Professional Documents
Culture Documents
Safety Data Sheet: 1 - Product Identification
Safety Data Sheet: 1 - Product Identification
Safety Data Sheet: 1 - Product Identification
1 – PRODUCT IDENTIFICATION
TRADE SECRET STATEMENT: The specific chemical identity and/or the exact percentage of composition
has been withheld as a trade secret.
PAGE 1 of 4
POLY-FLOC 108
Safety Data Sheet
4 – FIRST-AID MEASURES
EYES: Flush with large amounts of water, lifting upper and lower lids occasionally. Get medical attention if
irritation persists. SKIN: Wash exposed areas thoroughly with soap and water. Remove contaminated
clothing and launder before reuse. If skin feels slippery, continue washing until slick feeling is gone. Contact
a physician if irritation permists. INGESTION: Give large quantities of water. DO NOT induce vomiting. If
vomiting occurs administer additional fluids. Contact a physician for further directions. Never give anything
by mouth to an unconscious person. INHALATION: Remove individual to fresh air. If breathing is difficult,
give oxygen. Contact a physician if irritation persists.
5 – FIRE-FIGHTING MEASURES
When responding to a fire involving this product, personal protection equipment must be worn that is
appropriate to the chemicals involved in the fire, as well as respiratory protection. If it can be done safely and
without risk, stop any release of chemical at the source. Move undamaged containers away from the vicinity
of the fire if it can be done safely. Water spray may be used in cooling equipment and containers that have
been exposed to heat and/or flame. Avoid spreading burning material with water used for cooling purposes.
FLASHPOINT: >199.4°F
EXTINGUISHING MEDIA: Water fog or spray, Foam, Dry Powder, Carbon Dioxide (CO2).
SPECIAL FIRE FIGHTING PROCEDURES: Contaminated surfaces will be extremely slippery.
UNUSUAL FIRE AND EXPLOSION HAZARDS: None
SPILL PROCEDURES: Only trained personnel equipped with proper protective gear should be permitted in
the area. Stop spill at source. Reclaim material if possible for reuse. Containerize contaminated material for
disposal. After all visible traces have been removed flush area thoroughly with water.
WASTE: Dispose of all waste in accordance with local, state and federal regulations. Care must be taken
when using or disposing of chemical materials and/or their containers to prevent environmental
contamination.
HANDLING & STORAGE: This product is a mild irritant. Eye contact will cause minor irritation. Individuals
sensitive to alkaline materials may develop dermatitis upon prolonged or repeated contact with product
concentrate. Wear impervious gloves and safety glasses or goggles when handling product. If dust/mist
residuals are present at or above the TLV respiratory protection must be worn. Wear additional protective
clothing as necessary to minimize contact with product.
8 – EXPOSURE CONTROLS / PERSONAL PROTECTION
RESPIRATORY PROTECTION: Atmospheric levels should be maintained below the exposure guidelines.
When respiratory protection is required, use an approved air-purifying respirator. When exposure guidelines
may be greatly exceeded, use an approved positive pressure self-contained breathing apparatus. A
respiratory protection program that meets OSHA 1910.134 and ANSI Z88.2 requirements must be followed
whenever workplace conditions warrant a respirator’s use.
PROTECTIVE CLOTHING: Chemical safety glasses, impervious gloves and an apron.
PAGE 2 of 4
POLY-FLOC 108
Safety Data Sheet
9 – PHYSICAL / CHEMICAL PROPERTIES
STABILITY: Stable
HAZARDOUS DECOMP.: None known
INCOMPATIBILITY: Strong oxidizing agents
HAZARDOUS REACTIONS: None known
11 – TOXICOLOGICAL INFORMATION
TOXICOLOGICAL PROPERTIES: The toxicological properties of this chemical mixture as a whole have not
been thoroughly investigated.
LISTED CARCINOGEN: This material does not contain any known or suspected carcinogens.
MEDICAL CONDITION AGGRAVATED: None known
12 – ECOLOGICAL INFORMATION
ENVIRONMENTAL FATE: The environmental properties of this chemical mixture have not been thoroughly
investigated.
13 –DISPOSAL CONSIDERATIONS
WASTE DISPOSAL: Dispose of all waste product and wastes generated from this product in accordance
with local, state, and federal regulations. Assume wastes are hazardous unless characterization
demonstrates otherwise. Handle empty drums as if they contain chemical residual until they have been
thoroughly decontaminated.
14 – TRANSPORTATION INFORMATION
Contents of this MSDS comply with the OSHA Hazard Communication Standard 29CFR 1910.1200
PAGE 3 of 4
POLY-FLOC 108
Safety Data Sheet
SARA SECTION 313: This product DOES NOT contain toxic chemical(s) subject to the reporting
requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act and 40 CFR
Part 372.
16 – OTHER INFORMATION
HMIS RATING:
HEALTH: 2, FLAMMABILITY: 1, REACTIVITY: 0, PERSONAL PROTECTION: C
PAGE 4 of 4
POLY-FLOC 108