Professional Documents
Culture Documents
SB LM2500 Ind 312 R1
SB LM2500 Ind 312 R1
GE Aviation
AeroDerivative Engine Operation
SERVICE BULLETIN LM2500-IND-0312
Revision 1
September 09, 2020
GE PROPRIETARY INFORMATION
Remove Service Bulletin LM2500-IND-0312, dated 05 June 2020, in its entirety, and replace with
Service Bulletin LM2500-IND-0312, Revision 1, dated 9 September 2020.
The revision bars in the left margin indicate actual text changes. Revision bars are not used to
indicate format and sequence changes.
CAMPAIGN
PAGE 1 of 7
LM2500-IND-0312
Revision 1
September 09, 2020
I. PLANNING INFORMATION
A. Effectivity
(1) PRODUCTS:
LM2500+ DLE gas turbines, serial numbers 559051, 559052, 559054 through
559061, 559063, 559102 through 559124, 559127, 559128, 559129, 559131
through 559154, 559156, 558157, 558158, 559160, 559161, and 559901,
are affected by this Service Bulletin.
PAGE 2 of 7
B. Reason
(1) Objective:
(2) Condition/Events:
(3) Cause:
C. Description
This Service Bulletin provides instructions to coat the HPC stage 0 blisk.
D. Compliance
E. Manpower
No additional man-hours are required to accomplish this Service Bulletin after
exposure of the HPC rotor stage 0 blisk during a scheduled maintenance interval.
F. Tooling
PAGE 3 of 7
G. Material Requirements
For cost and lead time estimates, contact your GE Customer Service Manager.
I. Material Interchangeability
Not applicable.
J. Material Disposition
Inspect stage 0 blisk for continued serviceability and add Sermetel coating.
K. Material Reidentification
For material reidentification, contact your GE Customer Service Manager.
L. References
M. Previous Modifications
None.
For instructions required to accomplish this Service Bulletin, contact your GE Customer
Service Manager.
PAGE 4 of 7
Compliance with this Service Bulletin must be properly documented. The preferred
method of documentation is to directly enter the compliance details through My
Dashboard at https://mydashboard.gepower.com. If you do not have access to My
Dashboard, please visit https://www.gepower.com to register and request access. Within
My Dashboard, you can access all of the bulletin data associated with your equipment by
selecting “Aero Bulletins”.
Should you have any issues, please contact the FDQ Team at aerotechdata@ge.com.
PAGE 5 of 7
PAGE 6 of 7
PAGE 7 of 7
GE PROPRIETARY INFORMATION - Subject to the restrictions on the cover or first page.