Professional Documents
Culture Documents
API 571+à+ç+å+
API 571+à+ç+å+
7) 885°F (475 oC) Embitterment can not be detected by which of the following
method?
A) Metallographic examination
23) When in steam generating equipment is a balance between the heat flow
from the combustion of the fuel and the generation of steam within the water
wall or generating tube gets disturb leads to damage…
A) Steam Blanketing
35) When unsupported branch diameter is 3/4th near a compressor, what damage
mechanism you suspect?
A) Vibration induced fatigue.
37) Material cracked during PWHT, what could be the cause / Name of damage?
A) Reheating Cracking
39) a question on Galvanic Coupling from Table 4- 4. for example which following
combination is potential for GC?
A) CS / SS 300 series.
46) Which is prone for cooling water corrosion in fresh / brackish water?
A) HAZ of ERW CS materials.
53) What are the critical factors for Flue-Gas Dew-Point Corrosion?
A) Concentration of contaminants (sulfur and chlorides) and operating
temperature.
59) What inspection methods are used for Caustic Corrosion detection?
A) UT scans and radiography
63) Table 4 – 6 mpy and temperature of various metals. Questions like CS can be
used till …. Temperature or at this temperature which metals can be used.
71) Appearance Pits usually form on the surface and may contain soot or
graphite dust DM?
A) Metal dusting.
72) In SS and high alloy steel how metal dusting appears?
A) Local, appearing as deep, round pits
76) What is the temperature above which nitiridaing begins and becomes severe?
A) 316 Deg C and 482 Deg C.
84) What metals are susceptible and more resistant for Caustic stress corrosion
cracking?
A) SS susceptible and Nickel base more resistant
87) What metals are prone for ammonia Stress Corrosion Cracking (SCC)
A) Copper alloys.