUTPUT
50mV/div
20µs/div
8 _______________________________________________________________________________________
200kHz, 4µA, Rail-to-Rail
I/O Op Amps with Shutdown
Pin Description
MAX9910–MAX9913
PIN
MAX9911 MAX9911 NAME FUNCTION
MAX9910 MAX9912 MAX9913
(WLP) (SC70)
A1 1 1 — — IN+ Noninverting Amplifier Input
A2 2 2 4 4 VSS Negative Supply Voltage
B1 3 3 — — IN- Inverting Amplifier Input
C1 4 4 — — OUT Amplifier Output
B2 5 6 8 10 VDD Positive Supply Voltage
C2 — 5 — — SHDN Shutdown
— — — 1 1 OUTA Amplifier Output Channel A
— — — 2 2 INA- Inverting Amplifier Input Channel A
— — — 3 3 INA+ Noninverting Amplifier Input Channel A
— — — — 5 SHDNA Shutdown Channel A
— — — — 6 SHDNB Shutdown Channel B
— — — 5 7 INB+ Noninverting Amplifier Input Channel B
— — — 6 8 INB- Inverting Amplifier Input Channel B
— — — 7 9 OUTB Amplifier Output Channel B
Detailed Description load. These devices can drive a 5kΩ load with swings
to within 60mV of the rails. Figure 1 shows the output
Featuring a maximized ratio of GBW to supply current,
voltage swing of the MAX9910–MAX9913 configured as
low operating supply voltage, low input bias current,
a unity-gain buffer powered from a single 3V supply.
and rail-to-rail inputs and outputs, the MAX9910–
MAX9913 are an excellent choice for precision or gen- Low Input Bias Current
eral-purpose, low-current, low-voltage, battery-powered The MAX9910–MAX9913 feature ultra-low 1pA (typ)
applications. These CMOS devices consume an ultra- input bias current. The variation in the input bias current
low 4µA (typ) supply current and a 200µV (typ) offset is minimal with changes in the input voltage due to very
voltage. For additional power conservation, the high input impedance (in the order of 1GΩ).
MAX9911/MAX9913 feature a low-power shutdown
mode that reduces supply current to 1nA (typ), and Applications Information
puts the amplifiers’ output in a high-impedance state.
These devices are unity-gain stable with a 200kHz Driving Capacitive Loads
GBW product, driving capacitive loads up to 30pF. The The MAX9910–MAX9913 amplifiers are unity-gain sta-
capacitive load can be increased to 250pF when the ble for loads up to 30pF. However, the capacitive load
amplifier is configured for a 10V/V gain. can be increased to 250pF when the amplifier is config-
ured for a minimum gain of 10V/V. Applications that
Rail-to-Rail Inputs and Outputs require greater capacitive-drive capability should use
All of the MAX9910–MAX9913 amplifiers have a parallel- an isolation resistor between the output and the capaci-
connected n- and p-channel differential input stage that tive load (Figure 2). Also, in unity-gain applications with
allows an input common-mode voltage range that relatively small RL (approximately 5kΩ), the capacitive
extends 100mV beyond the positive and negative sup- load can be increased up to 200pF.
ply rails, with excellent common-mode rejection.
Power-Supply Considerations
The MAX9910–MAX9913 are capable of driving the out- The MAX9910–MAX9913 are optimized for single 1.8V
put to within 5mV of both supply rails with a 100kΩ to 5.5V supply operation. A high amplifier power-supply
_______________________________________________________________________________________ 9
200kHz, 4µA, Rail-to-Rail
I/O Op Amps with Shutdown
rejection ratio of 95dB (typ) allows the devices to be
MAX9910–MAX9913
powered directly from a battery, simplifying design and RAIL-TO-RAIL OUTPUT VOLTAGE RANGE
extending battery life.
3V
Power-Up Settling Time IN_
The MAX9910–MAX9913 typically require 5µs after
1V/div
power-up. Supply settling time depends on the supply
voltage, the value of the bypass capacitor, the output
0V
impedance of the incoming supply, and any lead resis-
tance or inductance between components. Op-amp 3V
settling time depends primarily on the output voltage OUT_
and is slew-rate limited. Figure 3 shows the MAX991_ in
a noninverting voltage follower configuration with the 1V/div
input held at midsupply. The output settles in approxi-
mately 18µs for VDD = 3V (see the Typical Operating 0V
Characteristics for power-up settling time). 200µs/div
Shutdown Mode
Figure 1. Rail-to-Rail Output Voltage Range
The MAX9911/MAX9913 feature active-low shutdown
inputs. The MAX9911/MAX9913 enter shutdown in 2µs
(typ) and exit in 30µs (typ). The amplifiers’ outputs are
in a high-impedance state in shutdown mode. Drive
SHDN low to enter shutdown. Drive SHDN high to
enable the amplifier. The MAX9913 dual-amplifier fea- RISO
tures separate shutdown inputs. Shut down both ampli- MAX9910–
MAX9913
fiers for the lowest quiescent current.
RL CL
Power-Supply Bypassing and Layout
To minimize noise, bypass VDD with a 0.1µF capacitor
to ground, as close to the pin as possible.
RL
Good layout techniques optimize performance AV = ≈ 1V/V
RL + RISO
by decreasing the amount of stray capacitance and
inductance to the op amps’ inputs and outputs.
Minimize stray capacitance and inductance by placing Figure 2. Using a Resistor to Isolate a Capacitive Load from
the Op Amp
external components close to the IC.
5.5V
0V
IN- VDD
100kΩ
MAX991_ OUT
IN+
VSS
100kΩ
10 ______________________________________________________________________________________
200kHz, 4µA, Rail-to-Rail
I/O Op Amps with Shutdown
Pin Configurations
MAX9910–MAX9913
TOP VIEW
MAX9911
MAX9910 MAX9911
IN+ VSS
A1 A2
IN+ 1 5 VDD IN+ 1 SHDN 6 VDD
IN- VDD
B1 B2 VSS 2 VSS 2 5 SHDN
OUT SHDN
C1 C2 IN- 3 4 OUT IN- 3 4 OUT
MAX9912 MAX9913
INA- 2 9 OUTB
INA- 2 7 OUTB
INA+ 3 8 INB-
INA+ 3 6 INB-
VSS 4 SHDNA 7 INB+
SOT23 µMAX
Chip Information
PROCESS: BiCMOS
______________________________________________________________________________________ 11
200kHz, 4µA, Rail-to-Rail
I/O Op Amps with Shutdown
Package Information
MAX9910–MAX9913
For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. Note that a “+”, “#”, or “-” in the
package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the
package regardless of RoHS status.
SC70, 5L.EPS
12 ______________________________________________________________________________________
200kHz, 4µA, Rail-to-Rail
I/O Op Amps with Shutdown
Package Information (continued)
MAX9910–MAX9913
For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. Note that a “+”, “#”, or “-” in the
package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the
package regardless of RoHS status.
______________________________________________________________________________________ 13
200kHz, 4µA, Rail-to-Rail
I/O Op Amps with Shutdown
Package Information (continued)
MAX9910–MAX9913
For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. Note that a “+”, “#”, or “-” in the
package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the
package regardless of RoHS status.
14 ______________________________________________________________________________________
200kHz, 4µA, Rail-to-Rail
I/O Op Amps with Shutdown
Package Information (continued)
MAX9910–MAX9913
For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. Note that a “+”, “#”, or “-” in the
package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the
package regardless of RoHS status.
MARKING
1
21-0078 J 1
______________________________________________________________________________________ 15
200kHz, 4µA, Rail-to-Rail
I/O Op Amps with Shutdown
Package Information (continued)
MAX9910–MAX9913
For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. Note that a “+”, “#”, or “-” in the
package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the
package regardless of RoHS status.
10LUMAX.EPS
α
16 ______________________________________________________________________________________
200kHz, 4µA, Rail-to-Rail
I/O Op Amps with Shutdown
Revision History
MAX9910–MAX9913
REVISION REVISION PAGES
DESCRIPTION
NUMBER DATE CHANGED
2 10/10 Added WLP package 1, 2, 9, 11
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________ 17
© 2010 Maxim Integrated Products Maxim is a registered trademark of Maxim Integrated Products, Inc.