Professional Documents
Culture Documents
Topics Problem Set 3 - Statics of Rigid Bodies (Final) 1ST Term 2020-2021
Topics Problem Set 3 - Statics of Rigid Bodies (Final) 1ST Term 2020-2021
COLLEGE OF ENGINEERING
DEPARTMENT OF CIVIL ENGINEERING
SITUATION 2. The homogeneous cylinder of weight 100N is placed on an inclined surface of negligible friction. The cylinder is
prevented from moving by the vertical rod DB, which is moving by the vertical rod DB, which is connected to the center of the
cylinder by a rope. Assuming sufficient friction between the bar and the cylinder. (See Fig. STAT- 02)
SITUATION 3. The ring shown is subjected to the three forces P, Q and S. P = 35 kN and Q = 45 kN. (See Fig. STAT-03)
7. Determine the angle α in degrees so that the resultant of the three forces is 70 kN acting horizontally to the right.
a. 22° b. 23° c. 24° d. 25°
8. If α = 56°, find the magnitude of the force S (kN) such that the resultant force is horizontal to the right
a. 45 b. 51 c. 47 d. 49
9. Find the magnitude of the force S (kN) such that the three forces are in equilibrium.
a. 46.61 b. 45.33 c. 49.02 d.51.44
10. The uniform bar and the homogeneous cylinder each have a mass of 24 kg (See Fig. STAT-04). The static coefficient of friction
is μs at A, B, and C (the three points of contact). Assuming equilibrium, what is the smallest value of μs necessary for equilibrium?
a. 0.24 b. 0.78 c. 0.50 d. 0.32
FIGURES:
Fig. STAT-03
Fig. STAT-04