Professional Documents
Culture Documents
Unit Description, TX Board
Unit Description, TX Board
Unit Description, TX Board
DESCRIPTION
Copyright
Disclaimer
No part of this document may be reproduced in any form without the written
permission of the copyright owner.
The contents of this document are subject to revision without notice due to
continued progress in methodology, design and manufacturing. Ericsson shall
have no liability for any error or damage of any kind resulting from the use
of this document.
Trademark List
Contents
1 Product Overview 1
1.1 Purpose 1
1.2 Variants 2
1.3 Technical Details 2
1.4 Hardware and Software Compatibility 3
2 Function Description 4
3 Dimensions 5
4 Power 6
4.1 Fuses 6
5 Interfaces 6
5.1 Signal and Power Interfaces 6
5.2 Operator Interfaces 6
1 Product Overview
Figure 1 TX Board
1.1 Purpose
The TX board is used for downlink baseband processing such as transport
channel handling, encoding, modulation, spreading and channel combining.
1.2 Variants
The following variants exist:
• TX R1
• TX R2
• TX6-01
• TX6-02
• TX6-03
• TX6HS-03
• TX6HS-04
• TX6HS-06
The list below shows the hardware capability of the TX6HS-03, TX6HS-04
and TX6HS-06 boards.
• DCH
• HS-PDSCH
2 Function Description
The block diagrams below show the main functions of the unit.
Spreader
Temperature Voltage
sensor supervision
P015096C
Timing signals
Timing circuits
RAX - TX bus Seria- Gamma bus
lizer to TRX/RU
TX combination functions
Temperature Voltage
sensor supervision
DL signal processing
-48 V DC power Power
DC/DC
P015097D
TX boards are available with various capacity and capabilities. Extra capacity
is added by license keys or by adding more boards for load-sharing up to
maximum capacity. Additional TX boards can be added for redundancy when
low capacity is required.
• Encoding
3 Dimensions
4 Power
4.1 Fuses
The unit has no internal fuses.
5 Interfaces